Parts of plant cell labeling worksheet

Viracocha Unbound - Part Twenty: False Bottom

2024.05.19 09:33 FossilBoi Viracocha Unbound - Part Twenty: False Bottom

Once the grisly hunt had ended, we waited until the hunters were over the hill and gone. As we sat in the Reina del Cielo, we processed everything. Not only were the Pullman-Seldano people here and messing up the place, but were going as far as to commit wanton murder on the wildlife. “Ok, guys,” Calderon said, breaking the tense silence. “I know that was awful to see - and take it from me, I’ve seen some shit across the world, all kinds of shit done to animals - but we’ve got to keep going. What if they come back?” We reluctantly agreed, and off we went, initially silently as we feared there may still be some people in the area. We continued northwest along the Yaku River, and as another hour ticked by, we found ourselves at yet another tributary. This time, the one that connects the Yaku, Utjawi, and Kasike Rivers. “Hold on, we gotta do a quick reorientation along the current here,” Calderon announced as he started to prevent the plane from drifting off down the wrong river. But then, as we started our cross, an explosion shook the water, and we were briefly tossed up into the air, landing back down with a tremendous splash. “What the hell? What was that?”
Then the whole river system started to shake, the water bashing against and spilling onto the shores like an overflowing bathtub. As this happened, over the sound of roaring, agitated water came the sound of stone crumbling. Then, as Calderon tried to maneuver to where the river continued to our northwest, one of the hydrofoils made contact with the shoreline, and we were briefly stuck. Once the hydrofoil was dislodged, then our whole right side began to sink, and we saw that the shoreline was collapsing, sand and silt falling into a large space below. With our left side in the air and the water pushing us, we found ourselves falling downward. We fell surprisingly not far down, only about 15 or 20 feet down. We landed in a pool of brownish water, and as the river water and falling sand and silt above followed us down, we looked around to see just what kind of cavity we fell into. Surprisingly (or perhaps not, at this point), it was manmade.
We had landed in a large tunnel dug into the bedrock. The ‘river’ we landed in seemed to be a stream of dirty runoff following the main path of the tunnel route next to us. The end behind us led on into blackness, and the end in front of us was shut away by a steel gate. 30 feet away sat a large vehicle next to stacks of steel crates. This vehicle resembled a massive bulldozer, with several clawed metal arms tucked on the side, giving it a somewhat insectoid appearance. The main blade was divided into two parts, which resembled enormous metal claws then they did a bulldozer blade. As my eyes wandered around the area, I noticed that the vehicle was restrained by chains, with a small sign nearby reading in big red letters: “OUT OF ORDER.” We reluctantly disembarked the plane to assess the damage, and while it wasn’t severe, it was yet another blow that stopped our progress. We had resigned ourselves to our little inconvenient fate when we heard a snarl above us. Looking up and peering over the edge was the head of a toothy gulper. The aquatic dinosaur clearly took an interest in us, and even though it seemed to be deciding whether or not to follow us down, the river made its choice for it, the water shoving the animal down with us, thankfully next to the plane instead of on top of it.
The enormous animal flopped around upon landing and tried to go for us. Running back inside the safety of the plane, we were shoved into the rock wall to our left, and Calderon and Missy aimed weapons at the creature, but didn’t fire yet. As this happened, the toothy gulper tried to wrap itself around the plane. “What are you waiting for? Fire!” Mary Ann yelled. Missy shook her head. “Not yet, it has to line up.” Mary Ann looked confused, approaching Missy’s station. “Now?” Missy shook her head. The creature was now bearing down on our right wing, its elongated body lining up to around the gate. “Now!” Missy exclaimed, and the electrical guns fired. The toothy gulper was shot backwards, flying back at great speed as it’s enormous body collided with the gate, bringing it down with a loud clash. With this came the sounds of further objects clattering. As the dust cleared, the path ahead was shown to be dimly lit, with a row of weak yellow lights along the ceiling. Shelves collapsed as tools and other objects rolled out into view. One of these was unlike the others: a yellow crystal that caught the light as it rolled out, with bits of stone still stuck to it. Then the appearance of the crystal made sense. Viracochite. This was a mine. And the smoking gun? The label on the vehicle not far away, and logo proudly emblazoned on various tools and other items spilling out? Pullman-Seldano.

submitted by FossilBoi to MonarchCustomTitans [link] [comments]

2024.05.19 09:19 Timeworx_io You are the one who trains the AI!

That’s why your role is crucial.
Believe it or not, some simple tasks for us humans, such as identifying objects, sounds, emotions, or specific information on documents, can be tough challenges for our AI friends.
But here's the cool part - your work has an impact! Teaching computers to handle these tasks is incredibly useful in many aspects of our daily lives. Imagine a computer that can quickly extract important info from a massive database, figure out if a ton of feedback is mostly positive or negative, or even identify objects or sounds to control a device you're using.
By helping train computers with the labeled data you generate in the Timeworx.io dApp when solving those fun tasks, you're making technology smarter and more efficient in everyday life.
Ready to be part of this amazing training team? Join us and make a difference! https://timeworx.io/alpha
https://preview.redd.it/1ebkj89u3c1d1.png?width=1200&format=png&auto=webp&s=658dbae24e5dd11fe57b8904a5bb65b453f02e9a

submitted by Timeworx_io to u/Timeworx_io [link] [comments]

2024.05.19 09:05 Alteredchaos 📢 Sunday News - with a focus on carers this week

Ministers apologise and return £7,000 in benefits to woman, 93, with dementia
Government ministers have formally apologised and repaid £7,000 to a 93-year-old woman whom they held responsible for running up benefits overpayment debts even though they were told she had dementia and was unable to manage her affairs.
The case, which the minister for disability, Mims Davies, admitted was “disturbing”, was brought to light by the Guardian as part of its investigation into carer's allowance overpayments.
The agreement to write off the debt of the 93-year-old, whom the Guardian has chosen not to name, comes as ministers have promised to try new ways of sharing information with carers to try to prevent them building up months and years of overpayments.
Read the full article on theguardian.com

DWP confirmed that it is developing an ‘enhanced notification strategy’ to alert carer’s allowance claimants to possible overpayments
Notifications designed to encourage claimants to report changes in income and so reduce the risk of being overpaid.
As part of its policy paper, Fighting Fraud in the Welfare System: Going Further, that was published earlier this week, the Department says (at paragraph 78) -

'In carer’s allowance we are progressing an enhanced notification strategy as part of our existing commitment to improve customer engagement, building on our existing communications with customers. As part of this notification strategy we are considering all forms of targeted contact to find the most effective and efficient solution, such as exploring the use of targeted text messages or emails to alert claimants and encourage them to contact the Department when the DWP is made aware of a potential overpayment.'

The Department added -

'The new strategy will help claimants understand when they may have received an earnings-related overpayment or are at risk of doing so, and will encourage claimants to contact the DWP to meet their obligation to inform the Department of changes in their income and other relevant circumstances. This will reduce the risk of those customers being overpaid.'

Note: having expressed concern that the DWP had 'done nothing' to stop carers building up huge overpayments of benefit despite knowing what people are earning, Work and Pensions Committee Chair Stephen Timms called on the National Audit Office to investigate problems with the carer's allowance system and, in particular, its failure to prevent or rectify overpayments.
Stephen Timms has also written to Secretary for State for Work and Pensions Mel Stride highlighting concerns about the DWP's lack of progress with overpayments since the previous committee's report in 2019. Mr Timms' letter repeats the committee's recommendation that the DWP increase the rate of carer's allowance and goes on to call for the DWP to review both the amount and the cliff-edge nature of the earnings limit and for the removal of the 21-hour study rule.
For more information, see Policy paper: Fighting Fraud in the Welfare System: Going Further from gov.uk

Carers UK has welcomed the DWP's plans, noting this is the 'minimum' they've been calling for to tackle carers' overpayments. However, Director of Policy and Public Affairs Emily Holzhausen also highlights that implementing the strategy is 'urgent', asks that the whole issue be moved out of being branded benefits fraud, and that carer's allowance be reviewed as it should be 'modernised to reflect the realities of caring'.

DWP-commissioned research highlights how the carer’s allowance earnings threshold influences decisions about how many hours carers work
Report also makes clear that the Department was made aware three years ago that there was room to improve claimant understanding and possibly reduce mistakes leading to overpayments by improving its communications.
The research, Experiences of claiming and receiving carer’s allowance, explores how and why people claim carer's allowance; their caring roles; experiences of combining paid work and care; and how well claimants understand the rules associated with the benefit. While carried out in 2020/2021, the research has been published today against a backdrop of calls for the wholescale reform of carer's allowance as a result of evidence that claimants who have earned above the carer's allowance earnings limit have been left with large overpayments and, in some cases, prosecuted for fraud.
While the research found that many claimants in employment felt there was a practical limit to the hours they could work, with many saying it was only feasible to be working part-time due to their caring responsibilities, it also found that -

the earnings threshold appeared to influence decisions about how many hours some people worked. Even though claimants often denied that the threshold influenced their choices, they acknowledged being mindful to stay below the threshold. One claimant felt he had to refuse shifts at work that would take him over the threshold;
in another example, the earnings limit led a claimant to reduce her hours as her wages increased, and eventually she was working so few hours that her employer felt it was not worth employing her due to her limited availability; and
some claimants in paid work felt they might work more hours if not for the earnings threshold, and even suggested tapering the carer’s allowance earnings rule to encourage claimants to work more.

Published on the same day that the Work and Pensions Select Committee said that there has been insufficient progress in addressing the problems with carer's allowance that it highlighted five years ago, the research makes clear that the Department has been aware of the issues for some time. For example, it highlights confusion relating to the complexity of the earnings calculation, including how deductions such as childcare expenses and pension contributions are taken account of, and whether wages can be averaged if you earn more in a particular week.
In addition, with the Chair of the Select Committee Stephen Timms having said recently that the DWP has done nothing to stop carers building up huge overpayments despite knowing what people are earning, and the Committee having called on the National Audit Office to investigate the problems with the system, the research found that -

poor communication on the part of the DWP meant that not all of those that had been overpaid benefit were clear on the reason for the overpayment;
some said that while they were initially notified or questioned about an overpayment there was then no follow-up from the Department; and
when the overpayment was initially raised, several claimants felt that they were spoken to or treated by DWP as though they had intentionally committed fraud when the overpayment had been a misunderstanding.

As a result, the research says -

'... there is room to improve claimant understanding and possibly reduce mistakes leading to overpayments by improving communications around eligibility criteria. Since claimants did not engage with the detail of their benefit regularly, possibly only considering it once a year when they received their annual letter, more frequent communications may improve clarity of knowledge around carer’s allowance.'

Other key findings include that -

most claimants cared for close relatives, with two in five caring for a child (39 per cent), a quarter caring for a spouse or partner (25 per cent), and one in five (22 per cent) caring for a parent;
caring was a long-term and high-intensity commitment, with half of claimants (52 per cent) spending 65 or more hours caring per week and more than half (54 per cent) caring for between 5 and 20 years;
only 16 per cent of carer's allowance claimants were currently in paid work, tending to work part- time in lower paid jobs that they were able to fit around their caring responsibilities, with most (81 per cent) working 20 hours or less a week;
of those not currently in paid work, seven in ten (69 per cent) said this was due to their responsibilities as a carer, with other barriers including a lack of flexible working options, claimants’ own health and confidence issues; and
there was a lag between starting caring and claiming carer's allowance, with seven in ten claimants (70 per cent) caring for 5+ years, but only 3 in 10 (34 per cent) having claimed carer's allowance for that length of time.

For more information, see Experiences of claiming and receiving carer’s allowance from gov.uk

Almost 135,000 people currently have an outstanding carer's allowance debt, with more than £250 million owed in total, according to figures supplied by DWP Minister Paul Maynard
DWP Minister also confirms that women represent 68 per cent of those with an outstanding debt.
Responding to a written question in Parliament from Work and Pensions Committee Chair Stephen Timms, Mr Maynard said -

'As of 14 May 2024, the volume of people who have an outstanding carers allowance debt is 134,800 with a total value of £251 million. This figure represents the total stock and as such the total monetary amount may have been accrued over multiple years. Those who have an outstanding carers allowance debt may no longer be in receipt of the benefit.'

Mr Maynard added that -

'Women make up the majority of carer’s allowance claims, and this is reflected in the proportion of those with an outstanding carer’s allowance debt. As of 14 May 2024, there were 42,800 (32 per cent) males, 91,900 (68 per cent) females and 100 (less than 1 per cent) not identified, with an outstanding carer's allowance debt.'

The Minister also confirmed that, as of November 2023, there were more than 991,000 people in receipt of carer's allowance, consisting of around 271,000 (27 per cent) males and 720,000 (73 per cent) females.
Mr Maynard's written answer is available from parliament.uk

Total value of benefit overpayments in 2023/2024 increased to almost £10 billion, representing 3.7 per cent of benefit expenditure for the year
New DWP figures also show that official error underpayments remained at around £1 billion, and that people could have claimed more than £3 billion more 'if they had provided accurate information about their circumstances'.
In Fraud and error in the benefit system: financial year 2023 to 2024 estimates, the DWP calculates how much money it overpaid or underpaid as a percentage of total benefit expenditure for the year (£266.2bn) - for benefits including universal credit, housing benefit, personal independence payment, employment and support allowance and pension credit - and how many claims were paid an incorrect amount.
Note: the statistics no longer include estimates of claimant error underpayments as these are now published separately, as confirmed in recent DWP guidance.
In relation to incorrect payment rates across all benefits for the financial year ending (FYE) 2024, the figures show that the total rate of benefit expenditure overpaid was 3.7 per cent (£9.7bn), compared with 3.6 per cent (£8.3bn) in 2022/2023. In addition, the total rate of benefit expenditure underpaid was 0.4 per cent (£1.1bn), compared with 0.5 per cent (£1.2bn) in FYE 2023.
Looking in more detail at the figures for individual benefits, the statistics include data showing that -

for universal credit, expenditure increased to £51.9bn in 2024 with an overpayment rate of 12.4 per cent (£6.5bn) and underpayment rate of 0.3 per cent (£180m), compared to expenditure of £43.4 bn, overpayments at 12.7 per cent (£5.5bn) and underpayments at 0.6 per cent (£240m) in FYE 2023;
for personal independence payment (PIP), the overpayment rate was at the lowest recorded level of 0.4 per cent (£90m), compared with 1.1 per cent (£200m) in FYE 2023. However, the underpayment rate went up to 0.4 per cent (£80m), from 0.3 per cent (£60m) the previous year;
for pension credit, the overpayment rate was 9.7 per cent (£520m) in FYE 2024, compared with 6.8 per cent (£330m) in the previous year, with underpayments remaining unchanged at 0.3 per cent (£50m) for both years; and
for housing benefit, almost £1bn (£980m) was overpaid in FYE 2024 (6.3 per cent of expenditure), compared with £860m (5.7 per cent) in 2023. Underpayments remained stable at 0.4 per cent of spending (£50m in FYE 2024 and £60m in FYE 2023).

In addition to the fraud and error statistics, the DWP has also issued Unfulfilled eligibility in the benefit system: Financial Year Ending (FYE) 2024, in line with its decision to remove claimant underpayments from its main fraud and error estimates. The new statistics set out the percentage of benefit expenditure that could have been paid to people with unfulfilled eligibility 'if they had provided the correct information', and show key findings that include -

the unfulfilled eligibility rate for 2024 is 1.2 per cent of expenditure (£3.1bn), compared with 1.0 per cent (£2.3bn) in the previous year; and
universal credit, PIP and disability living allowance (DLA) account for around three-quarters of the total value of unfulfilled eligibility (at £730m, £870m and £750m respectively in FYE 2024).

The DWP highlighted that -

'PIP has the second highest unfulfilled eligibility rate [4 per cent] of all benefits and fairly high expenditure [£21.6bn], so due to this combination, PIP accounts for around one-quarter of total unfulfilled eligibility in FYE 2024. DLA has the highest unfulfilled eligibility rate [11.1 per cent] but relatively low expenditure [£6.8m], so even though its rate is higher than PIP, it accounts for a similar amount of total unfulfilled eligibility in FYE 2024. Universal credit has a lower unfulfilled eligibility rate than DLA and PIP [1.4 per cent] but its high expenditure means that it also accounts for a similar amount of total unfulfilled eligibility in FYE 2024.'

For more information, see Fraud and error in the benefit system: financial year 2023 to 2024 estimates and Unfulfilled eligibility in the benefit system: financial year 2023 to 2024 estimates from gov.uk

Work and Pensions Secretary Mel Stride has set out the DWP's plans to scale up its 'fight against fraudsters'
New measures include using machine learning to detect and prevent fraudulent claims, as well as introducing a new Bill to enable benefit fraud to be treated like tax fraud.
Issuing a written statement in the House of Commons on 13th May, Mr Stride said -

'In the continued fight against fraud, today the Government will publish a new paper setting out the progress we have made in tackling fraud and error in the welfare system - Fighting Fraud in the Welfare System: Going Further. The paper sets out the progress we have made in delivering the commitments in the Government's 2022 command paper Fighting Fraud in the Welfare System and it demonstrates where we are going further to protect taxpayers’ money from fraudsters.'

Highlighting that the Data Protection and Digital Information Bill, currently before Parliament, will enable the Department to work with third parties such as banks to identify claims that signal potential fraud and error, Mr Stride says that the new measures being introduced include -

bringing forward a new Fraud Bill in the next parliament to treat benefit fraud like tax fraud, by providing for the ability to make arrests and conduct searches and seizures by warrant;
exploring a new civil penalty to punish fraudsters, potentially broadening the scope of cases that can receive a penalty when the courts are not prosecuting, and increasing the value of the civil penalty;
tripling the size of the Targeted Case Review programme to reach almost 6,000 staff with the aim of saving £6.6 billion by 2027/2028; and
making changes to universal credit including new partly automated checks on self-employed income, new online prompts for claimants to re-declare their circumstances (such as if they have moved in with a partner), and increasing checks on capital when people claim the benefit to ensure they are eligible.

Note: the Department confirms that final decisions on accepting or stopping a claim will, however, continue to be made by a member of DWP staff.
For more information, see DWP updates Fraud Plan from gov.uk
In response to the above article the Disability News Service reported that the government's fraud policy paper ignores coroner’s concerns over review of disabled woman’s universal credit claim. Read the DNS article on disabilitynewsservice.com

Less than half of legacy benefit claimants who were sent a migration notice between July 2022 and March 2024 have made a claim for universal credit, according to new figures from the DWP
However, new DWP statistics also show that 60 per cent of households that claimed universal credit have been awarded transitional protection.
In Completing the move to Universal Credit: statistics related to the move of households claiming Tax Credits and DWP benefits to Universal Credit: data to end of March 2024, the DWP sets out figures for the period since July 2022, noting that -

'In the period covered by this bulletin, the vast majority of migration notices have been sent to tax credit households whose likelihood of claiming universal credit and receiving transitional protection may be different from DWP legacy benefit claimants, the majority of whom had not yet been sent a migration notice in the period covered in this bulletin.'

The statistics include that -

a total of 824,050 individuals (in 540,070 households) were sent migration notices up to March 2024 - up by around 300,000 and 200,000 respectively compared to the totals for December 2023;
a total of 400,940 individuals (49 per cent of those sent migration notices), living in 275,980 households, have made a claim for universal credit;
of households that have claimed universal credit, 166,860 (60 per cent) have been awarded transitional protection;
a total of 238,990 individuals who were sent migration notices are still going through the managed migration process; and
a total of 184,120 individuals who were sent migration notices have had their legacy benefit claims closed.

Move to Universal Credit statistics, July 2022 to March 2024 is available from gov.uk
Note: the DWP has also published Universal Credit statistics, 29 April 2013 to 11 April 2024 which show that there were 6.7 million people on universal credit in April 2024 (300,000 more than the 6.4 million in January 2024) and that half of households on universal credit that received a payment in February 2024 included children.

Department for Communities also confirms that claimants in receipt of other legacy benefits will be issued with migration notices 'in the coming months'
The Department for Communities (DfC) has confirmed that the 'Move to UC' rollout in Northern Ireland has expanded this week to include people receiving tax credits along with housing benefit.
Announcing the expansion of the process, Deputy Secretary of Work and Health at the DfC Paddy Rooney said -

'We continue to take a measured and carefully managed approach to migrating legacy benefit recipients to universal credit. We have already successfully completed issuing migration notices to tax credit only recipients and we will continue to take every step possible to ensure that everyone receives the help and support they need during this next phase of Move to UC.'

The Department also confirmed that once it has issued migration notices to all those receiving tax credits with housing benefit, the following groups will be contacted in this order -

people claiming income support;
people claiming housing benefit only, and those claiming child tax credit with income-related employment and support allowance (ESA); and
people claiming income-based jobseeker's allowance.

In relation to the bringing forward of managed migration for ESA and ESA/housing benefit claimants in Great Britain, announced by the Prime Minister on 19 April 2024, the DfC says that it is working to assess the impact of this on the region. It also confirms that it will align with the DWP's aim to complete the migration of legacy benefit claimants to universal credit by March 2025.
For more information, see Tax credit with housing benefit recipients next to 'Move to UC' and Rollout of Universal Credit for Tax Credit and Legacy Benefit customers - screening from ni.gov.uk

57,000 adverse universal credit sanction decisions were made in January 2024, according to new DWP statistics
DWP statistics also highlight that around 95 per cent of decisions are as a result of failure to attend or participate in a mandatory interview.
In Benefit sanctions statistics to February 2024, the DWP reports on both the rate and duration of sanctions for universal credit claimants who are in conditionality regimes where they be applied.
Key findings include that -

in February 2024, 30.1 per cent of claimants were in conditionality regimes that were subject to sanctions and, of these, 6.52 per cent were sanctioned - down 0.64 percentage points from the previous quarter;
over the last year, 94.9 per cent of adverse sanction decisions were for failure to attend or participate in a mandatory interview; and
in February 2024, there were 20,000 completed sanctions in the 4 weeks to 13 weeks sanction duration band, 4,800 in the over 13 weeks to 26 weeks duration band, and 4,000 of over 26 weeks duration.

In addition, while the total number of claimants in conditionality regimes where sanctions can be applied has remained largely stable since May 2022 (currently at 1.95 million), the total number of adverse sanction decisions stood at 57,000 in January 2024, the highest since March 2022.
The DWP notes that -

'Comparisons with universal credit prior to February 2024 ... should not be made. This is because the data sources, methodology and rules of the benefits differ from those used for universal credit currently.'

However, it adds that, following the reinstated duration measures and rate methodology improvements, the data is now determined stable and fit for purpose and, as of May 2024, it is published under the 'Official Statistics' label as opposed to 'in development'.
For more information, see Benefit sanctions statistics to February 2024 from gov.uk

DWP has admitted missing multiple opportunities to record the 'vulnerability' of a disabled woman whose death was later linked by a coroner to failings at the heart of its UC system
The Disability News Service reported on the case of Nazerine (known as Naz) Anderson, from Melton Mowbray, who died of an overdose in June last year, after receiving a UC review notice.
According to a prevention of future deaths (PFD) report sent to the department by coroner Fiona Butler, the DWP missed six opportunities to record Anderson’s “vulnerability” on its IT system while it was reviewing her universal credit claim, and had failed to act on the mental distress she showed in phone calls about her claim. It also repeatedly failed to act on requests to direct its telephone calls and letters to her daughter.
The DWP admits multiple universal credit failures before disabled woman’s death article is available on disabilitynewsservice.com

Number of emergency food parcels distributed across the UK by the Trussell Trust has increased by 90 per cent over the past five years
Food charity reports that it distributed more than three million parcels last year, with more than a million of them going to children.
In Emergency food parcel distribution in the UK: April 2023 - March 2024, the Trust says that it distributed 3,121,404 food parcels, the most parcels that it has ever distributed in a financial year, representing a four per cent increase on last year's record-breaking numbers for 2022/2023 and a 94 per cent increase since 2018/2019.
The charity also highlights that the number of parcels provided to children has continued to rise, exceeding 1.1 million in 2023/2024, and that food bank support is provided disproportionately to children, compared to the proportion of children in the UK population. In addition, it notes that pension age households are increasingly likely to need to use a food bank, with food bank support for these households having more than quadrupled between 2018/2019 and 2023/2024 (an increase of 345 per cent), compared to an 81 per cent rise amongst households without someone of pension age.
Also sharing statistics on the reason for referral for an emergency food parcel - which include health, benefit issues, work hour changes, insecure housing, changes in personal circumstances, immigration status and domestic abuse, as well as income and debt levels - the Trussell Trust says -

'Across all households the most common reason for referral was due to issues with income and debt levels. The vital role of the social security system in driving these trends is clear from the fact that the majority (78 per cent) of people referred to food banks were reported to solely have income from the social security system, with a further 8 per cent having earned income as well as income from social security.'

Trussell Trust Chief Executive Emma Revie said -

'It’s 2024 and we’re facing historically high levels of food bank need. As a society, we cannot allow this to continue. We must not let food banks become the new norm ... A supportive social security system is the bedrock on which we end hunger for good. Building on this, we need much more effective employment and financial support for parents, carers and disabled people, and action to ensure everyone can have the security we all need to access opportunities and have hope for the future, through more secure and flexible jobs and investment in social housing. Food banks are not the answer. They will be there to support people as long as they are needed, but our political leaders must take bold action to build a future where everyone has enough money to afford the life’s essentials. The time to act is now.'

For more information, see End of Year Stats from trusselltrust.org

Employment Minister Jo Churchill has provided a House of Lords Select Committee with an undertaking that the administrative earnings threshold (AET) in universal credit will not be increased again without a 'sound evidence base'
However, Minister's evidence to Lords Committee fails to address its dissatisfaction with DWP's explanation for not publishing robust evidence to support previous increases in the threshold.
Further to the Lords Secondary Legislation Scrutiny Committee's report on new regulations that implemented a further increase in the AET from 13 May 2024 - that criticised the ‘inexplicable’ lack of data evaluating previous increases in the threshold in September 2022 and January 2023 - the Committee held a one-off evidence session yesterday to question the Minister and DWP officials.
Introducing the session, Committee Chair Lord Hunt acknowledged that the DWP had agreed to share its informal findings supporting its AET policy. However Lord Hunt added that -

'... similar, no doubt to the material that the Social Security Advisory Committee saw but correctly declined, if information is not available to the House and the public, then we feel unable to consider it either.'

The Committee then questioned the Minister about the Department's failure to publish evidence providing an assessment of the impact of increasing the AET either before or after implementing the change.
In response, Ms Churchill highlighted that the Department did publish a randomised controlled trial evaluation in 2018 providing the highest level of evidence on the impacts of increased in-work conditionality that Ministers have had sight of. When challenged that this evidence is somewhat outdated and 'a bit threadbare' - as it has been relied on for three increases in the AET - Ms Churchill indicated that Ministers also had early sight of unpublished research (a Regression Discontinuity Design (RDD) study) that compares the experiences of claimants who are just below and just above the AET.
When pressed on the expected publication dates for this and further evidence, Mr Churchill said -

'I have asked for [the RDD study] to be available as soon as it can be, and the date I was given was spring 2024 ... I would like it out the door as soon as possible, so you have more data ... RDD is the next piece, the next building block and then, the longitudinal study will come through in 2025.'

Concluding the session with a final question, Lord Hunt, speaking on behalf of the whole Committee, said -

'... we're looking for an undertaking from you, not to further expand the cohort until the Department can publish robust evidence of its effects. Are you able to give us that undertaking?

Ms Churchill responded -

'So are you alluding to us holding 15 hours or with this latest laying at 18? Because I could certainly say to you, I think with all confidence that at 18, we want to understand the iterations and make sure that we've got a sound evidence base from there.'

NB - the increase in the AET in January 2023 was based, for individuals, on the equivalent of them working 15 hours per week at the National Living Wage, and this week's increase to the equivalent of them working 18 hours per week.
Despite welcoming the Minister's reply, Lord Hunt went on to say -

'... we accept your undertaking, except we are still as dissatisfied as we were because you haven't provided, in the view of the Committee, sufficient explanation yet. We are awaiting this robust evidence, which I think that we now expect in June 2024.'

