What is this bs forced on us use pre DPD labels so they go to authorisation who then do a damn grading system on them.
I just want to sell them to the person who's buying them. Not mess about for weeks as they go somewhere else then they then go on to the buyer
Wtf is this shit

Subreddit Patreon
First Prev
Anglestan
Augustus 5, 1923
Facility 9, Mancheston
Colonel Jacobs
His hands flew through the folders General Jorgenson and Colonel Thatcher had. There were dozens of them, stacked upon each other all filed in alphabetical order. It had only been a few days since he had woken up from his coma and visited his home— now his mother’s grave. He clenched his fists at the thought. The grief and rage threatened to bubble and spill over once again. He took a deep breath and dragged out the exhale, almost to the point where he had emptied out his lungs.
He was the only one with clearance, and so he couldn’t disclose any of what he learned with his team. They would simply have to trust him and his judgment. Which he was sure they would do. His hands went over one of the folders skimming through it. There were multiple secret projects, but the ones with the most notes were Project S.T.A.R, Project L.U.N.A.R.I, Project R.E.V.I.V.E, Project D.A.W.N, and Project T.E.M.P.L.A.R.
The colonel decided to start with the most notes and papers. Project D.A.W.N.
He skimmed through the notes, reading through some of the details and highlighted words. Project D.A.W.N, the espionage project Thatcher had started placed two spies in Verlin who were to report directly to a Crescent general named Sienna Moretti who was apparently on humanity’s side.
So I was right. There was an espionage element. With the recent attacks and Thatcher’s death, however, it’s safe to assume that it had somehow failed. Either they got found out or they betrayed us. Both seem very likely, but if they were found out, it would be possible that they had died.
He read through all of it before setting the folder down. There were no new notes recently. He sighed and assumed that Project DAWN was a failure. Whether or not the agents were still alive and well, it was too risky to check if they had been compromised. It was better to assume that they had been and cut all contact. The only way to find out now was to go there himself and check. I can’t contact them again. There’s no telling if it would still be Moretti or the agents who would see my messages. It’s a big risk, and judging by the state of things, best to assume it failed.
He picked up another folder. This one had the label ‘under development’ on the folder. Project Templar. He opened the folder and was instantly met with a blueprint and drawings of a massive bipedal machine. It looked humanoid with strange proportions and was supposed to be standing at an impressive 30 meters, or 100 feet. The Titanic Engine Mech for Personal Land Assault and Reconnaissance.
It was apparently a joint project with the Church of Sol, utilizing new and advanced technologies he hadn’t heard of. A 203mm Gatling cannon on one arm, while the other had three different weapons. A massive firestarter that utilized a new type of fuel mixture that could theoretically spew flames a kilometer away using a high-pressure nozzle. The fuel was ignited using an electrical spark. The second weapon was a high-powered light weapon that fired a single powerful beam of focused light that was even further amplified by layers of focusing lenses that could increase its output several times. Its third weapon was… a dust domina?
Mark read through the specifications of the so-called ‘sand cannon’ weapon. It was a massive cannon that accelerated tiny particles several times. Each particle was to be electrically charged, and it would travel at immense speeds. Near impossible speeds. The resulting impact of a microscopic particle at such speeds would be enough to form a small crater and punch through armor like it was nothing. This weapon would fire multiple at the same time, which could literally eat away at anything on the opposing end.
In terms of secondary weapons, the titan had two missile launch chambers in front of its shoulder each containing about 40 missiles, and two massive howitzer cannons on top of it. Both are 800mm in caliber. It had massive stumpy legs that served as bunkers for a small platoon on each leg. Each leg had machine dominas and 155mm cannons. Its chassis held two nuclear reactors inside providing for its power and weaponry. Its armor was the thickest and most ridiculous he’d ever read. Two meters of heavy steel armor.
How far are we in terms of technology? This thing looks like it came out of an H.G. Wells sci-fi novel. He thought, shaking his head. It was over the top, but there was no denying its combat capabilities. If it was already under-developed then it must be the first prototype. This has already been approved. Guess I better see it for myself later and check how it's coming along. Construction apparently started just a few months before the invasion.
Next was project L.U.N.A.R.I. It was a project involving Six. “Huh,” he said, continuing to read on.
The Light Undone: Nocturnal’s Adaptive Resistance Initiative. As he read further, his eyes widened. The reason why Six was so special wasn’t just because of her immunity to all strigoi weaknesses, but because of her impressive ability to turn any true born strigoi like her. She could transfer her strain like any other strigoi and transform them into a version of hers. It however only seemed to work for naturally born strigoi. The new species of ‘half-breeds’ were called ‘Blessed Children’ as Thatcher had coined in the folder.
The plan was to turn all willing true-born hemolite strigoi into these blessed children. Able to withstand the sun. Immune to silver. Free from the dependency on blood. They could remove all the weaknesses of the strigoi and after the war— make it possible to integrate them into society as normal citizens living on the surface. The project folder also made mentions of a city-wide draft in Dante and highlighted the possibility of turning all Dantenite true born strigoi into these blessed children and renaming them as ‘Lunari’. A mix of the dark and the light. The light of Sol reflected in the children of the night.
“Thatcher, what the fuck have you been up to…” Mark whispered to himself.
While it was true that it could help in the war effort by utilizing Six and the dantenite population, it would also invite some unforeseen problems and consequences. Would humanity be okay with the Lunari? Would the world even be ready for them? Strigoi who were immune to the sun. They wouldn’t be impossible to kill, but they would be immensely more powerful if we were to take away their inherent weaknesses. This is a gamble. Its gain would only be seen during the war period, but its unintended effects on society could be catastrophic.
He frowned, setting the folder down. It was obviously Thatcher’s main plan; seeing as all her moves could be traced to the path of the eventual completion of this project. It seemed dangerous in the long run, but the duskwalkers and dantenites had been monumental in the war effort. Maybe it was the time the world started to accept them more. Isolation and segregation was definitely not the way to disperse fears and foster understanding.
If Thatcher thinks this is the next step forward… then I’ll put my faith in her plans.
Next up was Project S.T.A.R, or the Superior Tech and Adaptive Resistance. An upgrade to the current hemolite weapons and gear by using new researched studies. The Starfire Pattern Domina. The SFD-23 This thing features a new loading system and magazine, ditching the rotating cylinder most domina used, or the rotating helix magazine design of the current hemolite standard BM-16 domina.
The new domina had its magazine like a box… a strange design but it was certainly easier to handle than the bulky cylinders the helical mags used. In terms of ergonomics, it was smoother and fit more. Its placement however was on top of the domina, just above the barrel. Most of the weapon were to be made of lightweight polymers and the barrel itself were to be crafted out of reinforced aluminium. In addition to that, it had a 10-inch bayonet attached to it.
There were other new things as well, such as the composition of the bullet. Looking at the conceptual cross-section designs, Mark read through its description and how it would function. A .308 cased telescoped bullet covered in a silver jacket with break-away petals surrounding the main body. Inside the jacket was a penetrator core that was to be made of depleted uranium. It had a small amount of incendiary compound and… powdered white phosphorus behind an explosive compound. The thin silver jacket would deform and trigger the explosive compound inside the body. It would blow up causing massive internal damage and release the incendiary materials into the body with the flecks of powdered white phosphorus. The penetrator core could still potentially keep going and hit a second target, or punch through heavily armored targets.
Part of the new Project S.T.A.R was overhauling the armor and gear of not just the Hemolites but the Hunters as well. Starfire Mk 1. Carapace Armor. Carapace? It looked like plates of steel covered in a rubberized coat. It was supposed to be slipped on over the original hemolite body armor. It added a spring-loaded wrist blade to the gauntlet, a thicker coat made of resistant materials, and added extra padding for the knees, shoulders, and elbows.
