I have a hp prodesk 600 g1, cpu i5 4690, and 240w power supply. I had a GTX 750 ti 4gb consuming 60w but it stopped working.
My question is which card will work better in this pc: the rx6400 low profile or a 3050 ti 6 GB low profile.
I read that because the 6400 uses pci4.0 x4 was not recommended to use it in a pci 3.0. but I'm afraid that the 3050 is too much for this little guy.
What do you recommend, I do not need much, I just need to be able to play on low. with the 4gb of the 750 ti was enough for me.
I am not mentioning the 1050 ti or the 1650 because they are not available in my country.

My original build featured an Asus Sabertooth 990FX R2.0 motherboard, an AMD 8350 FX processor, 32GB of RAM at 1666MHz, a 250GB SSD, a 1TB hard drive, an AMD 6870 GPU, a corsair 850W TX power supply, and a NZXT Phantom case, along with a Corsair H80 cooler. I upgraded the GPU to an R9 290 around 2016-2017. In 2021, I switched to an AMD 5700XT and eventually upgraded my SSD to an NVMe using an expansion card slot. OG build was around 2012-2013
Currently, I’m using a PCI-E 2.0 NVMe card running at 4x. Due to the older PCI-E 2.0 interface, my system’s speed is around 1600-2200 MB/s according to Crystal Disk Mark. The fastest file transfer speed I’ve observed is about 1.19GB/s, while using a newer Samsung 980 Pro NVMe SSD with a PCI-E 4.0 interface and a rated read speed of 3500MB/s.
Despite these constraints, I’ve enjoyed pushing my PC to its limits. I can even stream VR at 720p with minimal lag. The main bottlenecks now are my CPU and RAM, but unfortunately, upgrading those would require replacing the motherboard, CPU, and RAM, which is annoying but understandable. Minecraft, in particular, is straining my CPU when maxed out, prompting me to consider an upgrade. It’s frustrating because, aside from this, the system runs very well. My PSU has been incredibly reliable, so I plan to keep using it.
I played starfield on max graphics at 1080p even, with minor lag, only right at the beginning of an onslaught of npcs spawning/rendering. Call me crazy but I am fine at a stable 28fps lol
When considering an upgrade, I plan to stick with Asus for the motherboard. I'm still undecided on the CPU, as I’ve noticed Intel has been edging out AMD in terms of price-to-performance ratio. For RAM, I'll likely continue with G.Skill, as I’ve been using their products without any issues. Corsair for a cooler, or I'll do a diy one.
Those alone should cause a massive performance increase considering my GPU and nvme have never been able to operate at full speed anyway so I'll be keeping those.
All together I have spent less than $3000 for a pc for 11-12 years or about $250 a year or $20.83 a month

Hello, I'm working on a new build and have a problem where multiple devices poof disappear from Device Manager after 3-5 minutes. Here's a picture of Device Manager right after bootup and here's a picture after whatever happens...happens.. The full list of devices that go away is below.
Has anyone encountered something like this before? I'm on the latest BIOS and I've tried the following:

• Setting Windows power settings to maximum performance
• Installing Armoury Crate and using all of the drivers that it suggest
• Uninstalling Armour Crate and associated drivers
• Disabling Thunderbolt 4 in BIOS settings
• Installing drivers directly from Asus
• Installing drivers directly from Intel

I'm tearing my hear out over this, would love it if anyone has any ideas...
The full list of devices that disappear:
Audio inputs and outputs

• SPDIF Interface (Realtek USB Audio)

Bluetooth

• Bluetooth Device (RFCOMM Protocol TDI)
• MediaTek Bluetooth Adapter
• Microsoft Bluetooth Enumerator
• Microsoft Bluetooth LE Enumerator

Human Interface Devices

• 1x HID-complaint consumer control device
• 1x HID-compliant vendor-defined device
• 2x USB Input Device

IDE ATA/ATAPI controllers

• Standard SATA AHCI Controller
• Standard SATA AHCI Controller

Network adapters

• Bluetooth Device (Personal Area Network)
• Intel(R) Ethernet Controller (3) I225-V
• MediaTek Wi-Fi 6E MT7922 (RZ616) 160MHz Wireless LAN Card

Software components

• A-Volute Nh3 Audio Effects Component
• Realtek Audio Effects Component (USB)
• Realtek Audio Universal Service
• Realtek Hardware Support Application
• Thunderbolt(TM) HSA Component
• Thunderbolt(TM) Toast Component