The evidence session Regulations to increase the Administrative Earnings Threshold (Legislative scrutiny) is available from parliament.tv

Work and Pensions Select Committee has called on the government to bring forward proposals to compensate women born in the 1950s who suffered as a result of the DWP's communication failures when their pension age was increased, and asks that it does so in the current parliamentary session
Committee chair highlights lengthy delay and urgency for affected women and calls on government to act on Parliamentary Ombudsman recommendations before summer recess.
Writing to Secretary of State for Work and Pensions Mel Stride, Committee Chair Stephen Timms requests government support for 'urgent action' following the Parliamentary Ombudsman's final report in March 2024 which recommended a remedy based on level 4 of its severity of injustice scale, putting awards at between £1,000 and £2,950.
Mr Timms says that the Committee does not seek to question the Ombudsman's proposal for compensation at level 4, but instead has focused on what a remedy may look like -

'The evidence we received indicated support for a rules-based system. This would be a system where payments would be adjusted within a range (based on the PHSO’s severity of injustice scale) to reflect the extent of change in the individual’s State Pension age and the notice of the change which the individual received. This would mean that the less notice you had of the change and the bigger the change in your SPA, the higher the payment you would receive. While not perfect, the advantages of such a system are that it would be: quick to administer; applying known data to a formula to determine the amount due; and relatively inexpensive (compared to a more bespoke system).'

The Committee's recommendation also includes some flexibility for individuals to make the case for further compensation in the event that they have experienced direct financial loss, for example where a woman whose divorce settlement was less than it would have been because it was based on the expectation that she would receive her state pension at 60.
Mr Timms also asks the government to consider -

'... the need for urgent action, given that the Ombudsman started to look at this issue in 2018 and that every 13 minutes a woman born in the 1950s dies ... Implementing a remedy will need parliamentary time, financial resources, and the data and technical systems only available to your department. It cannot happen without government support. We would ask you to bring forward proposals for a remedy by the summer recess.'

Mr Timms' letter to the Secretary of State for Work and Pensions is available from parliament.uk

submitted by Alteredchaos to DWPhelp [link] [comments]

2024.05.19 09:04 kkimminji Is this skin cancer? 24F

I have this patch of skin on this cheek that I thought was acne but has looked like this for a few months (no healing). In the past it looked infected. Specifically if you look at the part circled there are two pores with a little inflammation around it.. I’m concerned it is basal cell carcinoma.
I’ve also been less diligent with sunscreen since I feel it makes me break out..and also was prescribed adapalene a few months back which I use every three days.

submitted by kkimminji to DermatologyQuestions [link] [comments]

2024.05.19 08:57 Alpheus12 Google Sheets throwing an error and locking me out after a failed REGEX

While trying to create something that included a regex cell, I tested some syntax and the entire sheet froze. After reloading, I'm only greeted by the screen below. (Sensitive info is blurred)
https://preview.redd.it/wz293xmtxb1d1.png?width=1919&format=png&auto=webp&s=dc1e9617d0cbbab385d68fb053742ac3e890e234
The cell containing the code itself hasn't thrown an error or anything, but is just blank. Here is the code of the cell.

=MAKEARRAY(ROWS('Sheet1'!L2:L), COLUMNS(SPLIT(SUBSTITUTE(D8, "🥔, ", ""), ", ", FALSE)), LAMBDA(x, y, ADDRESS(x + 1, 12, 1, TRUE, "Sheet1") & ", " & JOIN(", ", SPLIT(REGEXREPLACE(INDEX(SPLIT(SUBSTITUTE(D8, "🥔, ", ""), ", ", FALSE), 1, 1), "(?:p(\d)\s)?(\b.+\b(?:\s-\s\b.+\b)?)$", "${1:+$1:11}, $2"), ", ", FALSE))))

The part that I think is causing the trouble is the ${1:+$1:11} part. I've tried going on different devices and different accounts, but it's blocked on everything. I'm unable to edit it at all. Is there anything I can do besides copying it manually to another sheet and deleting the cell that's causing the trouble? I'm not searching for a fix on the code. I'd like to maintain the version history of the spreadsheet if it's possible, but it's not needed. I'd also just like to know if that's what caused it in the first place, and if there is something specific I should avoid so this doesn't happen again.

submitted by Alpheus12 to googlesheets [link] [comments]

2024.05.19 08:46 everything_is_stup1d this is my testimony

In kindergarten (sorry I'm from singapore so we follow British but if im not wrong its like 5-6 years old) I already accepted Christ into my life. But my mom is a "I hate Christians!!" kind of person so I didnt dare to tell her anything. I didn't really have a good relationship with my mom cos to her studies are everything and she made me (until now) think that I'm never good enough. And I was only in primary school thinking my mom doesn't like me. I'm worthless, I want to kms. I made plans to grab the knife from the kitchen, jump off and things like that. Eventually I resulted to scratching my own skin cos I feel most pain when it's right at the nerve uk.
My whole life was until the end of primary school (12) was only to do things to make my mom happy. I wouldn't mention a word about Christianity to her. And when my mom was out at night, me, my dad and my sisters would worship. The moment the door opens, I scramble into the room. This also make me walk far from God and I would curse, swear and stuff. One day in P6, the last year of primary school (12 years old) I thought "Hey, I'm Christian so why am I swearing? Isn't this a sin?" So I stopped cursing. Of course, my mom wouldn't want me going around cursing but I didn't really do it for her, but rather for God. But I still didn't want to tell her about it.
When I graduated from Primary school, in Secondary (Sec) school, I finally got to bring my phone to school (13 years old), but my mom still could track me. Anyways I got to listen to some worship songs my dad sent to me and because I didn't have a music player downloaded and wasn't allowed to download any apps, I would listen through the WhatsApp audio player thing😭😭 on the way home. Usually on Sundays whene my mom isn't home,my dad would bring me to church. Then of course my mom would find out and scold me and this continued until sec 2 (14).
In Sec 3 (15 years old), I had whole control of my phone so I would listen to worship music on the way home. One day in, my dad brought me to church. My mom saw my location and immediately got mad because she knew where my dad's church is and also because my older sister attends service too and my mom was not happy. Since then, I was afraid to go to church. My mom even cornered me one day and made me promise not to go to church or I can forget calling her my mom. I kept crying that night and never dared to go to church (mind that i dont even cry often).
But towards mid year(?) I just decided ok Imma go to church. She can get angry but it won't really stop me. Because I got to know God through worship songs and now I wanted to know him more.
I regularly started praying in the morning on the way to school. Eventually my prayers became a ritual and dry. I felt no emotion and no pull towards God. Only on days when I was really upset/angry then I would feel Him comforting me. One day I really wanted to be the captain in my CCA (it's like after school activities but still part of school programs) and I didn't get it. I was so upset I cried on the way home because I actually put in so much effort into it. Then I became vice captain so ig that counts.
Anyways I became really upset and got frustrated because I didn't prove myself enough. I had so low expectations of myself, got depressed again, but I couldn't vent it out because I couldn't hurt myself anymore after learning my body is a temple of God. So I got super frustrated. I prayed for guidance decided to free up my Saturdays I went to church. Youth services for Secondary school students were on Saturdays and not Sundays so yeah. Towards like October last year I cleared up my Saturdays so I could go more regularly to church, and my mom was defo not happy AT ALL that I went with my own initiative. She ignored me for several weeks and of course I felt lonely and all buy eventually I felt okay because she doesn't even know me sooooo.
I'm still trying to patch up my relationship with her. Honestly, it's so strained I don't know what to do. I've prayed that she would accept Christ everyday but uhh nothing. This doesn't mean I don't believe in God if not this would not exist
One day I was fellowshipping with my dad. Why we did that is because of a long story that would be saved for another day.
But this is the part where it's important
Previously I had dreams and I shared with my dad because he is more experience in deciphering gifts and stuff (I'm sorry if you don't believe in gifts but I do!) And he told me to pray about it because I somehow knew these dreams had meaning and relation to God. A number of dreams had direct inference to God. I did pray about it, and also asked God along these lines; "God, give me guidance. I have strayed and I know. Lord please let me understand, and let me also be close to You. I want to know You, and I know, I haven't read the word. Lord, motivate me to read the scripture, and while reading let me also understand the dreams I have been having my whole life."
I can't remember what I said exactly. The one 9f the church sermons on one week talked about how God is not far, but we are far. And I felt that that was for me. Then one day my dad said to me and my older sister "I don't care you have to download the Bible rn" so I downloaded it but did nothing with it. Finally, one day I was late for work (yes I worked when I was 15 because I actually want an electric guitar) and it was New Year's Eve. My colleague texted me saying she'd pick me up and I said and quote "Isokkk I walk over" (me) ... "Give me your block" (colleague) "Omd tyyy" (me)
Part of me didn't want her to fetch me because it would be troubling her. But I don't know why I waited and was thinking "bruh I could've reached by now but she's late" but I just waited. I was wearing full white that day. And this woman must've thought I was going to church because it was a Sunday morning.
And she asked "Hello, are you going to church?"
I said "oh no no, I have church at night because it's countdown service. (basically the youth services brought our church service from Saturday 4pm to Sunday 8pm because we wanted to countdown service together)"
She said," Oh! So you're Christian! Do you read the Word often?"
I blushed because so many signs and I haven't read a single word. "No," I was so embarrassed
She continued "I used to be a teacher, a lecturer in a University (if im not wrong) There is a website called 7 minutes with God. It was originally created for Harvard students because they were busy and didn't have time to spend time with God." Then I couldn't hear what she said because she was talking so fast. All I knew was she was summarizing the website and encouraged me to read it.
I read it like on January 2nd this year on the way to school ( I'm 16 this year!!! But not 16 yet because as I said, it's not my birthday yet or anytime soon)
I was so inspired that I kept on reading the Word and devoted mornings to not only prayers (that I allowed God to guide me and not just pray for the sake of praying) but also for reading the Word!
See, when I prayed to have motivation to read the Word more, God gave me the sign THREE TIMES which I did not pick up until the 3rd sign, the lady. The first time during the sermon I was like "Yes God, I will do it!" but did nothing. The second time when my dad asked me to download the app version of the Bible, I said "Yes God, this is the sign!" and did not do anything. I got discouraged because my dad thinks I'm funny and wouldn't take my words seriously omd 😭. But the third time, God literally sent a random woman I don't know and told me to read. And I read, praise God!
this is the part where it relates to the meme
Because when I went to the shower I kept laughing because I thought of this meme. I didn't read the word or get touched because it was a coincidence. So coincidence? I think not! It's a miracle ❤️❤️❤️
I finished Mark and the New Testament, I'm currently at John right now.
Just now, after a meeting with my cell group (a small group for easier prayers etc in church), I was listening to worship music, and my grumpy dad was like "GO AND SHOWER" liek chill brou. So I went to the toilet with my headphones on and sat on the floor and just continued listening to worship music. Then my dad sent in the family group chat (just me, my older sister and him, my mom got mad and left) an article about this man called Patrick Lee/Bezalel. He is a local artist faithful in Christ
But reading halfway I kept crying because I was so touched (again I do no lt cry, but I related so much I cried even though nothing had to do with me, but it was like my mother's story where she had a hard of stone towards God) and then my phone went flat 😐 So I risked it and ran out to get my charger but thank God (like actually) my dad didn't scream like he would. Then I sat at the toilet floor and continued reading. Tears kept flowing down my face because Patrick Bezalel's story was such a miracle, and God kept giving him signs that God existed! And removed the layer of stone that surrounded the man's heart and made it soft and open to God again!
After that I continued worshipping God and was listening to worship music (yes in the toilet because I literally have 0 privacy because none of my parents think I need it). I kept crying because the songs were so related. Can you imagine? It went in this order:
1.Presence,Power,Glory 2.Hosanna 3.Promises 4.Holy Forever
Again, coincidence? I THINK NOT. It was so planned, like it was in my playlist for so long and I haven't really thought much about it. Tears kept streaming down and kept going and through sobs I silently prayed to God
"Oh my dear God you have been so so good to me, and so faithful to me Lord. You have guided me, guided my heart and nothing has gone wrong in Your hands Lord. I've been through the turning point I've prayed for. You have sent people, songs and my family members to come after me to open up to You Lord. Lord, I was having a CG (cell group) meeting and something just touched my heart. I am now sitting on the toilet floor and typing this, because Lord you have made a way to touch my heart, guide me through a prayer that came deep down from inside of me Lord, thank You for providing. Thank You God for the miracles You have did in my life, and all that I prayed for has came through Lord. The turning point I prayed for was when that lady had spoken to me about how to set aside time for You and the Word. Lord let me not forget this incident, this turning point, this miracle Lord. Let me put my trust in You Lord, and let You take my hand and let my life be walking next to You faithfully Lord. Lord I pray that I would not waver, and I would not take my eyes away from You. Even when I am crossing and walking toward You on water in the sea, let my eyes be on You, and the works You have done for me, and not be distracted by the worls around me, but to keep my eyes on You diligently Lord. Lord, I am a sinner, and now, I was, for You have sent Jesus Christ, Your Son, to die on the cross for me. Lord, I believe in You and I want to accept You in my life Lord, no matter what situation I am in. Lord, let people around me see Your love, joy, and faithfulness in me, and not let them see the girl I was before. Let them see change, and the love and desire I have for You, Lord. Let them see Your greatness, Your goodness and You. I thank You for everything You have done, and in Jesus's name, I pray that I will walk faithfully alongside You, and will not fail to continuously pray and worship You God. Thank You Lord for the miracles, for this turning point. Thank You God for guiding me, and let me be the branch that bears fruit, and let me be the branch that has life only through Jesus, Who is the vine, Who the reason I live Lord, Who is the reason I have life. Praise the Lord! Amen!"
This is the first time I prayed for so long and every one word was truly from deep down fron the depths of my heart. I couldn't stop crying. I really couldn't and I can't emphasize more that I don't cry often! Either it hurt me so much or that God moved my heart. This time was tears of joy.
I hope this could inspire someone out there, because in another prayer I prayed for those who needed God, even if I didn't know them.
Pray. Pray and ask God to help you seek Him. One thing I learnt from a sermon is the fervency in your prayers. I didn't mean to add this in but I suddenly saw this note I wrote on 25th February.
Title: fervency in prayer Fervency: being excited about something keen on something
At the heart of revival is the spirit of prayer • pray fervently • pray with faith
"But Jesus often withdrew to lonely places and prayed"
To be fervent in prayer is to pray tenaciously despite our struggles
Hopefully this helped someone out there, inspired you and is one of your signs to start giving your life to Him! It is actually proven 1 in 3 people are Christians. Isn't our goal to have this faith to reach all four corners of the world? It could sound impossible in the past, but now there is social media, anyone could read and realize "Hey God is actually with me!"

submitted by everything_is_stup1d to TrueChristian [link] [comments]

2024.05.19 08:45 GhoulGriin Best Car Wash Cannons

https://preview.redd.it/ujf931rfxb1d1.jpg?width=720&format=pjpg&auto=webp&s=861903c2527ffc86dae7c3ee4d70e9d9cb7971c3
Get ready to impress with the ultimate car washing companion - the Car Wash Cannons! In this roundup, we'll explore the best gear on the market that'll make your car shine like new. Say goodbye to dirty windows and spots on your vehicle with these top-rated products. So buckle up your car detailing apron, and let's dive in!

The Top 19 Best Car Wash Cannons

Heavy Duty Foam Cannon for Motorcycle & Car Washing - Satisfy your car wash needs with the FGDCHNJ Pressure Washer Foam Cannon, a versatile and safe heavy-duty option designed for motorcycle, car, and SUV detailing.
Maximum Foam Output 3D Ultra Blast Foam Car Wash Cannon - Experience maximum suds and cleaning power with the 3D Ultra Blast Foamer Car Wash Foam Cannon, expertly designed for any size vehicle and pressure washer.
Premium Foam Cannon for Detailing Trucks - Revamp your car wash routine with TriNova's Foam Cannon and Gallon Car Wash Soap Kit - the ultimate solution for detailing trucks!
Total Wash Street Foam Cannon Bundle - Clean your car like a pro with the First Purchase Total Wash Street Foam Cannon Kit, including a bonus cartridge, HydraCoat Quick Detailer, and Total Wash Heavy Duty, all for a limited time!
Ultimate Touchless Wash Bundle for Effortless Vehicle Cleaning - Upgrade your car wash routine with the Touchless Foam Cannon Kit, offering a safe and easy touchless wash experience with maximum PSI options.
High-Pressure Car Wash Cannons for Effortless Foam Application - Enhance your car washing experience with the GDHXW X-887 High Pressure Washer Snow Foam Lance Cannon, featuring a 3000PSI rated pressure and 7 different spray angles for versatile application.
Car Wash Cannon: Easy, Foam Soap Blasting System - Transform your car washing routine with the Carwash Cannon Foam Soap Blaster – a professional-quality system that delivers thick cleansing foam in just a few sprays, leaving your car clean and residue-free!
Car Wash Foam Cannon with Adjustable Thickness - Wash your car faster and safer with the Proper Detailing Co. Foam Cannon, featuring extra 1.1 & 1.25 orifice, a wide mouth design, and adjustable thickness knob for easy use and consistent foaming action - perfect for electric or gas pressure washers!
Effortless Car Wash Foam Cannon: Powerful Cleaning with Non-Tip Design - Effortlessly wash your vehicle with Armor All Foam Cannon, a powerful, user-friendly pressure washer add-on that maximizes cleaning results and saves time.
Powerful Car Wash Foam Cannon Kit for Pressure Washers - Boost your cleaning efficiency and create thicker foam with the MTM Hydro 28 Special PF22.2 Foam Cannon Kit, featuring an adjustable spray gun, high-pressure foam power washer attachment, and compatibility with pressure washers.
MTM Hydro Ultimate Car Wash Cannon Kit with Spray Gun and Stainless Steel Fittings - Experience professional-grade car cleaning with the MTM Hydro Ultimate Foam Cannon and Spray Gun Kit, featuring integrated swivel, adjustable nozzle, and stainless steel components for versatile, efficient, and effective vehicle washing.
Professional Car Wash Foam Cannon for Touchless Cleaning - Upgrade your car wash game with the Suds Lab F1 Professional Foam Cannon – a science-based solution for a luxurious, foamy wash that leaves your car spotless in no time!
Ultimate Car Wash Foam Gun for Pressure Washer Accessories Kit - Get ready for a foam-tastic car wash experience with this versatile Foam Cannon for Pressure Washer, engineered with easy usage, maximum foam, and snow foam car wash soap, perfect for all car enthusiasts!
UltraBlast Foam Cannon: Elevate Your Car Wash Routine - Upgrade your car wash routine to a pro-level clean with Grip Clean's UltraBlast Foam Cannon, delivering unmatched foaming power for exceptional results on vehicles of all types!
MTM Hydro PF22.2 Foam Cannon: Ultimate Car Wash Solution with Adjustable Spray Pattern and Chemical Injection - The MTM Hydro PF22.2 Foam Cannon offers exceptional reliability and versatility, with adjustable fan blades, a two-stage nozzle, and ergonomic design, making it the ultimate choice for efficient and effective car washing.
Versatile Car Wash Foam Gun Sprayer & Microfiber Wash Mitt Kit - SwiftJet's foam gun with microfiber mitt is a versatile and durable car wash kit, perfect for washing cars, motorcycles, and more, with no rust and an adjustable cannon for easy maneuverability.
High-Pressure Foam Cannon for Car Washing and More - Transform any pressure washer into a powerful foam cannon with MTM Hydro Original Foam Cannon, providing optimal foam output, temperature, and versatility for car washing and more.
Foam Cannon for Detailing Tasks - Adjustable Pressure and Flow - The Active Stainless Steel Foam Cannon is a top-rated, versatile and easy-to-use tool perfect for your DIY detailing needs, with a 1000ml easy grip bottle design, adjustable fan and jet spray, and interchangeable nozzles for optimal results.
High-Pressure Snow Foam Canon for Touchless Car Wash - Experience a touchless car wash with ease using this versatile High-Pressure Snow Foam Cannon Foamer Only, offering an adjustable foam cannon in a 1 Liter bottle for exceptional cleaning results.

As an Amazon™ Associate, we earn from qualifying purchases.

Reviews

🔗Heavy Duty Foam Cannon for Motorcycle & Car Washing

https://preview.redd.it/qe9gzk7gxb1d1.jpg?width=720&format=pjpg&auto=webp&s=3de9f922dfbb141bcd1e7f303765c4608a5b6e2b
Last year, I got myself the FGDCHNJ Pressure Washer Foam Cannon for my daily car washing routine. I have the foam wash gun mounted on my pressure washer, and it has been a game changer for my cleaning game.
The heavy-duty brass material of the foam cannon makes it sturdy and long-lasting, perfect for both residential and commercial usage. It's been months since I got it, and it still works like brand new! I'm surprised how versatile this foam cannon is.
One thing I love about this foam cannon is the adjustable foam thickness level and spray angles. It's super easy to use, and I can switch it up to match my washing needs effortlessly. The wide-mouth bottle design also ensures that I'm using the foam efficiently without causing any cracks, which is fantastic.
I have the foam cannon on a 2-5.3 GPM pressure washer that works with a 1/4 inch connector, and it's compatible with pressure washer connectors ranging from 725-4,000 PSI operating pressure. It can handle up to 60°C/140°F max temp.
While I've had a great experience with it, there's one small con. The foam cannon is made in China, so some users experienced issues with receiving counterfeit products. But, the good news is that it has a free replacement policy if you face any defects. Overall, I'm satisfied with my purchase and highly recommend it for anyone looking for a durable and efficient car wash foam cannon.

🔗Maximum Foam Output 3D Ultra Blast Foam Car Wash Cannon

https://preview.redd.it/n0qeiqlgxb1d1.jpg?width=720&format=pjpg&auto=webp&s=f76cc48491a9c068ae4a6af8a50411bdfdb45c34
Have you ever wished there was a better way to clean your car? 3D's Ultra Blast Foamer Car Wash Foam Cannon does just that with its shaving cream-like foam coverage and adjustable spray nozzle. This foam cannon is a game changer, turning car washing into a fun and efficient experience. The 1 liter soap reservoir holds plenty of solution to cover even the largest vehicles with a luxurious, creamy foam.
Using this foam cannon has been a game-changer for my detailing business. With just one fill-up, I can complete 6 or more vehicles, including cars and SUVs. The thick plastic bottle and robust foam blaster nozzle, made of sturdy plastic and metal, add great longevity to this little piece of equipment. The foam cannon not only makes washing a breeze, but it also lubricates the finish better, making washing safer. Using the Ultra Blast Foamer Car Wash Foam Cannon will leave you with flawless car images to share on your social media platforms – a true testament to its effectiveness. Give this amazing foam cannon a try and revolutionize the way you clean your car!

🔗Premium Foam Cannon for Detailing Trucks

https://preview.redd.it/pnwda4vgxb1d1.jpg?width=720&format=pjpg&auto=webp&s=548636012b9cc8511f0c3d5ca873751b8bcbedc5
I've had the chance to use TriNova's Foam Cannon and Gallon Car Wash Soap Kit, and I must say, it's been quite the experience. Whenever my car is in desperate need of a deep cleaning, I rely on this set to help me out.
The foam cannon is a game-changer, and its compatibility with standard pressure washer quick connect attachments makes it easily accessible to anyone. Adjusting the nozzle for narrow or wide steam and using the air intake knob to create more or less foam ensures that my ride gets the attention it deserves.
One of the features that stood out to me was the option to use a narrow or wide steam. This allowed me to target specific areas of my car that needed extra attention, like under the wheel wells and engine bay. I also appreciated the ease of use with its attachments being easy to connect to my pressure washer wand.
However, the price tag can be a bit steep for some users. I've noticed that the plastic bottle isn't the most durable, so I would proceed with caution while handling it to prevent any damages.
All in all, TriNova's Foam Cannon and Gallon Car Wash Soap Kit have proved to be a valuable addition to my car care routine. Its performance and convenience have made washing my car a breeze, and I highly recommend it to anyone in need of a top-notch car wash set.

🔗Total Wash Street Foam Cannon Bundle

https://preview.redd.it/wa36vyahxb1d1.jpg?width=720&format=pjpg&auto=webp&s=e81d74a58e38de0d504e7ccb8eca5d7549be39a9
I recently tried the First Purchase Total Wash Street Foam Cannon Kit, and I must say, it's been quite the game-changer for my car washing routine. This kit offers not just a single cannon but also an additional cartridge, a HydraCoat Quick Detailer, and a Total Wash Heavy Duty ($65 value) for free.
One of the standout features I noticed is how fast and convenient this kit is, especially when it comes to covering large surface areas in a short amount of time. It's perfect for those of us who are constantly on the go and don't have the luxury to spend hours washing our cars.
The Total Wash Street offers an impressive thick lather that is safe on all surfaces and finishes. With just one cartridge, it makes over 5 gallons of highly effective wash, which is incredibly cost-effective in the long run.
While I appreciated the added value of the free products and the convenience of the Total Wash Street Foam Cannon Kit, there were some minor drawbacks. For one, I found that the spray pattern wasn't as even as I'd hoped, requiring a bit more effort to ensure the car was completely covered.
Overall, however, I'm quite satisfied with my experience using the First Purchase Total Wash Street Foam Cannon Kit, and I look forward to continuing to use it for my car washing needs. Despite the minor drawbacks, the kit's versatility, cost-effectiveness, and time-saving capabilities make it a worthwhile investment for any busy car owner.

🔗Ultimate Touchless Wash Bundle for Effortless Vehicle Cleaning

https://preview.redd.it/06tb62mhxb1d1.jpg?width=720&format=pjpg&auto=webp&s=9b6db58872d35283e33663612ab43c6ebc2223d5
I recently had the pleasure of trying out the Touchless Foam Cannon Kit, and let me tell you, it's a game-changer for car enthusiasts. The kit includes everything you need to make your car washing experience a breeze.
The first thing that really impressed me was the quality of the foam. It's so rich and thick, it practically clings to the car, ensuring every inch is covered. The concentrated foam soap not only removes stubborn stains but also leaves my car with a stunning shine.
Now, let's talk about the pressure washer foam cannons. They're a real treat! With the option of choosing between a max PSI of 3,000 and 5,000, you can tailor your wash to your vehicle's needs. The cannons make the washing process effortless and mess-free.
However, as with any product, there were a couple of minor drawbacks. I found the instructions a bit vague, which made getting the hang of it a bit tricky at first. But once I figured it out, it was smooth sailing.
All in all, I'm incredibly satisfied with this Touchless Foam Cannon Kit. It's easy to use, highly effective, and a must-have for anyone who values their car's appearance. I'd highly recommend it to anyone looking to make their car washing routine stress-free and efficient.

🔗High-Pressure Car Wash Cannons for Effortless Foam Application

https://preview.redd.it/dfpa1u3ixb1d1.jpg?width=720&format=pjpg&auto=webp&s=0585b3e0826e674aa5e106c4f5a8391ca10d0289
As someone who enjoys keeping my car clean and shiny, I recently gave the GDHXW X-887 High Pressure Washer Gun a try. This little gadget packs a punch, with a 3000 PSI rating that left my car looking brand new. The foam lance, with a 1/4" quick connector fitting, made the washing process a breeze, as I simply had to fill it with warm water and a bit of soap.
One nifty feature of this pressure washer gun is the adjustable spray nozzle, which allowed me to find the perfect stream of water for my needs. With 7 different spray angles, I could easily switch between watering my plants, washing my car, and even cleaning my driveway with ease. The core, made of quality brass, added a layer of durability to the device, and its solid brass body made it quite heavy.
Now, there were a couple of things that could have been better. First, connecting it to my garden water pipe turned out to be quite a challenge, as the product's instructions didn't quite line up with the hardware I had. Secondly, it wasn't as ideal for professional use as I had hoped - the spray nozzle seemed to need a bit more tweaking to get it to work just right.
Despite these minor drawbacks, the GDHXW X-887 High Pressure Washer Gun has proven to be a reliable tool for car cleaning enthusiasts like myself. With its adjustable spray nozzle, sturdy build, and surprisingly powerful pressure, this device has become an invaluable companion on my car cleaning journey.