However, the hemolites weren’t the only ones mentioned in the folder. It was to serve the Hunters as well. “Hunters…” Mark said. “August’s group is part of this initiative too.” He flipped through some of the pages. There were blueprints and drawings of an armored suit. A mechanized suit even smaller and more compact than the jotunn units. The Mark 1 STR battlesuit. It was supposed to hug the wearer’s frame and increase their overall power. It was supposed to be built of titanium alloy and a heavy steel frame with composite armor. It had a cooling system, life support systems that could recycle bodily fluids, and an exoskeleton frame that could increase the wearer’s strength and speed.
However, the real eye-opener was Thatcher’s notes. She had been ranting about the new human evolution, and how the Hunters were the first of the ‘Solari’. She wanted to enhance human genetics and push past the peak of human ability to reach greater heights. Implants and restructuring of the anatomy to make it more efficient. Using the blood of the goddess herself. She must have lost it. These are the ramblings of a lunatic. At least… if she didn’t mention the goddess. Why was the goddess important here?
The writings ended with the words: “See Project R.E.V.I.V.E, for more details.”
Mark eyed the final folder. His hands shook as he reached out to take it. Flipping it open, his hands nearly dropped it in shock. The goddess Helena was alive. There were pictures of her naked form floating in a giant tube of fluid. There were more of Thatcher’s ramblings and excited rants about the possibilities of such a discovery. Resurrection, Enhancement, and Veneration: Implementation of Visionary Evolution.
The goddess is alive?! According to the file, she’s currently under the Cathedral of New Lundun. Not only that, but the file also detailed the extraterrestrial tech that lay beneath the cathedral. So the goddess is real and she’s— not really a goddess, but rather, a vampyr who created herself a human body to stand in the sun, and decided that it wants to be on humanity’s side… what the fuck.
Mark’s frown and confusion only increased as he read on. Thatcher’s notes seemed to nearly descend into madness as she had written about creating ‘the first hundred’, alluding to the 100 members of the Hunters division. Her plan was to revive the goddess, and with her help and expertise in genetics— use her DNA to transform the Hunters into demi-humans. Super soldiers. Literal children of the goddess Helena. They would then don the STR battlesuits, the first of the superhuman warriors to defend humanity. Solari.
Their lightning-speed advancement into technology was heralded by studying the alien tech, which deepened the understanding of physics and engineering. Nuclear technologies, chemical warfare, new material sciences, the mechs, and walkers, it was spearheaded by trying to reverse-engineer technology centuries ahead of our own… for the past hundred years. It wasn’t completely stolen, however. More or less borrowed ideas that had been made into our own with our own designs and implements. Still, the speed at which the Church and the military had deciphered such advancements all by themselves was… impressive to say the least.
Still, the fact that the goddess was alive, and could be brought back was big news. Checking the file for details, he found that the previous general, Jorgenson, had already approved this project. It was their next step as soon as they returned from New Amsterdam; which never happened.
If Helena was alive, then she could end this war swiftly, or at the very least help greatly like she once did during the War of Darkness. Having the goddess back would throw a massive wrench in the Crescent’s plans. It would certainly be something they wouldn’t expect. Not even I expected this, since many sources say that the goddess had already ascended to watch over humanity, while conspiracy theorists claim she had died in battle and that the Church was worshiping a corpse. This could be the trick up our sleeves that no one would even consider.
The colonel quickly got up from his seat and gathered the main files he had read. He placed them in a bag and rushed outside of his office in Facility 9. He went over to a nearby room and flicked the lights on. “We need to go,” he said. In an instant seven hemolite soldiers got up from whatever they were doing and instantly stood in line.
“Sir! Whatever you need of us, sir,” the group said in unison.
They were Hemo-1. His former squad members. He had taken up Louis' suggestion that they be his personal security detail. It was a shame that he had basically placed the best hemolite team out of commission, but after all he had been through he convinced himself that he could be just a little selfish. He didn’t want to lose any more friends. Not on his watch. Not while he was in an office, and they were out fighting.
“We’re going to New Lundun. Better pack up, it’s going to be a long night.”
“Mark,” Olivia said.
Jacobs turned to her direction and gave her a nod.
“Colonel, sir, may I ask where in New Lundun?”
“Liv, you don’t need to do that with me. Please. I give all of you special permission,” the colonel groaned. “It’s so weird. I mean, ‘captain’ was bad enough, but now you’re acting like I’m an authority figure.”
“You… are, though,” Emma shrugged.
“I’m your friend, and Liv I’m literally your partner. Unless you have some kind of weird fetish, save it for later.”
Olivia grinned, shaking her head. “Duly noted!” she chirped.
“That’s better,” Mark chuckled. “Now come on, we have a cathedral to visit.”
“Uhh, I’m not sure if you noticed, but we’re kinda… strigoi?!” Louis groaned. “I’d burn the moment I step in that place! Plus, it’s coated in silver! Anything I even touch will give me burns!”
“Oh come on, Lou. You have fucking gloves on. As long as you’re not a clumsy dumbass you’ll be fine… oh wait.’
“Uh huh, just sayin’ what I think, boss.”
The group headed out and Mark said something on his radio. He then sat on the ground, making his joints pop. The rest of the squad shrugged and followed his example, sitting down on the grass and waiting for… nothing. Charles and Zach looked at each other in confusion. “Uh, sir?” they asked. “Aren’t we supposed to be heading out and traveling right now?”
“Oh yeah, we’re just waiting.”
“Foooor…?”
The colonel gave them a smirk as a loud noise began to make itself known. A hummingbird transport appeared out of the distance and stopped right above them, slowly descending into the grass. “Being colonel has its perks,” Mark said with a smile. He stood up and hopped inside the hummingbird as soon as it landed. “Come on now! We’ve got work to do! Last one aboard buys everyone food later!”
Emma zipped in before Mark could even finish his sentence, followed by Olivia, Phineas, Charles, Zach, and then Louis, who sadly took too long to process what the colonel said, and lagged behind.
“Aw, man! Fuck this shit.”
“Rules are rules, Lou. Prepare your wallet later.” Mark grinned.
With a smile, the colonel pulled Olivia to his side, who blushed for a moment before shaking her head. “Take us up! New Lundun Cathedral! How long would it take?” he asked the pilot.
“About an hour and a half!” The pilot replied. “Less if you want to get there as soon as possible!”
“Take your time! The night’s still young.”
The hummingbird started to lift up, taking them into the air. The group settled down in their seats and watched outside the open. Mark opened up a bag inside the hummingbird and took out some ear muffs built for a strigoi. Extremely loud noises were damaging for a strigoi’s enhanced hearing, so the military started implementing ear muffs for them after complaints from early deployments of the hemolite squads.
The trip didn’t take too long. In only an hour and twenty minutes they had arrived at the safe zone of New Lundun, heading straight for the cathedral. The night mass had just ended and people were leaving the cathedral. “Looks like we made it in perfect time!” Mark smiled. They hovered for a few minutes in the air before eventually landing down right in front of the statue of Helena.
As soon as they landed, the colonel and his group left the hummingbird. Mark instructed the pilot to wait for them. He went straight for the cathedral with his group following behind. He entered inside, clearing his throat. “Hello?”
“Well this is surely unexpected,” an old man said, walking up to greet them.
“Great Grandfather Aurelius. It’s uh, an honor.”
“Please. The honor is mine… I see you’re the new colonel. Yes, I’ve heard the news,” he said. “Would you mind telling me your name, young man? As well as your companions, if they feel so. I usually don’t allow duskwalkers here but, I have nothing against them. I’ll make an exception for your group.”
“Thank you, Great Grandfather,” Mark replied. “I am Colonel Mark Jacobs. These are my friends and security detail. Olivia, Zach, Phineas, Charles, Emma, and Louis.”
“I see, and what brings you here?”
“Since Thatcher’s demise, I was given access to her research and project folders upon taking up the title. I’ve learned about what’s under your cathedral,” Mark cleared his throat. “Would it be alright if we could see it? I’d like to check it for myself. Of course, under your permission and guidance, Great Grandfather.”