Sound, video and game controllers

• Realtek USB Audio
• Sonic Studio Virtual Mixer

System devices

• 15x PCI Express Downstream Switch Port
• 3x PCI Express Upstream Switch Port
• Thunderbolt(TM) Controller - 1137

Universal Serial Bus controllers

• 2x AMD USB 3.10 eXtensible Host Controller - 1.10 (Microsoft)
• 1x Generic USB Hub
• Intel(R) USB 3.10 eXtensible Host Controller - 1.10 (Microsoft)
• 3x USB Composite Device
• 3x USB Root Hub (USB 3.0)

Universal Serial Bus devices

• AURA LED Controller

I use a small 2U server for unraid but I need more drives, I have spare pci slots and came across these Fujitsu DAS system that are cheap, they hold 24x2.5" drives.
I can only find the lsi megaraid cards which won't work with unraid as far as I know as they're a true raid card and not a hba.
Anyway to get one of these DAS systems to work?

I am so. Close. To finishing it. If managed everything up until now BUT I can't seem to get the end of the cable from my graphics card (RTX 4070 Ti Super) to plug into my PSU (Thermaltake toughpower gf3 750W Gold) They are supposed to go in the PCI-E slots, correct? I have tried putting the pins 6+2 in together, 'I've tried both seperately, I've even unscrewed the PSU from the Case just to get a better grip... What am I missing? I've already used as much force as I thought would be necessary, I'm afraid of breaking it. Please advise, thank you!
Pic of the connectors and PSU
Better look at PSU
Better look at the connectors

I'm currently running a GPU passthrough setup on my machine, which is where the dedicated GPU is passed through entirely to a Windows VM and the integrated graphics are running the host system. I'm looking at getting a thunderbolt PCI expansion card that my motherboard supports (like this one), but I'm not sure where the display port connectors on it would connect to. To the dedicated GPU? To the onboard graphics? To the motherboard's primary graphics device (iGPU)?

Hello friends.i will setup soon my Truenas scale homeserver which lives in an HP elitedesk g4 800 sff. 2 nvmes mirrored and 2 x 12 TB HDDs mirrored.
I have brought to add a 2.5g NIC but later i wi need to add two more hdds. But there is no space and sata ports available so i would like to know in respect to Truenas and Zfs filesystem which is still unknown to me, what would be the best approach to do this? Certainly not with usb.
Is there a budget sata/sas pci card which could work to connect with sata/sas cable EXTERNALLY a 2 drives bay?
Thank you

Hello everyone!
Over a year ago I started with my own homelab.
The idea was to have an all-in-one solution, where I would have virtualised firewall + nas + ubuntu server (for docker). All running on Proxmox.
The NAS and docker is working fine but I had some issues with the virtualised firewall, it had huge lag spikes and the speed was also dropping off randomly so I had to remove it from Proxmox and put the provider router back to router mode (had it in bridge) and use that as a 'firewall'.
The specs of the server:

• be quiet! Pure Power 11 500W
• Intel Core i5-10400
• Kingston FuryDDR4 16GB 3200MHz (2x8GB)
• ASRock H510M-HVS R2.0
• Samsung SSDs
• 2xWD REDs (4TB)
• and I have this NIC there: 1G 1000Mbps Gigabit Ethernet Converged Network Adapter (NIC) mit Intel I350AM2

Then I have it all connected via Netgear Gigabit Plus Switch Series (GS108E) Switch

• I decided to get a separate device ( Fujitsu Futro S920 ThinClient AMD GX-415GA SOC 1.50GHz 2GB RAM 8GB SSD to serve as a router and put opnsense on it (not purchased it yet but its the best one I found)

My questions:

• if I use an AP like Ubiquiti UniFi -> should the AP should be connected from the switch or directly from the router (if from the router I guess I will have to purchase a 4nic network card instead of a 2nic right?)
  
• I was thinking of taking the NIC I have in my server, the Intel I350AM2 and using it in the router, and then putting a 10Gb NIC card into my home server to get better speeds for file transfers in my home network. I Came across Broadcom cards but I am unsure if this will work as expected - does anyone has any experience in it? For example this 10Gb Dual SFP+ Port NIC PCI-E BCM57810 one.
  
• My biggest 'concern' are the wireless speeds, because in my current situation I am unable to connect my main PC with ethernet cable directly, so I need to rely on wifi (want to use the AP and then plug the cable from the AP to the PC). Do you maybe have any recommendations here in terms of the hardware (the router and AP's) to get the best performance?
  