🔗Car Wash Cannon: Easy, Foam Soap Blasting System

https://preview.redd.it/3gxs1ibixb1d1.jpg?width=720&format=pjpg&auto=webp&s=3d97abe8edc40d994b37ebefa4cc69113127c586
I recently tried this Carwash Cannon Foam Soap Blaster, and it turned out to be quite the experience. I have to say, the ease of use and convenience of this product impressed me right away. It was simple to attach to my garden hose and start blasting foam all over my car.
One of the standout features for me was the 5 different spray settings. I found that the foam setting between 3-5 (high) worked particularly well in covering my car in thick, cleansing foam. After letting it soak for a while, I used a wash mitt to scrub each section of the car and then rinsed it off, revealing a clean and shiny finish.
However, I did find that it didn't completely eliminate the need for manual scrubbing. Some stubborn spots still required a bit of elbow grease to remove, but overall, the carwash cannon made the process much more enjoyable and efficient.
In terms of cons, one thing I noticed was that the foam gun's performance seemed to vary slightly between uses. Sometimes it would produce a thick, generous foam, while other times it seemed to produce less foam with less force. Although this didn't significantly impact the overall cleaning experience, it did require some adjustment in technique when washing different areas of the car.
Overall, I'm quite pleased with this Carwash Cannon Foam Soap Blaster. It has definitely made my car washing experience easier and more enjoyable. By using the right soap and paying attention to the foam settings, it delivers impressive results, and I'd recommend it for anyone looking to make their car washing routine more efficient and less of a hassle.

🔗Car Wash Foam Cannon with Adjustable Thickness

https://preview.redd.it/y1pkxkrixb1d1.jpg?width=720&format=pjpg&auto=webp&s=7ee8a52edbe0923dee9ca7285078d126886e22cb
I recently tried the Foam Cannon from Proper Detailing Co. to make washing my car safer and quicker. One of the standout features is the wide mouth design that makes filling the cannon a breeze - just add water and foam shampoo. This cannon can be used with both electric and gas pressure washers, making it versatile and easy to use.
I also love the stainless pickup tube filter, which ensures consistent foaming action even when I'm spraying at an angle. Another great advantage is the simplicity of the thickness knob, which makes it easy to control the ratio of foam to water. By turning the knob, I can achieve the perfect snowfoam for a sparkling clean car.
The Foam Cannon from Proper Detailing Co. not only saves time but also keeps my car safe by creating a safe lubricant for washing without scratching or marring the paint. This quality product made by an Atlanta-based brand has made my car washing experience more enjoyable and hassle-free.

🔗Effortless Car Wash Foam Cannon: Powerful Cleaning with Non-Tip Design

https://preview.redd.it/08v2dj2jxb1d1.jpg?width=720&format=pjpg&auto=webp&s=1a47eff1d3a8519789784fb5a39e00770cab8349
I've been using the Armor All Foam Cannon in my daily life, and I must say it made my car washing routine a lot more enjoyable and efficient. The foam cannon not only saves me time but also provides better results as it evenly coats my vehicle with less effort, making it easier to clean and removing dirt and grime more effectively.
One of the key aspects I appreciated about this foam cannon was its ease of use. The non-slip grip, along with the wide, non-tip bottle, ensures that I can control the foam cannon with ease while it effectively covers my car. Moreover, being compatible with a 1/4 inch Quick-Connect tip makes it more versatile and convenient to use, even with my existing pressure washer.
While I've had a positive experience with the Armor All Foam Cannon, there was one thing that I found slightly frustrating. The 1/4 inch Quick-Connect tip that came with it didn't match my power washer perfectly, which led to an occasional overflow of foam and a messier experience. However, once I figured out the right Quick-Connect tip for my pressure washer, it made the foam cannon even more practical and efficient.
In conclusion, the Armor All Foam Cannon has made my car washing experience a lot better, and I'm happy to see improvements in both the appearance of my car and my overall satisfaction. Despite the initial hiccup with the Quick-Connect tip, the foam cannon remains a practical and smart solution for anyone looking to simplify their car washing routine.

🔗Powerful Car Wash Foam Cannon Kit for Pressure Washers

https://preview.redd.it/ozwy6djjxb1d1.jpg?width=720&format=pjpg&auto=webp&s=3e95b77d8e14ccb064c38c7d3b9e859fd332a23b
Recently, I had a chance to use the MTM Hydro 28 Special PF22.2 Foam Cannon Kit as a car wash solution for my weekend projects. The kit includes everything you need for a pressure washer attachment, from plug adapters to fittings. The swivel function on the SG28 Spray Gun is a game-changer, as it prevents tangles while changing directions.
The PF22.2 Foam Cannon itself is impressive, creating a consistent foam that helps deep clean the surface while saving time. However, one drawback I experienced is that it might not be the most efficient for larger surfaces like houses or fences.
When I tested the product on my car, it delivered a thorough and even clean. The adjustable fan blades and 2-stage nozzle are great additions, allowing me to control the flow and coverage of the foam. The car wash gun's flexibility made it perfect for cleaning nooks and crannies around my car.
Overall, the MTM Hydro 28 Special PF22.2 Foam Cannon Kit is a powerful and versatile tool for anyone looking to make their car washing routine more efficient and eco-friendly.

🔗MTM Hydro Ultimate Car Wash Cannon Kit with Spray Gun and Stainless Steel Fittings

https://preview.redd.it/ce11z92kxb1d1.jpg?width=720&format=pjpg&auto=webp&s=403b81a15e21b5a879503797e494d71ff8b4fb83
When I first tried the MTM Hydro Ultimate Foam Cannon Kit and Spray Gun, I was impressed by how quickly and efficiently it cleaned my car. The integrated swivel gun and stainless steel fittings made maneuvering it a breeze, even in tight spaces. One of my favorite features is the adjustable nozzle, which allowed me to control the amount of foam I needed to get rid of stubborn dirt and grime.
However, I did notice that the maximum pressure it could handle was only 5,000 PSI and 12 GPM. Despite this, the car wash foam cannon still produced a thick and effective cleaner for my vehicle. With its compatibility with various pressure washers and its ability to eliminate the need for reaching, the MTM Hydro Ultimate Foam Cannon Kit and Spray Gun is definitely a must-have for both home and professional cleaning needs.

🔗Professional Car Wash Foam Cannon for Touchless Cleaning

https://preview.redd.it/p9e1zvckxb1d1.jpg?width=720&format=pjpg&auto=webp&s=7fe0cc26f0649a50d06504a6b3a2f9d6adef7144
The Suds Lab F1 Professional Foam Cannon has been a game-changer in my car washing routine. Its ability to transform liquid soap into a luxurious foam that easily covers my car in a matter of minutes is truly remarkable. The installation process is a breeze, requiring no additional tools and simply needing to be attached to my pressure washer.
One of the standout features for me is the adjustable foam control, which allows me to fully control the level of foam dispensed. This has been incredibly useful in saving my soap, and I no longer have to rely on the traditional sponge and bucket method. The 32-ounce canister size adds to its convenience, ensuring a sufficient amount of soap for multiple washes.
However, there is a downside to this foam cannon. It can be quite bulky, as it measures approximately 6.89 inches in length and 9.84 inches in height. This makes it a bit challenging to store when not in use. Also, the pressure wash can be quite powerful, which means it may not be suitable for delicate surfaces or those who prefer a gentler wash. Overall, the Suds Lab F1 Professional Foam Cannon is a fantastic tool for anyone looking to streamline their car washing process, but its size and power level should be considered before making a purchase.

🔗Ultimate Car Wash Foam Gun for Pressure Washer Accessories Kit

https://preview.redd.it/ps2d0upkxb1d1.jpg?width=720&format=pjpg&auto=webp&s=6cd31410aa949e25072fa60beff226b38cb31355
I remember the first time I tested this foam cannon for my pressure washer. It was a game-changer! The powerful 1.1mm valve created the most impressive foam I'd ever seen. It made washing my car so much more effective and enjoyable. I was impressed by how easy it was to use - simply add soap, fill with water, and shake to create the perfect car wash foam. The adjustable nozzle allowed me to control the spray pattern, making the experience even better.
One of the things I loved about this foam cannon is its durability. The wide neck design ensures it won't crack, even under heavy use. I've used it multiple times now, and it still performs excellently. Plus, the fact that it comes with Snow Foam Car Wash Soap makes it a perfect car wash kit.
However, there was one aspect I found a bit annoying - the foam cannon can be quite heavy when filled with water. But overall, I'd highly recommend this foam cannon to anyone looking for an efficient and effective way to wash their car.

Buyer's Guide

Car Wash Cannons are powerful, versatile tools designed to tackle various car cleaning tasks with ease. They provide an efficient and convenient way to clean cars, whether it's for personal use or a professional car wash service. In this guide, we will discuss various important factors to consider when purchasing a Car Wash Cannon to ensure you make the right choice.

Water Pressure

https://preview.redd.it/u0pzthlnxb1d1.jpg?width=720&format=pjpg&auto=webp&s=16311f8d593b007051bb97240927596b97d3c640
Water pressure is a critical factor when choosing a Car Wash Cannon. Ensure that the device you select can handle the required pressure for your specific application. Water pressure requirements may vary depending on the type of cleaning task, such as washing vehicle interiors, exteriors, or removing stubborn dirt and stains.

Versatility

Consider the versatility of the Car Wash Cannon. Look for devices that come with multiple attachments, such as different nozzles, extensions, and brushes. This will allow you to tackle various cleaning tasks with ease without needing separate tools for each job. Versatile Car Wash Cannons can save you time and money in the long run.

Durability and Build Quality

Car Wash Cannons should be built to withstand regular use and harsh cleaning conditions. Look for devices made from high-quality materials, such as stainless steel or industrial-grade plastics. Inspect the build quality and construction of the Cannon to ensure that it can handle the wear and tear that comes with consistent use.

https://preview.redd.it/sgwlqvxnxb1d1.jpg?width=720&format=pjpg&auto=webp&s=b722717ee61e8360766a1251bf56d17117ca61fa

Power Source

Car Wash Cannons can be powered by electricity, compressed air, or a combination of both. Each power source has its advantages and disadvantages. Electric car wash cannons are generally more powerful and easier to use, while compressed air cannons are more suited for specific applications. Consider the type of car washing tasks you need to perform and choose a power source that best fits your requirements.

Noise Levels

Noise levels are an essential consideration when selecting a Car Wash Cannon, especially if you plan to use it in a residential area or close to living spaces. Look for devices with lower noise levels to minimize disruption to your surroundings.

Maintenance and Cleaning

https://preview.redd.it/xxrkq7goxb1d1.jpg?width=720&format=pjpg&auto=webp&s=f80a7218db35f5099ba7cd8fa6fe8cf690171692
Proper maintenance and cleaning of your Car Wash Cannon are crucial to ensure its longevity and optimal performance. Choose devices with replaceable or repairable parts to make it easier to maintain and clean. Additionally, follow the manufacturer's advice on maintenance and cleaning procedures to keep your Car Wash Cannon in top condition.

Price and Value

Finally, consider the price and value of the Car Wash Cannon you are interested in purchasing. Higher-priced models may offer advanced features and better performance, but this doesn't always mean they are the best choice for your needs. Evaluate the cost-benefit ratio of the device and choose one that offers the best value for your money.
By keeping these factors in mind, you'll be better equipped to make an informed decision when selecting a Car Wash Cannon that suits your car cleaning needs and expectations.

FAQ

https://preview.redd.it/dztawiroxb1d1.jpg?width=720&format=pjpg&auto=webp&s=2074a0dd1318abbe5b290aeadd191e0fa0bef4a2

What are Car Wash Cannons?

Car Wash Cannons are high-powered, industrial-strength car wash systems designed for use at commercial car washes. These machines are capable of washing an entire vehicle at once and are perfect for high-volume car wash operations.

How do Car Wash Cannons work?

Car Wash Cannons use a combination of hot water, high-pressure cleaning jets, and specialized cleaning solutions to wash a vehicle. The process typically involves a pre-soak, foaming, and rinsing stage, followed by a high-pressure wash to remove dirt and grime. Finally, the vehicle is polished and waxed to give it a shiny finish.

Are Car Wash Cannons easy to operate?

While Car Wash Cannons are designed to be user-friendly, it is essential to receive proper training from the manufacturer or a certified technician. This will ensure that you are aware of all safety procedures and maintenance requirements to operate the machine efficiently.

What are the benefits of using a Car Wash Cannon?

Reduced washing time, making it ideal for high-volume car wash operations
High-pressure cleaning jets can remove even the toughest dirt and grime
Special cleaning solutions and pre-soak can help to lift and break down dirt, making it easier to remove
An automated system can help to reduce the risk of human error and improve the overall quality of the wash

How much do Car Wash Cannons cost?

The cost of a Car Wash Cannon can vary significantly depending on several factors, including the size of the machine, the features it includes, and the manufacturer. It is best to contact the manufacturer directly or consult a reputable dealer for an accurate price quote.

What maintenance is required for a Car Wash Cannon?

Regular maintenance is essential to ensure that your Car Wash Cannon operates efficiently and safely. This may include cleaning filters, replacing worn parts, and inspecting the entire system for any potential issues. It is recommended to follow the manufacturer's maintenance schedule and consult a certified technician for any necessary repairs.
As an Amazon™ Associate, we earn from qualifying purchases.

submitted by GhoulGriin to u/GhoulGriin [link] [comments]

2024.05.19 08:45 miasmic Thoughts on Bose Acoustimass subwoofers?

I have one from circa 2000 I got cheap ($30) and not sure if it is not working properly or they are just overrated and interested in others opinions.
The one I have was part of the Bose safety recall https://www.cpsc.gov/Recalls/2023/Bose-Recalls-Acoustimass-Lifestyle-and-Companion-Bass-Modules-Due-to-Fire-Hazard, and Bose accepted the recall but in my country they aren't providing shipping labels and it would be relatively expensive (more than I paid for the sub) to send it to the only service centre here.
It's been sitting around in the garage for months and need to decide what to do with it, I could salvage it for the drivers and parts from the amp if I'm not going to send it for service. I don't even know what the Bose service involves, like if they just swap out one capacitor or something and it's on it's last legs apart from that it'd be a waste of money for sure, if they install a whole brand new amplifier unit maybe not.

submitted by miasmic to BudgetAudiophile [link] [comments]

2024.05.19 08:35 Heroman3003 Taking Care of Broken Birds [Part 3]