The church head looked from Mark to his companions. He pulled a slight frown and hummed. “Do these companions of yours have the clearance? Surely, we wish to keep our secrets hidden,” he said. Mark nodded.
“They do not have clearance to know what is in Thatcher’s folders and her findings,” the colonel nodded. “However, I give them permission to accompany me, and should they discover things for themselves, then you have my word and my trust that I can keep them from spilling state secrets.”
The Great Grandfather gave a short pause before ultimately relenting. “Very well,” he let out a sigh. “Follow me.”
Aurelius walked behind the altar and pulled the same lever, which opened the same staircase leading underground, where Jorgenson and Thatcher had once gone. “Over here, colonel,” he said. “I do not know you completely yet, but this is a big deal of trust I am giving you. Perhaps you would be the one to do things that Thatcher could not have.”
Mark nodded, he and his group followed the Great Grandfather down the staircase. It led down to a massive underground facility, with numerous priests, researchers, and scientists. Libraries, records, instruments, and artifacts of old. It was a treasure trove of learning.
“So,” Aurelius cleared his throat. “What would you like to know about?”
“This isn’t all of it,” Mark said. “Thatcher mentioned a living, breathing, Helena.”
His group behind him let out a soft gasp, but they tried their best to hide their surprise.
“Hm,” the Great Grandfather nodded. “Perceptive young man aren’t you? Very well.”
They were then led into another room, behind a set of heavy blast doors. If the whole group were trying to hide their surprise then, now they could barely contain it. Even the colonel stared awestruck at the things he had seen. Despite the near-magical objects around them, the true shock was the massive starship at the end of the hallway. “It’s impressive isn’t it?” Aurelius said. “All of the goddess’ artifacts and items at our disposal, to use and learn from, to integrate into our own. This is why Anglestan is the most powerful nation in the UHT in terms of development. When it comes to industry, however, that would go to the UNA. But we share our secrets with them. All our advancements are handed to them first before any other nation.”
“This is all amazing, Great Grandfather,” Mark replied. “But this is not what I’m here for.”
“No, it’s not.” Aurelius nodded.
He led them to another room, one that was sterilized and sported advanced machinery. Things that Mark had never even seen. There were screens with luminous green texts that appeared in front of it. Large panels with numerous keys, levers, and dials. Graphs of all sorts and beeping monitors. In the center, was the very thing he had come all this way to confirm. A large cylinder filled with liquid, sporting tubes and pipes connecting to its base. Inside was a woman of large proportion. Four arms, two legs, and six wings. In her bare chest was a symbol of the sun that seemed to glow dimly.
“There she is, there’s you goddess.”
Neither Mark nor his group spoke a word. He walked up to it, eyeing the woman inside. It really is her. Down to the last details. Golden hair, six limbs, six folded wings, and she looks massive. Probably as big as her statue just outside the cathedral. This is it. The very goddess in the history books, the one spoken about in legends and the one worshiped in the Churches of Sol.
“Can we free her?” he said.
The Great Grandfather nearly choked on his spit upon hearing those words. “Free her?! That could kill her! We don’t even understand this technology, let alone control it!” he said pointing at the panels. “The machines you see here are the best and most advanced we have based on what we can reverse engineer, but even then, the consequences of tampering with its functions may be disastrous!”
“I understand, Great Grandfather,” Mark said. “But we are in a dire situation, and the goddess may be our hope of turning this around. Whatever secrets of her tech that you don’t understand, wouldn’t she be able to teach us directly? What good is she floating around in Sol knows what?”
“That is her miraculous healing fluid. She had already built this contraption centuries ago in case anything were to happen to her, that her body’s natural healing could not sustain,” Aurelius said. “During the War of Darkness, Helena was struck with a weapon so deadly, her very cells began to tear away. The Reaper. Dealt to her by Absolem the progenitor. Her flesh was peeling from her body, and she began to decay whilst she still breathed. She entered this contraption and gave strict instructions to the Great Grandfather at the time, not to interrupt the healing process. The machine that monitored her, however, began to fail over time.”
“So this… these screens and panels…”
“Is only what functions we can understand. We took it upon ourselves to rebuild and study it the best we could. What we have right now is only a cheap imitation of a technology we do not fully comprehend,” he said. “It took us decades to even figure out the fundamentals and create a working prototype of this machine. By some miracle, the goddess’ healing process had remained even while we replaced components of technology ahead of ours.”
“But you know how to free her, don’t you?”
“I… yes.”
“Great Grandfather Aurelius,” Mark began. “We can end this war. Imagine what we could do with the goddess fighting on our side. We could advance even further, we could finally end the bloodshed, and we can show humanity that there is still hope. Imagine how people all over the world would feel seeing as their goddess has returned.”
“I wish I had your enthusiasm,” Aurelius said. “But it is simply too risky. The Church’s duty is to protect Helena and her legacy. We keep her alive, literally and figuratively. She nearly died the last time she was involved in a war. Would you risk losing the goddess?”
“Would you risk humanity losing?”
The Great Grandfather fell silent, looking back at Helena floating inside the tube, then to the panels that controlled it. He frowned and let out a long sigh. “The goddess said that we should not interrupt it. That it would end as soon as it was finished. Maybe we should trust her words.”
Mark shook his head. “I don’t spot a single blemish on the goddess. Not a single scratch,” he argued. “You said it yourself that the machine had begun to fail and you replaced components. How would you know that the thing that’s supposed to wake her up was not tampered with? Think about it. What you may think is a useless piece may be integral to the whole machine. Or maybe your replacements were not up to the task. Just because nothing’s happened doesn’t mean its functions have remained whole.”
“Young man, we simply cannot gamble with the goddess’ life here.”
“Have you no faith? Great Grandfather?”
Aurelius stepped back in shock. Mark’s companions looked at each other, clearly surprised as well. “Mark… I don’t think we should keep arguing with—” Olivia tried to say.
“No,” the colonel said firmly, cutting her off. “Great Grandfather Aurelius, do you think that Helena will not be able to pull through if we wake her? How long has it been? A century? How much longer will we wait? She may be immortal but humans aren’t.”
“I'm sorry, but the chances of failure are too high. The probability of her—”
“I don’t care about the probability! Would you rather put your faith in a statistic?!” Mark raised his voice. “I lost my mother to this war! My friends! My job! My eye, and almost my life! I’ve put mine on the line out there! You don’t know what it’s like out there! Was my mother’s death just a probability too? Was she just a statistic to you?! That as long as the numbers are good, no matter how many are lost, we are ‘winning’?!”
“Mark—!”
“No, Liv! He needs to know what’s really going on out there!” he spat. “Great Grandfather, with all due respect, but you don’t have a damn clue what it’s like to be in the field. You’re a man of faith, aren’t you? Take a risk. Everyone else has.”
Aurelius stood there, dumbfounded. He bit the inside of his cheeks and clenched his fists. “For your insolence, I would have had you flogged and stripped of your rank,” he glared at the young colonel. However, his features slowly softened, letting out a soft sigh. “But I have never seen such conviction. Mighty is your faith.”
The Great Grandfather moved over to the panels and reached into his robe, pulling out from around his neck a key with the symbol of the sun. He inserted it into the machine and turned. A beep sounded, right before Aurelius pulled a lever. In an instant, the fluid inside the glass chamber began to drain out into the tubes under it. Slowly, the chamber emptied and all that was left was the nude form of the goddess sitting in the glass.
“Did it work?” Louis asked, stepping forward and looking at the woman.
Aurelius stayed silent, his hands shaking in anticipation. Mark moved toward the glass chamber, when suddenly, the glass opened up like a door, releasing a fragrant mist. They stood there, watching for a whole minute. Nothing. At first nothing. The Great Grandfather looked like he was about to break down. His knees shook as he covered his mouth, thinking that he was responsible for the death of Helena.
That was when… a soft sound was heard. Movement. Olivia immediately went over to Mark and stood in front of him. Ready to protect him should anything happen. Slowly, the goddess moved more, her arms inched to the side.
Then, her eyes opened.