Thank you!

about me :- i am in 11th grade from india and i want to build a pc with a budget of 70k RS ....i will not be goin out of state for studies for 6-7 years from tod
[pc]
[PROCESSOR]

Intel Core I5 12400F 12 Gen Generation Desktop Pc Processor 6, CPU with 18Mb Cache and Up to 4.40 Ghz Clock Speed Ddr5 and Ddr4 Ram Support Lga 1700 Socket, Micro ATX

[ GRAPHICS CARD]

ZOTAC Gaming Geforce RTX 4060 8Gb Twin Edge Oc Gddr6, 128Bit, Pci Express 4.0 X8 & 5 Years Warranty (3 Years Warranty + 2 Years Extended Warranty) - Pci_E_X8

[ MOTHER-BOARD]

MSI B550M Pro-Vdh WiFi Ddr4, M.2, USB 3.2 Gen 1, Front Type-C, Wi-Fi, Hdmi, Micro ATX Gaming Motherboard AMD Ryzen 5000 Series Desktop Processors

[RAM]
16gb + 16gb
[ 60,000rs + 10,000rs moniter ]
LAPTOP ;-

ASUS TUF Gaming F15, Intel Core i5-11400H 11th Gen, 15.6" (39.62 cm) FHD 144Hz, 4GB RTX 3050 Graphics, Gaming Laptop (16GB/512GB SSD/Windows 11/Office 2021/90WHr Battery/Black/2.3 kg), FX506HC-HN362WS

which should i go for as in the near future laptop will become slower and slower and i dont have to go to study for atleast 6-7 years
YOUR OPINION MATTERS :)

NVIDIA system information report created on: 05/31/2024 23:43:18
NVIDIA app version: 10.0.0.535/p
Operating system: Microsoft Windows 11 Pro, Version 10.0.22631
DirectX runtime version: DirectX 12
Graphics Card
GPU processor: NVIDIA GeForce RTX 3060
Direct3D feature level: 12_1
CUDA cores: 3584
Graphics clock: 1882 MHz
Resizable bar: No
Memory data rate: 15.00 Gbps
Memory interface: 192-bit
Memory bandwidth: 360.048 GB/s
Total available graphics memory: 20438 MB
Dedicated video memory: 12288 MB GDDR6
System video memory: 0 MB
Shared system memory: 8150 MB
Video BIOS version: 94.06.14.40.45
IRQ: Not used
Bus: PCI Express x16 Gen4
Device ID: 10DE 2503 36573842
Part number: G190 0060
Driver: Game Ready Driver - 555.85 - May 20, 2024
Display: 2560x1440,59Hz
CPU: AMD Ryzen 5 5600X 6-Core Processor
RAM: 16.0 GB
Storage (2): SSD - 465.8 GB,SSD - 1.8 TB

Hi all,
I'm planning to add a bit more storage (SSD) and memory to my current PC (~ 4 years old). I was wondering:

• If I can just buy and plug in extra SSD and memory to my current settings (i.e. are there enough slots on my motherboard)?
  
• Any recommendations for SSD and memory (e.g. brand, model, etc.)?
  
• Are there any other parts you would recommend me to upgrade? I will be using this PC for the next few more years. I mainly use it for gaming, but the types of game I usually play doesn't usually require high end graphics card (FO4, R6S, cp2077, BG3). I might upgrade graphics card later on in the future, but not atm, I think.
  

Specs of my current PC:

• AMD Ryzen 5 3600 (Base: 3.60GHz, Boost: 4.20GHz / 35MB Cache / AM4 / 6 Core / 65 Watt / Wraith Stealth Cooler / Matisse, RZ3KCPU)
  
• MSI B450M MORTAR MAX MB, B450, 4x DDR4, 2x PCIE3.0 x16, 4x SATA3, 2x Turbo M.2, 8x USB3.1, DisplayPort, HDMI, Micro ATX, Mystic Light
  
• Samsung 500GB SSD, 860 EVO, SATA III, 7mm, Read up to 550MB/s, Write up to 520MB/s, 98K/90K IOPS
  
• Seagate 2TB BarraCuda 2.5" Hard Drive, SATA III, 5400RPM, 128MB Cache, 7mm, SMR
  
• Corsair Vengeance LPX 16GB (2x8GB), PC4-25600 (3200MHz) DDR4, 16 18-18-36, 1.35v, Dual Channel Kit, Black
  
• EVGA GeForce RTX 2060 SUPER SC Ultra Gaming (Boost:1680MHz), 8GB GDDR6 (14000MHz), PCI-E 3.0, 2x DisplayPort 1.4, DVI-D, HDMI 2.0b
  
