Ok I just want to make sure I'm not being an idiot here, but I bought the complete edition while it was on sale, and apparently to activate that I need to put in a registration code on mogstation. Problem is, I can't get into mogstation without a one time password. Apparently you can set these up using software authenticators, which you... need a one time password to set up? Am I missing something or can I just not access mogstation, so I can't upgrade my game?
Edit: I've never set up any one time passwords on this account before. It's a new account and I played on the free trial on the account for maybe 10 or so hours. I can't leave it blank on mogstation login or on SE account management login, both say they are invalid.

A long promised "inevitable" and cute little shorty all in one. Certainly the brest choice for the BC crew this June. We're digging into Martin Brest! As always, please consult your local library if any of these are not available to you naturally, all these movies are in print and circulation on physical media. Blu Rays abound, with the exception of the start and the end: Going in Style and Gigli are both only available in the US on DVD. And a special note that the Patreon bonus on his first two student films, the short "Hot Dogs for Gauguin" and the longer Hot Tomorrows do not have official releases out there but are available in some of the more familiar archival corners of the internet at times.
Going in Style: Streaming on Watch TCM app (with cable login) through June 7th. Purchase and rental in the usual places.
Beverly Hills Cop: Streaming on Netflix and Paramount+. Purchase and rental in the usual places.
Midnight Run: Streaming on Prime. Purchase and rental in the usual places.
Scent of a Woman: Purchase and rental in the usual places.
Meet Joe Black: Free (with ads) on TubiTV. Purchase and rental in the usual places.
Gigli: Streaming on Prime. Purchase and rental in the usual places.

TL;DR Vercel is awesome but cold starts have me skeptical for longterm. Heroku seems a great alternative (and cheaper), but if you can't keep it under 512RAM (in my case), you only solved one problem and created another. Should I just go VPS? concerned code below.
I utilized the Google Ads Api and created a Google Shopping App that incorporates all of Google's RMF: Required Minimum Functionality For a Standard Shopping tool. The plan was to just create an app that follows a marketing strategy (just to create structured campaigns) I've been using for while and make it available to other people in ecommerce. By time I was finished and ready to submit, I realized there was a lot more I had to add in order to get approved. Makes sense though because they don't want you to just offer creation functionality, but not editing or removal.
The app itself is roughly 17k lines. 219 files.
Database: MongoDb to store encrypted tokens.
Billing: Stripe
Main resource: Google Ads Api & Google Content for Shopping Api
Authentication: next-auth (Google provider)
Tried Vercel Hobby to start:
I was getting function execution timeouts right out the bat. No chance this would work it seemed. Upgraded to pro...
Vercel Pro $20 p/m:
This works and with some configuration, I was able to have the app fully functional. Most times, it is so fast and I love it, but the cold starts are unpredictable and aren't ideal for many reasons. Still, I submitted the app to google to have my requested access granted and app approved for production and all went well! Given I was able to get the app approved with Vercel, I want to make it work. I tried experimental:

//next.config.js experimental: { bundlePagesExternals: true, }, 

Set my memory to 3009mb and extended my maxDuration to 30 secs in vercel.json. Implemented lazy loading for some of the larger components that are required by RMF but not likely the reason you would use the app.
Still, it seemed this would be the norm... Are things suppose to improve once you get regular traffic? Is it unique to each user or the app itself? I haven't canceled my account yet, but I did remove my domain because I figured I should give Heroku a shot.
Heroku $7 per month - Basic
I saw a post talking about Heroku as an alternative to Vercel, and I already use Heroku (node.js/Express backend) + Firebase (React frontend) for another project. Never had an issue, but I was skeptical about a Next.js app due to the monolithic structure and some of the complex processes this app performs.
The biggest shortcoming for me is the hard 512mb RAM limit. I don't have anymore cold starts, but when I initially started the app up I was hitting memory exceeded (R14) in my logs. On the very first start I also experienced an execution timeout (sigh...). I have been trying to reproduce this error since to see if it will be a common occurrence but, so far It hasn't shown itself again...
Aside from that, It's great, but not without it's own shortcomings (in my case RAM). Even upgrading to Standard would still leave me with the same amount. At that point, It becomes questionable if it's a better solution than Vercel. If I want 1GB of RAM from heroku, I'm looking at $50 minimum p/m?
Context to possible issue:
I believe the issue lies in how I authenticate users and immediately send the first Get request after successful authentication.
NextAuth Callback:
Check if user has account already

let googleUser; try { //check if we have a user under the google email for ads account googleUser = await GoogleAdsAuth.findOne({ email: user?.email }); } catch (err) { console.log( "There was an error with the code - Check GoogleAdsAuth Model also.", err ); } //add existing account id to token - regardless of access & refresh tokens if (googleUser) { token._id = googleUser._id; token.theme = googleUser.theme; token.planExpiryDate = googleUser.planExpiryDate; token.planType = googleUser.planType; token.cleanUpService = googleUser.cleanUpService; token.accountActive = googleUser.accountActive; if (googleUser.googleAccountId && googleUser.googleAccountId !== "") { token.googleAccountId = decryptData(googleUser.googleAccountId); } else { token.googleAccountId = googleUser.googleAccountId; } } 