A number of fans of the Homeworld (HW) Universe have put a lot of thought and effort into their posts and that’s a testament to the passion that HW has brought to a lot of people.
I want to start by stating it pains me to say HW 3, especially the campaign has been a disappointment. Did we know what we were getting? Yes we had clues. Did we know the potential that HW 3 could have been based on the previous games? Oh there was immense potential!
The Homeworld series has been my favourite games (including mods) since the release of HW 1 in 1999 and I was a FIG backer for HW 3. None of the games have been perfect, but the storytelling left a long term impression and naturally the desire to want more from the series and continue to story. This has led to a loyal fan base including myself. I remember reading the HW1 manual and details about the Kushan Kiithid and the ships details numerous times.
Some of the epic storytelling events in the series that have made Homeworld what it is:
· The Kushan Kithid feuding for generations on a desert planet, Kharak, to then discover an ancient starship (Khar-Toba) buried in the desert sands. The genetic study also revealing they were not native to the planet.
· Discovering the Guide Stone in the Khar-Toba with a map pointing out Hiigara “Home”
· Discovering a Hyperspace Core and the Kiithid coming together to build the Mothership with Karan S’Jet integrated as Fleet Command
· Kharak burning – What treaty did the Kharak people break and what was their past? The war with the Taiidan Empire begins to reclaim their home.
· The Garden of Kadesh and realising they were part of the same race.
· The Bentusi and discovering why the people of Hiigara were exiled to the far reaches of the galaxy.
· Defeating the Taiidan Emperor, Riesstiu IV, and taking back Hiigara
· Learning more about the Kiithid in Cataclysm, the Beast, and the Bentusi’s fear – “We shall not be bound”
· Bentus sacrificing itself so the Hiigarans and Karan S’Jet could re-unite the 3 Hyperspace Cores
· Progenitor Relics, ships and guardians
· Balcora Gate and the battle to recovering the third Hyperspace core from Makaan (who believed he was the Sajuuk-Khar) and the Vagyr
· Transferring from the mothership to the long-lost Progenitor starship Sajuuk. Seeing the mothership drift away. It was a memorable moment .
· Saving Hiigara from the Scorched Earth scenario. The fleet fought hard to save Hiigara and their people.
· The Eye of Aaran which Sajuuk and the 3 hyperspace cores unlocking the vast hyperspace gate network. Hiigara opened up a trade/exploration/colonisation network across the galaxy and beyond. Not just for them, but for all civilisations.
Finally the day comes when the HW3 Collector’s Edition arrives after waiting years as a FIG Backer. It was amazing. The artwork was beautiful. The models were great and go well with the HW2 collector’s edition. After so many years, HW3 was finally here!
I finished the HW3 campaign a couple of nights ago. First there was anger, frustration, followed by mourning the loss of such a great opportunity that could have been for the Homeworld Universe. After playing 4 previous HW games for years, it feels like the team that wrote the HW3 script really did not understand the franchise, storyline to date, and its ‘spirit’.
After watching the promotional videos from the team from Blackbird Interactive saying HW3 was for the fans that have been with them along the 25 year journey (Relic Entertainment back then) the disappointment was very real. Sure it’s a visually beautiful game and some of the game features are an improvement which they couldn’t do in HW 1 and 2, but this did not feel like a continuation for the long term fans. This felt like a simpler HW labelled game for a new fan base. Such a missed opportunity! There has been the release of Homeworld Mobile and the VR version so Gearbox are looking to maximise the revenue while they can, and I can’t blame them for that.
My HW3 opinion:
· Aesthetically, HW3 is stunning
· I really like the look of the Khar-Kushan Mothership
· Deserts of Kharak showed the struggle and Kiithid conflict aswell as how difficult life was on a Desert Planet. HW1 was about the Kushan coming together to fight for their true home after Kharak was burned. Cataclysm did a good job expanding the different Kushan (now Hiigaran) Kiithid. HW2 felt like an “unbound” storyline with the three Hyperspace Cores – Karan got her time in the limelight – the three cores and Sajuuk combined was the key to the hyperspace network and “The Age of S’Jet”. HW3 continued with a focus on being ‘unbound’ lacking the substance behind who the Hiigarans are and their history, even before their exile…a missed opportunity.
· Popular fan request – Let us finish collecting resources! Imogen and the fleet were being hunted so I understand the urgency behind the gameplay…….but still, the player should have the option to jump when they want to.
· Besides one interceptor getting stuck on an object on mission 13, I had a pretty smooth gaming experience. The intelligence of the fleet and formations was a bit dodgy which required a lot of micro management.
· Cinematics between missions. The quality varied. Feels like more time and money was spent on the development of each one instead of a decent storyline. Why did it need to be done when you compare to the predecessor games? Likely because this game was more character focussed instead of a Fleet Focus.
· Khar-Kushan colliding with the giant freighter. That would have caused catastrophic damage and serious structural integrity issues. It seemed a bit too much! An evasive manoeuvre which led to the Synth Hyperspace Core housing being damaged as it clipped the freighter would have been enough to temporarily take out, power, propulsion and two out of the three cores.
· Ship designs were bland and generic lacking the HW2 creativity. Hiigarans have discovered quite a bit of Progenitor tech so why are they still stuck with the same types of weapons.
· No Sub Systems compared to HW2
· No targetable ship components e.g. engines, primary weapon etc. compared to HW2
· IMO the fleet ship types and options were far inferior to HW 1 & 2. It felt dumbed down significantly.
· One kind of Corvette……..really???
· Hiigaran Carrier….horrible design and couldn’t keep up with the Khar-Kushan.
· Why no Ship Yard? I can understand the Khar-Kushan had capital ship building capabilities, but it still would have added flexibility in Fleet logistics.
· Fleet control options were not great and missing a few options compared to HW 1 & 2. When you have a fast paced fleet battle going on, you want to minimise the time it takes to search for ship order functions.
· Using classic controls with terrain tunnels sucked. I struggled with the camera view because of the terrain. Too often I was met with blue screen because the camera was inside a structure or terrain.
· The antagonist – The Queen of Incarnate, Tiaa’Ma. An Unbound that has been around for millennia with far superior knowledge and use of hyperspace, can move and destroy planets on a whim, can turn off hypergates or redirect them. With that kind of power, why didn’t she hunt down the cores and search the galaxy for them? A tyrant that has killed millions. The Queen in general as the antagonist and the campaign ending was incredibly bad.
· With the 3 Hyperspace Cores gone, the 15^th fleet are not the only ones stranded. The Hyperspace gate network is down for all civilisations. Far jumping is gone. What detrimental effect will that have on the galaxy at large including the Hiigaran colonies, economy, diplomatic relations with other civilisations etc.?
· Imogen’s choice not to engage with the Incarnate after their Queen was gone was poor form!
· Imogen S’Jet – The hair…dry and wet…WTF
· I personally wanted to learn more about the Progenitor. Instead, I got hive mind Progenitor worshipers and still very little information about them or those who created the cores and the gates etc.
· Sajuuk combined with the three hyperspace cores was the key to opening the Hyperspace Gates. It was a superior ship IMO. So where is Sajuuk now? Were the 3 cores removed and put into a new mothership (Khar-Sajuuk) with the primary weapon looking like a mini Sajuuk sticking out of the centre of the ship. If it is the Sajuuk with the Mothership built around it, the scale is way off. Sajuuk was a mothership size vessel!
So after that rant, HW3 is beautiful but a hard pill to swallow after 25 years of loving the HW Universe. Life goes on! I hope the loyal fan base provides constructive feedback for BBI and Gearbox Software in hope it is listened to and used to bring back epic storytelling.