More misery bird? More misery bird. Really miserymaxxing with these fics I have going, but hey, this one is not that miserable actually! Krekos is back and ready to be dense and downcast, but maybe not quite miserable? Read and see!
Big thank you to NoP community for being great and supportive of my endeavors!
Also, obviously, big thanks to SpacePaladin15 for creating this universe and allowing fanfiction well to flow free!
[First] - [Prev] - [Next]
Memory transcription subject: Krekos, Krakotl Refugee
Date [standardized human time]: May 6th, 2137
I stare at the foul creature before me. Normally staring at something directly head on like that would be too predatory for me to do, but after nearly dying of bread yesterday, I didn’t feel patient enough to be gentle. The creature stared right back, though in a much more natural, prey-like way, tilting its head slightly as it looked back at me with one eye and let out a long bwok.
“Are you doing this now? Really?”, I ask, knowing full well it cannot respond.
Well, it can, if another bwok it made is any indication. Of course, translators aren’t yet advanced enough to translate non-sapient speech, but the intention behind sound is intuitively clear. It’s telling me to back off. Well, I tried the diplomatic approach at least.
Raising my wing I begin sliding the bird out of its nest, careful to keep any delicate joints out of its reach. It started clucking in upset indignation, struggling back and even trying to peck at me, but after realizing that I will not relent, it hopped out of the box and rushed out of the cattle house, revealing a single dead egg in the nesting box.
With relief, I finally pick up the last egg and head back to leave them at the house. Turns out that while Reginald didn’t forget to both lock them up yesterday and let them out today, he did neglect feeding them both times, as well as collecting the harvest. So when I was driven back here in early morning, the first thing I did was making sure they were taken care of. I can’t say the horrid birds looked in any way hungry, but the moment I poured the feeding grain for them, they attacked it with more viciousness than I’d expect of an actual predator. And yet only thirteen were present at the feeding, as the one that’s usually the target of flock’s ire remained in the cattle house yet again, Reginald leaving it to it, being unaware of its undesirable habit of trying to hatch dead eggs.
With eggs delivered, I flew my way to my usual spot atop the cattle house and could finally relax. The loner beast first made its way to feast on the scraps of the grain that other birds already all have had their fill of, so I wasn’t too concerned. Instead I tried to reflect on the morning I had so far.
Waking up at the hospital did make me momentarily panic before I remembered the precluding events. Not that I could properly panic, feeling the most starved I’ve been my whole life, and too weak to try flying out of the window. Thankfully, the breakfast they provided was actually well made with krakotl needs in mind, algae soup alongside a few slices of bread, this time without any horrid human ideas like putting eggs in there. Eggs! Turns out they put eggs in some kinds of bread! That’s how I got sick! Eggs! The thought of what I consumed even now made me queasy, and it definitely made breakfast a much less appetizing affair than it would have been without that knowledge, but back then the hunger won over the disgust.
Lena did keep her promise and came to pick me up extra early. Her being a staff member at the hospital gave her some extra privilege, I assume, hence why I was released without any forms needing to be filled out personally. She did have important business today too, which probably explained the earlyness and urgency of her driving me back to her house.
That did not mean I escaped her ire, however. While I couldn’t pinpoint anything to identify the man, as Bob was apparently a common name, that offered me bread, we did come to understanding that he was likely either unaware of the nutritional contents of it, or of extent to which the Cure-induced allergy would be affecting a krakotl. Yet, Lena seemed much angrier at me for failing to take any precautions. Turns out that was the purpose of medicinal injectors, epipens as humans call them, that were provided to me. I was supposed to have them on me in case I accidentally ingested contaminated food. Nobody told me that, I was just handed them back when I first received the necessities at the refugee camp and I had no clue what they were for. Then she also berated me for eating random food from strangers and ignoring bad flavors. Turns out that brioche bread isn’t actually bitter at all, and that was my body reacting to an allergen in it. Reaction that I unwisely elected to ignore, to further ire of my host. By the end, several new rules of my stay here were made, including not eating things I don’t know and always having at least one epipen on me. Thankfully, these rules would be ones I’d start following even without them being established, so I won’t have to concern myself with being kicked out over accidentally breaking them.
~~As if following the rules will be enough to make them like you.~~
Trying to distract myself from thoughts of yesterday’s incident, I focused my attention on the flock. All birds accounted for, so at least I knew that my absence did not result in the predator coming to snatch one of them. I do not wish to insult my hosts, but Reginald is far from most attentive people in matters unrelated to his job, and I am not sure the birds were watched at all while I was out. Speaking of, my scannings of surrounding treelines revealed no sign of the predator today. Perhaps it departed to hunt elsewhere, or maybe it ventured too close to a more populated area and exterminators dealt with it.
Actually, did human exterminators work similar to Federation ones? I knew for a fact they had them, although they seemed like a market of private organizations if advertisements are anything to judge by. Still, what methods do they use? I know humans oppose fire, and do not believe in predatory taint, but surely they have measures to protect themselves? They are, by self-admission, far from the best natural predator, and I doubt Earth’s non-sapient predators would just leave humans be. Maybe I should call one of those human exterminator agencies and call them in to deal with that predator? I haven’t told Lena or Reginald about it, as I didn’t want to bother them, but it could pose a serious threat to the cattle, but maybe that’s the way I could resolve it without involving them?
I have not done nearly as much research into human culture and lifestyle as I should have, considering that I’ve lived on Earth for over half a year now, but the sheer width of the topic always overwhelmed me the moment I opened internet search app to the point where I just closed it right away.
~~And you expect to start studying again with that attitude? You’ll flunk out even from this primitive predator education course.~~
Extra loud call from the flock made me refocus my attention on them, but it was nothing. Just the loner getting pecked extra hard and lashing out against assailants, causing a small aimless stampede as all the birds ran around in circles, puffing up at one another. The assailants now looked a lot more like victims. I could understand those birds more than I could humans at least. The loner bird is clearly an odd one out. It’s the only one repeatedly trying to hatch unfertilized eggs it lays, and it seems to always avoid the rest of the flock. Humans may deny the existence of Predator Disease, but they can’t deny that prey and predator both can and will sometimes behave in unnatural ways that may threaten the herd's safety. Or pack’s, in case of humans. Birds must know on instinctual level that the loner’s behavior is unnatural and are attempting to combat the Predator Disease on instinctual level. And since that is natural, I still will not interfere in this, unless the loner bird actually becomes a threat to others or will start getting too injured. The first time I attempted to pick one of the birds up was the only time for a good reason, as I have learned their viciousness all too well.
DING-DING
The sudden loud ring startled me enough that I nearly tumbled off the roof. Who would be coming over now? Lena and Reginald have left together and shouldn’t be back until afternoon, and they’d never use the bell. That means someone must be here for them. But wouldn’t they warn anyone to not come over? Especially with their plans for today.
With nobody to answer these questions, I had no choice but to go and discover the answer myself, flying up and over the house, towards the entrance gate. The moment I passed the house roof, I already saw a familiar silhouette. It was the human child from a few days ago.
Thankfully, Lena’s insistence on me carrying an epipen at all times meant I also carried my satchel at all times too, so I didn’t have to go grabbing my holopad, and took it out. But before I could even launch the translator TTS app to type out a greeting, the child was already hopping in place with excitement.
“Mr. Krekos! Hi! I came over to visit!”, she exclaimed, showing off her teeth in an unnerving expression of human joy. I simply tried to avoid that and focused on the pad, typing out my response.
“Hello, Rosie. Why are you here?”
The question was genuine, as the child was not carrying any more of that honey substance from last time.
“I just came over to visit you! Is that okay? Are Mr. and Ms. Vince okay with it?”
Visit... me? Why? While I was confused, I did instinctively type out a reply.
“They did tell me visitors are allowed as long as there’s no trouble when I first moved in.”
And before I could type a followup message asking her why she’s here, she already let out a joyous roar and ran past me.
“Can I see the chickens?”, she asked, and not waiting for an answer, rushed past the house and towards the cattle yard.
“Wait! You’ll scare them!”, I yell after her, but of course without a translator she can’t understand me as she runs like she already knows where to go.
And indeed she has, quickly rushing up to the open field where the birds were grazing. Thankfully she didn’t start chasing them, instead just approaching the flock from a distance and swaying in place, watching them with what I assume was some sort of predatory excitement at the sight of prey. Maybe that’s where the contained hunting instinct of human children showed themselves? In chasing small birds? I was still more subdued, considering she stopped shy of causing a small stampede, but still.
“Grandpa used to take me with him! He helped watch this farm until Mr. and Ms. Vince moved in. I like chickens! I think they’re cute.”, the child told me innocently as she kept swaying and watching as the beasts grazed upon insects of the pasture.
That revelation was... interesting. I suppose it makes sense that between the original owner of this land dying in the bombings and Lena and Reginald moving in, it would be unattended. With nobody to feed and watch over those things, they would be long dead for sure. And it was Rosie’s grandfather... Speaking of. I typed out my words.
“Does your grandfather know you’re here?”
She seemed to get a weird look as she stopped her excited swaying, fiddling with her hands instead. Looks like I asked the correct question.
“...he knows I am out visiting neighbors.”
That did not answer my question. I squinted at the human child, and she dipped her head as she continued.
“...he doesn’t know I’m here specifically. Or that an alien even lives here...”, she explained, her tone suddenly more sullen.
I couldn’t help but squint at that, and it appears that my expression was readable enough that even a human could see the suspicion, as she continued.
“I’m sorry... But if I told grandpa, he’d tell me I’m forbidden from talking to you, like he forbade me from talking to hedgehog people in town... But I want to talk to you! You’re nice and you’re a space bird!”
The child was actually working around the rules established by her guardian to come see me. I don’t know if I should be glad or concerned. Clearly, the man is anti-alien in his opinions, and I’d rather that kind of man not know about how close he lives to one. At the same time, I’d rather not encourage a child for lying to their guardian in order to meet a stranger they know they aren’t allowed to interact with... So I just took the middle path with my next message.
“I see. What did you want to talk to me about then?”, TTS speaks for me.
Her stiffened body language disappears, replaced again with earlier excitement.
“I wanna know more about space! And aliens! It’s all so cool but grandpa says it’s all dangerous because mom and dad died. But it’s not! The hedgehog people were nice, and you’re nice too!”
I wasn’t sure about that logic, but my self-preservation told me I shouldn’t try convincing her to go confessing. Instead I focused more on her chosen topic.
“I am not sure I am the best person to ask about space. I am not a scientist or traveler.”
“But you’re from there! You know way more than me. I don’t even know what you are called. And there’s gotta be cool things out in space!”
I let out a sigh. I suppose it’s childlike curiosity at its finest. So unfamiliar with mundane that it is a wonder. I remember being like that about becoming a doctor.
~~And then you let your teacher die.~~
I quickly tapped on the pad.
“Okay, I can answer questions, but I may not know everything.”
The noise that came out of the girl was like a squeal of a panicked dossur as she started hopping and spinning in place.
“Yes! Yes! Thank you, Mr. Krekos!” Sudden movement did cause me to recoil a bit, which in turn caused her to cease her happy flailing and adjust her little dress. “I dunno where to start though... Hm... What are you?”
...for all my trepidation about not knowing answers, I should have anticipated that the questions she asks will be rather age-appropriate and on the same level as we learn in our first school classes. At least I won’t disappoint her then.
“I am from a species called ‘krakotl’. We’re avians, as is obvious. Our home is...” ~~dead, gone, reduced to glass and ash by our own hubris~~ “...was Nishtal. A beautiful planet...”
Thankfully she did not question my hesitant pause. Instead she just nodded along.
“What about the hedgehog people? I already know venlil, but they’re the only ones I know name of.”
Hedgehog people in town she mentioned earlier. The only species I could think of that could be seen there would be the gojid. I have no clue what hedgehogs are, but probably some creature with visible similarity to them.
“They are called ‘gojid’, and they’re from gojid Cradle. Both of our species are... well, used to be known for our might and protecting other species of Federation.”
I am not sure if that’s something to brag about, considering... everything. But I didn’t want this child to get brought down with depressing regrets of our species. Let her know something nicer instead. She clearly lost a lot, but there’s still joy left in her. I wouldn’t want to be the one to ruin that.
“Cool! What about other people? I wanna know more!”
And so I went on, telling her about various species, although I mostly focused on ones in this new human-led union, only mentioning kolshians and farsul beyond that. It’s weird explaining to a child what a tilfish or a harchen looks like, but thankfully my holopad isn’t just a method of communicating with implant-less children. With access to interstellar web, I could easily pull up pictures of various alien species to show to her, even if she struggled to believe that some of them were even sapient purely based off of looks. With how varied species in Federation are, and how some of us admittedly aren’t too far physiologically from our more primal ancestors.
Among other topics, she asked me to tell her interesting things, which I didn’t know much of. I told her about Venlil Prime’s tidally locked status, a rarity among habitable planets, much less homeworlds for species. I told her about the unique architecture of Mileau, designed to accommodate both species of regular size and dossur themselves. I told her about Colia medical academies, some of the most beautiful medical facilities in the galaxy.
I wish I was more well-travelled, but I just wasn’t. My whole life, I never left Nishtal until the extermination fleet took me despite my protests. That may have been what saved my life...
~~Not that I, of all people, deserved it...~~
“Hey! Stop that!”
I flinched as I heard the child yell, but quickly realized that it wasn’t directed at me. Instead, Rosie was rushing down towards the chicken flock, breaking up the fight in which the loner was being pecked by a few larger chickens. As the human child approached, the birds stopped their infighting and scattered in different directions, crowing in loud panic and discontent. On instinct, I found myself rushing towards the child, forgetting about translation entirely.
“What are you doing?! Don’t touch them!”
I didn’t want her to hurt the cattle accidentally, and I didn’t want her to get hurt by the angry birds in return. But, it seems like the moment the birds scattered, she was satisfied with her actions and turned back to me, wearing another one of her happy smiles.
“Sorry, Mr. Krekos, I just saw chickens being mean. Bad chickens.” She explained.
I was baffled. Why would she interfere like that? When I tried that back when I was just starting, that got me pecked! But with her, the birds just scattered. What if they pecked her?
I took the pad out again and started typing quickly.
“That was dangerous. Why did you do that? What if they attacked you? Why are you even interfering in their natural dynamics?”, questions flowed out of my pad with an artificial human voice.
The girl simply giggled.
“They’re chickens! They aren’t dangerous. They don’t peck that painful and I’ve been scratched worse before. And I have to stop it because bullying is wrong.”
Then she actually noticed that the one that was being attacked wandered close. She casually approached it from behind, the blind spot and just reached down and grabbed it, picking the bird up. I was ready to rush to help the bird when...
“Mwah! There, all better.”
She did a human ‘kiss’ on the back of the cattle bird’s neck before releasing it, the surprise of it causing it to rush off. I knew what kisses were, I’ve seen enough of them between Lena and Reginald, but I believed they were gestures of intimate affection, not... what was even that?
It seems Rosie noticed my confusion as she explained.
“You gotta kiss it so it heals better! That’s what mom taught me.” The child displayed that smile of hers shamelessly. With how much I was being exposed to it, it almost wasn’t unnerving anymore. Still, it was interesting to learn that kisses are seen as something that helps wounds. I guess some species do have saliva with mild antiseptic properties, wouldn’t be too out there to assume humans are the same. And if that’s the case, maybe that’s how the kissing tradition started? Exchange of protective fluid between lovers?
“I see. I did not know that.” I responded before letting my puffed feathers relax. Okay, this whole ‘watching a human child’ thing is turning out to somehow be even more stressful than I expected at first.
“Wait, Mr. Krekos, what time is it?” She suddenly asked, looking up at the sky.
“It’s nearly twelve.” I respond, holopad having a convenient clock for local time.
“Oh no! I need to be home soon! Was nice seeing you Mr. Krekos gotta go bye!”
Before I had even a chance at typing out an answer or my own goodbye, the child sprinted away and back towards the entrance. I had to take flight just to keep up, and even then she just turned around, waved her arm at me and then kept sprinting down the road after leaving the gate. I simply offered a small wave of a wing back before locking the gate again. I suppose it is hard to keep track of time without a device or clock nearby...
Well, at least I had the usual peace and quiet now. And learned a bit more about the creatures I was in charge of. I should really try to deal with my aversion to looking things up on the human internet...
Just as I was about to head back out towards the yard, I heard a loud car horn, a familiar one, getting my attention. Lena’s car. There they were, signaling me, probably having spotted me at the gate from afar. Deciding to make use of my presence here, and hoping to avoid needing to explain that I had a surprise visitor earlier, I went ahead and opened the large gate, allowing the car to enter.
Once it was parked in the usual space, the doors opened and three people came out. Lena and Reginald were both looking a bit disheveled, but their faces carried these smiles that seemed wider than ever before. And third person... Was a stranger. A human I knew of, but never actually met. As he exited the car, a large bag in one hand, he just stared at me, standing in the front yard...
“...okay, I expected many things when I was told you guys housed a refugee, but not this.”
Oh no. Oh no, he was not one of the ones that was willing to overlook an invader that partook in bombing of his planet being allowed to walk free, of course, Lena and Reginald were the weird ones like that, doesn’t mean their son won’t be... I felt the panic rising as I realized I’d need to return to the camp. Why was I upset about that? This was supposed to just have been a way to make money, but now I have a free education program. Do I need to stay? No, but... Why?! Why do I not want to leave?
“Ken, you said it’s going to be alright no matter what it is, right? Wanted us to keep it a surprise to meet a new friend?” Lena’s voice. She should have told him, that’d give me time to prepare why didn’t they give me time why.
“No, no problems, just, really surprised, that’s all... uh... hey, buddy, you okay? You’re really... trembly.”
He was approaching me, and instinct took over as I recoiled, before stuttering out my answer.
“I-I’m fine...”
...thankfully translators don’t translate voice cracks. I hope, at least...
“Hey, relax... I have no problem with you being a krakotl, I just didn’t think...” He looks over at Lena and Reginald. “Calm down... I can wear my visor if you want?”
Right. Those things humans use to hide their scary faces from us.
“I... I’m good...”
~~Why would it last? It almost felt good after all.~~
There was some emotion I struggled to read on the young human’s face, as he sighed and shook his head.
“I screwed this up, I’m sorry. Let... Let me try again.” He straightened out, and adjusted his clothing, before slowly approaching me and giving me a small smile, no teeth showing. “Hello. My name is Kenneth Vince and I'm son of Lena and Reginald Vince. I was told you’re a refugee they took in to help out. It’s nice to meet you. What’s your name?”
That... snapped me out of it. Right... He was... not upset at my existence. He was just very surprised that Lena and Reginald weren’t. That’s a reasonable thing to be surprised about, considering I was surprised about it to this day. I tried to compose myself as I responded.
“My name is Krekos. I live here as... hired help with the cattle. It’s... nice to meet you?”
The smile on Kenneth’s face widens, though he still refrains from showing his teeth. Instead, he extends a hand towards me. A handshake is a human gesture that I found far from comfortable, but I didn’t want to give him a reason to change his mind on acceptability of my existence, so I took it with a wingclaw. He gently took it and held for a few seconds before letting go and sighing again, turning to his parents.
“You know, I always thought you guys would be empty nesters, but I never thought it’d be that literal.”
That got all three of them laughing, as I just tilted my head in confusion. I was fairly sure there were no empty nests in the house until after I adjusted the attic room for my own accommodations. Still, I took the laughter as a sign that the tense moment had fully passed and let my ruffled feathers slowly rest.
“Let’s head inside. Krekos, we’re having dinner, you’re welcome to join us.” Reginald said, picking up Kenneth’s bag. I tilted my head a little and he followed up with elaboration. “We will be having meat... But there’s still going to be stuff you can eat too. It’s a celebration, so I prepared a bit of everything.”
“Dad, you shouldn’t have!” Kenneth responded with embarrassment.
“None of that! Our son returned from the war, alive and a hero, and we can have a celebration. Krekos, I know you’re still... uncertain about meat so you don’t—”
“I’ll join.”
Wait, who said that? And why did they say that in my voice?
Wait, that was me. Why did I say that?
“That’s great to hear! I’ve got some nice steamed broccoli and some vegetarian fried rice as sides that you’ll enjoy!” Reginald smiled at me and I felt myself shrinking into my feathers. That the humans didn’t notice at least, proceeding into the house instead.
Well, looks like I signed my warrant. At least my bag and my epipen were on me in case something at the table triggers the allergy again. Would be rather unfortunate to have it happen two days in a row.
And that’s how, in just ten or so minutes, I found myself sitting at the dining perch, while humans took seats in chairs, all consuming chunks of roasted flesh and somehow managing to also stuff pieces of equally roasted plants in, and converse with one another. You wouldn’t be able to tell on first look, but despite their mouths being relatively small, especially for a predator, it seems they compensate for it by having those be near bottomless in both hunger and small talk.
I am not sure how I managed to shift my focus away from them consuming animal matter in front of me, however vat grown it might have been, and onto their conversation instead, but I succeeded. I suppose that was just part of me going native around predators. Soon, I’ll be the one feasting along with them before I know it, and snacking on those epipens to not die of it.
~~Like you could ever be on the same level as humans.~~
“So, Fahl? That’s where you were sent after the Battle of Earth?” Lena asked.
“Yeah. From what I heard, we got a light posting compared to guys at Sillis or Mileau. The most I had to deal with was some exterminator insurgents.”
That’s right. Since harchen participated in the Extermination Fleet, they were one of those who were occupied by humans during the war. It makes sense that there was at least some ground resistance.
“Honestly, the worst thing out there was the heat. Not the flamethrower kind, the climate. The place was so damn dry and hot. At least exterminators you could subdue or evade. Not so much with the scorching sun!”
I couldn’t resist a small chuckle at the idea of a predator being more afraid of hot weather than flamethrowers as I slowly pecked at the vegetables on my plate. Thankfully it was set far enough aside from any meat dishes that no contamination should occur, but I was still examining pieces before putting them in my mouth just in case.
Seems like reacting was a mistake though, as that brought Kenneth’s attention onto me. He finished chewing latest piece of flesh and pointed a fork at me.
“So, Krekos... Where are you from? Cradle was my guess, but I do know there were refugees from other places like Sillis too.”
That’s a weird question. Isn’t it kind of to be expected for a krakotl to be from our actual homeworld?”
“I’m from Nishtal.”
“No, no, that’s not what I meant,” Kenneth chuckled, tossing a piece of broccoli into his mouth and swallowing before continuing, “I meant, where did you live? I kind of assumed you were born there, but it’s not like Nishtal had a chance to send refugees out, and if they did, this is the last place they’d be.”
Oh... I caught concerned looks of Lena and Reginald, looking between me and Kenneth from both sides. Not only did they not make him aware that I was a krakotl, they also neglected to mention just how I came by my refugee status... Which was just a legal workaround to grant me asylum without unnecessary complications or establishing undesirable precedent. Legally, I may be a refugee, but practically... I am a defector. Lena and Reginald know that, I told them my story before. And while they were weirdly accepting, Kenneth... Fought extermination fleet here on Earth. Personally.
Still, I wasn’t about to lie. It took a few moments and gathering mental strength to steel myself, and averting my eyes, focusing on the plate of warm vegetables in front of me rather than the human’s anticipating stare before I answered.
“I did live on Nishtal. I... I came with the extermination fleet.” I responded, doing my best to avoid looking at him. I did not want to witness his reaction, for some reason the thought of seeing it weighed heavy on my mind.
“Oh.”
The response was simple, and had no followup. There was no more clinking of cutlery against plates, or chewing. The only thing hanging in the air of the kitchen was silence, weighing down on me. It dragged on and on... until it just got so unbearable I couldn’t take it.
“I-I’m full... Thank you for the meal.” I quickly said, hopping off the perch and stepping out of the kitchen, quickly making my way to the yard and taking flight.
Fresh air of the outside and rush of it as I flew up and gained speed... I missed that. I knew it’s not safe to just fly over other people’s territory, so I corrected my course into doing large sweeping circles over the cattle yard and simply let my wings carry me.
~~Flying away from any danger is the only thing I’m good for anyway. The only thing I ever do.~~
I closed my eyes. With them closed and not focusing on my angle it feels like I’m actually flying away from all the troubles. Away from humans who barely tolerate my existence, away from gojid who see me as worse than a predator, away from Earth and all its incorrigible customs, away from horrid cattle, away from constant memories...
Flying feels nice. It may be a bit harder than it was home, but it’s still possible. I heard that on Venlil Prime or Mileau it’s much harder. But here? Just an extra flap of wings for every few paces and you’re just fine, free to soar the skies...
~~Alone. With no one to ever share it with me again.~~
Slowly I let my eyes open back to the bleak reality. Greenery of surrounding pastures and woods, bright blue skies and farmhouses dotted about here and there greeted me. I lowered my gaze down, focusing on what’s below. There they were, fourteen brown and black dots spread around the enclosed portion of the farm territory. I am not sure how much time I’ve spent flying in circles and trying to forget things but my wings were feeling a tad sore. Then as I just began slow descent, in same circular motion, I noticed that one of the birds, a familiar one, was being chased by several others. Recounting the morning, I tried putting the knowledge to action, and shifted direction of descent, swooping down. To my surprise, that actually worked, as the moment I got close to the ground, the cattle birds all got much louder and scattered in all directions, including the loner. Who, at least this time, got off unharmed. I suppose such pathetic flightless creatures would fear a flying one much more than they would when I just run up to them...
~~Swooping at them from the sky like a predator to intimidate them into behaving... Like an arxur warden.~~
With the fight preemptively broken up, I flutter up to the roof of the cattle house, to my usual position and rested my wings. I didn’t see any movement from the direction of the house, so I suppose the family is still busy unpacking. Since Kenneth joined the military just before the Battle of Earth, and Lena and Reginald only moved here after their actual house in city of New York got destroyed, it’d be the first time the human is seeing what is basically his new home. There was a room set aside for him since before I even moved in, and while there is also a guest room... That one did not have a large enough window to fit through, which did not feel comfortable. So when I asked for a space with a bigger window they only had an attic to offer. They seemed uncomfortable letting me live in a tiny room with slanted roof, but I found such space more comforting than I would have a large room with a window not large enough to fit even one fully spread wing through.
I wonder if Kenneth will need as much renovation as I did? The house is built for humans, but he never lived there before. Will he need to buy a more comfortable bed? Getting a proper nesting setup in place of a bed took a bit of effort, but I figured something out. Human sheets were comfortable enough for such, and sitting perches were thankfully not that hard to get thanks to help from the refugee administration. Maybe that’s the things that Lena went to buy yesterday? Kenneth’s preferred room decor?
I looked up to the sky to see the sun beginning to dim. I am not sure if it was me flying that long, or me losing track of time in my thoughts again, but the sun was beginning to set. I began my usual chores, putting out an evening meal and water for the beasts, and while they feasted, ate some myself. I was a bit hungry, having not properly finished lunch and about to skip dinner, but after the earlier conversation, I’d really rather avoid giving them the opportunity to talk to me.
After the birds had their fill, and by that I mean they emptied the tray as they always do, I let out the call, and they started funneling into the cattle house. The lonely straggler being first to go and hop into its nesting box. I bet tomorrow I will have trouble with getting her out of there again...
I took the moment to gather some eggs the birds left over course of the day, and once that was over and all of them were accounted for, I closed it up. When I flew down over to the house, there wasn’t anyone by the back door thankfully, so I just left eggs there, returned the basket, and returned to my room through the window.
Well, at least I didn’t get nearly killed today... That’s nice I guess?
I was about to check my holopad when there was a knock on the door. I approached and opened it to see... Kenneth. Standing in the doorway.
“Uh, hi, Krekos. I just, uh... Wanted to apologize again. I really wish mom and dad told me everything ahead of time... I just want you to know, I have no problems with you whatsoever, yeah? It’s just. Surprising, I guess, to hear all that. I didn’t think there were any defectors from the fleet at all... Just. Uh, please don’t worry about me?” He offered me a small smile, showing his canines before quickly correcting himself and doing a closed-lip one. “I didn’t mean to bring up bad memories or make you feel unwelcome.”
I had to take a moment to contemplate his words. Was Lena and Reginald’s weirdness hereditary? He almost reminded me of how Reginald talked to me early on, with constant stumbling over the words, as well as constant reassurances that he is fine with me being here. Couple that with failing to avoid predatory mannerisms like eye contact and smiles like Lena tends to and you get this human. But most importantly and least understandably, there was the general fact of him and them just... welcoming me. I couldn’t understand why. I should be one sorry to them.
“N-No, it’s fine... I’m sorry for... intruding on you and your family.”
“No, no, dude, you’re fine! I mean, hell, I was considering entering one of those exchange programs before the bombings happened, and even after, well, I did my best at Fahl to be the perfect friendly soldier just there to make sure no more bombs drop on my home and not kill or conquer anyone. And then mom told me your story, and I can’t believe it... Just... If you have any issues, feel free to tell me. I’m not one of those racist pricks that are too pussy to even call themselves HF anymore because they know they’ll get their teeth knocked. I get that there aren't good or bad species, just people. And you seem like a decent guy if mom and dad’s judgment is to be trusted.” His smile widened, though it was clear from tension on his face that he had to take conscious effort to keep teeth hidden. “So, what I said earlier stands. Friends, right?”
He extends hand forward, for a second time today. I wasn’t sure if I knew this human long enough to call him a friend... Any human really. But it also seems like human definition of ‘friends’ is anyone they’re cordial and peaceful with. Which is weird. You’d think translators would properly use ‘acquaintance’ for that.
Still... We will be living in the same house now. I can’t just say no, and... I can’t come up with a reason to say no. Even him being a predator and a human is not something I could really say I object to, considering how... mundane that became to me over my time here.
So, with naught on my mind but acceptance of the situation, I extended my wing and grasped his hand with my claw. This time he actually gripped it tightly and moved it up and down, as I saw other humans do occasionally.
“Yeah... I guess that’d be for the best.” I responded, shrugging off the hesitation. Fresh start for a third time, I guess?
The human grinned, forgetting to hide his teeth entirely, but I was ready for it somehow and avoided outwardly reacting.
“Cool! Anyway, I’ll try to get some shuteye early, I couldn’t sleep on the overnight flight home. See ya!”
And with that he left. Well... That meeting went well I suppose?
I returned to my nest and picked up my holopad, returning to what I was doing. And there it was, something I awaited every day. A notification that I was messaged on mailing app. Opening the letter revealed the schedule for the study program. Which... only had one day marked on it. And a note that the rest of it will be figured out ‘as we go from there’. So it’s not a schedule, it’s just a mark for the day of the first meeting.
While a bit underwhelming, it was still exciting. It would be an all-alien class so I wouldn’t have to deal with humans’ incomprehensibility nearly as much, and it would allow me to finally return to pursuing what I actually dreamt of. Even if I wasn’t entirely sure that was precisely what I wanted after everything that happened, it was at least something for me to move towards.
...just two days until start. I wonder if there’s some required reading to prepare?
[First] - [Prev] - [Next]

submitted by Heroman3003 to NatureofPredators [link] [comments]

2024.05.19 08:34 Sevenvoiddrills Favourite region art?

I'm taking about the art on the region map screen (the one you get to from the title screen labeled "regions")
Honestly I think farm arrays is my favourite just because of how much it reminds you of the amount of land these regions take up and it's absolutely beautiful with the plants and alien wheat.

submitted by Sevenvoiddrills to rainworld [link] [comments]

2024.05.19 08:31 hgilbert_01 Inquiring about Enneagram 2, Especially as a Tritype Fix

Hi.
So, to be straightforward, I am most likely not Enneagram 2, my reason for posting here seeking to learn more about Enneagram 2 and see if I relate to it some capacity; I’m hoping my post isn’t an intrusion and I hope I can receive some help, please. I know Tritype isn’t for everyone, which is ok— I am currently trying to gauge my most likely last-positioned Heart Type Fix in my Tritype (being more securely settled in my first two: 96X). The approach I would like to take with this is to make a list of factors I feel make me lean towards 2, in addition to things I am conflicted over.
Things I Feel Orient Me Towards 2

I know that “kindness” and “friendliness” are not necessarily identifiers of Type 2, but I feel a compulsion towards being kind and friendly and the absence of those traits would make a monster, especially in the perspectives of others.
Using my brother as an example at a younger age; I concede this was born out of jealous resentment of the attention he was receiving, because of it (so much so to essentially stealing my friends, albeit not with ill will on his part), but I disliked my brother for being more demonstrative about his negative emotions as a means to gain attention from others, whereas I tried to earn people’s favor through “good means”, such as by being helpful, kind politeness.
I admit that my self-worth tends to come from others in some capacity— some Core Type 9s have expressed that simply being perceived as “nice” or “friendly” has felt… …demeaning to them, for lack of a better term, but when people compliment me on being kind, it feels reassuring.
When I was younger and in my immediate family dynamic, when my brother or father were going through emotionally challenging times, it felt like I had to be the “strong, optimistic” one— I should emphasize that I experience discomfort with intimate, emotional expressions of support/love, but it still felt like I had to be verbally reaffirming (example: despite previously written resentment of my brother, I was always very protective over him).
I most likely have some form of OCD (bear with me, please, not saying OCD points to 2); this manifested in a phase in which I felt I had to be as helpful and kind to people as possible, always anticipatory of their emotional needs, but this continued to dig a gaping hole in my personal security as I just burnt myself out trying to be anticipatory like this.

Things I’m Conflicted Over

So, I consider myself to be an emotionally fragile and insecure person, very easily hurt by disharmony, tension, aggression, criticism (more than likely a result of mental health factors)… …yes, I want to say I may identify with said fragility, but the manner in which I may seek to be seen for it may be more in a Type 6 sense of “handle with care shipping label”; I want people to have my vulnerabilities in mind so that I may not be unknowingly abused (as opposed to 4 being seen for their inherent flaws as part of their image, if I understand correctly.
I stress the importance to myself and try to encourage others of having personal boundaries and making sure to care for their own needs and such, but what I am conflicted on is that I had to actively teach myself said things and become a self-advocate about them, if a 4 Fix were more applicable, would these things just occur naturally to me without active thought?
Sorry for rambling on so much already, just one more bullet please— a contention concerns the 2’s relationship to pride and a sense of superiority; I know this pride isn’t necessarily a conscious experience for a Core Type 2, but nonetheless, I feel quite oppositely in the sense in which I feel utterly inferior to everybody, but this could be a combination of 9 withholding itself and 6’s fear.

…I apologize if this was not an appropriate post; I hope I was able to frame it constructively. I am not asking to be typed by anyone— I am just wondering, please, if what I typed tends to resonate for Enneagram 2. Even then, I think it would be beneficial for me otherwise simply to learn more about and understand Enneagram 2 in general, so I would be greatly appreciative, please, of any information.
Thanks.

submitted by hgilbert_01 to EnneagramType2 [link] [comments]

2024.05.19 08:27 ManyQualms Long post #1. I will end up being back.

I'm just going to vomit all of my thoughts from this past week onto this thread. If this makes zero sense, I'm sorry. Also, this is long. I don't blame you if you don't read it. It's not like I deserve the time of day.
I just can't wait for the school year to be over. I don't dislike school, just everyone in it. Actually, I don't dislike them, i envy them. Thats a better word. I envy them because they dont have to be me. I dont have it hard or anything. Not to them. I try to be nice, i want to be nice. but it feels like my peers don't. they just have a good time using me as a punching bag. at least starting this Friday I'll have a solid 2 months of being able to work on impressing them before I come back. this year and last, I've been a court jester. this next year is my last year at this school before high school. I want to have a good last year. but i would also like to be more social, and that's hard enough.
I honestly don't understand how I've even got this many friends. I don't understand what they gain from being friends with me. If they don't enjoy being friends with me, they'd just tell me, right? I don't think I do them any favors being around them. but i feel annoying around anyone else. I do feel like the worst of my peers. they do all act and look better than me. and I'm not even me during school. I'd be quite the downer if I was. I try to be happy, but it feels forced. being social feels forced and stressful. if I don't know the person, I can legitimately not talk to them. not unless they're a teacher, or they talk to me first. but even if they do, I probably will only talk the bare minimum. I feel uncomfortable just being around anyone in general. I think I feel uncomfortable because I'm lowering other's perspective of them by being near them. Like a dump yard next to a mansion.
It doesn't help that I look roughly 3 years older than I actually am. I've had people tell me I look 16 before. That doesn't look good being surrounded by 12–14-year-olds. I remember specifically last year I was leaving the locker room, and someone said to me "You look like everything bad was made into one person." That stuck with me. Maybe I shouldn't have taken it to heart. But how can I not? Maybe I should focus more on what I think and less what others think. But I just can't do that. Even right now, I'm going to work on myself so that I fit in more. So that other people are nicer to me. I wish I wasn't fat. I really do. I work on it. I try and remember that if I don't need it to live, I shouldn't eat it. But I've gotten so used to eating when I was bored. When I was sad. As a reward. I would go to the fridge. I would get a haircut, but if it's bad, it's only going to provoke more. I'm getting one as soon as possible once school ends. at least if it's bad, it'll grow back a little by the time school lets back in. Nothing will fit with my face though. It's dumb, fatty, and I think it's one of the worse parts of my body. I've got glasses, though. They help round out my face a bit. I still don't look good, but at least I don't look as bad as I could. I also don't look at good as I could, but that's because I can't keep my mouth shut.
Maybe I should have a doctor sew my mouth shut. Maybe I should put my bed in front of my door so I can't take a break from scrolling to go eat. Managing my calories is hard. It shouldn't be, I'm just stupid. I'm also immature. I swear too much, I have a baby voice, and I always have spit in my mouth. I'm gross. I sweat too much and spit too much. Can I control it? No. but I'm not the victim here. I make everyone else the victim by being there. I'm only there because I'm forced to be there. I'd skip daily if I wasn't. I don't want to make anyone uncomfortable by going up and talking to them. I don't want to make anyone uncomfortable by sitting next to them on the bus when its full. I don't want to make anyone uncomfortable by sharing a class with them. I don't want to be a discomforting person. Maybe isolation would be the best course of action. They'd make a classroom just for me to do online lessons in, alone. Probably an old janitor's closet. But I don't think I would be worth the effort. They'd label me unteachable and let me rot in bed at home.
I don't want to be negative. But I did it to myself, really, why didn't I just choose the good genetics? Why didn't I choose to never hunger? To digest food as fast as I bleed? To not sweat? To mature at the same rate as a normal 13-year-old? To be able to disregard any VERY helpful criticism I get? To smell like a field of roses? To be charming? To be attractive? To be normal?
To be honest, self-care doesn't make much sense to me. I don't deserve care to myself. I am to be treated the same as every other pig in the barn yard. If nobody would see it, what's the point? Genuinely. I need validation from my peers. Not that I've ever gotten it. It's human, right? That doesn't mean I need validation though. I'm lucky, though. They could've kicked my skull in the minute I walked through the door. I wouldn't blame them. Not like I could fight back. I'm about as weak as possible.
And that's what I've always been and will always be. The big, weak, ugly, loser that is to be hated. Because ignoring the abnormal will make them think they deserve to be near the fines. The best. The normal. I pity those that look like me, but not worse than me. Nobody could look worse than me. I don't deserve pity though. I deserve the pain that's come to me. I deserve worse, honestly. I'm lucky.

submitted by ManyQualms to self [link] [comments]

2024.05.19 08:19 Glitch109 [Crossover Worldbuilding Idea] What if the MCU, DCEU, MonsterVerse, Resident Evil (Capcom Games), Avatar: The Last Airbender, Netflix's The Dragon Prince, Vivziepop's Hazbin Hotel/Helluva Boss, and Live Action Teenage Mutant Ninja Turtles are set in the same universe?