• SilverStone 650W Essential Power Supply, 80 PLUS Bronze, 120mm Silent Fan, 1x EPS, 2x PCI-E (8/6P), 6x SATA, 3x Molex, 1x Floppy, Flat Cables
  
• Cooler Master MasterBox NR600 Black Mid Tower ATX Case, Tempered Glass Window, No PSU, 2x USB 3.0, Headset Jack, support up to 360 mm radiator, Mesh Front Panel, No ODD slot
  

Thanks a lot in advance. Let me know if you need any additional info. :)

I have a Dell Dimension 4600 running Windows XP. Currently it has an Intel Pentium 4 2.4Ghz CPU. 512MB or RAM, and a pretty low performance Nvidia FX 5200 AGP graphics card. What would be a better replacement for the Nvidia FX 5200 that could be used in an AGP or PCI slot (no PCIE slot on the motherboard)?

Looking to play 1440p - many different kinds of games but mainly AAA. Looking to buy the PC in 2.5 weeks at microcenter (can utilize a bundle). Looking to stay under $2,000 all in including monitor. It's dumb, but I want it to look aesthetically nice this time (2nd time building). Case, fans are non-negotiable, would like a cool AIO but the NZXT has risen in price, so open to other options for that as well that are AIO. Looking for any suggestions on anything besides case and fans (so even the keyboard, monitor, stand, etc) , and also about using reverse fans (I have one in there but don't know how many I need and the best orientation for them). I am keeping my 1TB storage SSD and mouse from old pc FYI. Thanks in advance!
PCPartPicker Part List

Type	Item	Price
CPU Cooler	NZXT Kraken 240 78.02 CFM Liquid CPU Cooler	$139.99 @ Amazon
Video Card	Gigabyte WINDFORCE OC GeForce RTX 4070 SUPER 12 GB Video Card	$599.99 @ B&H
Power Supply	SeaSonic FOCUS SPX (2021) 750 W 80+ Platinum Certified Fully Modular SFX Power Supply	$104.99 @ Newegg
Case Fan	Lian Li UNI FAN SL V2 64.5 CFM 120 mm Fan	$26.99 @ Amazon
Case Fan	Lian Li UNI FAN SL V2 64.5 CFM 120 mm Fan	$26.99 @ Amazon
Case Fan	Lian Li UNI FAN SL V2 64.5 CFM 120 mm Fans 3-Pack	$76.98 @ Amazon
Case Fan	Lian Li UNI FAN SL V2 64.5 CFM 120 mm Fans 3-Pack	$76.98 @ Amazon
Case Fan	Lian Li UNI FAN SL V2 120 Reverse 65.4 CFM 120 mm Fan	$25.99 @ Newegg
Monitor	LG 27GP850-B 27.0" 2560 x 1440 165 Hz Monitor	$296.99 @ Amazon
Keyboard	Redragon K552 Wired Gaming Keyboard	$39.99 @ Amazon
Custom	Asiahorse Customization Mod Sleeve Extension Power Supply Cable Kit 18AWG ATX/EPS/8-pin PCI-E/6-pin PCI-E (black)	$26.99 @ Amazon
Custom	Single Monitor Mount - Articulating Gas Spring Monitor Arm, Adjustable VESA Mount Desk Stand with Clamp and Grommet Base - Fits 17 to 27 Inch LCD Computer Monitors 4.4 to 14.3lbs	$39.99 @ Amazon
Custom	Lian Li O11D Mini Tempered Glass ATX Mini Tower Computer Case - Black	$100.00
Custom	AMD Ryzen 7 7800X3D, Gigabyte B650 Gaming X AX v2, G.Skill Flare X5 Series 32GB DDR5-6000 Kit	$480.00
	Prices include shipping, taxes, rebates, and discounts
	Total	$2062.86
	Generated by PCPartPicker 2024-05-31 17:56 EDT-0400

What if 2-3 slot wide video cards could latch into the 2nd/3rd pci slot? No connectivity, like sli, just use it to support the weight of the card better.

My current PC graphics card has 2 Dual-Link DVI ports and a mini HDMI port. Computer runs great so not looking for a new PC.
I'd like to add 2 4k monitors at 60Hz each, using a USB3.0/USB-C dongle that provides 2 HDMI ports. The options are to either utilize an available USB 3.0 port (blue), or add a USB-C PCI card into an available slot.
Would one way work better or dependable than the other? Just looking for higher resolution, movies, general use vs. any gaming on this particular PC.