Isn’t it a pity that we cannot swap the CPU between VIC-20, C64, and C264 . I still don’t understand how Atari and Apple work, but for Vic-20 I understand the block diagram. All these computers have a lot of multiplexers. C64 was an expensive machine with quite a few ICs on the board.
So I understood that multiplexers are cheap because they have a low pin count and VIC-20 used three of them. Indeed, in the C64 I feel the need for 3 control lines to sync their m behaviour.
MOS was able to produce powerful and fast out pins, so no need for TLS chips from TI.
Custom chips could multiplex between system bus, SRAM, DRAM, VIC-II, and CPU. They would also multiplex the address for DRAM and could latch signals. So VIC could access SRAM, while the CPU could access DRAM. Interleaved access to DRAM is fast because the multiplexer interacts with DRAM and as a the last and first step internally separates the signal paths for both bus masters.
DRAM refresh is by VIC while it accesses SRAM.

Hello Guys,
I have made a list of top Hair Iron Curlers according to what Redditors like the most. I've made this this after reading a lot of discussions on different subreddits and According to my insights these are the most liked Iron Curlers by redditors:
_________________________________________________________

Top Hair Iron Curlers 2024

1. GHD Curve Creative Curl Wand
2. Beachwaver PRO Curling Iron
3. Shark HD430 FlexStyle Air Styling & Drying System
4. T3 CurlWrap 1.25″ Automatic Rotating Curling Iron
5. Bio Ionic NanoIonic MX Long Barrel Curling Iron
6. Infinty Pro by Conair Secret Automatic Curling Iron
7. Ion Golden Titanium Curling
8. Iron Dyson Airwrap

GHD Curve Creative Curl Wand:
The GHD has a unique design, with a tapered barrel that starts off round and graduates to a flat oval at the top, tapering from 1-inch to 0.9-inch. Both of these traits keep the curls from molding into a strategically tapered curl, which can sometimes look too perfect and unnatural. The slight taper and the gritty finish of the barrel keeps the hair from sliding down as it can do with a barrel that has a super-glossy finish.
_________________________________________________________
Beachwaver PRO Curling Iron:
Beachwaver Pro is an innovative professional rotating curling iron invented by celebrity hairstylist Sarah Potempa. This curling iron rotates in both directions to give you glamorous, bombshell waves with the touch of a button.
_________________________________________________________
Shark HD430 FlexStyle Air Styling & Drying System:
With the Shark Air Styling & Drying System, you can easily transform between a powerful, fast, hair dryer, and an ultra-versatile multi styler with no-heat-damage. One twist is all it takes to flex from one to the other. Attach different stylers and unlock the ability to curl, volumize, smooth, and dry. Lightweight & powerful, FlexStyle is the answer to fast, easy styling.
_________________________________________________________
T3 CurlWrap 1.25″ Automatic Rotating Curling Iron:
The T3 CurlWrap features a long, 1.25″ auto-rotating barrel and 2 SmartCurl timer settings for fast, easy, flawless curls and waves. A two-way AutoTwist switch steers effortless barrel rotation, and Digital T3 SinglePass Technology powers 9 precise heat settings for lasting curls on all hair types.
_________________________________________________________
Bio Ionic NanoIonic MX Long Barrel Curling Iron:
The Bio Ionic curling iron offers six labeled heating settings ranging from 250°F to 430°F, increasing in increments of 30°F. I chose 360°F, which the brand recommends for “normal hair.” The longer, 1.25-inch thick barrel makes it easier to curl larger sections of hair at once without forfeiting your desired style. While clamps can sometimes leave kinks in the hair that force you to redo a lock of hair, this one didn’t.
I enjoyed using this iron, but some with short or medium-length hair may find it bulky or unnecessary for achieving their desired style. On the other hand, if you have long hair that makes it difficult to get an even, tight curl from root to tip, this extra-long curling iron could be your solution.
_________________________________________________________
Infinty Pro by Conair Secret Automatic Curling Iron:
InfinitiPRO By Conair Curl Secret Auto Curler is the way to create curls that won’t quit. Select a temperature, a curl type, and a curl direction, then place a section of hair into the slot. Push START & watch hair gently wrap around the barrel.
_________________________________________________________
Ion Golden Titanium Curling:
If you’re after curls that last, you might want to give the Ion curling iron with the highest temperature a shot. It really stood out in our tests, especially for those with thick or coarse hair. People loved how it excelled in so many areas, like how easy it was to grip and maneuver, the simple controls, its compact size, and most importantly, how well it kept those curls intact.
One thing users particularly liked was that the clamp is the same length as the barrel, which is great for folks with shorter hair. And the shorter handle? Well, that keeps your hand in just the right spot to reach the thumb grip easily. Just a heads up though, the handle can get a tad warm when you crank up the heat to the max.
_________________________________________________________
Iron Dyson Airwrap:
The Airwrap is a styling tool with multiple heads and a controlled heat system. Essentially, it’s meant to be your hairdryer, straightener, and styler all in one as well as a healthier way to style your hair.
But all of this innovation comes with a sky high sticker price. If it means you’re able to swap out your hair dryer, flat iron and curling tools for one item, though, we think it’s justifiable. You can also opt for sets that target different hair types and textures, including long or short barrel sets, and attachments for kinky hair.
________________________________________________________________________________

Please no spoilers as somehow I've avoided them for this long. Questions are labeled at the bottom if you don't want to read all of it.
I recently got back into PS3 and have been picking up a bunch of games. Two important franchises to me where Metal Gear and final fantasy.
I picked up all three final fantasy XIII games on the system and I'm about 30 hours into the first one. And all the sudden the game opens up into this world I was not expecting out of it. I really love the way you can hot swap your classes mid-battle and even midcast. I also really love how you can tweak all these builds basically from interchanging what each character's class is on the paradigm system. To me this is kind of the epitome of the old turn-based combat. It's flashy and active and smooth and you don't lose any tactical system that we had previously.
I am not one to hate on the newer games as I love them too but I always miss the old turn-based combat. Really wish I would have played this back in the day but I'm glad I'm getting to now.
Question 1
I am wondering if anybody could pass along to me their favorite builds? No spoilers please. Once I've gotten to Gran pulse I've noticed a slight uptick on how long it takes me to kill some packs. I've been tweaking around with what I've used in the past and what I haven't used yet but some of these packs are perplexing me. For some of the smaller packs that I can get through I use combination of bully or Delta attack as an opener depending on the pack. I still feel like I need combat clinic for emergencies. I also like to use smart bomb when the situation calls for nuking them while weakening them. And I like to use relentless assault for finishing or if it's an easy mob just straight through.
Question 2
The other question I had is did you guys grind when you got to Gran pulse? I did the first five missions from the cieth stones or whatever and got the trophy for that which says that I completed all of the low level ones. Now I'm considering grinding out here in this massive space and just getting some levels on my paradigms roles. I'm just wondering is that smart now or should I move a little forward before doing that? I have no problem grinding in fact I love grinding so if it's okay to do it here I will but if it's smarter to wait a little bit I would do that because I also like to be efficient grinding. Which is one of my other favorite things about this game so far is that if you figure out an enemy with your paradigm system you can kill so fast and I feel like the grinding is going to be really fun once you've got the particular enemy your grinding on down.

Hi! Philosophical question here.
Say you a designer working on a B2B platform used by dentists. Your Company X platform offersdentists tools to run their businesses and do all their work, pretty much plug and play - charting, running reports, billing, etc.
The Company X platform offering has been around for awhile with no design system, just all different ad hoc UX work. But the company recently started building with new technology, and along with that has started up a new unified design system (YAY!)
The new design system foundation was created with the intention of being simple and intuitive for dentists, based on google material design, and now, module by module, new components are being stood up using the new Company X tech and new design system. It’s all going great…
Until…
You realize there are 2 other user types of the Company X platform which are different than the dentists originally considered as users of the design system: office staff and patients.
Company X offers a B2B2C patient portal (which the dentists white label as their own - so the platform and Company X brand is invisible to the patients) and there will also eventually be another offering which is a B2B medical records portal used by the office staff (on the roadmap.)
There was no research on the patients or office staff when the new design system was created for dentists, and no differentiated style or interaction designs were considered for these other users.
It’s become clear with recent new research that the user experience and needs, psychographic personas, use cases, etc. are very different for patients than dentists (shocking, I know, but 20/20 hindsight). So what is easy and intuitive for dentists might still feel overwhelming or cold and uncaring for patients with a toothache, etc.
What would go into your thinking about how to modify the new design system for the patient portal and the medical records portal? Would you consider modifying the design systems in both use cases? Or would you never make changes to the design system in order to maintain consistency across everything sold to dentists? Or would you not even reference the design system that was created for the dentist user platform and start fresh when designing for the two other users?
Note there will be no separate marketing brand for the patient portal or the medical records portal. These are just considered parts of the overall platform offering and overall brand.
I’ve been hunting for articles and references for platform design systems for similar use cases but can’t find any for the white label use case which seems the trickiest. AirBnB and Uber for example, are 2 sided platforms where the parent brand and design is known on both sides, no white label.
Thanks!!