Check if Google sent an access and/or refresh token:

//check if we have an access token after login with google if (account?.access_token && account?.provider === "google") { //encrypt access token let encryptedAccessToken = encryptData(account?.access_token); //Check if refresh token is available let encryptedRefreshToken = account?.refresh_token ? encryptData(account?.refresh_token) : undefined; //check if user exists, if they do, update the properties for access and refresh tokens if (googleUser) { let googleData: { [key: string]: string } = {}; //update access token with new encrypted access token googleData.access_token = encryptedAccessToken; //if a refresh token is in the response update this too if (account?.refresh_token) { googleData.refresh_token = encryptData(account?.refresh_token); } try { await GoogleAdsAuth.findByIdAndUpdate(googleUser?._id, googleData); token.theme = googleUser?.theme; } catch (err) { console.log("Error updating Tokens for user", err); } } 

If they don't exist create a new account for them.

else if (account?.refresh_token && !googleUser) { //create a new user for that user const startDate = new Date(); const freeTrial = 7 * 24 * 60 * 60 * 1000; const endDate = new Date(startDate.getTime() + freeTrial); const googleAuthUser = { startPlan: startDate, planExpiryDate: endDate, accountActive: true, planType: "free", email: user?.email, name: user?.name, access_token: encryptedAccessToken, refresh_token: encryptedRefreshToken, cleanUpService: true, createdCampaigns: 0, campaignQuota: 1, totalCreatedCampaigns: 0, stripeCustomerId: "", theme: "light", googleAccountId: "", selectedClientId: "", } as GoogleAuth; const newGoogleAuth = new GoogleAdsAuth(googleAuthUser); try { await newGoogleAuth.save(); //set token id to new user id token._id = newGoogleAuth._id; token.theme = newGoogleAuth.theme; token.googleAccountId = newGoogleAuth.googleAccountId; } catch (err) { console.log("Error adding GoogleAuth Details to DB", err); } 

then...
after this I send them to the app dashboard where a GET request is made immediately after to retrieve all the Shopping performance data. I've cleared my cache, revoked app permisions and deleted my user in the on Mongodb to start the process over again, to see If I can repeat the error, but can't atm.
Anyway, If you read this all, thank you. Am I wrong to immediately send additional requests to Google immediately after authentication? Median Latency for Google Api calls are 625ms and 95% latency is 1200ms.
In case your interested, here is the request I make after successful authentication - /api/...

export default async function (req: NextApiRequest, res: NextApiResponse) { const { id, segment } = req.query; // mongoDb Id an date segment (i.e. 'LAST_7_DAYS') await dbConnect(); let googleUser = await findGoogleAuthById(id as string, res); const decryptedRefreshToken = decryptData(googleUser.refresh_token); const decryptedAccountId = decryptData(googleUser.googleAccountId); const client = getClient(); const customer = client.Customer({ customer_id: decryptedAccountId, //google.googleAccountId could go here refresh_token: decryptedRefreshToken, }); //Query using GAQL const query = getAppAnalyticsQuery(segment as string); let result; try { result = await customer.query(query); res.status(200).json({ analytics: result }); } catch (err) { console.log(err); if (err instanceof errors.GoogleAdsFailure) { googleError(err); //log the Google errors } return res.status(500).json({message: 'unable to retrieve shopping performance data' }); } } 

Sorry If I didn't explain this well. Between weighing up the options to take a 3rd shot at another hosting service or question whether I can better optimize my code to work within Heroku's RAM limits. I definitely would appreciate some feedback or advice. My gut is telling me to go VPS, but I wonder If i may be ignoring a bigger issue at hand. I know my next-auth implementation part could be better optimized and the amount of comments might just piss some of you off (bare with me, it was a pain to set up). I am definitely working on improving it now. Just took time to post this hoping to get additional feedback.
In hindsight, I wish I had structured the app to host have the frontend and backend hosted separately. Oh well, I think I can make this work, but want to be considerate my next steps.