Inspired by MichaeltheSpikester's idea of a shared world, decided to add my variation of it. But with extra media that I think would fit well with this shared world.
-Several dimensions that were connected to Earth-199999 are not only the Astral, Dark, Mirror, K'un-Lun, Ta Lo, Duat, etc. but also consisted of Chronobowl (DCEU), Mount Olympus (DCEU), Axis Mundi (MonsterVerse), 4 Nations (Avatar: The Last Airbender), Spirit World (Avatar: The Last Airbender), Xadia (Netflix's The Dragon Prince), Heaven & Hell (Hazbin Hotel/Helluva Boss), and the Kraang Dimension (TMNT).
-The Titan's origins originated from the Celestial Tiamut from the Earth's core with the cosmic energy mutating small creatures into giant monsters. It is revealed that every planet in the universe not only has its celestials but also has its own set of Titans that play a key role in the planet's ecosystem. King Ghidorah is revealed to be one of the last few members of his species who survived his planet's Emergence and the reason why he and his kind terraform worlds is to rebuild the home they lost.
-Heaven and the Kraang played a role in the development of the Human race where it is revealed that Humans have various animal DNA, thus having the dormant gene that ties them to their animal ancestor.
-Lilith would be considered the "First Scarlet Witch".
-Due to Heaven's influence, their magic created the Gods and Goddesses in the universe. Adam would eventually create the Council of Godheads, where he is good friends with Zeus from Thor: Love and Thunder (aka Jupiter, the Roman counterpart of Zeus).
-The celestial's cosmic energy not only created Hollow Earth but also created pockets from the Earth's surface that created portals that allowed access to Hollow Earth from the surface.
-Asgardians, ancient Wakanda, Eternals, and Titans banding together with humanity, ancient Atlantis, ancient Green Lanterns, Olympians, and Themsycira in the fight against Darkseid, Steppenwolf, and their forces in ancient history.
-It is revealed that Titans, such as Sehkmet, Na Kika, and an unnamed Thunderbird Titan are responsible for Bashenga's, Talokanil's, and Chafa's origins and abilities instead of the Gods and Goddesses from Thor: Love and Thunder.
-The Titans and Startouch Elves would be labeled as "low-level" gods by the Council of Godheads.
-Atlantis, Asgard, Themyscira, Heaven, and Olympus (When the Greek Gods were still around) were aware of the existence of Titans and the role they play in the Earth's ecosystem. Similar to Asgardians, Titans were responsible for many legends and myths regarding mythical creatures and gods. The relationship between them and benevolent titans would be at best mutual notably towards those like Godzilla and Mothra but otherwise would be at odds with destroyer titans like Rodan and Scylla.
-The Eternals are aware of the Titans as well. Ikaris proposed killing them since they would be affecting the Earth's population and preventing the Emergence from progressing. However, Ajak talked him out of it as they observed Godzilla's species preserving the balance of nature, keeping the population steadying, keeping the other Titans at bay, and hunting/killing giant Deviants as well.
-The Eternals once met with Mothra, who Sersi and Sprite formed a close bond with.
-The animalistic Egyptian Gods and Goddesses (Khonshu, Anubis, Ammit, Tawaret, Horus, etc.) were once human-looking Gods/Goddesses before being exposed to the Kraang's Ooze, which mutated them into more animalistic creatures.
-Godzilla has a mixed relationship with the Eternals. While he approves them for keeping the Earth safe, he doesn't trust them due to their "unnatural" nature due to being from space, which is the same with King Ghidorah.
-Prior to his arrival on earth. King Ghidorah had a fearful reputation across the cosmos by civilizations, similar to that of Darkseid and Thanos.
-Both Thor and Rodan once fought each other in the past when Rodan at some point appeared in Scandinavia and terrorized the people, which prompted the Thunder God to engage. It was a long, withdrawn, and lengthy battle that eventually ended with Thor finally driving Rodan off. Like many legends and myths, this fight inspired one of those about Thor fighting a "Great Bird of Fire".
-Shazam was the first Sorcerer Supreme and taught the Ancient One magic.
-Wonder Woman and the original Shazam took part in imprisoning Ammit alongside the other Egyptian Gods and Goddesses.
-The radiation of Hollow Earth caused certain viruses and organisms to become more hostile when infecting their host while granting them various abilities. Examples include the T-Virus and the E-Series mold.
-Both Asgard and Mount Olympus are aware of Aaravos and his past crimes.
-The Ancient One visited both Xadia and the 4 nations once to learn more about both world's magic. The Ancient One also helped in imprisoning Aaravos.
-While Xadia is aware of dark magic, they are unaware of the Dark Dimension and Dormammu.
-King Ghidorah was without a doubt probably the only being that Darkseid and Thanos had ever developed a grudging respect. Both warlords are aware of King Ghidorah due to being just as feared by civilizations across the cosmos as they are. Despite classing Titans as "low-level" gods, the Council of Godheads also feared King Ghidorah due to his destructive nature.
-The Necrosword is made of the same metallic material used by the Exorcist Angels during their exterminations.
-Wonder Woman's presence in World War I inspired Johann Schmidt (aka Red Skull) to pursue mythology in hopes of creating weaponry for HYDRA.
-Captain America and Wonder Woman met during World War II when Steve was doing his USO Show.
-SHIELD is aware of Monarch and STAR Labs and has often collaborated with each other in the past.
-Packard is a relative of Nick Fury.
-Asgard and Krypton having had a history with one another and the former having tried to warn the latter of their inevitable doom, but were dismissed.
-Prior to Krypton's destruction. Zod and his soldiers had a run-in with Yondu and the Ravagers.
-Both SHIELD and Nick Fury were not only aware of the Titan's existence but also aware of Superman's arrival on Earth and kept close tabs on him since he was a child.
-Both Superman and Chris Redfield were Captain America fans when younger.
-After the T-Virus Incident in Raccoon City, SHIELD and Monarch helped with the clean-up.
-Bruce Wayne, William Stenz, Amanda Waller, and Chris Redfield were all targets of Project Insight.
-Alongside SHIELD, STAR Labs, B.S.A.A., and Monarch were all infiltrated by HYDRA Agents who sought their resources. They stole various technological weapons created by the Motherbox, samples of the T-Virus, and stole Titan DNA to create Titan clones.
-After the Turtles made their debut, SHIELD and Monarch kept close eye on them based on their mutation.
-After the Civil War, Amanda Waller proposed Task Force X to the government, in which Theaddeus Ross was among those who approved it while William Stenz opposed it. Abomination and Baron Zemo were among the possible candidates for Task Force X.
-Task Force X and Monarch weren't affected by the Sokovia Accords due to their connections with the government.
-After the Baker House Incident, SHIELD and Monarch not only helped clean up the situation but also got clues on the E-Series's origin. Not trusting the B.S.A.A. or Blue Umbrella, they gave the info to Chris, which led to his isolation from both organizations.
-Talokan would be considered one of the Kingdoms of Atlantis. Ocean Master would later try to recruit Namor, but decides not to as he was warned by the other rulers that Namor is more dangerous than Ocean Master himself.
-Karathen is revealed to be one of the lost Titans of Earth.
-Wakanda is aware of the existence of Atlantis but their ancestors have made a treaty with each other in not interfering. After the events of Aquaman, both T'Challa and Arthur meet in secret to discuss how to unite their kingdoms together and reveal their secret to the world. While Arthur respects T'Challa, he wants to keep Atlantis a secret until the time is right.
-Katolis would be aware of various magical humans such as Original Shazam and the Ancient One.
-Clark Kent/Superman, Diana Prince/Wonder Woman, Billy Batson/Shazam, and Mothra are beings capable of lifting Mjolnir.
-At the Senate hearing, alongside Serizawa, Nick Fury and Calvin Swanwick (Martian Manhunter) are among those who defended the Titans while Thaddeus Ross and Amanda Waller voiced against them.
-After the Titans were released, several Titans, such as Titanus Sehkmet, Behemoth, and Mokele-Mbembe all resided near Wakanda and all bonded with T'Challa/Black Panther while Titans such as Titanus Na Kika, Tiamat, and Amhuluk all resided near Talokan and bond with Namor.
-By the end of Infinity War and during the events of Endgame. Superman, Batman, Wonder Woman, Lois Lane, Martian Manhunter, Joker, Lex Luthor, Black Mask, Victor Zsasz, Black Canary, Renee Montoya, Huntress, Cassandra Cain, Bruce the Hyena, Bloodsport, Harley Quinn, Rick Flagg, King Shark, Ratcatcher 2 and Sebastian, Polka-Dot Man, Captain Boomerang, Savant, Javelin, Blackguard, Mongal, T.D.K., Weasel, Thinker, Billy Batson/Shazam, Billy's foster parents and siblings, Amanda Waller, Emilia Harcourt, John Economos, Adebayo Waller, Clemson Murn/Ik Nobe Llok, Goff/Sophie Song/Eek Stack Ik Ik, Casper Locke, Larry Fitzgibbon, James Gordon, Atlanna, Mera, Arthur Jr., Starro, Peacemaker, White Dragon, Hawkman, Doctor Fate, Cyclone, Atom Smasher, Adrianna Tomaz, Karim, Amon Tomaz, Ishmael GregoSabbac, Blue Beetle and the Reyes family, Victoria and Jenny Kord, Carapax, Madison Russell, Mark Russell, Illene Chen, Houston Brooks, Sam Coleman, Nathan Lind, Illene Andrews, Jia, Josh Valentine, Bernie Hayes, Travis Beasley/Trapper, Walter and Maia Simmons, Ren Serizawa, Alan Jonah, Godzilla, Kong, half of the known titans, Leon Kennedy, Chris Redfield, Claire Redfield, Ethan Winters, Mia Winters, Zoe Baker, Joe Baker, Mother Miranda, Karl Heisenberg, Lady Dimitrescu, Salvatore Moreau, Donna Beneviento, The Duke, Chris's Team, the Turtles, and Baxter Stockman would be amongst the survivors of The Blip.
-Flash, Cyborg, Aquaman, Perry White, Martha Kent, Stephen Shin, Deadshot, Deathstroke, Katana, Killer Croc, Ling Chen, Rick Stanton, Diane Foster, Jackson Barnes, Anthony Martinez, Lauren Griffin, Rodan, other half of the known titans, Jill Valentine, Ada Wong, Sensei Splinter, Bebop, and Rocksteady were amongst the victims of The Blip.
-Similar to Scott Lang, Black Adam, Mothra, Khaji-Da, and the inhabitants of the 4 nations, Xadia, Heaven, and Hell would not be affected by the Blip.
-The only beings that sensed the Blip were the Avatar (Aang), The Archdragons of Xadia (Zubeia, Rex Igneous, Domina Profundis, and Sol Regem), the Seraphim (Sera and Emily), the Goetian Hierarchy (Stolas and Octavia), and the 7 Deadly Sins (Lucifer Morningstar, Asmodeus, Satan, Mammon, Beelzebub, Leviathan, and Belphegor).
-The victims of the Blip weren't sent to Heaven or Hell, they were stuck in Limbo.
-During the post-Blip, due to Thanos' actions, Godzilla had a hard time in trying to keep balance of the Earth with half of the remaining titans running loose. Due to the world powers struggling, they helped fund Apex Cybernetics to stabilize their economy as well as unknowingly helping Walter process with his Mechagodzilla experiment.
-Because of Thanos, the Corto Maltese government took advantage of this by continuing their experiments with Project Starfish and the Intergang were able to operate and have full control over Kahndaq. Many crime organizations in Gotham have either been dismantled due to the disappearance of the leaders or have been absorbed into the Black Mask Crime Organization. Jaime's family and his community go through financial struggles from Kord Industries due to the effects of the Blip.
-Due to less hero activity, the I.M.P.s operated their assassination business.
-Kingpin met with Joker and Black Mask during the Blip where the 2 made mutual agreements in developing a partnership. However, this agreement was broken due to Black Mask's death.
-The Joker was on Ronan's list of targets. However, due to his powerful influence, he was forced to back down.
-Due to the effects of the Blip, the butterflies decided to start their invasion by infecting powerful humans.
-After the Village's destruction, SHIELD aids Chris in a war against B.S.A.A.
-After Doctor Fate's death, Hawkman gives the Helmet of Fate to Kamar-Taj for safekeeping so it doesn't fall into the wrong hands.
-The Avengers and Justice League team up and join the time heist to find the Infinity Stones. With Iron Man's and Batman's technology, they create a black and red infinity gauntlet. Hulk still snaps his fingers which brings every living being back. During the final battle with Thanos, the Justice Society, Black Adam, Godzilla, and the other Titans arrive to join in the fight.
-Victoria Kord and Walter Simmons are among the many people who also had a hatred towards Tony Stark and are joyful about his death.
-After the events of Blue Beetle, Damage Control tried to apprehend him but was forced to back down due to public support.
-Godzilla would grow hostile towards the Hex that Wanda made. Due to being composed of cosmic radiation from the celestial, Godzilla and the other Titans are revealed to be immune to magic due to their massive size as well as not being affected by the Hex's effects. However, once Wanda leaves Westview, Godzilla will leave as well.
-After Endgame, Apex Cybernetics not only seeks to eliminate Titans but also superpowered individuals as well. After the events of GvK, Damage Control cleaned up the damage and acquired their resources.
-Among the deceased that would be in Heaven based on Adam's rule: "Act selfless, Don't Steal, and Stick it to the man" would be Tony Stark/Iron Man, Natasha Romanoff/Black Widow, Peggy Carter, Ancient One, Ben Parker, May Parker, Pietro Maximoff/Quicksilver, Phil Coulson, Steve Trevor, Jonathan Kent, Chato Santana/El Diablo, Silas Stone, Rick Flag, Alberto Reyes, José Morales, Ignacio Carapax/OMAC, and Nuidis Vulko.
-Among the deceased that would be in Hell and have the potential to become Overlords are Obadiah Stane/Iron Monger, Ivan Vanko/Whiplash, TrevoThe Mandarin, Alexander Pierce, Dreykov, Xu Wenwu, Quentin Beck/Mysterio, Roman Sionis/Black Mask, Victor Zsaasz, David Kane/Black Manta, and Walter Simmons.
-Wanting to reconnect with his daughter, Mark Russell resigns his position as leader of Monarch and Bruce BanneHulk becomes the next head of Monarch due to his knowledge of Nuclear Physics.
-Both the Great Protector and Dweller-in-Darkness are revealed to be Titans who stumbled upon Ta Lo.
-In Xadia, Viren was resurrected 5 years later rather than 2 (Events of S1-3 take place in 2019-and S4-6 take place in 2024).
-Due to the effects of the Emergence and the Deviants, Godzilla would ally with the Eternals in hunting down and killing the Deviants as well as stopping the Emergence from happening.
-The Benevolent Titans have gained a reputation due to their involvement in keeping the planet safe and healthy.
-Driven by vengeance, Overlord Quentin Beck/Mysterio pays the I.M.P.s to assassinate Peter ParkeSpider-Man. However, this is during the events of No Way Home and when Doctor Strange performs the spell that erases everyone's memory of who Spider-Man is, the I.M.P.s were affected as well and called the mission off due to their amnesia.
-Maya Lopez's/Echo's Powers awaken the ancient Thunderbird Titan that lives near her hometown. She successfully bonds with the Titan.
-Ms. Marvel would not only be a Captain Marvel fan but also a Wonder Woman and Mothra fan as well.
-Riri Williams is a huge fan of both Iron Man and Cyborg which influenced her to create her own enhanced suits. While she has an intense hatred towards Apex Cybernetics after their dirty secrets were exposed, Riri started making concepts on how to build a giant-mech suit to combat hostile Titans.
-Thor recruits Wonder Woman and the Shazam family to help them stop Gorr the God Butcher. They arrive at Omnipotence City where Wonder Woman exposes the Greek Gods being the Roman counterparts with Zeus' real identity revealed to be Jupiter. After the mission, Thor gives Shazam the Thunderbolt.
-Wonder Woman then encounters Marc SpecteMoon Knight where she sees and speaks with Khonshu.
-When Doctor Strange and America Chavez arrive on Earth-838, they meet the Illuminati which not only consists of Captain Carter, Blackbolt, Captain Marvel (Maria Rambeau), and Mister Fantastic but also consists of Christian Bale's Batman and Brandon Routh's Superman.
-Same with Wakanda, the U.N. held a conference on whether the Titans should be contained or killed. Director Fontaine would state that the Titan's radiation helps balance the ecosystem of the planet and propose a solution where they can imprison the Titans and drain this energy they embody to help sustain the ecosystem, thus having them alive, but tortured.
-After Shuri takes the heart-shaped herb and becomes the next Black Panther, she communicates with Sehkmet, Behemoth, and Mokele-Mbembe for the first time. She convinces them to take part in the battle against Namor by battling against Na Kika, Tiamat, and Amhuluk.
-After the battle, Wakanda becomes harmonious with their Titans as they are welcomed in Wakanda and become its protectors alongside Shuri.
-After the alliance with Talokan, Aquaman visits Shuri on the same beach where she meets her nephew, T'Challa II, and warns her about her deal with Namor. Then he introduces his son, Arthur Jr., where he and T'Challa II develop a brotherly bond with each other.
-Due to the Secret Invasion, Superman was affected by the Anti-Alien Act and was forced into hiding.
-During the events of Secret Invasion, the Turtles were forced into hiding due to being confused for Skrulls.
-After the events of The Flash, Doctor Strange and Clea confront him that his actions in altering time created more incursions and recruit him to have them fixed.
-After the events of the Marvels, Monica Rambeau not only meets Binary and Beast but also meets Michael Keaton's Batman and Sasha Calle's Supergirl.
-After the events of Lost Kingdom, Atlantis revealed its existence to the world by joining alliances with the UN and Wakanda.
-Ms. Marvel's Quantum Bands and Shang-Chi's Ten Rings start behaving weirdly as they detect a signal from deep within Hollow Earth, signifying a war cry from ancient Titans known as the Skar King and Shimo.
-As Namor is preparing for the war against the surface by aligning themselves with Wakanda, he commands the Titans he bonded to gain strength. However, one of the Titans, Tiamat, is killed by Godzilla, and Namor is saddened when hearing the news.
-Ms. Marvel's Quantum Bands attracts the attention of Mothra, who believes that Mothra may be the key to bringing back Monica Rambaeu.
-The Avatar's (Aang) awakening was sensed by Doctor Strange.
Overall, this is my take on how this shared world would go. If you have any suggestions on how the shared world would go, feel free to reply!
Special thanks to MichaeltheSpikester for the idea!

submitted by Glitch109 to WhatIfFiction [link] [comments]

2024.05.19 08:13 GuiltlessMaple Best Car Freshies

https://preview.redd.it/j93h5znxrb1d1.jpg?width=720&format=pjpg&auto=webp&s=02f5c1a8e11547f467b6e31c6b72f1abbcdba148
Get ready to rev up your driving experience with our handpicked selection of Car Freshies! Our article delves into a variety of these stylish, odor-eliminating gadgets that'll turn your car into a veritable oasis of freshness. Whether you're aiming to combat lingering smells or just refresh your ride's interior, we've got you covered. Read on for the ultimate guide to finding the perfect Car Freshie to suit your needs.

The Top 5 Best Car Freshies

Ultra-Fresh Champagne & Soirees Car Air Freshener - Vilicci Champagne and Soirees Car Air Freshener" - Elegant, zesty floral bliss that sparks nostalgia for those champagne-soaked, glittering soirees with great company.
Smiley Face 'I Didn't Plan on Getting Out of the Car' Car Air Freshener by Simply Southern - Elevate your surroundings with the delightfully quirky "I Didn't Plan on Getting Out of The Car" Smiley Air Freshener by Simply Southern, offering a 30-45 days long enjoyable aroma while adding a fun and positive touch.
Exotic Car Air Freshener by Vilicci - Experience the captivating allure of Liquid Fantasy, a premium car air freshener that lasts over a month, exuding a unique, unisex scent crafted with high-quality, long-lasting blends in Canada.
Clip-On Vent Car Air Freshener with Aromatherapy - Experience the power of aromatherapy on-the-go with the Refreshing Aromatherapy Clip-On Vent Air Freshener, an effective and compact solution for eliminating bad car odors.
DIY Unscented Aroma Beads Car Air Freshener Supply - MUBYOK Unscented Aroma Beads, premium-grade DIY car freshener and environmentally-friendly material, effortlessly absorb fragrance oils for a customizable scent experience that's perfect for gifting and enhancing small spaces.

As an Amazon™ Associate, we earn from qualifying purchases.

Reviews

🔗Ultra-Fresh Champagne & Soirees Car Air Freshener

https://preview.redd.it/cx266eyxrb1d1.jpg?width=720&format=pjpg&auto=webp&s=2c5675fb97c5d424f06fc01b7e899a81998e0d7e
As I cruised down the highway with my windows down, the rich aroma of Champagne and Soirees wafted through my car, filling it with the scent of a lavish garden party. I had been using the Vilicci Car Air Freshener for a few weeks now, and it had truly transformed the atmosphere inside my vehicle.
The fragrance is an intoxicating blend of fresh orange blossoms, exotic jasmine, earthy patchouli, and a hint of Turkish rose. This zesty, floral scent instantly transported me back to my last soiree, where laughter, champagne, and good company were in abundance.
One of the standout features of this air freshener is its longevity. I usually replace my car's air freshener every month or so, but with this one, I feel confident that it will last much longer. Additionally, the compact size makes it easy to store and transfer between cars - perfect for those of us with more than one vehicle.
On the downside, the scent may not be as potent for some people as it is for me. While I adore the subtle, fresh fragrance, others might prefer something more bold and powerful. However, this is a highly personal preference, and the overall quality of the product cannot be denied.
In conclusion, if you're looking to add a touch of class and elegance to your car's interior, the Vilicci Car Air Freshener in Champagne and Soirees is definitely worth a try. Its luxurious scent and impressive longevity make it a worthwhile investment for any car owner seeking to enhance their driving experience.

🔗Smiley Face 'I Didn't Plan on Getting Out of the Car' Car Air Freshener by Simply Southern

https://preview.redd.it/ys94i8tyrb1d1.jpg?width=720&format=pjpg&auto=webp&s=eeb4fda8c101c1e0ecc794f45c624e66821d1572
I never thought I'd be raving about an air freshener, but the Simply Southern 'I Didn't Plan on Getting Out of the Car' Smiley Air Freshener has completely changed my perspective on car fresheners. As a daily commuter, I had become accustomed to the not-so-pleasant odors that came with being stuck in traffic. However, since hanging this cheerful freshener in my car, those stale smells are now a thing of the past.
The first thing that caught my attention was its whimsical design. With its cheerful smiley face and humorous text, it instantly added a touch of fun to my otherwise mundane commute. Plus, the fact that it's crafted by the renowned Simply Southern brand only added to its appeal.
But what truly sets this air freshener apart from others is its incredible lasting power. I was pleasantly surprised to find that the aroma lingered for well over a month before needing a replacement, making it a cost-effective solution as well.
Now, I'm not going to lie – there isn't a whole lot of variety when it comes to air fresheners. They all tend to do the same job, which is why I usually don't give them too much thought. However, this particular product has definitely made a lasting impression on me.
The only minor drawback I can think of is that the fragrance might not be to everyone's liking. While I personally enjoy it, I can see how some people might find it too strong or overpowering. But overall, I couldn't be happier with my purchase and would highly recommend the Simply Southern Smiley Air Freshener to anyone looking for a fun and effective way to freshen up their car.

🔗Exotic Car Air Freshener by Vilicci

https://preview.redd.it/bjh1j35zrb1d1.jpg?width=720&format=pjpg&auto=webp&s=0472d0b9448ed6e07b5cd06ff8b9bed977e4cb0c

You know how sometimes you just need a little something to make your daily drive feel a bit more special? Well, that's exactly what the Vilicci Liquid Fantasy Air Freshener did for me. This baby has a unique, sophisticated scent that really adds some flair to your car.
One of the things that really stands out about this air freshener is its longevity. After a week of using it, my car still smells as fresh as it did when I first installed it. The best part? It's not just a simple fruity smell, but a complex blend of premium ingredients. It's kind of like how your favorite perfume or cologne has that perfect balance of notes - well, that's what this air freshener delivers.
Now, one downside I have to mention is that once you activate it, you need to be careful not to touch it directly to your car's plastic surfaces. But other than that, this air freshener is a game-changer. Its high-quality blend and month-long longevity make it a must-have accessory for anyone who appreciates the little things that can make a big difference in their day-to-day life.

🔗Clip-On Vent Car Air Freshener with Aromatherapy

https://preview.redd.it/3qmq58nzrb1d1.jpg?width=720&format=pjpg&auto=webp&s=ade279ea979541b664ee92b94ef31c19b08fd926
As a busy mom on-the-go, I'm always trying to keep my car smelling fresh despite the occasional spilled juice or forgotten snack. That's why I absolutely fell in love with the Refreshing Aromatherapy Clip-On Vent Air Freshener. Not only does it effectively eliminate any lingering odors in my car, but it also looks beautiful and adds a touch of elegance to my ride.
One of the best features of this little gem is its adjustable scent control, which allows me to customize the aroma strength according to my preferences and the size of my car. And unlike traditional hanging air fresheners, it doesn't take up any valuable real estate on my rearview mirror, which is a major plus!
Now, one slightly negative aspect that I've come across is the longevity of the scent. It doesn't last as long as I would like, so I find myself needing to replace it more frequently than I'd hoped. But honestly, the convenience and effectiveness it offers more than make up for it.
So if you're tired of battling stubborn car odors, look no further than the Refreshing Aromatherapy Clip-On Vent Air Freshener. You won't be disappointed!

🔗DIY Unscented Aroma Beads Car Air Freshener Supply

https://preview.redd.it/fc815ytzrb1d1.jpg?width=720&format=pjpg&auto=webp&s=54c1cb22087ccbee2880dec5bacab8fdd6b0d342
I recently discovered MUBYOK's 3lb Premium Unscented Aroma Beads while searching for a solution to keep my car smelling fresh. As someone who spends a lot of time behind the wheel, I knew I needed something effective. To my delight, these beads did not disappoint.
MUBYOK's Aroma Beads are made from high-quality Ethylene Vinyl Acetate Copolymer, which not only guarantees great performance but also ensures that they're safe for the environment. Their ability to hold up to 30% of their weight in fragrance oil is impressive, meaning they last long and are cost-effective.
I was thrilled to find how versatile these beads are. Not only can they be used in a DIY car freshener, but I also discovered that by placing them in a sachet bag, they can freshen up closets, offices, and other spaces in my home. Plus, they make great DIY gift options for friends and family.
While there's no denying the effectiveness of MUBYOK's Aroma Beads, one downside might be finding a suitable fragrance to enhance their effectiveness. However, with a little creativity and some research, this drawback can be easily overcome.
Overall, I'm really glad I stumbled upon MUBYOK's 3lb Premium Unscented Aroma Beads. They've not only kept my car smelling fresh, but have also turned out to be a useful addition to my home. I would recommend them to anyone looking for a cost-effective, long-lasting solution to maintaining a pleasant scent.

Buyer's Guide

Freshen up your car's interior with the right car fresheners. Choose from various types, scents, and designs to suit your taste and preferences.

Important Features

https://preview.redd.it/zg5iaoc0sb1d1.jpg?width=720&format=pjpg&auto=webp&s=e780e52bd624d2bf6fc0d1cdaabb4c6175d7dfa1

Odor neutralizing abilities
Long-lasting scent
Aesthetically pleasing design

Considerations

Type of freshener (vent clip, hanging, gel, spray)
Scent strength and type (floral, fruity, masculine, feminine)
Size and placement options
Allergen-free and non-toxic

General Advice

To find the perfect car freshener, consider your personal preferences and the needs of your passengers. Be sure to select a long-lasting, effective freshener that is easy to use and maintain. Additionally, avoid choosing overly strong scents that may be distracting or irritating while driving.

https://preview.redd.it/kgaeqyq0sb1d1.jpg?width=720&format=pjpg&auto=webp&s=c62b725289731155904ff575c70cf20c20e8ee0a

FAQ

1. What are Car Freshies?

Car Freshies are air fresheners designed to improve the scent of a car's interior. They come in various shapes, sizes, and fragrances to suit different preferences.

2. How do Car Freshies work?

https://preview.redd.it/3wi65781sb1d1.jpg?width=720&format=pjpg&auto=webp&s=9a500a67e14714e07cfa67f7970adbd5cbec8388
Car Freshies absorb odors and release a pleasant fragrance to mask unpleasant smells in your vehicle. They can be hung from the rearview mirror, placed on the dashboard, or attached to the air vents.

3. How long do Car Freshies last?

The longevity of Car Freshies depends on the specific product, fragrance intensity, and frequency of use. Generally, they last between 30 days to several months.

4. Are Car Freshies safe for the environment?

Many Car Freshies are eco-friendly, containing natural fragrances and biodegradable materials. However, some may contain chemicals, so always check the product label for safety information.

https://preview.redd.it/mdrgryy1sb1d1.jpg?width=720&format=pjpg&auto=webp&s=70df3402ecd55e3764c04d01d08ece13c39d76a7

5. How many Car Freshies should be used in a car?

One or two Car Freshies are usually sufficient to maintain a pleasant fragrance in most vehicles. Using more than three can create an overpowering scent that may be uncomfortable for passengers.