Hellooooooo please be kind but I am a total noob to PCs. I have a parts list that I put together but I'm such a noob I had to double check that I didn't get the GPU and CPU mixed up when labeling. I have no idea what I'm doing. I've watched some videos on LTT and browsed a few subreddits (especially this one) and found a few lists that helped me put this together (below). It's already barely in my budget when I include a monitor which I've yet to pick out but that's not my focus for the post. Really I'd just like to make sure I'm making the best choices for my budget ($800~-$1000~) (surprise surprise) and goals for my build. Mainly I'll be using it for gaming and general internet browsing as well as hosting DnD online using many different applications at once (voicemod, discord, browsers, roll20, music players, etc) and might even consider streaming/recording gameplay from time to time. I'm also a musician and would like to eventually use the system for editing and production purposes as well, but that's not high on my priority list at the moment, just something I want to keep in mind when I eventually upgrade. As for games, I like to play competitively and casually both single player and multiplayer from cyberpunk and celeste to league of legends and smash bros. Oh and elden ring. I'm not sure if it's unrealistic to be able to play these sorts of games with such a low budget, but that's about what it is. Any help/advice/input/whatever is much appreciated. Thank you so much for reading! Please let me know if I didn't include anything important or if you have any questions as well!
GPU - PowerColor AMD Radeon RX 6600 Fighter Dual Fan 8GB GDDR6 PCIe 4.0
CPU - AMD Ryzen 7 5800X3D Vermeer 3.4GHz 8-Core AM4 Boxed Processor - Cooler Not Included
RAM - G.Skill Ripjaws V 16GB (2 x 8GB) DDR4-3200 PC4-25600 CL16 Dual Channel Desktop Memory Kit F4-3200C16D-16GVKB - Black
motherboard - ASUS B550-PLUS TUF Gaming WiFi II AMD AM4 ATX Motherboard
SSD - Inland TN320 1TB SSD NVMe PCIe Gen 3.0x4 M.2 2280 3D NAND TLC
Tower - Lian Li Lancool 205M Mesh Tempered Glass microATX Mid-Tower Computer Case - White
Cooler - Thermaltake Contac 9 SE 120W TDP CPU Cooler

Hellooooooo please be kind but I am a total noob to PCs. I have a parts list that I put together but I'm such a noob I had to double check that I didn't get the GPU and CPU mixed up when labeling. I have no idea what I'm doing. I've watched some videos on LTT and browsed a few subreddits (especially this one) and found a few lists that helped me put this together (below). It's already barely in my budget when I include a monitor which I've yet to pick out but that's not my focus for the post. Really I'd just like to make sure I'm making the best choices for my budget ($800~-$1000~) (surprise surprise) and goals for my build. Mainly I'll be using it for gaming and general internet browsing as well as hosting DnD online using many different applications at once (voicemod, discord, browsers, roll20, music players, etc) and might even consider streaming/recording gameplay from time to time. I'm also a musician and would like to eventually use the system for editing and production purposes as well, but that's not high on my priority list at the moment, just something I want to keep in mind when I eventually upgrade. As for games, I like to play competitively and casually both single player and multiplayer from cyberpunk and celeste to league of legends and smash bros. Oh and elden ring. I'm not sure if it's unrealistic to be able to play these sorts of games with such a low budget, but that's about what it is. Any help/advice/input/whatever is much appreciated. Thank you so much for reading! Please let me know if I didn't include anything important or if you have any questions as well!
GPU - PowerColor AMD Radeon RX 6600 Fighter Dual Fan 8GB GDDR6 PCIe 4.0
CPU - AMD Ryzen 7 5800X3D Vermeer 3.4GHz 8-Core AM4 Boxed Processor - Cooler Not Included
RAM - G.Skill Ripjaws V 16GB (2 x 8GB) DDR4-3200 PC4-25600 CL16 Dual Channel Desktop Memory Kit F4-3200C16D-16GVKB - Black
motherboard - ASUS B550-PLUS TUF Gaming WiFi II AMD AM4 ATX Motherboard
SSD - Inland TN320 1TB SSD NVMe PCIe Gen 3.0x4 M.2 2280 3D NAND TLC
Tower - Lian Li Lancool 205M Mesh Tempered Glass microATX Mid-Tower Computer Case - White
Cooler - Thermaltake Contac 9 SE 120W TDP CPU Cooler

Hi there,
So I'm graduating from my high school soon and I want to make a wiring diagram of the entire stage. This would include the server rack with a stagebox, 3 amps, network switch, patch panels and wireless mic systems. I also want to add our whole coms system and multiple access panels around the stage and in the stage.
I have attempted to use multiple different different websites for this, but none of them seams to be the right thing to use. Currently I am using draw.io but I would really want something better. I would prefer a free software but if there is some great paid options, i'd like to hear about it.

Open to offers.
PIC of items.
Nintendo 3DS PIC.
Items not listed have been sold already.
Take all for $500.
For any more photos, please ask in comments.

System	Items	Condition	Price
DS	Pokémon Diamond - Authentic	- Loose	$40
GBA	Pokémon Mystery Dungeon Red Rescue Team	- Loose	$30
GBA	LoZ A Link To The Past - Four Swords	- Loose	$40
Console	Gameboy Advance SP Model AGS - 001 w/ Charger	- New Shell - Loose	$90
Console	Gameboy Color	- New Shell - Modded IPS - Loose	$130 OBO
Console	Gameboy Pocket w/ Manual and Labels	- Loose	$90
Console	Nintendo 3DS Midnight Purple - Few Scuffs	- CIB	$160

Hi! I submitted a return request to SKIMS, and shipped my item back via the USPS office they had me select on the return. I returned it last Friday, 5/10. This evening, SKIMS emailed me saying they cancelled my return. So I found the tracking number, and on USPS' website it says Label Created, not yet in system. I brought the item to the counter and they scanned and it gave me a receipt, but of course, I literally tossed the receipt at a gas station today! I emailed SKIMS and told them I shipped the item back, and they said I need to reach out USPS to see why they cancelled it. But, SKIMS cancelled it, not USPS right? And without the receipt, I techinally don't have proof I shipped it back. I am trying to file a missing mail claim on the USPS website, but it won't let me file until tomorrow based off of the drop off date. Has anyone ever had this happen, if so, what was the outcome? I don't know what else to do and the return label doesn't even have SKIMS address on it, since it's a PARCEL RTN SVC label.

Electronic equipment repair toolkit is an indispensable assistant for every professional repairman or DIY enthusiast. A quality toolkit not only improves work efficiency, but also ensures the safety of the repair process. Today, we will introduce several Phonefix highly rated computer, electronic equipment repair toolkits.
Computer as well as Mobile device assembly and modification can extend the functionality of a computer and improve its performance, and when a computer malfunctions, it is necessary to alter the computer components. These things can cost hundreds of dollars if a professional is called in to do the work, but with a good repair kit and some care, computer cell phone den electronic device users can have the repairs done at home at a much lower price.
Below is a list of the best repair kits for computers and other mobile devices, as well as a buying guide to help you choose the best repair kit for you.

• Most Combination: Multi-function 170-in-1 Screwdriver Set
• Most Professional: Mechanic KINGKONG Mini Screwdriver Set
• Most with anti-static wrist band: 9 IN 1 Full Set Silicone Soldering Mat
• Most Essential Tool Kit: 34 In 1 Magnetic Screwdriver Set
• Most Multi-Tool: 3D Precision Screwdriver
• Most Ergonomic: Magnetizer Demagnetizer Screwdriver Tips
• Most Comprehensive: 100/139/155 in 1 Professional Electronics Tool Kit
• Most Affordable: Precision Screwdriver Set 80 In 1