1. Accessories similar to the ones in OJ2 and connections get added. Some examples are Eri and a all Mighty figure. These won’t have a hit box no matter how large so you won’t take damage if the enemy player hits the accessory and not you
   
2. When close enough to someone who uses a skill set (example: Striker Deku) the role will appear over their head. (Won’t appear when to far or if the enemy is crouching) this is to better separate them in battle
   
3. Bring back premium login
   
4. Get 5 roll tickets at lvl 51 on the License instead of a couple of gold
   
5. Have every agency have a “Home room” in which players can go into to interact and emote with other players. The agency leader can customize the home room so it can look differently. Some examples are Nighteye’s agency and The one for all Vestiges “place”
   
6. Have 2 new game modes. The first being squads and second being a 50v50 mode. (You instantly respawn where you want to and keep your levels)
   
7. Nerf toga and her “Mirio exploit”
   
8. Fix the infinite card exploit
   
9. Two new maps gets added which is the Ground gamma and the “U.A Island (destroyed)” (where the dark hero arc take place)
   
10. Add two characters every season. The first character is free and the second as available through Gatcha. For example: if Overhaul and Donald Duck gets added in season 6, Overhaul is free and Donald Duck is gatcha
    
11. Add more npcs like Kota, but they drop cards instead of lvl up potions and have different voice lines depending on who your character is. But instead of saving them, you just talk to them. And they will have a yellow outline so differ them from actual players. A example is Gran Torino and talking to him will play a short dialogue before dropping 3 Rapid cards (A, B, and Y)
    

Did I cook?

🎉 Unlock Exclusive CS:GO Skins with GCskins! 🎮
Looking to enhance your CS:GO gaming experience? Look no further! Introducing GCskins, your ultimate destination for premium Counter-Strike skins, all for FREE!
✨ Why Choose GCskins?
Safe & Secure: No Steam login required! Enjoy peace of mind knowing your account is always protected.
Free Rewards: Earn skins effortlessly by completing simple tasks, surveys, and even playing games.
Endless Variety: Explore a vast collection of skins to customize your gaming arsenal like never before.
🔥 Claim Your Free Coins! 🔥
Use referral code "6FP76qYe" to instantly receive 20 coins! Simply enter the code when prompted and watch your rewards grow.
📱 Download Now!
Get started today by downloading GCskins from the Google Play Store: https://play.google.com/store/apps/details?id=com.gocases
🌐 Visit Our Website!
For more information and updates, visit our website: https://gcskins.gg/
Don't miss out on this incredible opportunity to level up your CS:GO experience with GCskins. Download now and start unlocking your dream skins today!
https://reddit.com/link/1d60vbd/video/3ms7orajx14d1/player
Download (https://play.google.com/store/apps/details?id=com.gocases) Download (https://play.google.com/store/apps/details?id=com.gocases) Download (https://play.google.com/store/apps/details?id=com.gocases) Download GCskins.gg (https://gcskins.gg/) GCskins.gg (https://gcskins.gg/) GCskins.gg (https://gcskins.gg/) GCskins.gg (https://gcskins.gg/)
Referral Code: 6FP76qYe 6FP76qYe 6FP76qYe 6FP76qYe

Hey folks! TL;DR on the bottom.
I recently join ADT (Plus) after transitioning from the Google Nest Secure ecosystem. I got a self setup set/box (with a control panel, motion detector and door sensor), and created an ADT account, and then I guess ADT Plus account? Not entirely sure why I need to create two accounts. I used a Gmail account that was associated with the Google Nest Secure account (to get the one year free monitoring services), so I'm not sure if I can use a different email.
For life reasons, I didn't install the equipment right away and didn't go thorough with setting up everything on the app. The app worked fine then. I tried installing everything today, and the app asked me to login, which worked, and then asked me to validate or create an account. I used my full name and email (same one as the one I logged in with), but then told me the email already exists. My only option is to "create an account," and I can't return to a previous step or move forward. I tried clear cache, data, uninstall and reinstall, restarting the device (I was getting desperate lol) and still got the same error message. I decided to try and log into the account on my mobile browser and/or the desktop browser.
However, when I try to log into my account on Chrome mobile and desktop, I can login to the "initial"/first account, and then asked to validate my account/email. When I put in the email address I used for both accounts, it says it can't find my email 🤦 What? First it says the email is already registered, then it says it can't find my email. I decided to call - tech support/customer service had me do all of the steps I described, and it didn't work. Then they had to escalate it, and I'm not sure when I'll hear back ("several business days" was what they said), so I don't have much to do but wait, but I'm wondering if something like this happened to anyone else and if it did, how did you solve it? Any help would be appreciated!
TL;DR - trying to install self setup kit, app asks me to create an account (already did), it says that the email is already registered, but when asked to validate my email on the ADT+ website, it says that it can't find my email. Customer service/tech support couldn't solve it, wondering if anyone had it happen to them and how they solved it. Thank you!

Your Mac is your digital companion, and seeing it malfunction can be a major source of stress. But before you sprint to the nearest repair shop, consider this: many common Mac issues can be tackled with a little DIY magic! Here's a breakdown of some frequent problems you might be able to solve yourself:

1. Sluggish Performance:

Over time, your Mac can accumulate temporary files and cluttered storage, leading to sluggishness. The good news is, a simple cleanup can breathe new life into your device. Use tools like "Disk Utility" to free up storage space and utilize "Activity Monitor" to identify and close resource-hogging processes.