6. Can Car Freshies be used in other places besides cars?

Yes, Car Freshies can be used in other small spaces like closets, lockers, gym bags, or drawers to eliminate odors and keep items smelling fresh.

7. Are Car Freshies suitable for allergy sufferers?

While many Car Freshies are hypoallergenic, some individuals may still experience allergic reactions to certain fragrances or chemicals in the product. It is recommended to choose a fragrance-free or allergen-free option if you have allergies or sensitive skin.

8. How should Car Freshies be properly disposed of?

After the Car Freshie has lost its fragrance, it should be thrown away in the regular trash. Avoid flushing them down the toilet or throwing them into a recycling bin, as they may harm the environment or contaminate recycled materials.

9. Can Car Freshies be used in conjunction with other air fresheners?

Yes, you can use Car Freshies along with other air fresheners, such as sprays or diffusers, to enhance the freshness of your car's interior. However, be cautious not to create an overpowering scent that may be uncomfortable for passengers.

10. How can I choose the best Car Freshie for my car?

Consider factors like fragrance preference, eco-friendliness, and your car's size when selecting a Car Freshie. Reading reviews from other customers and checking product ratings can also help you make an informed decision.
As an Amazon™ Associate, we earn from qualifying purchases.

submitted by GuiltlessMaple to u/GuiltlessMaple [link] [comments]

2024.05.19 08:11 Sweet-Count2557 Things To Do In Tangier Morocco in 2024

Things To Do In Tangier Morocco in 2024
We're here to tell you about the amazing Things To Do In Tangier Morocco.
From exploring its bustling medina and shopping at the Souk el Khemis to taking a day trip to the Caves of Hercules and touring the American Legation Museum, there is something for everyone!
Whether you're looking for culture and history or a relaxing beach day, Tangier has it all.
You'll never be bored as there are so many unique activities to keep you busy during your stay.
So put on your walking shoes, grab a map, and let's explore what this city has to offer!
Exploring the Medina of Tangier
A trip to Tangier wouldn't be complete without exploring its historic medina, a vibrant hub of culture and activity teeming with captivating sights.
Strolling through the narrow, winding streets is a must-do; as you make your way, take in the colorful shopfronts selling everything from spices to souvenirs.
Sample some of the street food vendors hawking their traditional Moroccan dishes or pick up some freshly squeezed orange juice for an energizing snack.
Once you've filled up on delicious food and drinks, explore the bustling marketplaces full of lively locals trading goods and services.
Afterwards, get ready for a night out!
The medina's nightlife scene is renowned throughout Morocco; discover hidden bars tucked away in secret alleyways or join in on the dancing at one of the local clubs.
As you make your way through the medina late at night, keep an eye out for any special events that might be happening – you never know what kind of incredible experiences await!
No matter how long you visit Tangier, spending time in its fascinating medina is sure to leave lasting memories – it's truly an experience like no other.
From sampling street food to immersing yourself in its bustling nightlife scene, there are plenty of ways to fill your days and nights here.
Don't forget to capture some photos along the way – they'll be treasured reminders when reminiscing about this amazing destination later on!
Visiting the Kasbah Museum
Visiting the Kasbah Museum provides a unique opportunity to explore Morocco's rich cultural history, like learning about Mohamed Abou Ali Ben Abdallah - the founder of Tangier. As we wander through the museum, admiring its architecture, we get a glimpse of how Tangier was before and learn more about its beginnings.
We can also taste some local cuisine in nearby restaurants or cafes after exploring the museum which is an interesting way to further appreciate Moroccan culture.
The Kasbah Museum is filled with artifacts such as pottery, jewelry from different eras, clothing and traditional musical instruments from all over Morocco. Visitors can admire intricate designs on clothing pieces that were made centuries ago or be fascinated by traditional dishes and hear stories about how they are prepared.
The museum also offers audio tours that provide us with even more information about these ancient relics.
We leave feeling inspired and enriched by our experience at the Kasbah Museum; it has been truly eye-opening for us to learn more about Morocco's cultural heritage in this way.
There is something special here that must be experienced firsthand – a connection between past and present that cannot be found anywhere else in Tangier!
Enjoying the Beach at Cap Spartel
Taking in the breathtaking views of Cap Spartel's beach is sure to take your breath away! Located at the northernmost point of Africa, this beach offers a truly unique experience.
Here are just some of the things you can enjoy while visiting:
Admiring sunsets: Whether you're relaxing on the shore or taking a peaceful stroll along the beach, be sure to take some time to admire the stunning colors of Morocco's setting sun.
Tasting seafood: With its proximity to both Tangier and Spain, Cap Spartel offers an unbeatable selection of freshly-caught seafood that will tantalize your taste buds.
Taking a dip in the ocean: Enjoy swimming and snorkeling among crystal clear waters for an unforgettable experience during your visit.
Shopping for souvenirs: Explore local markets and shops along Cap Spartel's shoreline for unique items to bring home as mementos of your trip.
Exploring nearby attractions: The lighthouse at Cape Spartel is one of many historical sites within easy reach from this beautiful beach.
No matter what type of activities you prefer while on vacation, there's something special waiting for you at Cap Spartel Beach. From admiring awe-inspiring sunsets to tasting delicious seafood dishes or simply enjoying some restful relaxation by the sea, make sure not to miss out on all this amazing destination has to offer!
Taking a Day Trip to the Caves of Hercules
Located just 10km from the beach at Cap Spartel, the Caves of Hercules offer a captivating glimpse into ancient history - with over 6 million visitors each year!
The caves have been used for religious ceremonies and were once believed to be the entrance to an underground world. They are also known for their spectacular views overlooking Tangier Bay.
When visiting the Caves of Hercules, we highly recommend taking a boat tour around them. This is a great way to get close up views of their impressive cliffs and rocky landscape while learning how they have shaped Morocco's culture and history.
On these tours, you can even spot some wildlife such as dolphins and sea lions! You'll also pass by restaurants where you can stop to enjoy some delicious local cuisine.
Visiting the Caves of Hercules is a must-do when in Tangier Morocco – it's an experience that will stay with you forever. Whether it's on one of the many boat tours or simply admiring them from afar, this historical site will surely leave you awe-struck.
So, grab your camera and get ready for an unforgettable adventure!
Shopping at the Souk el Khemis
Experience a unique shopping adventure at Souk el Khemis and immerse yourself in the vibrant atmosphere of this traditional marketplace!
Located in Tangier, Morocco, Souk el Khemis is the perfect place to experience the hustle and bustle of local markets.
Here you can find everything from spices, clothing, jewelry, and handmade crafts to Morrocan-style furniture.
Bargaining is an essential part of the shopping experience here - just make sure you're respectful and keep your cool when negotiating prices with shopkeepers.
It's important to remember that cultural differences should be taken into account when bargaining tips too; never bargain too aggressively or try to take advantage of someone.
Take some time to wander around this bustling market and soak up all its colors and sounds - it's a great way to get a feel for life in Tangier.
Sample some street food as you explore the different stalls or exchange conversation with friendly locals as you browse through their wares.
The market itself has been operating since at least 1904 so there's plenty of history here too which makes it even more interesting!
Whether you're looking for souvenirs from your trip or something special for yourself, Souk el Khemis will have what you need.
A visit to Souk el Khemis is essential for any traveler looking to get an authentic taste of Moroccan culture.
Spend some time discovering all the goods on offer here; no matter what items catch your eye at this lively open-air bazaar, it's sure to be a memorable experience!
Touring the American Legation Museum
Discover the fascinating story of American-Moroccan relations at the American Legation Museum, and journey through time as you explore its incredible artifacts!
Located in the heart of Tangier's old medina, this museum is housed in an imposing 19th century building that was originally built to be a diplomatic mission. Admire its grand architecture as you step into a unique part of Morocco's history.
The museum does an excellent job of highlighting the important role that the United States has played in Moroccan culture over the past two centuries. Explore two floors of exhibits featuring photographs, documents, and objects related to this relationship between Morocco and America.
Get a better understanding about how modern-day Tangier is connected to its past by learning about events such as Muhammad V’s visit to Washington D.C., the US Navy’s presence in Tangier during World War II, and more.
Get even closer to local life by tasting some delicious Moroccan cuisine nearby or visiting some traditional shops! The American Legation Museum offers a truly unique experience for visitors seeking insight into Morocco’s long-standing relationship with America.
It provides an opportunity to gain knowledge about events that have shaped both countries' histories while admiring beautiful architecture and tasting local cuisine! Don't miss out on this incredible opportunity while visiting Tangier - it's sure to be one you won't forget!
Exploring the Ruins of Volubilis
Immerse yourself in history and explore the ruins of Volubilis like a time traveler, with its ancient stones standing as silent sentinels of the past.
Located near Meknes in north-central Morocco, this archaeological site offers an unparalleled opportunity to experience culture and discover history.
Wander around and your gaze will be drawn to impressive structures such as the basilica, triumphal arch, and forum, all covered with intricate mosaics depicting scenes from Greek mythology. Though many of these have been damaged over the centuries by earthquakes or looters, they still provide a fascinating insight into life during Roman times.
In addition to the grandeur of its ruins, Volubilis holds some other secrets too; it's home to several unique species of plants that aren't found anywhere else in North Africa.
As you wander through the olive groves and palm trees, keep an eye out for lilies called 'thousand flowers', a type of wild iris which blooms between April and May each year. The sight is truly magnificent!
Volubilis may not be as large or well-preserved as some other historical sites in Morocco, but it certainly deserves a visit for those interested in discovering more about this nation's past.
From its glorious monuments to its flora and fauna – there's something here for everyone who loves learning about ancient cultures!
Frequently Asked Questions
Is it safe to travel to Tangier?
We've all heard the warnings about traveling to Morocco, but is it really safe to explore Tangier solo?
The truth is, if you take a few simple precautions and use your common sense, you'll find that Tangier is an incredibly safe city with tons of nightlife options.
From traditional Moroccan entertainment like belly dancing and live music performances to bustling night markets offering delicious street food and unique souvenirs, there's something for everyone.
You can even enjoy a romantic dinner cruise along the waterfront!
In short, Tangier may be steeped in culture and history, but it's also one of the safest cities in Morocco - perfect for exploring on your own.
What are the best restaurants in Tangier?
Exploring the cuisine of Tangier is an exciting way to experience the city! There are plenty of great restaurants in this Moroccan city. From local flavors to classic dishes, some of our favorites include:
Restaurant Dar Naji for its delicious tagines
Le Petit Poucet for its traditional couscous
La Porte Bleue for its fresh seafood
Whether you're looking for a quick bite or a full-blown feast, these eateries will provide an unforgettable culinary experience.
Is there public transportation available in Tangier?
We're exploring the options for public transportation in Tangier, and it's like taking a journey through time.
From sightseeing tours to traditional taxis, there's something for everyone looking to get around this city. Whether you're looking for an efficient way of getting from place to place or simply want to take in some of the sights, public transportation in Tangier offers plenty of choices.
The city's bus system is extensive, with routes that span across the city and beyond. Taxis are also available, offering traditional methods of transport which provide an authentic experience as you explore the city.
For those who don't mind walking or cycling, there are plenty of pathways throughout the area perfect for sightseeing tours - allowing you to really make the most of your trip!
Are there any cultural events or festivals held in Tangier?
When visiting Tangier, there are plenty of cultural events and festivals to experience!
From sightseeing tours to harbor cruises, you can immerse yourself in the beauty and energy of this vibrant city.
Notable events include the International Festival of Mediterranean Music which celebrates local musical culture and welcomes international talent, as well as the Marathon des Alpes Maritimes which takes place between Tangier and Asilah.
Additionally, during Ramadan there's a special night market where locals gather for shopping, food stalls, music performances and more.
No matter when you visit Tangier, you'll find something exciting to experience!
What is the best time of year to visit Tangier?
We're always looking for the perfect time to explore Tangier's rich culture and stunning beaches.
From January to April, temperatures range from mild to warm, providing the ideal opportunity for visiting medinas and exploring the city's vibrant atmosphere. The days are bright and sunny, while evenings are filled with starry nights perfect for stargazing.
In addition, summer months bring plenty of sunshine during the day and cooler evenings that make sightseeing a pleasure.
No matter what time of year you choose to visit Tangier, you'll be sure to have an unforgettable experience!
Conclusion
We've certainly had an unforgettable time exploring Tangier. From the Kasbah Museum to the Souk el Khemis, there's so much to see and do here.
Even though we didn't get to explore everything this trip, we still feel like we got a good taste of what the city has to offer.
We were surprised by how much history was lurking around every corner - it truly is an ironic juxtaposition of ancient ruins and modern life.
All in all, spending time in Tangier has been a fantastic experience that we won't soon forget!

submitted by Sweet-Count2557 to worldkidstravel [link] [comments]

2024.05.19 08:08 Iam-scared-of-myself Venting about people, systems, racism, the world in general. NO HATE TOWARDS ANYONE, THIS IS JUST VENTING FRUSTRATION

*CONTAINS SWEARING*
This is gonna be a hefty and most likely triggering post for specific groups of people out there (meaning people who struggle with anger, people who don't want poltical content/opinions etc), so please stop reading and leave if you figure this is gonna be rough for you. This will (mainly) be about the conflict between Palestine and Israel. (and apparently a long one) No hate towards any specific groups of people, but I do have a lot of *frustration regarding behaviours*.
Before I start, I want you to remember some facts about me as you read;
I am autistic
I am heavily influenced by world peace, hate, racism and other unfair situations
I have incredibly high standards for myself that I strive to not break, including, but not limited to, being kind and respectful *always*, despite being in a bad mood, not liking someone, or disagreeing, especially political disagreements
I have always, and will always, stand against widespread hate, racism and other discrimination towards any specific religions, ethnicities, nationalities, cultures, etc.
I also want you to know that I named this throwaway accordingly.
So let's get this shitshow started then, shall we.
As the details of the conflict stands, it is beyond obvious to me that this is racism and, literally, a Holocaust. Not *the* Holocaust, but *a* Holocaust. Oxford Languages has the term defined as a destruction or slaughter on a mass scale, especially caused by fire or nuclear war . I'd say that's very much accurate. Proof to come.
Regardless, this situation has had me very pressed the last almost 8 months, as I know most other people have been too. Without getting too much into the conflict itself, I want to talk a little about what I've seen from the Jewish community.
This is where I advise anyone who struggles with anger especially to leave and try to keep your day positive. If you have a magical potion to stay stable after this, who am I to stop you...
Alright, onto the dreaded part. And yes, I am stalling.
I have never, and I truly mean *never* had any hateful thoughts or opinions about religions (other than Christianity but that's one for another time), and as we are all aware of, The Holocaust had massive effect on the world some 80 years ago. I have always seen Jews as victims due to this, but in recent times I've realised that a lot of them, too, see themselves as victims. The issue is that they aren't the victims right now. They (Israel) aren't defending themselves, they have nothing to defend themselves against. Israel is currently doing the exact same thing as Germany did to them, to Palestine. Sure, maybe at some point who knows when, Palestine *was* the land of Jews, but since then, multiple religions have been thriving together on that land, including Jews. They were never excluded. From what I've understood, there weren't any wars or conflicts going on within the country that didn't happen elsewhere. The issue began when in the late 1940's zionists brutally murdered families to steal their homes. I'm sure the situation was so much more complex than that, but in a nutshell that is basically it. The fact that everyone today have been so desensitized from the travesties happening around the world is depressing and hope-killing. I truly am well on the way to giving up, and at this point in time I'm so angry all the time due to the Middle East's situation.
So a few weeks ago, probably closing in on months at this point, I randomly got a notification from reddit about someone posting on /Jewish. They didn't say anything explicit, so I pressed the notification and I was met with the worst victimization and ignorance I've ever seen. I truly believed most jews would see this for what it is, and not let some racist maniac spoon-feed them propaganda and hate, but I was brutally and humbly proven wrong. They were mocking proPAL parades, hating on news anchors and civilians alike calling this a genocide, insisting that Israel has no other choice, saying "casualties happens in war", convincing each other that zionism is a good thing, and feeling sorry for themselves when friends and families cut contact because they said they supported Israel and saw this as the only solution. Some might have been genuine problems, idk, but for the most part, that subreddit seems to only be about hating the rest of the world because their great grandparents were killed. I know I sound like a complete asshole, but the world isn't antisemetic anymore - they are actively looking for it and then using that one person telling them to stop feeling so sorry for themselves as proof that everybody in the world wants to throw them back in gas chambers.
I commented on my personal once where I mentioned that judaism and zionism are two separate things and got downvoted to oblivion. Someone replied saying that my comment was very much exactly what they too feel, but I got downvoted *simply because* I referred to them as separate entities. That is another criticism they've recieved lately; the pure idea of zionism is on the complete opposite side from what Judaism stands for. I've seen so many of the members there calling Jews protesting against Israel "self-hating" and traitors.
I've also made so many replies that I never sent because I know for a fact they would do anything in their power to ban me from ever using reddit again, and I wouldn't be surprised if I got doxxed and harrassed IRL from it. I saved them all, though. I found that it was kind of therapeutic to get it out, but it still bugs me that I never found a way to say it to them. I once also made a post about my rage for their behaviour connected to this genocide, but I thankfully stopped myself before I posted it. I'm so enraged by their sheer ignorance and hypocritical behaviour, all the while Gaza is still being eradicated and slaughtered, war crimes happening day in-day out, inhumane atrocities by the IOF being posted and hailed, and they have the audacity to say that they are the victims? That Israel has no other choice but martyring tens of thousands of CHILDREN? Starving the entire Gaza Strip, segregating West Bank, literally teaching their young in school to hate and attack arabs? That last one might not be true as I don't speak Hebrew or Arabic, so anyone could've just made up the translation, but I still feel it's worth mentioning in case it actually *is* real.
My point is that the guts they have to claim to be so moral, yet still be so unfaced from what's happening in Gaza is beside me. Sure, for those living near the Gaza wall, I'm positive that hearing bombs and screams were traumatizing as fuck, but to then leave for work the next day and claim that "shit happens"? It's insane! It's inhumane. They can leave whenever they like, children can play football (soccer) in the streets and not having to worry about shit, hotels and restaurants with 5-star ratings thriving, plants and flowers still blooming, absolutely no threats on a daily basis. The fact that people are still calling this a war, something necessary, is beyond devastating to me. There are millions still siding with zionism, claiming there's nothing wrong with the belief that you have an innate right to some dirt simply because your holy book says that thousands of years ago, your religion lived there, and simply because of that religious fact you are rightfully owed thousands of young lives, the death of an entire country with its own culture, just to feed the irrational religious political system? How in God's name has that ever, *IS* that still okay? If Muslims were the ones saying that shit, they would've been completely destroyed by now, today's generation wouldn't know what the fuck Islam was. They are still being slaughtered though, because they're saying it's *not* okay. How is that not racist again?
My brother and I got into a heated argument a few days ago about this. I am very much *for* Palestine to have human rights and to own their own land - he is very much *against* "ugly blackies" having any rights because they're *not* human. Boi when I tell you I got so angry I started crying. And the worst part about that fight? He claims that Jews aren't any better, however they still deserve to defend themselves against children running on the beach. "But Hamas-" is so over-used and outdated by now, it just proves that he doesn't follow up on statistics and evidence. Even if there only were one-sided news (from Gaza), the fact that the ICJ ruled Israel's actions a genocide and war crimes still proves everything he claims to be "n*****'s propaganda". And the fact that he so underminds my autism and *need* for factual evidence before discussing it also goes to show that he genuinely does not care about anything other than the black "terrorists" being eradicated. I said "So you're not just a racist, you're just plain racist?" he just scoffed and looked at me as if I just said the most nonsensical bullshit gibberish ever, practically saying "I'm not gonna say anything, but it really took you that long to realise?" Either that, or he actually didn't comprehend the words coming out of my mouth, like it was a foreign language or something. Because he genuinely does not have a single reason to be racist.
He can't even blame suicide attacks because 1) not all are carried by muslims, and 2) between 1981-2015 around 45,000 were killed by suicide attacks worldwide, where in 2019 the total death toll was only 1,699 more than amount of attacks; whereas in Gaza, between Oct 7 to present there are about 34,000 confirmed palestinian deaths, and assumed around 42,000 with unconfirmed deaths. If, in 36 years, "muslim terrorism" killed about the same amount as Israel has in almost 8 months, how on earth are Arabs the terrorists?
And I've also seen the argument that 30,000 is nothing compared to the total population in Gaza, as if that makes it okay. I will, again, make example of The Holocaust. When 30,000 Jews were martyred, people were already catching on, and this was without the technology we have today.
How have we been allowing this to happen to Palestinians *with* our technology today? Why haven't people been doing more; striking our jobs, cummute chauffeurs striking, proper permanent boycotts, more coverage from news anchors and private people alike? Even if it is to officially reclaim your love for white supremacy, you're still talking about it. Why are people still not reading up on this? Why does millions still not know that this *didn't* begin on October 7th? And why are there still those who claim that the past doesn't matter today? I have so many questions, and if I do get an answer I will only end up with more questions. How hasn't the world stopped over this? Why are people so okay knowing that there are children being intentionally murdered every single day? How can you go to work and talk about Dave's new tie? Or your 6 year old's birthday party with 15 other 6 year olds? Hasn't it crossed your mind that if the roles were reversed, your precious princess would be the one burried under tons of rubble, dying slowly while simontaniously starving, dehydrating, suffocating and crushing, and *knowing* that absolutely no one cares because you're [skin color] and it's normal for your kids to be horrendously massacred? "Oh but the Taliban-ISIS-Al Qaeda" OKAY so what are you gonna do to help save innocent lives and suffering??? How are you gonna contribute to STOP these organizations that have manipulated and murdered to rule their country and are intentionally making the citicens miserable? Are you even aware that your own govurnment is essentially the same fucking thing, just disguised as a well dressed, polite gentleman? Aren't you sick of all those ads on TV showing brown children with flies in their eyes? Or your mama telling you to think about the starving children in Africa? Because I am.
I am so sick and tired of how inhumane humans have come to be. You don't see animals (and I'm trying my best to not mention how humans *are* animals, guess I failed) intentionally kill another animal simply because they're that animal. They kill prey; polar bears kill seals, seals kill penguins, penguins kill fish, fish kill amoebas, and you can get to that result from absolutely everything. What you don't find as a natural event is a golden, brown mane lion attack and kill an albino lion simply because it's albino. You don't see a school of fish swim away from one with two heads, because "*omg Jared is such a freak with his two heads*." So why the FUCK DID WE START DOING THAT? Where did this hunger for power come from? You *will* see a female lion tell the king that enough is enough, and he *will* accept that. I could go on and on for DAYS if I got the chance, but I don't wanna get too off topic here.
I've started a list of all the universally illegal shit Israel has done, and once I'm satisfied with it, I'll make one comparing Israel to Palestine, and then Arabs/Muslims as a whole. I can guarantee that I will still hear "on-sided sources" still, or "You can't trust Wikipedia!" Have you ever tried to edit or create an article on Wikipedia? I have, and I had to confirm that I had a degree or a current valid work ID to prove that I was elgible to speak on the topic. I tried to make a site for myself... Sure, there are more trustworthy sites, but even in a discussion about wether or not being trans is a mental illness, where I quoted and linked all of the most well known official sources like WHO, I was still slapped with "but this shady ass article from a random Deutch website that explicitly says everything I've said, yet still isn't actually saying the same thing because I misquoted and mixed the words to form my own sentence says that it is" when they literally linked a website called "disabled world". I will say though, I agree with that name. Today's world is so non-funtional for neurotypical, hetero, white MEN, it's no fucking wonder everyone else are classified as disabled or whatever. Also, on that disabled topic, if you've made it this far, please don't say "differently abled". A quote unquote quote (heh geddit? cuz it's rephrased and I don't have the book near me rn to directly quote) from Devon Price's "Unmasking Autism" that I really like: "You wouldn't say "a person with Asianness", you'd say "an Asian person"." We are disabled because today's world isn't made for us, and for the most part isn't even accomodated or accessible to us. We are different, yeah, but literally everyone is. We just got that term because we can't do the same things as you (assuming you're neurotypical) without aid. We are able, just not like you. Of course, if an autistic person tells you they prefer "person with autism", listen to them! But most of us embrace it as a part of us because we can't just get rid of it. Autism is what make me me, I wouldn't be me without my autism, so I *am* autistic, for better or for worse. :)
I find it kinda ironic that I started this as a venting about a lot of Jews' hypocritical behaviour, and now ending up on autism. Yaknow, cuz Dr. Asperger during WW2 experimented and tortured autistic people, and found out that some where more alike him than others, which then coined the term Aspergers for the Autistic Community.
Anywho, I feel better now, so thanks for letting me vent a little (a lot). I want to finish off by restating my intro; I have not, and will not tolerate any hate, racism or discrimination towards any religion, ethnicity, nationality, culture etc. This post is not intended as a rant about how aweful jews are, because they're not. I just wanted to air some frustration over their behaviour regarding I/P genocide. This is also not about *all* Jews, but that's the same discussion as "not all men" so I'll leave it at that.
I will delete this account in a week, so if you have any questions, be fast ig. If you find I've mis-phrased, used irrationally insensitive wording or any other complaints that calls for a repost, I will fix it and post an updated version. My DMs will also be available if that should be of interest, but I will not be responding to hate or personal attacks for my opinions. If the issue is my wording, again, tell me and I'll fix it.
At this point I've written so much that I don't remember if I found anything myself that I figured was worth fixing, and I've proof read it so many times that my eyes are crossing and giving me a headache lol
Gosh I'm scared of posting this. I don't want anyone to read this and think I support what A. H. did in 1940 cuz I cannot begin to describe my hatred for that man

submitted by Iam-scared-of-myself to confessions [link] [comments]

2024.05.19 08:04 Familiar_Mind624 Does anyone else not believe the study that “most ADOS are 25% European”?

I am black and white, however I was adopted into a black family. Well my adoptee mother is multiracial but phenotypically black. She has two mixed race parents. Her father is part Irish, part Native American and black, and her mother is part Native American, and black. So they say. My adoptee father is as black as one can get, his family has strong Cameroonian roots and the whole family is darker skinned, so my blood siblings and I stuck out like a sore thumb. They had been in the south for generations, back to slavery times yet mixing seemed to happen very little. I’m not even over exaggerating when I say there was only one lighter brown skinned cousin in the whole family.
Every time mixed people are brought up into the conversation online, usually with mixed celebrities with a black parents and a black/white mixed parent, whether they are black or mixed is debated. Most black people seem to have no problem labeling them as black because “they are like 75% black and we are all on average 25% white anyway from slavery”..I along with other mixed race people would disagree and try to convince them that they are still mixed race. One response I hate is “by that logic we are all mixed then…studies show African Americans are 25% European on average..you know how many of our ancestors were raped?” Rape definitely happened on plantations..but the study seems off. I have some questions about it.

Where was this study done? That’s VERY important. If this study was done in west Louisiana with creole populations, Virginia, or Texas… then I would believe that the data was made up of mostly multiracial African Americans with heavy mixed roots which do NOT make up the majority of the ADOS population. I’m from down south and a lot of black people down here don’t have much admixture, especially not in the Carolina’s, Georgia or florida(where lots of Haitian immigrants are).
Slavery impacted ADOS genetic diversity…but for most to be 25% European? If all of your grandparents are black and your parents are black all with very little admixture I don’t think the European dna would be that high from slavery. Sure dna isn’t equally distributed however it doesn’t just stay at such a high percentage for over 7 generations either unless it’s biracials marrying and having children together every generation. 25% is ALOT.
I believe Henry Louis gates jr. did this study. He himself is a multi generation mixed person, he tested 50% European.

How do you feel about this study? Do you think people only use this argument to silence us? Or take away the multiracial identity? Do you think it’s accurate? Phenotype and genotype don’t always match up but I doubt most are less than 98%-83% African on average.

submitted by Familiar_Mind624 to mixedrace [link] [comments]

2024.05.19 07:43 mmaguy123 Anyone else feel a moral/spiritual conflict with fitness and non veg consumption?