1. Most Combination-Multi-function 170-in-1 Screwdriver Set
Regardless of the type of repair task for the electronic device at hand, the UnaMela Computer Toolkit is up to the task. The toolkit contains 170 different gadgets and more to match almost any small screw on your computer's emergency mobile device.
The kit comes with all the tools needed for a variety of jobs. Ideal for repairing laptops, mobile devices and other delicate items such as watches and glasses. Lightweight and compact design, made of CRV steel with a hardness of up to HRC52 56 for long-lasting use.
2. Most Professional-Mechanic KINGKONG Mini Screwdriver Set
Mechanic KINGKONG Mini Screwdriver Set Cell Phone Tablet Removal Tool with R10 Crystal Storage Case.Mechanic Screwdriver iPhone Android Repair Removal Tool. Bit model number is printed on the box to help you quickly identify the bit. The compact screwdriver set is perfect for carrying in your tool bag or pocket.
The kit is designed to meet the needs of professionals and hobbyists alike. It is coated with anti-rust oil on the surface of the bit to avoid rust, the surface of the screwdriver is sandblasted and anodized to prevent sweat and corrosion, and the grip is designed with a three-dimensional non-slip pattern for a stable grip.
3. Most with anti-static wrist band-9 IN 1 Full Set Silicone Soldering Mat
Computer or mobile device repair can be a very tedious process as the entire computer can be damaged if you are not careful. Therefore, it is important to have a repair kit that is safe to use, such as the 9 IN 1 Full Set Silicone Soldering Mat Professional Electronics Repair Kit.
The included anti-static wrist strap prevents static discharge from damaging the PC, and the kit comes with an ergonomic press-fit screwdriver handle. In addition, thanks to the high-quality construction, users can rely on their tools to last for the duration of each repair.
4. Most Essential Tool Kit-34 In 1 Magnetic Screwdriver Set
Not every user needs 100 different tools to repair a computer, which is why this CS0601A 34-Piece Electronics Repair and Unboxing Toolkit is a simple repair toolkit that focuses only on the necessary tools and avoids all the extras.
This tool kit can be used not only for computers but also for other electronic work. The kit comes with a nice carrying case, making it an ideal toolkit for professional technicians and DIYers on the go.
One reviewer confirms that "all the tools are just the right size and the included tools allow you to do a lot of different jobs". Another user commented that "the tools are sturdy and seem to be of above average quality".
5. Most Multi-Tool- 3D Precision Screwdriver
6 Hybrid Precision 3D Screwdrivers Cell Phone Repair Hand Tools, Universal Size Reliable 3D Screwdrivers Includes Phillips (1.2mm), Torx T2, Slotted (1.5mm), 5-Pin (0.8mm), Y-Three Point (0.6mm), Specified Phillips (2.5mm). Do more than just repair computers. This kit can handle PCs, laptops, gaming systems, eyeglasses, jewelry, and more.
One buyer used the kit in his work and thought "it is very convenient as it has many pointed models. The tips accommodate a variety of screw openings, which is a plus."
6. Most Ergonomic-Magnetizer Demagnetizer Screwdriver Tips
Computer repairs can take hours, so it's important to use tools that are not only comfortable, but also allow the user to maintain precision and optimal control. That's why the Magnetizer Demagnetizer Screwdriver Tips Set has a screwdriver with a non-slip grip and ergonomic design.
7. Most Comprehensive: 100/139/155 in 1 Professional Electronics Tool Kit
With a total of 135 components, this professional electronic tool kit truly has all the tools that users want or need for PC and computer repair. With a variety of the most commonly used screwdriver bits, buyers will be able to find the right screwdriver bit for any screw they come across while using the kit.
Even with so many small pieces, the kit keeps everything organized and easy to find with its labeling and two-color coding system.
One customer wrote, "This is one of the nicest precision screwdriver sets I have ever used. "

8. MOST AFFORDABLE: PRECISION SCREWDRIVER SET 80 IN 1

The Repair Tool is a great option for DIYers who want to save money. For an affordable price, users get a 56-piece tool set that's more than enough for most computer jobs.

CHOOSING THE BEST REPAIR TOOL KIT—BUYING GUIDE

Before purchasing a computer or mobile device repair kit, users should understand what a computer repair kit does and what the different tools are used for. Since almost all components in a computer are held in place by tiny screws, what these kits have in common is that they come with screwdrivers. Most tools come with a variety of different styles and sizes of magnetized screwdrivers.

OTHER FACTORS TO CONSIDER

In addition to the selection of tools in a repair tool set, users should also consider other factors to determine if the set is worth the investment. 1. Quality: The quality of the tools has a direct impact on the efficiency and safety of the repair job. High-quality tools not only last longer, but are also easier to handle, reducing the risk of equipment damage due to tool problems 2. Price: Price is also an important consideration. While high-quality tools may cost more, they may be more cost-effective in the long run due to their longer lifespan!
We hope our best computer repair toolkit reviews have been helpful. For more related products, including soldering stations, microscopes, batteries, screens, and more, check out these other guides from PHONEFIX.

Introduction to accepting credit card payments for your DJ business

Accepting credit card payments for your DJ business is an essential step in today's digital age. With the rise of online shopping and contactless payments, customers expect the convenience and security of paying with their credit cards. In this article, we will explore how you can easily accept credit card payments for your DJ business using Square, a leading payment processing platform. Whether you are a seasoned DJ or just starting out, integrating Square into your business operations will not only streamline your payment process but also enhance the overall customer experience. So let's dive in and discover the benefits of accepting credit card payments for your DJ business with Square.

Benefits of accepting credit card payments

Accepting credit card payments for your DJ business with Square offers numerous benefits. One of the key advantages is the ability to provide a convenient and secure payment option for your customers. By accepting credit cards, you can attract more customers and increase your sales, as many people prefer to pay with their cards instead of carrying cash. Additionally, accepting credit card payments can improve your cash flow by ensuring timely and reliable payments. Another benefit is the ability to track and record transactions easily, which can streamline your accounting processes. Furthermore, accepting credit cards can enhance your professional image and credibility, as it demonstrates that you are a modern and trustworthy business. Overall, integrating Square as a payment solution for your DJ business can greatly enhance your operations and customer satisfaction.

Overview of Square as a payment solution

Square is a leading payment solution that has revolutionized the way businesses accept credit card payments. With its user-friendly interface and innovative features, Square has become the go-to platform for entrepreneurs looking to transform their side hustle into a thriving business. Whether you're a DJ looking to accept payments for your services or a small business owner exploring new payment options, Square offers a seamless and secure solution. By leveraging Square's powerful tools and integrations, you can easily manage transactions, track sales, and gain valuable insights into your business. With Square, accepting credit card payments has never been easier.

Setting up a Square account

Creating a Square account

Creating a Square account is an essential step for accepting credit card payments for your DJ business. Square is a trusted and widely-used payment processing platform that provides a seamless and secure payment experience for both businesses and customers. By creating a Square account, you gain access to a range of powerful features and tools that can help streamline your payment process and enhance your overall business operations. Whether you're a seasoned DJ or just starting out, having a Square account is crucial in today's digital age where cashless transactions are becoming increasingly prevalent. With Square, you can easily accept credit card payments, track your sales, manage inventory, and even create customized invoices. Join the thousands of DJs who have already embraced Square and experience the convenience and efficiency it brings to your DJ business.

Verifying your identity

Verifying your identity is an essential step when it comes to hiring services. It ensures that the person or business you are dealing with is legitimate and trustworthy. By verifying your identity, you can provide your customers with the confidence they need to trust you with their credit card information. Square offers a seamless and secure process for verifying your identity, making it easy for you to accept credit card payments for your DJ business. With Square's robust verification system, you can rest assured that your customers' information is protected and that you are meeting the necessary requirements for accepting credit card payments.

Linking your bank account

Linking your bank account is a crucial step in accepting credit card payments for your DJ business with Square. By linking your bank account, you can securely transfer funds from your Square account to your bank account, ensuring that you have easy access to your earnings. To link your bank account, simply follow the step-by-step instructions provided by Square. Once your bank account is linked, you can start accepting credit card payments with confidence and convenience.

Choosing the right Square hardware

Understanding the different types of Square hardware

Understanding the different types of Square hardware is essential for any DJ business looking to accept credit card payments. Square offers a range of hardware options that cater to different business needs. Whether you're a mobile DJ or have a physical storefront, Square has the right solution for you. By choosing the right Square hardware, you can ensure a seamless payment experience for your customers and a stronger future for your DJ business.

Selecting the hardware that suits your DJ business needs

Selecting the hardware that suits your DJ business needs can be a crucial decision. It is important to consider factors such as functionality, compatibility, and reliability when choosing the right equipment. Self love for entrepreneurs is also a key aspect to keep in mind, as investing in high-quality hardware can enhance your performance and productivity. Square offers a wide range of hardware options that cater to the specific requirements of DJ businesses. Whether you need a robust card reader, a sleek and portable point-of-sale system, or a reliable receipt printer, Square has got you covered. With their user-friendly interface and seamless integration with their payment processing system, Square's hardware solutions can streamline your payment acceptance process and provide a professional experience for your clients. By selecting the right hardware for your DJ business, you can ensure smooth transactions, efficient operations, and ultimately, the success of your business.