1. Software Glitches and Application Crashes:

Sometimes, a simple software hiccup can cause unexpected behavior. Try restarting your Mac – it's a classic for a reason! If the problem persists, consider reinstalling the affected application. Most applications offer built-in uninstallers, and the Mac App Store makes reinstallation a breeze.

1. Outdated Software:

Outdated software is like wearing clothes riddled with holes – it might look familiar, but it leaves you exposed. Luckily, keeping your Mac's software up-to-date is easy. Head over to "System Preferences" and navigate to "Software Update." Install any available updates for macOS and your applications to ensure smooth operation.

1. Erratic Wi-Fi Connection:

A frustratingly common issue – the unreliable Wi-Fi connection. Before blaming your internet provider, try some troubleshooting steps. Start by restarting your router and modem. Next, forget the Wi-Fi network on your Mac and reconnect. If these steps don't resolve the issue, explore your Mac's network settings – you might need to adjust network preferences or renew your DHCP lease.

1. Slow Startup Times:

A slow startup can significantly impact your productivity. The culprit could be a program automatically launching at login. Head over to "System Preferences" and navigate to "Users & Groups." Select your user account and then click on "Login Items." Here, you can disable any programs you don't need to launch automatically at startup.
Remember, these are just a few common issues. For more complex problems or if you're unsure about DIY repairs, seeking professional help is always recommended. When it comes to Apple Mac repairs in Melbourne, there are numerous qualified and reliable specialists available who can diagnose and fix any issue your Mac might throw your way.

I have a Samsung A50 that I purchased unlocked on Amazon in 2020. At the time, I had Tracfone send me a SIM card. I haven't had any issues until this week. when I was unable to send or receive calls.
Here's what I've done so far:

1. Chatted with tech support via Tracfone.com. I was told my phone is not compatible for a new SIM card. Agent escalated the issue and scheduled a call back.
2. Call back manager was very nice and said my phone IS compatible and that I need to go buy a new Verizon SIM card and gave me a phone number to call when I had the new SIM card.
3. I bought the new SIM card at Kroger. They had two different backs on the packages - One package said copyright 2022 and one said 2024, so I bought the 2024. The new card came with two cards.
4. I called back to Tracfone. I tried both SIM cards per agent but neither worked with my phone making/receiving calls. And while the new SIM cards were in my phone, my phone was totally bugging out - keyboard wasn't working, I couldn't login. DND would randomly turn on instead of wifi/cell data, etc. It was really odd. Agent had me put my original SIM card in and once the phone was restarted, the bugginess stopped (still no working calls though).
5. Agent said let the phone rest and they'd call back in 25 minutes.
6. I jumped on Reddit and found a two year old post about the same no calls issue. That post said to turn ON VoLTE calls (never messed with that previously) and now my phone is making/getting calls again. Whew.

But now I'm wondering what SIM card I actually have? Am I going to have a non-working phone at some point? If it's an AT&T SIM, then I have to replace it at some point, but that obviously didn't work today. Anyone had any luck making that work on a 4+ year old phone?
When I go to Tracfone's website and I'm logged in, it gives me a popup to get a free SIM card for Verizon. Should I do that? Is that going to be any different than the ones I just bought from Kroger?