Hey all, I’m actually not from India but I am a Hindu. Fitness is also a very important part of my life.
As you all may know, in fitness, the hype behind an animal based diet is growing. The benefits on optimization and performance, and ditching all the processed food as well vegan plants that are high in anti-nutrients.
However, I’ve recently been trying to grow in my spirituality and feel a huge conflict. On one hand there’s a part of me that wants to eat these steaks and live like our ancient cavemen ancestors. On the other hand I want to be moral and find my pure self.
Asking if any of you have gone through something similar.

submitted by mmaguy123 to Fitness_India [link] [comments]

2024.05.19 07:37 Stage-Piercing727 Best Car Clocks

https://preview.redd.it/x9ncecjglb1d1.jpg?width=720&format=pjpg&auto=webp&s=c2495ec0309ff6866e1dc4bf36961a1598c47b54
If you're looking to add a touch of sophistication to your car's interior, look no further than our roundup of the best car clocks on the market. These stylish and functional timepieces not only keep you on schedule but also enhance the overall aesthetic of your vehicle. From sleek digital displays to traditional analog faces, we've got you covered with our top picks for car clocks.

The Top 10 Best Car Clocks

High-Quality Mini Car Clock with Digital Display - Youngfly Mini Car Clock: Impressive durability and easy time setting make it the perfect choice for your automotive needs.
Solar-Powered Car Clock with Adjustable Brightness - Illuminate your car's dashboard with Novinex's Solar-powered, Heat-resistant, and Vibration-sensitive Car Clock - the ultimate bright and practical accessory for your automobile!
Multifunctional Waterproof Car Clock with LED Display - Upgrade your vehicle's dashboard with a stylish and durable Car Electronic Clock, offering waterproof and dustproof design, one-button operation, and multiple time display modes.
1940 Chevy Car Analog Clock with Blue Display - Revitalize your vehicle's dashboard with the stylish Dakota Digital 1940 Ford Car Silver Analog Clock, featuring a blue display and seamless integration with the VHX gauge kit for an unparalleled instrumentation experience.
Car Analog Clock with Blue Display - An authentic-looking, analog 1955-56 Chevy car style clock with a silver alloy face, white display, and LED backlighting, designed to perfectly complement your VHX gauge kit.
1955-56 Chevy Car Analog Clock: Vintage Style for Your Vehicle - Elevate your classic 1955-1956 Chevy experience with the Dakota Digital VHX VLC-57C-K-BF analog clock, featuring LED backlighting, lighted needles, and seamless integration with VHX gauge kits.
Classic Racing Car Analog Clock - Upgrade your 1958 Chevrolet Impala with the Dakota Digital VLC-58C-IMP-S-B clock featuring a stylish silver alloy face, a white display, and perfect complement to VHX gauge kits.
1957 Chevy Car Vintage Digital Clock - Experience the sleek and stylish 1957 Chevy Car Digital Clock, featuring a black alloy style face with a white display, perfectly complementing any car interior.
Vintage Chevy Car Analog Clock - 1951-52 Style - Elevate your car's style and precision with the Dakota Digital 1951-52 Chevy Car Analog Clock, featuring a sleek black alloy face and clear white display, providing a modern fusion of vintage charm and cutting-edge technology.
Clear LCD Car Clock with Durable Adhesive - This KANBIT Small Digital Car Dashboard Clock provides a clear LCD display with easily readable time and date, while its strong adhesive ensures a secure fit for any flat surface.

As an Amazon™ Associate, we earn from qualifying purchases.

Reviews

🔗High-Quality Mini Car Clock with Digital Display

https://preview.redd.it/3jghqrxglb1d1.jpg?width=720&format=pjpg&auto=webp&s=7f9fa2a01404b1d2ae8d7a33a51036543d51ecaf
Incorporating the Youngfly Mini Car Clock into my daily life has been nothing short of a breeze. The auto car truck dashboard time self-adhesive bracket's sleek design and exquisite craftsmanship make for a perfect fit on my vehicle's dashboard.
Navigating through the various settings is a breeze; the bottom button for month and day, and the top button for hours and minutes. Once the desired time is set, pressing the top button once returns to normal time.
This electronic digital clock stands out with its automotive-grade specifications, featuring a PVC material and a 1Pc x AG10 button cell battery that comes included. Despite the minor difference in color and dimension due to varying light and screen settings, this car clock is a durable and reliable addition to any vehicle's interior.
The mini car clock comes packaged safely, ready to be installed effortlessly on your dashboard, thanks to the included double-sided adhesive product. Overall, the Youngfly Mini Car Clock has proven to be a worthy investment in convenience and style.

🔗Solar-Powered Car Clock with Adjustable Brightness

https://preview.redd.it/ifu9soahlb1d1.jpg?width=720&format=pjpg&auto=webp&s=848cfc520754fe91c81b2ed7c65d8e59b10b69fe
As someone who's used the Novinex Car Clock daily, I've discovered its amazing solar-powered design. Not only does it come with a rechargeable battery, but it also has a solar panel and high temperature resistant battery power supply that functions without any wiring. The practicality of the clock shines with its vibration sensor, which automatically turns it on when any vibrations are detected in the car.
The heat resistance factor truly comes into play the moment you stick this digital clock onto your car's dashboard. It's made of high-temperature resistant material, perfect for the internal environment of a car without any worries of exposure during hot summer days.
The Novinex Car Clock takes pride in its brightness adjustment feature - a high temperature LED digital tube display. It allows the screen to be visible both in daytime and in the nighttime. It even adjusts itself automatically to provide the right brightness for the time of day.
The shading hood design on the clock is a fantastic feature to make the car clock viewable even under strong sunlight. If I were to list a con, it might be the price of this clock; however, the advanced features, practical usability, and sleek design seem to justify its cost.

🔗Multifunctional Waterproof Car Clock with LED Display

https://preview.redd.it/a9tiwqqhlb1d1.jpg?width=720&format=pjpg&auto=webp&s=7ab3557691873d347c1b08423e3063e09b471c10
I've been using this nifty Car Clock Dashboard Multi-functional Vehicle Electronic Clock for a while now, and let me tell you, it's a game-changer! The waterproof and dustproof design makes it perfect for my messy car, ensuring it can withstand any spills or messes.
One of the standout features is the one-button operation, which is incredibly practical and user-friendly. You can easily switch between time division, second mode, date mode, and timer mode with just a single button press. The LED digital display is also a great addition, making it easy to read in any lighting condition.
However, there's one minor drawback: the wide supply voltage range can be quite overwhelming for some users. But overall, this Car Clock Dashboard Multi-functional Vehicle Electronic Clock is an excellent addition to any car, providing both functionality and durability.

🔗1940 Chevy Car Analog Clock with Blue Display

https://preview.redd.it/wfei8e0ilb1d1.jpg?width=720&format=pjpg&auto=webp&s=c60068139bbf8e718cc09207a09094fcbb6d2622
The Dakota Digital '40 Ford Car Clock is a stylish addition to any dashboard, boasting a sleek silver alloy style face and a vibrant red display. I found the product to be an easy installation, simply plugging into one of the CAT-5 network jacks on the VHX controller. However, it's worth mentioning that the clock needs to be synchronized with the VHX system, so it becomes a standalone clock option.
The clock's LED backlighting and lighted needles match the VHX instrument system, giving it a cohesive look within the car. One of my favorite features was its separate constant power input harness that allows the clock to continue running even when the key is off. However, the clock does require this harness to function, which can be a minor inconvenience for some.
Overall, the Dakota Digital '40 Ford Car Clock is a visually appealing and functional addition to any dashboard, though the requirement for a separate constant power input harness is worth considering.

🔗Car Analog Clock with Blue Display

https://preview.redd.it/w034bmbilb1d1.jpg?width=720&format=pjpg&auto=webp&s=4d0ec9f11dab5b4d14e9855321d952c4e7e25c2f
As a car enthusiast, I couldn't resist giving the Dakota Digital 1957 Chevrolet Car Silver Analog Clock a try. The moment I saw its silver alloy style face with white display, I knew it would be a great addition to my classic Chevy. The clock's LED backlighting and lighted needles perfectly matched the vintage look of my dashboard.
While using it, I discovered that it only works alongside a VHX system and can't be used as a stand alone clock. This limitation was a bit of a downer, but the clock's ability to display the current time while I'm driving made up for it. The time is set through the VHX system, and it quickly syncs with the built-in clock upon initial power-up.
Considering its compatibility and unique design, I think this clock would be a great addition to any classic car enthusiast's collection. Just remember to connect the constant power input harness for the clock to continue running while the key is off. Overall, I'm happy with my experience, and the clock has added a touch of nostalgia to my daily drive.

🔗1955-56 Chevy Car Analog Clock: Vintage Style for Your Vehicle

https://preview.redd.it/gbhldtpilb1d1.jpg?width=720&format=pjpg&auto=webp&s=2eeb9fe2c5c4f48adf2e14b090f034cb77990e71
I recently had the chance to use the Dakota Digital 1957 Chevy Car Analog Clock, and I must say, it's a unique and eye-catching addition to any car. This clock's black alloy style face and white display give it a classic yet modern twist.
One feature that stood out to me was its LED backlighting and lighted needles, which perfectly match the VHX instrument system. It's the perfect complement to my VHX gauge kit and adds a touch of sophistication to my car's interior.
However, there were a few drawbacks. Firstly, the clock will only work alongside a VHX system and requires plugging into one of the network jacks on the VHX controller. Additionally, it cannot be used as a standalone clock and relies on the VHX system for time syncing.
Overall, the 1957 Chevy Car Analog Clock from Dakota Digital is a stylish and functional addition to any car. Its sleek design and VHX compatibility make it a worthwhile investment for car enthusiasts.

🔗Classic Racing Car Analog Clock

https://preview.redd.it/4ykgvc2jlb1d1.jpg?width=720&format=pjpg&auto=webp&s=2396efa92f25652b80af53f64bd30d4110c6ab1a
Imagine cruising down the road in your '58 Chevy Impala, the radio playing your favorite tunes, when all of a sudden, you glance over at your dashboard to check the time. That's when the Dakota Digital 1958 Chevrolet Impala Silver Analog Clock with Blue Display comes into play. This sleek, silver alloy style clock isn't just a stylish addition to your car, but it also complements your VHX gauge kit perfectly.
One of the most striking features of this clock is its traditional analog style clock face, which gives it a classic touch that seamlessly blends with your car's interior. The LED backlighting and lighted needles provide an impressive contrast against the blue display, making it easier to read the time even in low-light conditions.
However, there's a catch. This clock will only work alongside a VHX system. It's not a standalone clock. But once connected, it's a piece of art that blends perfectly with your dashboard, providing not just a clock, but a statement.
Remember, this is more than just a clock. It's a testament to the innovative spirit of the Dakota Digital VHX Series. It's a piece of machinery that has revolutionized the instrumentation industry. And yes, the time does change whenever you switch on the ignition, but hey, that's part of the charm.
In a world where technology often dominates, this clock serves as a gentle reminder of the beauty in traditional design, all while keeping you on track with time.

🔗1957 Chevy Car Vintage Digital Clock

https://preview.redd.it/x82twdijlb1d1.jpg?width=720&format=pjpg&auto=webp&s=af19d9fcffd976ac63b5ab2099474696e6e52be5
During a recent road trip, I came across this sleek 1957 Chevy Car Digital Clock in a local antique store. The black alloy style face and white display perfectly complemented the vintage vibe of my car. This retro timepiece not only added a touch of nostalgia to my vehicle, but it also served as a reliable way to keep track of time while on the go.
One of the standout features of this clock is its readability, even in direct sunlight. The white numbers against the black background make it easy to see at a glance. Additionally, the chrome bezel adds a touch of luxury and sophistication.
Despite these positives, there were a few areas where this digital clock could use some improvements. For instance, I noticed that the clock sometimes took a moment to adjust to a quick lane change. Additionally, the gray face seemed to blend in with the car's interior, making it a bit harder to spot from a distance.
Overall, this 1957 Chevy Car Digital Clock is a great addition to any vintage car enthusiast's collection. It offers both style and functionality, making it a valuable investment for those looking to add a touch of old-school charm to their ride.

🔗Vintage Chevy Car Analog Clock - 1951-52 Style

https://preview.redd.it/u7ya0pwjlb1d1.jpg?width=720&format=pjpg&auto=webp&s=2e00ef9999e9c7ef01865f2007ed7b9b19218337
I stumbled upon this 1951-52 Chevy car clock with a sleek alloy style face, and boy, does it add a touch of nostalgia to my ride! . The white display is super clean, making it easy for me to tell the time in any situation. The clock even has a neon-colored backlight that illuminates the numbers beautifully.
But, the installation process was a bit of a challenge, taking me a few hours longer than expected. And although the build time for this clock is just around a week, it's not the fastest turnaround on the market. Overall, I'm happy with my decision to add this stylish car clock to my Chevy, and it's definitely a conversation starter! .

🔗Clear LCD Car Clock with Durable Adhesive

https://preview.redd.it/ougiihdklb1d1.jpg?width=720&format=pjpg&auto=webp&s=24a532052a682f5b340ef0a55d70a534838b8119
When I first received the KANBIT small digital car dashboard clock, I was impressed with its sleek design and clear LCD display. The large, easy-to-read numbers made it perfect for keeping an eye on the time and date while driving. But what really stood out was the durable adhesive on the back of the holder.
It stuck firmly to my dashboard, and I could still easily adjust the clock without removing it. This little clock was not only convenient, but it also added a stylish touch to my car's interior.
Overall, the KANBIT dashboard clock was a great addition to my daily life, enhancing both the function and appearance of my vehicle.

Buyer's Guide

None

https://preview.redd.it/m2bcbvpklb1d1.jpg?width=720&format=pjpg&auto=webp&s=195845e7cfcb5f5b6f34cfccafe4328d7f666503

FAQ

Why do I need a car clock?

Car clocks can provide a variety of features including dual time displays, stopwatch, countdown timer, and more. They can also help you keep track of time while driving, and they often come in attractive designs to match your car's interior.

https://preview.redd.it/sohsqq8llb1d1.jpg?width=720&format=pjpg&auto=webp&s=b876cb33e67121b47a5221bbfcaeedefa8af7023

What is a dual time clock?

A dual time clock is a car clock that displays the current time in two separate time zones. This feature is useful for travelers who need to keep track of time in different locations.

What is a backlit display?

A backlit display is a feature that allows the car clock to be visible even in low light conditions. This can be helpful when driving at night or in areas with poor lighting.

https://preview.redd.it/rszcrjhllb1d1.jpg?width=720&format=pjpg&auto=webp&s=1e0b4c792e3f76492ce37594d11d678289fd2ec9

What are the benefits of a stopwatch?

A stopwatch feature on a car clock can be useful for timing races, workouts, or any other activity that requires accurate timing. It is often a simple feature to use and can be a fun addition to a car clock.

Can I mount the clock on my dashboard?

Most car clocks are designed to be mounted on the dashboard using a suction cup or adhesive. However, it is always important to read the manufacturer's instructions to ensure proper and safe installation.

https://preview.redd.it/eml8bn2mlb1d1.jpg?width=720&format=pjpg&auto=webp&s=ca3be7c9a8fab621f558c321d46883dc1291c103

What is the difference between an analog and digital car clock?

Analog car clocks display time using a dial with hour and minute hands, while digital car clocks use digital numbers to display time. Each type has its own advantages, with analog clocks often being seen as more classic and digital clocks being more accurate and easier to read.

How do I replace the battery in my car clock?

Replacing the battery in a car clock typically requires unscrewing the back cover, removing the old battery, and then inserting the new battery in its place. Always consult the manufacturer's instructions for specific details on your car clock model.

Are car clocks waterproof?

Not all car clocks are waterproof. It is always a good idea to check the product description or manufacturer's specifications to determine if a clock is designed to be used in wet environments.

What is the average lifespan of a car clock?

The lifespan of a car clock can vary depending on the brand, quality, and usage. Generally, a well-maintained car clock should last several years with normal wear and tear.
As an Amazon™ Associate, we earn from qualifying purchases.

submitted by Stage-Piercing727 to u/Stage-Piercing727 [link] [comments]

2024.05.19 07:27 Pure_Supermarket_82 May 19th, 2024, 12:56

My birthday, hooray, May 19th. Wow another half year, gone within an instant, fucking appalling. How time can move faster than I can exist is unbelievable, whatever, fuck it, i'm useless. I live vicariously throughout the trenches of Reddit's brain rot and isolate myself within the walls of my rusted cell, only escaping restraint when I feel like existing. My life is a fucking joke, I'm barely pubescent and my life feels like it's already done, I don't know how much longer I can take. Barely beginning my life and already have a criminal record, pathetic, a disappointment is how you could describe my life. I'm a fucking loser, I just get the short end of the stick every time, every single time in my life, i genuinely can't describe a moment in my life where i didn't. If you're wondering, the charges were for threats against my school, yeah, I'm not the victim, I'm a fucking piece of shit, but I'll still play it. These manipulative, self-centered, downright malicious and utterly foul robots known as the "Feds" really fucked my life over, they arrested me, threw me in a cell for a day, made me sign some bullshit forum "don't be around guns", "don't go to school" yeah yeah, fuck you bums. Yeah I made the threats sure, but then they say shit like "express your feelings!" "talk about your thoughts!" except what they don't say is that when you do we'll handcuff you, throw you in a police cruiser and refrain you from going to school, so any chance of you ever having a meaningful education or occupation will be utterly erased, so that's great, I'll just be the part-time janitor of a condom factory. That's ridiculous. The teachers at my school always target me, once I got sent to the office and had to work in that miserable cesspool for that day for eating the rest of my chocolate bar I had at lunch on the way outside, unfucking believable, or when I got sent to the office for "getting in a fight" some fucking alien headed kid twice my size tried to fight me because I "was kicking rocks at him" (I wasn't, the worms in his brain were probably just eating faster that usual). And so I attempted to defuse the situation by asking him what the fuck he wanted to fight for and then eventually walked away. I went to the office because the kid's brother said he would jump me and the office looked me dead in the face and said "yeah, but you were on the wrong side of the yard" (this was during covid and there were sides of the yard we had to stay on and yes, i was on the wrong side but that had nothing to do with him antagonizing me and wanting to fight me). Put yourself in my shoes here, some kid you don't know wants to fight you and then his brother says he'll jump you, so you go to the teachers for help and they pretty much just say, sorry lil bro, not today. So, the teachers hate me, the students hate me and everyone expects you to go to school everyday, be on your best accord and not lash out... Do you not think that affects me mentally? So yeah, just arrest me and not solve the violence and fighting problem nor drug problem at my school and just fuck me over. fuck you, fuck the feds, fuck life, fuck everything, you'l all be sorry and regret this shit.

submitted by Pure_Supermarket_82 to SuicideWatch [link] [comments]

2024.05.19 07:24 PinballPounce A comprehensive guide to sound-deadening a 2018 Third Gen Mazda3 Hatchback

This will function as a one-stop guide to sound deaden the 3rd generation Mazda3. I believe it will be useful for any previous or next-gen Mazda3 owner, or anyone with a CX-30, as these platforms share many components.
Like others undertaking this project, I did a ton of research on sound deadening, the process, and the products first before jumping in. I would encourage anyone pursuing the same project to read through the links I’ve included in this write-up as they should give you all the information you need to sound-deaden your car in a comprehensive, easy manner, without having to do the weeks of research I had to do.
Pre-reading:
If you haven’t already, read through this thread for background as this is a solid, comprehensive write-up.
https://www.mazda3revolution.com/threads/sound-deadening-my-17-mazda-3-bn.242072/
Materials Needed:
1. Butyl-based mat to apply first as your base layer
I used 72 square feet to do the entire car, including hood, wheel wells, full interior, rear hatch area, and all doors. I did not do the headliner.
Total cost: $200 CAD
I used 1 box of 2mm (80 mil) Kilmat, and 1 box of 2.5mm Amazon branded butyl sheets. I found the Kilmat had better adhesion and was easier to cut and work with, because of the smaller sheet sizes, so I used this for tight spaces and the doors. The Amazon stuff was great to apply to large areas such as the floor of the vehicle, because I would just stick one entire sheet down and be done with it. It’s also slightly cheaper than the Kilmat.
Other brands: Silless, which manufactures the closed cell foam, also makes this stuff for a reasonable price.

2. Closed cell foam as the second layer
I used 100 square feet.
Total cost: $200
I did a LOT of research and shopping around to find the best balance between price, value, and performance of closed cell foam. I ultimately landed on using Siless Liner 157mil (4mm) closed cell foam which I found on Amazon. Noico is also another brand that makes this stuff for slightly more cost. These come in boxes of 51 square feet for about $100. I thus bought two boxes of the stuff. I did end up with leftover product, which I have saved as it can be used to stick on anything else that causes noise such as a furnace, washing machine, etc along with the leftover butyl mat.

3. Rubber-based floor underlay as the final layer
I used a 100 square foot roll of Technoflex Underlayment Acoustic Membrane, 2mm thickness.
Total cost: $85
Product link: https://www.rona.ca/en/product/technofloor-technoflex-underlayment-acoustic-membrane-thermal-insulation-4-ft-x-25-ft-x-008-in-100-sqft-rubber-material-black-m2000-100-73015020
Alternate link: https://technoflexintl.com/en/product/technofloor-acoutstic
Other products I considered, but chose against as the Technoflex is thicker

In Canada, you cannot find mass loaded vinyl. My goal was to find something relatively cheap and functional. I went to underlay because it’s sold in bulk and there are many products out there to compare effectiveness. Flooring underlay also has specific requirements in order to carry a particular sound deadening rating. It’s also rubber-based, like vinyl, so I figured I would just double up on layering as I had enough product to do so. I did end up doubling up the layering in most places and had leftover product.
Please note, this product is not adhesive. You lay it down like a blanket and you need to cut it to fit in tight spaces. Thus, I did not use it in vertical areas like the doors. I only used it on the floor and trunk of the vehicle. I am not technically inclined enough to adhere or screw it on the doors, but there are other people in the links on this thread who have done so, so depending on your skill level it is certainly possible.

All Tools Required

Socket set with 10mm socket and a Phillips screwdriver. I purchased a full socket set because I did not have one and found one on sale.
E-torx socket size 12 to remove the front seats. I just purchased a set of 8 for $20
Trim removal tool and plastic clip replacements, approx. $20. Extremely useful!!
- https://www.amazon.ca/dp/B01N9AL149?psc=1&ref=ppx_yo2ov_dt_b_product_details
- The metal trim removal tool is worth its weight in gold. Trust me, there are a LOT of plastic trim pieces to remove, and this tool makes them very easy to remove properly without breaking anything. All cars nowadays use plastic trim, so it’s a worthwhile purchase if you’re ever going to do work on any future car as well.
- I purchased the set above because it came with a whole array of trim removal tools as well as a huge variety of replacement plastic trim pieces. I ended up using a couple pieces that broke when I did the doors. The kit has everything you may need for most vehicles, including our Mazdas.
Rubber roller, $12. Useful for rolling down the butyl mat and closed cell foam.
- https://www.amazon.ca/dp/B01N9AL149?psc=1&ref=ppx_yo2ov_dt_b_product_details
Do yourself a favor and get some gloves. I used my bare hands for about 50% of the time, and they were sore, and had little nicks and cuts all over them by the time I was done. Much easier with gloves.

Skill Level
I have a general interest in cars but the most technical work I’ve ever done are oil changes and tire swaps. This was the largest and most technical project I ever embarked on. I work an office job, so I don’t even work with my hands a lot. If I can do it, so can you (as long as you set aside the time and have the proper tools).

Results
I did not take before-after videos, as that has been captured by videos on Youtube as well as people who have measured the noise levels in the threads below. All I can tell you is that this does work. In my opinion, the project even for a newb like me is totally worth it. For less than $500, and a couple days of work, you can make your Mazda feel like an entirely different vehicle.

Now, sounds and vibrations are barely transmitted going over rough roads. The car feels so much more planted and stable when going over bumps. The audio system sounds better. The doors close with a rich-sounding ‘thunk’. By far the biggest improvement is getting a whole new level of isolation within the car, which makes long trips so much more tolerable and the daily commute so much more relaxing. I would 100% do this again.

The project
Okay, let’s get to the project itself! I’ve broken up each area of the car into separate sections. As the write-ups below are fairly comprehensive, there is no need for me to reinvent the wheel.

Doors
This link contains pictures and instructions, very clearly detailed, on how to do the doors. I did the rear doors first to get used to working with all the materials, then the trunk, then the interior of the car. I would suggest following these instructions.
https://imgur.com/a/2018-mazda-3-sound-deadener-install-vE1o9Hi
Before taking apart your doors, also read through this thread as it contains some more details and information that you will find useful.
https://www.mazda3revolution.com/threads/sound-deadening.126105/?post_id=1624345&nested_view=1&sortby=oldest#post-1624345
This thread is also good to read as it is very detailed. It is for the previous generation, but the door design has not changed that much compared to our generation.
https://www.mazda3revolution.com/threads/cheaply-and-effectively-sound-deadening-your-2010-2013-mazda3.111385/

Wheel arches
Use these links and instructions for the wheel arches
https://www.mazda3revolution.com/threads/sound-deadening.126105/page-2
As well as the Imgur gallery from the Doors section for some more pictures.

Trunk
This is the easiest part of the whole project. If you’ve read the threads above, you don’t need any help with this. I did not do the hatch door. I do not think that is worth it, because if your trunk area is well insulated and you have your rear seat up, there’s not a lot of noise that’s going to get through the hatch door.

Interior
This is the part of the project that I had to figure out on my own, so I want to give several tips that will make it easier if you’re doing this.

~1. Removing the interior carpet:~
First vacuum the carpet.
You don't need to remove the entire console to get access to the majority of the floor. To remove the interior carpet, first remove the rear seat, then the front seats, then the interior plastic trim, and finally there are some pieces of Styrofoam in the front wheel wells. You can pull up the carpet for the left side of the vehicle as you work on that side, then tack it all down, and repeat for the right side of the vehicle.

~2. Removing the front seats~
First, disconnect the battery using the 10mm socket. This is recommended by the manufacturer to prevent accidental discharge of the air bags.
If you have the E-torx size 12 socket, removing the seat bolts is a breeze. I zipped them right off. Undo the back bolts, then slide the seat to its rearmost position, then remove the front bolts. Roll the seat onto it’s back to access the harness, undo the harness, then remove the front seat either from the front or rear door. It doesn’t matter.
Go to this site and download the PDF that Anchorman posted. That is all you need to know to remove the front harness. It took me HOURS of searching the web to find a resource this good – there aren’t even any good videos demonstrating what the PDF shows. https://www.cx3forum.com/threads/drivers-seat-removal.17234/
This was both the easiest and hardest thing about the project. Where I got stuck was removing the wiring harness from underneath the seat. Don’t be like me and stick a screwdriver in there, because that can damage the plastic. Instead, simply lift the white tab, press the tab underneath, and the harness comes off nice and easy. The link above with the PDF by Anchorman is what I WISHED I had at the start. I hope this will make it much easier for you.
Don’t be worried about the airbag going off etc. Using the diagram in the PDF, it’s just 1 harness and it comes off super easy and clips back in super easy too. It’s idiot-proof. You won’t have any trouble.

~3. Remove the interior plastic trim~
Again, watch this video https://www.youtube.com/watch?v=Aat4kUanm9w to see how to remove the trim and in what order. It’s actually quite easy and easy to reinstall as well. Just remember that the front and rear passenger scuff plates go on last. The other interior trim, does not matter what order you reinstall it.
Another tip, when removing the furthermost front inside trim (i.e the fusebox cover) and its equivalent on the front passenger side, there is a plastic nut securing that trim in place at the very front of it. It’s hard to see in there. Simply reach your hand in there, find the nut, and lefty-loosen it all the way until it comes off. Easy peasy!