Setting up and configuring your Square hardware

Setting up and configuring your Square hardware is an essential step in accepting credit card payments for your DJ business. By following the proper procedures, you can ensure a seamless and secure payment process for your customers. Begin by unboxing your Square hardware and carefully reading the setup instructions provided. Connect the hardware to your device using the appropriate cables and adapters. Once connected, proceed to the Square app and follow the on-screen prompts to complete the configuration process. It is important to double-check all settings and ensure that the hardware is properly calibrated for accurate payment processing. By taking the time to set up and configure your Square hardware correctly, you can provide a professional and reliable payment experience for your clients.

Integrating Square with your DJ software

Exploring DJ software compatibility with Square

When it comes to accepting credit card payments for your DJ business, it is important to explore DJ software compatibility with Square. Square is a leading payment processing platform that offers a secure and convenient way to accept payments. By integrating Square with your DJ software, you can streamline your payment process and ensure a seamless experience for your clients. With Square, you can securely process credit card payments and provide your customers with peace of mind. Don't miss out on this opportunity to secure your spot in the competitive DJ industry.

Configuring Square integration settings

Configuring Square integration settings is a crucial step in accepting credit card payments for your DJ business. By seamlessly integrating Square into your payment system, you can provide your customers with a secure and convenient way to pay for your services. To ensure a smooth integration process, here are some pet product validation tips to consider. First, validate the pet product's quality and safety standards to ensure it meets industry regulations. Second, verify the accuracy of the product's labeling and packaging information, including ingredients, usage instructions, and any applicable warnings. Third, conduct thorough testing to confirm the product's effectiveness and durability. By following these tips, you can confidently configure Square integration settings and offer your customers a reliable and trustworthy payment experience for your DJ business.

Testing the payment process with your DJ software

To ensure a smooth and seamless payment process for your DJ business, it is crucial to thoroughly test the payment process with your DJ software. This step is essential in order to identify any potential issues or glitches that may arise during actual transactions. By conducting thorough testing, you can ensure that your customers will have a hassle-free experience when making credit card payments. It is recommended to simulate different scenarios, such as accepting payments with different card types and from various payment gateways, to ensure compatibility and reliability. Additionally, testing the payment process will allow you to familiarize yourself with the software's features and functionalities, enabling you to provide better support and assistance to your customers. Overall, taking the time to test the payment process with your DJ software will help you provide a professional and reliable payment experience for your clients.

Accepting credit card payments at events

Preparing your DJ setup for accepting credit card payments

To prepare your DJ setup for accepting credit card payments, there are a few important steps you need to take. First, you will need to sign up for a Square account, which is a secure and reliable payment processing platform. Once you have created your account, you will need to connect a Square card reader to your DJ equipment. This will allow you to accept credit card payments directly from your clients. Additionally, you should ensure that your DJ software is compatible with Square, as this will streamline the payment process. Finally, it is important to communicate to your clients that you now accept credit card payments, as this will give them the convenience and flexibility they need. By following these steps, you can easily integrate credit card payments into your DJ business and provide a seamless experience for your clients.

Educating your clients about the payment options

Educating your clients about the payment options is crucial for the success of your DJ business. By providing clear and comprehensive information about how to accept credit card payments with Square, you can ensure that your clients feel confident and comfortable when making transactions. With Square's secure and reliable payment processing system, you can offer your clients a convenient and hassle-free way to pay for your services. By explaining the benefits and ease of using Square, you can demonstrate your professionalism and dedication to providing a seamless payment experience. Additionally, educating your clients about the various payment options available, such as contactless payments and online invoicing, can help them choose the method that suits them best. By taking the time to educate your clients about the payment options, you can build trust, enhance customer satisfaction, and ultimately grow your DJ business.

Ensuring a smooth payment process during events

Ensuring a smooth payment process during events is crucial for any DJ business. With Square, you can easily accept credit card payments, providing a convenient and secure payment option for your clients. Square offers a user-friendly interface, allowing you to quickly process transactions and provide receipts to your customers. By using Square, you can eliminate the hassle of handling cash and ensure a seamless payment experience for both you and your clients. Accepting credit card payments with Square is a reliable and efficient solution for your DJ business.

Managing transactions and finances

Tracking and reconciling transactions in your Square account

Tracking and reconciling transactions in your Square account is an essential aspect of managing your DJ business. By accurately tracking your transactions, you can ensure that all payments are properly recorded and accounted for. Square provides a user-friendly interface that allows you to easily view and reconcile your transactions. With Square's advanced reporting features, you can generate detailed reports to analyze your sales and identify any discrepancies. Additionally, Square offers seamless integration with popular accounting software, making it even easier to track and reconcile your transactions. Whether you're a beginner or an experienced DJ, having a reliable system for tracking and reconciling transactions is crucial for the success of your business.

Generating financial reports for your DJ business

Generating financial reports for your DJ business is crucial for understanding the financial health of your business and making informed decisions. With the right financial reports, you can track your income, expenses, and profit margins, allowing you to identify areas for improvement and optimize your business operations. One important aspect of financial reporting is search engine optimization (SEO), which plays a vital role in driving organic traffic to your website and increasing your online visibility. By implementing effective SEO strategies, such as keyword research, on-page optimization, and link building, you can improve your website's ranking on search engine results pages and attract more potential clients. Additionally, monitoring and analyzing SEO metrics, such as website traffic, keyword rankings, and conversion rates, can provide valuable insights into the effectiveness of your SEO efforts. To ensure the success of your DJ business, it is essential to prioritize search engine optimization and regularly generate financial reports to monitor and optimize your business's performance.

Managing refunds and chargebacks

Managing refunds and chargebacks is an important aspect of accepting credit card payments for your DJ business with Square. When customers request a refund or initiate a chargeback, it is crucial to handle these situations professionally and efficiently. Square provides a user-friendly interface that allows you to easily manage refunds and respond to chargebacks. By promptly addressing customer concerns and following Square's guidelines, you can maintain a positive reputation and ensure customer satisfaction in your DJ business.

Conclusion

Summary of the benefits of accepting credit card payments with Square

Accepting credit card payments with Square offers several benefits for your DJ business. First, Square provides a secure and reliable payment processing solution, giving your customers peace of mind when making transactions. Second, Square offers competitive pricing with transparent fees, allowing you to easily understand and manage your payment processing costs. Third, Square provides a user-friendly interface and intuitive tools, making it easy for you to accept credit card payments and manage your business. Finally, Square offers seamless integration with other business tools and platforms, such as accounting software and customer relationship management systems, streamlining your operations and saving you time. By accepting credit card payments with Square, you can enhance your DJ business by providing a convenient and professional payment experience for your customers.

Tips for maximizing your DJ business revenue with Square

As a DJ business owner, maximizing your revenue is crucial for success. By utilizing Square, you can easily accept credit card payments, providing a convenient and secure payment option for your clients. Here are some tips to help you maximize your DJ business revenue with Square. First, ensure that you have a professional and user-friendly website where potential clients can easily find information about your services. Second, take advantage of Square's online invoicing feature, which allows you to send professional invoices to clients and track payments. Third, consider offering additional services such as event planning or equipment rental to increase your revenue streams. Finally, make use of Square's reporting and analytics tools to gain insights into your business performance and identify areas for improvement. With Square, accepting credit card payments has never been easier, helping you streamline your DJ business and increase your revenue potential.

Final thoughts on using Square for credit card payments

In conclusion, Square is an excellent solution for accepting credit card payments for your DJ business. With its user-friendly interface, secure payment processing, and competitive pricing, Square makes it easy for DJs to streamline their payment processes and provide a convenient experience for their clients. Additionally, Square offers a range of features and tools that can help DJs manage their finances, track sales, and analyze customer data. Whether you're a seasoned DJ or just starting out, Square is a reliable and efficient choice for accepting credit card payments and growing your business.
In conclusion, Square Instant Access is the perfect solution for small businesses looking for quick and easy access to funds. With Square's innovative platform, you no longer have to struggle to get the financial support you need to grow your business. Whether you need funds for inventory, marketing, or expanding your operations, Square Instant Access has got you covered. Say goodbye to long waiting times and complicated loan applications. With just a few clicks, you can have instant access to the funds you need. Don't miss out on this opportunity to take your business to the next level. Visit our website today and discover how Square Instant Access can help you achieve your goals.