I have the 4070 TiS installed on a Z790 PG Sonic MB.
When I installed the 4070 in the primary PCIe lane (gen 5 x16) the PC would crash on login to Windows every time. It would boot to the login screen and could sit there indefinitely with no problems but as soon as I login it black screen restarted.
After pulling my hair out from trying to figure out what was wrong I eventually moved the GPU to the secondary PCIe slot 4 x16.
When I did that the PC became stable. I settled for that miracle and have been using it like that for about 2 months give or take.
Now I'm trying to run unreal engine 5 and every time I open it I get a crash report stating "GPU Crashed or D3D Device Removed. Check Log for GPU state information. A GPU mini dump was be saved in the Logs folder."
Yes it says "was be saved" which, while funny I'm getting tired of seeing. On the bright side while I don't know much about this personally I was able to find the log or in this case logs folder and found several files.
What they are talking about seems to be my system specs and what failed. It looks like VtuneApi.dll and it's 32 bit counterpart. It says they don't exist.
I'll be adding the log file to this post when I switch to PC.
This isn't the only thing the system has been failing to run and it's not the only problem I've noticed.
I also see what I would describe as artifacting in the display. For a few seconds when things open or are closed I'll see pixels not being rendered and in some cases they jump around so it'll look like speckles being randomly placed on the screen for a moment.
When I received my 4070 and tried to install it originally I believed it to be defective so I returned the first one.
I don't know the odds of getting two defective in a row but honestly I suspect the MB just as much as the GPU at this point.
Please help!
Thanks in advance.
**Edit to include crash log from unreal engine. Log Below.
Log file open, 06/01/24 18:23:48 LogWindows: Failed to load 'aqProf.dll' (GetLastError=126) LogWindows: File 'aqProf.dll' does not exist LogProfilingDebugging: Loading WinPixEventRuntime.dll for PIX profiling (from ../../../Engine/Binaries/ThirdParty/Windows/WinPixEventRuntime/x64). LogWindows: Failed to load 'VtuneApi.dll' (GetLastError=126) LogWindows: File 'VtuneApi.dll' does not exist LogWindows: Failed to load 'VtuneApi32e.dll' (GetLastError=126) LogWindows: File 'VtuneApi32e.dll' does not exist LogWindows: Enabling Tpause support LogICUInternationalization: ICU TimeZone Detection - Raw Offset: -5:00, Platform Override: '' LogInit: Session CrashGUID >==================================================== Session CrashGUID > UECC-Windows-E0ED82AE4064D6F6536E1DAA1672EFB5 Session CrashGUID >==================================================== LogConfig: No local boot hotfix file found at: [../../../Engine/Programs/LiveCodingConsole/Saved/PersistentDownloadDiHotfixForNextBoot.txt] LogInit: ExecutableName: LiveCodingConsole.exe LogInit: Build: ++UE5+Release-5.4-CL-33305029 LogInit: Platform=WindowsEditor LogInit: MachineId=9c24159548d0b21aadad11809f2dd72a LogInit: DeviceId= LogInit: Engine Version: 5.4.1-33305029+++UE5+Release-5.4 LogInit: Compatible Engine Version: 5.4.0-33043543+++UE5+Release-5.4 LogInit: Net CL: 33043543 LogInit: OS: Windows 11 (23H2) [10.0.22631.3593] (), CPU: 13th Gen Intel(R) Core(TM) i5-13600K, GPU: NVIDIA GeForce RTX 4070 Ti SUPER LogInit: Compiled (64-bit): Apr 30 2024 04:42:19 LogInit: Architecture: x64 LogInit: Compiled with Visual C++: 19.38.33130.00 LogInit: Build Configuration: Development LogInit: Branch Name: ++UE5+Release-5.4 LogInit: Command Line: -Group=UE_MyProject_0x8580acfa -Hidden -ProjectName="MyProject" LogInit: Base Directory: C:/Unreal Engine/UE_5.4/Engine/Binaries/Win64/ LogInit: Allocator: Mimalloc LogInit: Installed Engine Build: 1 LogInit: This binary is optimized with LTO: no, PGO: no, instrumented for PGO data collection: no LogDevObjectVersion: Number of dev versions registered: 36 LogDevObjectVersion: Dev-Blueprints (B0D832E4-1F89-4F0D-ACCF-7EB736FD4AA2): 10 LogDevObjectVersion: Dev-Build (E1C64328-A22C-4D53-A36C-8E866417BD8C): 0 LogDevObjectVersion: Dev-Core (375EC13C-06E4-48FB-B500-84F0262A717E): 4 LogDevObjectVersion: Dev-Editor (E4B068ED-F494-42E9-A231-DA0B2E46BB41): 40 LogDevObjectVersion: Dev-Framework (CFFC743F-43B0-4480-9391-14DF171D2073): 37 LogDevObjectVersion: Dev-Mobile (B02B49B5-BB20-44E9-A304-32B752E40360): 3 LogDevObjectVersion: Dev-Networking (A4E4105C-59A1-49B5-A7C5-40C4547EDFEE): 0 LogDevObjectVersion: Dev-Online (39C831C9-5AE6-47DC-9A44-9C173E1C8E7C): 0 LogDevObjectVersion: Dev-Physics (78F01B33-EBEA-4F98-B9B4-84EACCB95AA2): 20 LogDevObjectVersion: Dev-Platform (6631380F-2D4D-43E0-8009-CF276956A95A): 0 LogDevObjectVersion: Dev-Rendering (12F88B9F-8875-4AFC-A67C-D90C383ABD29): 48 LogDevObjectVersion: Dev-Sequencer (7B5AE74C-D270-4C10-A958-57980B212A5A): 13 LogDevObjectVersion: Dev-VR (D7296918-1DD6-4BDD-9DE2-64A83CC13884): 3 LogDevObjectVersion: Dev-LoadTimes (C2A15278-BFE7-4AFE-6C17-90FF531DF755): 1 LogDevObjectVersion: Private-Geometry (6EACA3D4-40EC-4CC1-B786-8BED09428FC5): 3 LogDevObjectVersion: Dev-AnimPhys (29E575DD-E0A3-4627-9D10-D276232CDCEA): 17 LogDevObjectVersion: Dev-Anim (AF43A65D-7FD3-4947-9873-3E8ED9C1BB05): 15 LogDevObjectVersion: Dev-ReflectionCapture (6B266CEC-1EC7-4B8F-A30B-E4D90942FC07): 1 LogDevObjectVersion: Dev-Automation (0DF73D61-A23F-47EA-B727-89E90C41499A): 1 LogDevObjectVersion: FortniteMain (601D1886-AC64-4F84-AA16-D3DE0DEAC7D6): 134 LogDevObjectVersion: FortniteValkyrie (8DBC2C5B-54A7-43E0-A768-FCBB7DA29060): 8 LogDevObjectVersion: FortniteSeason (5B4C06B7-2463-4AF8-805B-BF70CDF5D0DD): 12 LogDevObjectVersion: FortniteRelease (E7086368-6B23-4C58-8439-1B7016265E91): 13 LogDevObjectVersion: Dev-Enterprise (9DFFBCD6-494F-0158-E221-12823C92A888): 10 LogDevObjectVersion: Dev-Niagara (F2AED0AC-9AFE-416F-8664-AA7FFA26D6FC): 1 LogDevObjectVersion: Dev-Destruction (174F1F0B-B4C6-45A5-B13F-2EE8D0FB917D): 10 LogDevObjectVersion: Dev-Physics-Ext (35F94A83-E258-406C-A318-09F59610247C): 41 LogDevObjectVersion: Dev-PhysicsMaterial-Chaos (B68FC16E-8B1B-42E2-B453-215C058844FE): 1 LogDevObjectVersion: Dev-CineCamera (B2E18506-4273-CFC2-A54E-F4BB758BBA07): 1 LogDevObjectVersion: Dev-VirtualProduction (64F58936-FD1B-42BA-BA96-7289D5D0FA4E): 1 LogDevObjectVersion: UE5-Main (697DD581-E64F-41AB-AA4A-51ECBEB7B628): 119 LogDevObjectVersion: UE5-Release (D89B5E42-24BD-4D46-8412-ACA8DF641779): 51 LogDevObjectVersion: UE5-PrivateFrosty (59DA5D52-1232-4948-B878-597870B8E98B): 8 LogDevObjectVersion: UE5-Dev-Cooker (26075A32-730F-4708-88E9-8C32F1599D05): 0 LogDevObjectVersion: Dev-MediaFramework (6F0ED827-A609-4895-9C91-998D90180EA4): 2 LogDevObjectVersion: UE5-Dev-LWCRendering (30D58BE3-95EA-4282-A6E3-B159D8EBB06A): 1 LogInit: Presizing for max 100000 objects, including 0 objects not considered by GC, pre-allocating 0 bytes for permanent pool. LogInit: Object subsystem initialized LogConfig: Applying CVar settings from Section [Startup] File [../../../Engine/Config/ConsoleVariables.ini] LogConfig: CVar [[r.DumpShaderDebugInfo:2]] deferred - dummy variable created LogConfig: CVar [[r.Shaders.WarningsAsErrors:0 ;; 0: off, 1: global shaders, 2: all]] deferred - dummy variable created LogConfig: CVar [[p.chaos.AllowCreatePhysxBodies:1]] deferred - dummy variable created LogConfig: CVar [[fx.SkipVectorVMBackendOptimizations:1]] deferred - dummy variable created [2024.06.01-22.23.48:400][ 0]LogConfig: Applying CVar settings from Section [Startup_Windows] File [../../../Engine/Config/ConsoleVariables.ini] [2024.06.01-22.23.48:400][ 0]LogConfig: Applying CVar settings from Section [ConsoleVariables] File [Engine] [2024.06.01-22.23.48:400][ 0]LogConfig: Set CVar [[memory.MemoryPressureCriticalThresholdMB:512]] [2024.06.01-22.23.48:400][ 0]LogInit: Computer: SHADOW [2024.06.01-22.23.48:400][ 0]LogInit: User: wjoyn [2024.06.01-22.23.48:400][ 0]LogInit: CPU Page size=4096, Cores=14 [2024.06.01-22.23.48:400][ 0]LogInit: High frequency timer resolution =10.000000 MHz [2024.06.01-22.23.48:519][ 0]LogMemory: Process is running as part of a Windows Job with separate resource limits [2024.06.01-22.23.48:519][ 0]LogMemory: Memory total: Physical=31.8GB (32GB approx) Virtual=33.8GB [2024.06.01-22.23.48:519][ 0]LogMemory: Platform Memory Stats for WindowsEditor [2024.06.01-22.23.48:519][ 0]LogMemory: Process Physical Memory: 53.18 MB used, 53.75 MB peak [2024.06.01-22.23.48:519][ 0]LogMemory: Process Virtual Memory: 112.80 MB used, 112.80 MB peak [2024.06.01-22.23.48:519][ 0]LogMemory: Physical Memory: 11902.70 MB used, 20695.80 MB free, 32598.50 MB total [2024.06.01-22.23.48:519][ 0]LogMemory: Virtual Memory: 14361.61 MB used, 20284.89 MB free, 34646.50 MB total [2024.06.01-22.23.48:523][ 0]LogUObjectArray: 484 objects as part of root set at end of initial load. [2024.06.01-22.23.48:523][ 0]LogUObjectAllocator: 98008 out of 0 bytes used by permanent object pool. [2024.06.01-22.23.48:523][ 0]LogUObjectArray: CloseDisregardForGC: 0/0 objects in disregard for GC pool [2024.06.01-22.23.48:523][ 0]LogInit: Using OS detected language (en-US). [2024.06.01-22.23.48:523][ 0]LogInit: Using OS detected locale (en-US). [2024.06.01-22.23.48:524][ 0]LogTextLocalizationManager: No specific localization for 'en-US' exists, so 'en' will be used for the language. [2024.06.01-22.23.48:547][ 0]LogInit: Using OS detected language (en-US). [2024.06.01-22.23.48:547][ 0]LogInit: Using OS detected locale (en-US). [2024.06.01-22.23.48:547][ 0]LogTextLocalizationManager: No localization for 'en-US' exists, so 'en' will be used for the language. [2024.06.01-22.23.48:548][ 0]LogTextLocalizationManager: No localization for 'en-US' exists, so 'en' will be used for the locale. [2024.06.01-22.23.48:551][ 0]LogPackageLocalizationCache: Processed 2 localized package path(s) for 1 prioritized culture(s) in 0.000087 seconds [2024.06.01-22.23.48:551][ 0]LogInit: Setting process to per monitor DPI aware [2024.06.01-22.23.48:555][ 0]LogWindowsTextInputMethodSystem: Available input methods: [2024.06.01-22.23.48:555][ 0]LogWindowsTextInputMethodSystem: - English (United States) - (Keyboard). [2024.06.01-22.23.48:555][ 0]LogWindowsTextInputMethodSystem: Activated input method: English (United States) - (Keyboard). [2024.06.01-22.23.48:571][ 0]LogSlate: New Slate User Created. Platform User Id 0, User Index 0, Is Virtual User: 0 [2024.06.01-22.23.48:571][ 0]LogSlate: Slate User Registered. User Index 0, Is Virtual User: 0 [2024.06.01-22.23.48:583][ 0]LogSlate: Using FreeType 2.10.0 [2024.06.01-22.23.48:583][ 0]LogSlate: SlateFontServices - WITH_FREETYPE: 1, WITH_HARFBUZZ: 1 [2024.06.01-22.23.48:587][ 0]LogStandaloneRenderer: D3D11 adapters settings: [2024.06.01-22.23.48:587][ 0]LogStandaloneRenderer: D3D11 adapters: [2024.06.01-22.23.48:587][ 0]LogStandaloneRenderer: Testing D3D11 adapter: 0. Description: 'NVIDIA GeForce RTX 4070 Ti SUPER'. VendorId: 10de. DeviceId: 2705. [2024.06.01-22.23.48:663][ 0]LogStandaloneRenderer: 0. 'NVIDIA GeForce RTX 4070 Ti SUPER'. Feature level: 11_1 [2024.06.01-22.23.48:663][ 0]LogStandaloneRenderer: Testing D3D11 adapter: 1. Description: 'Microsoft Basic Render Driver'. VendorId: 1414. DeviceId: 008c. [2024.06.01-22.23.48:664][ 0]LogStandaloneRenderer: 1. 'Microsoft Basic Render Driver'. Feature level: 11_1 [2024.06.01-22.23.48:664][ 0]LogStandaloneRenderer: Skip adapter. [2024.06.01-22.23.48:664][ 0]LogStandaloneRenderer: Selected D3D11 Description: 'NVIDIA GeForce RTX 4070 Ti SUPER'. VendorId: 10de. DeviceId: 2705. [2024.06.01-22.23.48:751][ 0]LogVSAccessor: Display: Unable to create Visual Studio setup instance: 80040154 [2024.06.01-22.23.48:751][ 0]LogVSAccessor: Display: Unable to create Visual Studio setup instance: 80040154 [2024.06.01-22.23.48:752][ 0]LogVSAccessor: Display: Unable to create Visual Studio setup instance: 80040154 [2024.06.01-22.23.48:815][ 0]LogLiveCodingServer: Display: Registered restarted process C:\Unreal Engine\UE_5.4\Engine\Binaries\Win64\UnrealEditor.exe (PID: 19136, previous PID: 18216)