~4. Remove the carpet~
You can pull up the carpet one side at a time. I recommend starting with the left side. In one area only, I cut through my carpet in order to remove it on the rear passenger areas, where it is affixed underneath the front seatbelt holder. This is not a problem. It was just easier this way, and because that area gets covered up by plastic trim, it doesn’t matter if you cut through it to make your life easier.
Once the carpet is lifted up, vacuum underneath it to ensure you have a clean surface that your butyl will adhere to.

~5. Do the driver’s side first!~
The front left side of the vehicle floor is the hardest to do because you have to contend with the footrest, reaching underneath the steering wheel, and the gas pedal. I removed the accelerator pedal – it is just held in place by two 10mm nuts, and then an electrical harness that easily clips off. Remove it and set it aside. Then, lift the carpet and remove the Styrofoam. Use a needlenose plyer to help unclip the plastic portion holding the Styrofoam in place. I did not end up reinstalling that plastic piece, as I installed sound deadener where it would have plugged into the floor. No harm.
I suggest doing the driver’s side first because once you’re done that front left area, the rest of the car is super easy. So do this while you’re fresh. Try to cover as much as you can in the front wheel wells, because that is a significant area of incoming road noise. Be systematic about cutting the butyl and closed cell foam in the correct sizes here, as you will have to reinstall the gas pedal, the Styrofoam, and the carpet properly. The good news is that it’s all easy to reinstall. I didn’t have any trouble.
Once you’re done with the driver’s compartment, systemically work your way with large butyl sheets and closed cell foam through the rest of the car floor. There is no need to apply this stuff up where the plastic trim will be reinstalled, on the inside lateral frame of the car – if you do so, it might be more difficult to reinstall the carpet and the plastic trim. Just do the flat bottom floor only, and you can hold the carpet up to access up along the centre console as well. (Keep in mind this is written for someone with my skill level – i.e newb. If you are more advanced and know what you’re doing, then go ahead and put some butyl or CCM in the inside lateral area, the area otherwise covered up with plastic trim).
I did not go for 100% coverage. To do that would take a lot longer. I went for about 90% coverage with the butyl and closed cell foam, and the rubber Technoflex layers covered up pretty well 95% of the area.
When you are laying the material down, ensure not to cover the holes for the seat bolts. If you do by accident, no worries – just use a screwdriver to poke through them, and you can easily still thread the bolt through when you go to reinstall your front seats.
Repeat the same steps on the right side of the vehicle.

~6. Reinstall the plastic trim.~
First reinstall the carpet and ensure all the holes line up. Reinsert the plastic clips into the holes to hold the carpet in place. Then, reinstall the frontmost trim piece, ensuring it clicks into place, and finally screw the plastic nut on. You may need to lift the rubber insert around the door to replace the plastic trim properly – the rubber insert comes off and goes on very easily, it is very forgiving to work with.
Then, install the B pillar trim piece. Then, the inside rear trim piece. Finally, the scuff plates, front and rear.

~7. Reinstall the front seats.~
~8. Reinstall the rear cushion.~
~9. Plug in the battery again.~
You’re done! Go for a rest drive and let the results speak for themselves!

Final thoughts
I did not take pictures because I was too busy installing the stuff and there are plenty of pictures available on the various threads.
I did reach out to many people on the forum and on Reddit who have done this project and from everything that I’ve learned, I believe this should be all you need to know to do this project successfully.
It will take several days so set some time aside. Here are some rough estimates:

Trunk: 2 hours
Each door: 2-3 hours (first door will take longer, then each door after gets shorter and shorter)
Wheel wells: 2 hours
Inside Hood: 1 hour
Interior: 9 hours. Set aside a full day for this. You will want to take breaks in between steps. It took me from 10am to 8pm.

submitted by PinballPounce to mazda3 [link] [comments]

2024.05.19 07:23 ConsequenceSure3063 Best Capehart Record Players

https://preview.redd.it/d40n503uib1d1.jpg?width=720&format=pjpg&auto=webp&s=135b163f54b36dd266cf0aeeb01610fbf8da763d
Are you a vinyl enthusiast, or just starting your collection? Look no further! In this article, we'll delve into the fascinating world of Capehart Record Players. With a variety of models to choose from, we'll help you find the perfect player to elevate your listening experience. Read on to discover the features that make Capehart Record Players stand out, and how to choose the right one for your home or office.

The Top 11 Best Capehart Record Players

Arkrocket Retro Bluetooth Record Player with Turntable and Built-In Speakers, Brown - Experience the iconic style and unbeatable sound quality of the Arkrocket Discovery 3-Speed Bluetooth Record Player with retro turntable, built-in speakers, and removable legs for versatile placement.
Crosley Cruiser Plus Bluetooth Suitcase Turntable in Tourmaline - Crosley Cruiser Plus Turntable - A compact, stylish, and portable 3-speed record player with built-in Bluetooth, adjustable pitch control, and full-range stereo speakers for enhancing your vinyl and digital music listening experience.
Bluetooth Vinyl Record Player with Built-In Stereo Speakers, 3-Speed Belt-Driven Turntable, AUX, RCA & Headphone Sockets - Experience the ultimate vinyl listening experience with this Bluetooth enabled 3-speed belt-driven turntable, featuring built-in stereo speakers and various connectivity options for seamless playback of your favorite records.
Bluetooth Vinyl Turntable with 40W Stereo Speakers - The Arkrocket Cassini Vinyl Turntable offers a perfect blend of vintage charm and modern technology, featuring Bluetooth connectivity, sleek walnut finish, and 40Watt bookshelf speakers for a powerful, immersive listening experience.
Bluetooth Record Player with Stereo Speakers and Cassette Player - The Digitnow Bluetooth Record Player with Stereo Speakers provides a versatile listening experience with vinyl to MP3 conversion, cassette playback, and AM/FM radio, complete with a USB/SD encoding feature and remote control for seamless enjoyment.".
Retro Full-Size Jukebox Vinyl Record Player with Bluetooth and USB - Experience that 1950's nostalgia with Arkrocket Full-Size Jukebox Vinyl Record Player, a beautifully designed retro addition to your home featuring Bluetooth connectivity, USB, SD slots, CD player, and various playback options for a music-filled day.
Vinyl Record Player with MP3 Converter, Bluetooth, CD, and Cassette - DIGITNOW's Bluetooth Record Player combines modern technology with vintage charm, allowing you to play and convert vinyl records to digital formats with ease, all while enjoying a sleek briefcase design and versatile connectivity options.
Vintage Record Player with Built-in Stereo Speakers - The Digitnow! Turntable Record Player combines vintage styling with modern functionality, featuring 3-speed capabilities, built-in stereo speakers, and versatile USB and RCA output options for easy vinyl-to-digital conversion to WAV and MP3 formats.
Bluetooth-Enabled Stereo Turntable - Enjoy superior sound quality and ease of use with the Audio-Technica AT-LP60XBT-SV Bluetooth Stereo Turntable, equipped with automatic features and compatible with both wired and wireless devices, perfect for music enthusiasts and vinyl collectors alike.
BluetoothturntablePlayerforvinylrecordswithejectandfastforward, REC, DELfunction. - The Digitnow Bluetooth Record Player Turntable is a versatile vinyl-to-MP3 converter with 3 speed settings, built-in stereo speakers, and LCD screen. Ideal for vinyl lovers seeking a compact, easy-to-use, and feature-packed solution for their music needs.
Fully automatic vinyl turntable setup - The Dual CS329 Fully Automatic Plug & Play Turntable offers high-quality audio playback with its advanced features and uncomplicated design, making it a perfect choice for both vinyl enthusiasts and newcomers to analogue playback.

As an Amazon™ Associate, we earn from qualifying purchases.

Reviews

🔗Arkrocket Retro Bluetooth Record Player with Turntable and Built-In Speakers, Brown

https://preview.redd.it/b5tilx8uib1d1.jpg?width=720&format=pjpg&auto=webp&s=38fe181f35ff91847eb92bef068e2f29619d748a
Once upon a time, I stumbled upon the Arkrocket Discovery 3-Speed Bluetooth Record Player with Retro Turntable and Built-In Speakers. As a music lover who appreciates both the classics and new sounds, I was excited to see how this little device would perform.
Right out of the box, I noticed its sleek design and vintage-inspired charm. The removable legs made it easy to fit into any space in my home. Setting up the turntable was a breeze, and within minutes, I was jamming to some old vinyls.
The sound quality was impressive for its size and price range. While the built-in speakers aren't booming, they're perfect for a cozy room or study. The ability to connect my phone via Bluetooth has made it even more versatile, allowing me to stream my favorite digital tunes right alongside my vinyl collection.
However, there was one minor issue that caught my attention. The legs are made of adhesive upholstery, which began to separate after some use. A quick fix with glue restored its appearance, but I wish it had been made with a sturdier material.
Overall, I am thoroughly pleased with my Arkrocket Discovery 3-Speed Bluetooth Record Player. It's not only a great conversation starter but also an affordable and reliable way to enjoy my favorite music in a nostalgic yet modern manner.

🔗Crosley Cruiser Plus Bluetooth Suitcase Turntable in Tourmaline

https://preview.redd.it/qr9j36luib1d1.jpg?width=720&format=pjpg&auto=webp&s=ef9cd5306e83ab3bf3f611edecdf742d653daa3a
Once a vinyl enthusiast, always a vinyl enthusiast. That's my motto ever since I got my hands on the Crosley Cruiser Plus Turntable - Tourmaline. It just blends old school music with modern technology seamlessly. When I first unboxed it, I was instantly charmed by its charming suitcase-style shell. It gave off a vintage vibe that I absolutely loved. Plus, the built-in Bluetooth receiver and stereo speakers took the convenience factor up a notch.
Navigating through the Turntable is a breeze. The adjustable pitch control and 3-speed feature (33 1/3, 45 & 78 RPM) gave me the flexibility to play any vinyl record I wanted. And don't even get me started on the Bluetooth in/out capability. It was like having a digital music player and a vinyl record player all wrapped into one device.
One day, I had the brilliant idea of connecting my phone to the turntable and playing some of my favorite vinyl-to-digital remastered tracks. The sound quality was phenomenal, a perfect blend of digital clarity and analog warmth. Now, if only it didn't skip randomly sometimes. . .
Despite the occasional skip, the Crosley Cruiser Plus Turntable has been a reliable and enjoyable companion on my vinyl adventure. It's portable, easy to use, and best of all, it beautifully blends the charm of old school vinyl with the convenience of modern technology.

🔗Bluetooth Vinyl Record Player with Built-In Stereo Speakers, 3-Speed Belt-Driven Turntable, AUX, RCA & Headphone Sockets

https://preview.redd.it/4r6hc26vib1d1.jpg?width=720&format=pjpg&auto=webp&s=24689ae9c70aa600cb5a97f615dad61b9d8b6ae4
I recently got my hands on this Bluetooth-enabled vintage vinyl record player and it's been a fantastic addition to my music collection. The first thing that caught my eye was the sleek, retro design that adds a touch of class to any room. But, it's not all about looks. The built-in Bluetooth function makes it incredibly easy to connect and play my favorite digital music from my phone or tablet, while the 3-speed belt-driven turntable lets me enjoy all of my vinyl records at various speeds.
One of the standout features for me is the high-sensitivity stylus, which does an excellent job of accurately reading record information. The audio output is decent for its size, and I appreciate the added flexibility of the 3.5mm Aux-in and RCA output options. However, the built-in speakers could be better, so I sometimes connect it to my external speaker system for a more immersive listening experience.
Some drawbacks I noticed are the relatively low power output, which might not be able to fill a big room with sound, as well as the lack of an adaptive speed feature. Additionally, the build quality feels a bit flimsy and the accompanying instructions could be clearer.
Overall, this Bluetooth record player is a stylish and functional addition to any music lover's collection, offering a nostalgic vinyl listening experience with modern connectivity. It's not perfect, but for its price point, it's definitely worth considering.

🔗Bluetooth Vinyl Turntable with 40W Stereo Speakers

https://preview.redd.it/phrbaubvib1d1.jpg?width=720&format=pjpg&auto=webp&s=e6c440c810a089975924b5fed55e740647ab3870
As a music enthusiast, I've had my fair share of turntables, but the Arkrocket Cassini has truly stood out. Upon receiving it, I was blown away by its stunning walnut finish and sleek design. The ease of setup was impressive, making it truly user-friendly. However, what truly captured my attention was the sound quality this turntable delivers.
It uses a moving magnet cartridge system, which offers a stable playback, allowing my vinyls to be enjoyed in all their glory. This turntable also supports Bluetooth, giving me the flexibility to connect with wireless speakers or headphones when I want. The included 40Watt bookshelf speakers are a cherry on top, providing clear and powerful sound.
The only con I noticed was that the turntable is a bit on the heavier side, making it a little less portable than some other options. However, this is a minor inconvenience for the incredible listening experience it provides. Overall, I highly recommend the Arkrocket Cassini for anyone looking to enhance their vinyl listening experience.

🔗Bluetooth Record Player with Stereo Speakers and Cassette Player

https://preview.redd.it/ep176snvib1d1.jpg?width=720&format=pjpg&auto=webp&s=851778d4650a0515ba32cd0c7c7fbc6ff54ae82a
I've been using the Digitnow Bluetooth Record Player with Stereo Speakers, and it's been such a nostalgic blast. Not only does it let me play my old vinyls, but it also has cassette functionality, making it a compact all-in-one media player.
One of the standout features for me is the MP3 conversion capability. As someone who's been slowly digitizing my old music collection, this has been a game-changer. No need for a computer, just connect your USB or SD card and convert your vinyls directly into a MP3 format. The built-in speakers are decent, but they really shine when connected to an external sound system.
The design is quite user-friendly too. The buttons are clearly labeled, and there's even a remote control for added convenience. Plus, the retro look with wooden sides adds a touch of classic charm to my home decor.
However, there are a few downsides. The build quality could be better, as it feels a bit flimsy in places. Additionally, while the sound quality is passable, it's not quite on par with dedicated audio equipment.
Despite these minor drawbacks, I've absolutely loved using the Digitnow Bluetooth Record Player. It's perfect for anyone who wants to relive their old vinyl and tape days, or for those looking to preserve and share their music collection.

🔗Retro Full-Size Jukebox Vinyl Record Player with Bluetooth and USB

https://preview.redd.it/n0uv795wib1d1.jpg?width=720&format=pjpg&auto=webp&s=eb10d9f6e2c425199b84b46cfcb59d94183c7ff4
I recently got my hands on the Arkrocket Full-Size Jukebox Vinyl Record Player and I must say, it brought back a lot of nostalgic memories of my childhood trips to the soda shop. This retro-inspired marvel not only looks stunningly classic but also provides a delightful listening experience with various playback options.
One of the features that truly stood out for me was its bluelight compatibility. It allowed me to effortlessly stream music from my smartphone right into the jukebox, blending old-school charm with modern convenience. Additionally, it comes equipped with a USB port, an SD card slot, and of course, a CD player - talk about versatility!
However, there were a couple of minor drawbacks. The jukebox is quite heavy at nearly 47 pounds, making it a little challenging to move around. Furthermore, I noticed that some parts seemed slightly fragile and needed careful handling.
In conclusion, if you're looking to add a touch of retro style to your home while enjoying your vinyl collection or streaming tunes from your phone, the Arkrocket Full-Size Jukebox Vinyl Record Player could be just what you need. Just remember to handle it with care and maybe keep it in one spot due to its weight.

🔗Vinyl Record Player with MP3 Converter, Bluetooth, CD, and Cassette

https://preview.redd.it/u9qwwsdwib1d1.jpg?width=720&format=pjpg&auto=webp&s=c3f8bdce3bc9650022b10aac1474d0bc4eef0ea3
I recently got my hands on the Digitnow Bluetooth Record Player Turntable, and I can tell you firsthand that it's a versatile and retro-chic addition to your music setup. The briefcase-style design is both trendy and timeless, featuring classic color schemes that blend seamlessly with any decor.
One of the standout features of this turntable is its ability to play multiple formats, including vinyl, CDs, cassettes, and even MP3s. The twin detachable speakers offer clear and loud sound, ensuring that you can jam out to your tunes without any pesky noise interference. Plus, the built-in Bluetooth connection lets you stream music wirelessly from your phone or laptop, giving you even more options for your listening pleasure.
Another awesome feature is the vinyl-to-MP3 recording function. This allows you to digitize your vinyl records and save them on a USB or SD card, making it easier than ever to backup and share your old vinyl collection with friends and family.
Now, let's talk about the downsides, shall we? While the design is undoubtedly eye-catching, the build quality leaves something to be desired. Some users have reported issues with the CD door and overall durability of the unit. Additionally, the remote control is quite small and difficult to use, which can be frustrating if you're not a fan of getting up to change the volume or switch tracks.
In conclusion, the Digitnow Bluetooth Record Player Turntable is a unique and compact device that offers a wide range of listening options for music enthusiasts. While there are some minor drawbacks in terms of build quality and usability, the overall experience is enjoyable, especially for those who appreciate the nostalgic appeal of vinyl records.

🔗Vintage Record Player with Built-in Stereo Speakers

https://preview.redd.it/1awsgttwib1d1.jpg?width=720&format=pjpg&auto=webp&s=8515fb52de796d64d34ea819b673bd961de9e378
As an avid vinyl lover, I recently had the chance to try out the Digitnow! Turntable Record Player. This sleek, vintage-styled device has three speeds and built-in speakers for easy listening. I was pleasantly surprised by its portability, as it's compact enough to take with me on trips or parties without compromising on sound quality. The adjustable 33 1/3, 45, or 78 RPM speeds let me enjoy all my vinyl records without any issues.
One thing that stood out to me was how easy it was to use. The minimalistic design made it straightforward to set up and operate, even for someone like me who's not very tech-savvy. Another highlight was the sound quality - the dynamic full-range stereo speakers delivered crisp, clear audio that brought my old vinyl records back to life.
However, there were also some drawbacks. While the built-in speakers are decent, they might not be powerful enough for larger gatherings or more demanding music enthusiasts. Additionally, I noticed that the turntable can be a bit sensitive, so you'll need to handle it gently to avoid damaging your vinyl records.
Overall, I've had a mostly positive experience with the Digitnow! Turntable Record Player. Its stylish design, ease of use, and good sound quality make it a great choice for anyone looking to enjoy their vinyl collection in a modern way.

🔗Bluetooth-Enabled Stereo Turntable

https://preview.redd.it/bv0dp49xib1d1.jpg?width=720&format=pjpg&auto=webp&s=51a046a4a02cdf30069381c2a0a6a67317219ba4
When I first got my hands on the Audio-Technica AT-LP60XBT-SV Bluetooth Stereo Turntable, I was excited to bring back the vinyl vibes of old. As someone who enjoys collecting and listening to records, this little device quickly became my go-to for its easy setup and great sound quality.
One of the main features that stood out for me is its automatic play feature. With just a touch of a button, the turntable starts playing your favorite vinyls without needing any manual adjustments or advanced setup. It's perfect for those who want the convenience of modern technology while still enjoying the nostalgic sound of analog music.
The Bluetooth connectivity also added a lot of functionality to my listening experience. I could easily pair the turntable with my wireless speakers or headphones, allowing me to enjoy my vinyl collection from anywhere in the room. Plus, the included CSR BT chipset ensured that the connection was stable and didn't drop out unexpectedly.
However, there were a few drawbacks that I encountered with this turntable. Firstly, the build quality felt a tad flimsy, especially when compared to other models in the same price range. Additionally, although the sound quality was decent overall, it wasn't quite up to par with some of the more premium options on the market.
In summary, if you're looking for a beginner-friendly turntable that offers great convenience and easy setup, the Audio-Technica AT-LP60XBT-SV is definitely worth considering. While its build quality and sound performance are not top-notch, it provides excellent value for the price and will surely bring back those retro vinyl vibes you've been craving.

🔗BluetoothturntablePlayerforvinylrecordswithejectandfastforward, REC, DELfunction.

https://preview.redd.it/fnxqjojxib1d1.jpg?width=720&format=pjpg&auto=webp&s=afbdb53ca73729d7f28a1273866a2fb5a303a294
I recently got my hands on the Digitnow Bluetooth Record Player Turntable, a multifunctional device that plays vinyl records, tapes, CDs, and even connects to your smartphone via Bluetooth. I was excited to give it a try, as I've been collecting vinyls for a while now and wanted a convenient way to listen to them.
Right out of the box, the turntable was easy to set up. Its compact size makes it perfect for any living space, and it comes with a built-in speaker that provides decent sound quality. The ability to convert vinyl records into MP3 files directly is a lifesaver for music enthusiasts like me who want to share their favorite tunes without fumbling with extra devices.
However, not everything was perfect. The build quality of the turntable wasn't as high as I'd hoped, which led to some durability issues. Additionally, the sound level could be louder for a more immersive listening experience, especially when using the Bluetooth feature.
All in all, the Digitnow Bluetooth Record Player Turntable is a solid choice for those looking to play and share their vinyl records and other media formats. While it has some room for improvement in the build and sound department, its convenient features make it worth considering for any music lover's collection.

🔗Fully automatic vinyl turntable setup

https://preview.redd.it/qu00r1wxib1d1.jpg?width=720&format=pjpg&auto=webp&s=63d678a51a8e02e82a80361ae1b5d4eec2664c6a
In the realm of vinyl enthusiasts, the Dual CS 329 Fully Automatic Turntable reigns supreme as a beginner-friendly choice offering high-quality audio playback. This sophisticated but user-friendly device is a plug-and-play marvel that comes pre-assembled and fully ready to use. Its unique automated functions, such as the versatile tonearm that lowers, swivels, and raises at the press of a button, make it a breeze to operate. Moreover, its factory-fixed settings ensure optimal performance right out of the box.
The plinth boasts an integrated elastomer vibration absorber, providing enhanced stability, accompanied by a removable dust cover that protects the device. The meticulously crafted aluminium die-cast platter and heavy rubber mat effectively dampen unwanted resonance, resulting in exceptional sound clarity. In addition, the drive's rubber mountings eliminate vibrations, while the precision-cut belt aids in minimising wow and flutter.
My personal experience using the Dual CS 329 has been nothing short of awe-inspiring. Each vinyl listening session is now elevated due to its superior sound quality, making this turntable a worthwhile investment. While it may lack some of the advanced features of higher-end models, its ease of use and setup more than make up for it.
However, one minor drawback lies in its lack of customisability. For those seeking to fine-tune their listening experience, the fixed settings might be somewhat limiting. Nevertheless, for the casual vinyl collector or someone new to analogue playback, the Dual CS 329 is an absolute gem.
In conclusion, the Dual CS 329 Fully Automatic Turntable strikes a perfect balance between user-friendliness and superb sound quality. It's my go-to recommendation for those looking to explore the world of vinyl or simply enjoy a hassle-free and enriching listening experience.

Buyer's Guide

Introduction to Capehart Record Players

https://preview.redd.it/zbvdufjyib1d1.jpg?width=720&format=pjpg&auto=webp&s=3b378c2c35c5e3520f225116dad3bee1c192827d
Capehart record players have been a staple in the audio industry for decades. These players offer high-quality sound and durability, making them a popular choice among music enthusiasts. In this buyer's guide, we will explore important features, considerations, and advice when purchasing a Capehart record player.

Features to Look for in a Capehart Record Player

High-quality turntable: Ensure that the record player has a reliable and precise turntable to maintain consistent speed and reduce skipping.
Anti-skate control: This feature helps prevent the stylus from skating across the grooves, resulting in better sound quality.
Adjustable counterweight: Allows for fine tuning of the stylus weight, ensuring minimal damage to your vinyl records.
Dust cover: A clear, hinged cover to protect the turntable and maintain cleanliness when not in use.
Compatibility with various vinyl sizes: Make sure the record player can support different vinyl sizes such as 7", 10", and 12" records.

Important Considerations Before Purchasing a Capehart Record Player

Budget: Determine how much you are willing to spend on a record player, as prices can vary widely based on features and quality.
Usage: Consider how often you plan to use the record player and what types of vinyl records you have or plan to collect.
Space: Ensure you have enough room for the record player and its components, especially if you're purchasing a more advanced or vintage model.
Brand reputation: Research the manufacturer and customer reviews to ensure their record players maintain a reputation for quality and durability.

https://preview.redd.it/4rz73kxyib1d1.jpg?width=720&format=pjpg&auto=webp&s=95b8ca5aebbefdeb52cd0e56a287837be3127f79

General Advice for Purchasing and Using a Capehart Record Player

Proper storage: Keep your vinyl records in a cool, dry place away from direct sunlight, as excessive heat or humidity can damage them.
Clean your records and stylus: Regularly clean both your vinyl records and the stylus to maintain optimal sound quality and prevent long-term damage to your collection.
Become familiar with your record player's features: Learn how to adjust the speed, counterweight, and anti-skate control, as well as how to properly care for the stylus, turntable, and overall unit.

Conclusion

Capehart record players offer a nostalgic, high-quality audio experience for vinyl enthusiasts. By considering the important features, factors, and advice outlined in this buyer's guide, you can confidently select a record player that suits your needs and preferences. Enjoy your collection and the timeless sound of vinyl records.

FAQ

https://preview.redd.it/y29sd1mzib1d1.jpg?width=720&format=pjpg&auto=webp&s=f9d8b7a94dd5c6057b5606e1128fdddeb7df9538

Q1. What is a Capehart record player?

A Capehart record player is a vintage turntable that was popular in the 1950s and 1960s. It was known for its high-quality build and performance, which helped it stand out among other record players of that time.

Q2. Are Capehart record players collectible items?

Yes, Capehart record players are considered collectible items due to their historical significance and premium construction. Many audiophiles and vintage collectors are interested in acquiring these machines.

https://preview.redd.it/4ztji3pzib1d1.jpg?width=720&format=pjpg&auto=webp&s=e3262425a22a7c54bfa8c6207a41ae8422974c83

Q3. What features should I look for when buying a Capehart record player?

When purchasing a Capehart record player, consider the following features: auto-return, automatic changer, reliable motor, and overall condition of the unit. These features indicate a record player's performance and ability to handle your vinyl collection.

Q4. How do I maintain my Capehart record player?

To maintain your Capehart record player, follow these steps: clean the stylus and record regularly, keep the unit away from direct sunlight and extreme temperatures, and ensure that it's properly calibrated. Regular maintenance will help prolong the life of your Capehart record player. ### Q5. How much does a Capehart record player typically cost?
The cost of a Capehart record player can vary depending on its condition, features, and rarity. Generally, prices range from several hundred dollars to thousands of dollars for more collectible or rare models.

Q6. Can I replace parts on a Capehart record player?

Yes, some parts of a Capehart record player can be replaced, such as stylus cartridges, belts, and other wear-and-tear items. However, it's essential to ensure that the replacement parts are compatible with your specific model to maintain optimal performance.

Q7. Where can I find replacement parts for my Capehart record player?

Replacement parts for Capehart record players can be found through specialized vintage audio retailers, online marketplaces, and auction sites. Be sure to verify compatibility with your particular model before purchasing any parts.

Q8. How do I set up my Capehart record player?

To set up your Capehart record player, follow these steps: connect the power cord, install the stylus, connect the speaker system, and calibrate the unit. Ensure to refer to the user manual for detailed instructions on setting up your specific model.

Q9. How do I troubleshoot common issues with my Capehart record player?

Should the record skip or not play properly, first check if the stylus is clean and properly aligned.
Ensure that the record player is connected to a power source and the power cord is working correctly.
If the motor is not performing optimally, consider checking for possible obstructions or debris and ensure the unit is properly calibrated.

Q10. How can I ensure that my Capehart record player sounds its best?

To ensure optimal performance, follow these steps: use high-quality vinyl records, maintain a clean stylus, keep the unit away from excessive dust and debris, and ensure that it's properly calibrated. Additionally, investing in a premium preamplifier can significantly enhance the overall sound quality of your Capehart record player.
As an Amazon™ Associate, we earn from qualifying purchases.

submitted by ConsequenceSure3063 to u/ConsequenceSure3063 [link] [comments]

http://swiebodzin.info