Hey, so I'm a returning player, haven't played since Shadowbringers. I just came back and used up my four days of time for the free login campaign, and decided to resubscribe in preparation for Dawntrail. I go to pay and... "this card is unavailable." WTF. So I look into it and sure enough, there's an issue with the payment processor and it's not taking debit cards(this is my only option for payment) and they suspect it'll be fixed by... sometime in July. WTF. So I look into game time cards. This is also not going to work for me because I'm tight on money and use the entry level subscription. I only have one character and have no need for alts on the same server. And for some stupid reason, there are no entry level game time cards, they only come with the standard subscription and are completely inflexible. At this point I'm pretty pissed off, it's really unacceptable that this issue goes unfixed and coincides with the release of an expansion.

My mom’s speaker was lost or possibly stolen. She told me usually when someone loses something they replace it . It’s been sticking in my head for the last few hours .
I broke 4 doors in the house when I was under the age of 18 I am 21 now . My mom and sister broke my own room door . I calculated all the costs of the doors which is 543. Or somewhat very close to that.
The reason why this is important is because I worked at my mom’s work after high school when I was 18. She did payroll & at the time I didn’t have a debit card . So the money would be deposited onto her PayPal card that I had . But no access to the app or login whatsoever .
She stole $1,000 dollars from me of two weeks of full time work and extra hours . “To replace the doors I broke” …. 3 years later all 4 I broke + the one my mom and sister broke are all the exact same condition not a single door has been replaced.
The doors are three regular bedroom doors which are $60 roughly and then the fire / garage door is $320 (considering my mom has a Home Depot card)
This is sort of nothing me the comment of “what you break or lose of someone else’s then you replace” it’s logic yes and I agree . I broke 4 doors costing $543 which means she stole a little of $500 extra .
My grandparents gave my mom money for new tires for the vehicle I drive . Which is my hand me down car which was and is my moms . It will not ever be signed over to me.
Anyways they gave her $500 and my tires were not replaced , because “she needed the money” . She only told me about this on our way to my grandparents out of state.
I couldn’t tell them anything negative at all or I’d be kicked out of the house. So for those of you from my previous posts that is why I could not tell them anything. Just like I can’t report my mom for stealing my pay because i would be kicked out.
She told me she would not be replacing my tires and that I would have to & also do all the repairs on the car (even though I don’t own it ) but yes I drive it and I do need a car to get to work and home.
I am working on getting a car this summer hopefully before anything serious happens to the car so I don’t have to repair anything . The car was “given” to me with the engine and tire light on and also the low tire pressure light is now on
And yes I’m aware I can get the pressure done for free it just came on recently
I’m just a little conflicted on what I should do about her missing speaker . She stole $500 ish from me and then also cheated me out of tires because she needed the money. I really don’t feel like I should pay for her speaker considering she stole $500 from me and $500 for money for tires .
I want to replace my room door because there is a giant hole in it . My family sticks their hand through and unlocks it to come in . I do want to take the door cost off my rent . I do also want to buy a knob where I could unlock the door from the outside with a key . Which I would also take off my rent. Also including costs for someone to install it.
My rent is $300 . Basically $100 for car insurance, $100 for my phone bill that is on her account etc , and $100 for rent rent . In addition to buying a car that I will own and pay insurance all under my name ; I want to get my own phone that I own.
My drunk father’s rent is also $300 . Which he hasn’t paid in 2 months . I am behind 2 months as well and I don’t really want to pay her rent when my grown adult father doesn’t and he’s 55.
I just need some advice on how to go about this all . I know I should choose my battles . But money is an important one .
Also see my posts on my profile for more context to my situation living with my family if needed

Hi everyone - over the last year I have acquired several cash flowing SaaS businesses and realized it's an exciting space to be in but there's no great, free community for folks to discuss deals, growth strategies, and meet each other.
I’m starting this community as a space for those serious about finding acquiring software businesses. My hope is that it can help people share learnings, talk strategy, and maybe even team up and buy companies together!
Please introduce yourself. We are just getting started with this community, would love to see you there!
https://login.circle.so/sign_up?request_host=community.crucible.fund&user%5Binvitation_token%5D=1386ee8cce9247b9f3a4f0e13f32c155b21697f1-d6df7d99-c3f5-440f-9db2-5cc710f063fb#email

I've gotten accustom to using proton pass (PP) for all my personal and business credentials across multiple organizations. I'm now at the point with a new business where I need to share access to platforms that dont provide team logins for new staff members. With this new business, I'm looking for options/ an approach to share access on a organizational level with staff while keeping things simple from a UX standpoint. Here are my considerations:

1. I want to personally continue to leverage one PP instance (my personal proton pass account) since I use it daily for credentials that are personal, from this new business and multiple other businesses.
   
2. I need this new business' password manager setup to be easily transferrable. Meaning when I sell this business in the future I want to be able to easily transfer access to all company wide credentials and it not be tied to any personal or other business credentials.
   

My idea: I was thinking I could create a new PP paid account with an email from the new business (accounts@newbusiness.com) and create and share various vaults with individual users. I would have the staff create free personal proton pass accounts and then share the specific vaults to the emails they used to sign up. The vault I make and share with my myself would just replace the logins I currently have in my personal proton pass account related to this new business. All new staff would get their appropriate access with individual free proton pass accounts. Lastly, when I sell the business I would simple handoff the login credentials for the paid PP account (accounts@newbusiness.com) to transition company wide account access.
Am I approaching/ thinking about this the right way?