I am relatively new to linux and have only been using fedora 40 for a few months. As part of a school project I am using PyTorch to train a semantic segmentation model. I have installed the ROCm version of PyTorch, but whenever I try to run my training program, it always returns an out of memory error.
The laptop I'm using is a ROG Zephyrus G14 GA402RK, which comes with both a Radeon 680M and an AMD Radeon RX 6800S 8 GB. PyTorch is "running out of memory" when it tries to allocate 20 MiB, so it is clearly not using the 8GB GPU. Running lspci grep -i radeon I get this output:
❯ lspci grep -i radeon 07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rembrandt [Radeon 680M] (rev c7) 07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Rembrandt Radeon High Definition Audio Controller
Which does not contain the Radeon RX 6800S. Running inxi -Fzxx I get this output:
System: Kernel: 6.8.10-300.fc40.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 2.41-37.fc40 Desktop: KDE Plasma v: 6.0.5 tk: Qt v: N/A wm: kwin_wayland dm: SDDM Distro: Fedora Linux 40 (KDE Plasma) Machine: Type: Laptop System: ASUSTeK product: ROG Zephyrus G14 GA402RK_GA402RK v: 1.0 serial: Mobo: ASUSTeK model: GA402RK v: 1.0 serial: UEFI: American Megatrends LLC. v: GA402RK.318 date: 03/09/2023 Battery: ID-1: BAT0 charge: 36.6 Wh (65.6%) condition: 55.8/76.0 Wh (73.5%) volts: 15.9 min: 15.9 model: ASUSTeK ASUS Battery serial: N/A status: discharging Device-1: hidpp_battery_0 model: Logitech M720 Triathlon Multi-Device Mouse serial: charge: 100% (should be ignored) status: discharging CPU: Info: 8-core model: AMD Ryzen 9 6900HS with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3+ rev: 1 cache: L1: 512 KiB L2: 4 MiB L3: 16 MiB Speed (MHz): avg: 832 high: 1397 min/max: 400/4935 cores: 1: 1372 2: 400 3: 1397 4: 400 5: 1386 6: 400 7: 400 8: 400 9: 1389 10: 1397 11: 400 12: 400 13: 1384 14: 400 15: 400 16: 1395 bogomips: 105398 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm Graphics: Device-1: AMD Rembrandt [Radeon 680M] vendor: ASUSTeK driver: amdgpu v: kernel arch: RDNA-2 pcie: speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, DP-7, DP-8, Writeback-1 bus-ID: 07:00.0 chip-ID: 1002:1681 temp: 45.0 C Device-2: Quanta USB2.0 HD UVC WebCam driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-3:3 chip-ID: 0408:30c3 Display: wayland server: X.org v: 1.20.14 with: Xwayland v: 24.1.0 compositor: kwin_wayland driver: N/A display-ID: 0 Monitor-1: eDP-1 res: 2560x1600 size: N/A API: EGL v: 1.5 platforms: device: 0 drv: radeonsi device: 1 drv: swrast surfaceless: drv: radeonsi wayland: drv: radeonsi x11: drv: radeonsi inactive: gbm API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.8 glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi rembrandt LLVM 18.1.1 DRM 3.57 6.8.10-300.fc40.x86_64) device-ID: 1002:1681 display-ID: :0.0 API: Vulkan v: 1.3.280 surfaces: xcb,xlib,wayland device: 0 type: integrated-gpu driver: N/A device-ID: 1002:1681 device: 1 type: cpu driver: N/A device-ID: 10005:0000 Audio: Device-1: AMD Rembrandt Radeon High Definition Audio driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16 bus-ID: 07:00.1 chip-ID: 1002:1640 Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: ASUSTeK driver: snd_pci_acp6x v: kernel pcie: speed: 16 GT/s lanes: 16 bus-ID: 07:00.5 chip-ID: 1022:15e2 Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16 bus-ID: 07:00.6 chip-ID: 1022:15e3 API: ALSA v: k6.8.10-300.fc40.x86_64 status: kernel-api Server-1: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin Network: Device-1: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter vendor: AzureWave ASUS PCE-AXE59BT driver: mt7921e v: kernel pcie: speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 14c3:7922 IF: wlp5s0 state: up mac: IF-ID-1: docker0 state: down mac: IF-ID-2: nordlynx state: unknown speed: N/A duplex: N/A mac: N/A Bluetooth: Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 bus-ID: 5-1:2 chip-ID: 13d3:3568 Report: btmgmt ID: hci0 rfk-id: 2 state: up address: bt-v: 5.2 lmp-v: 11 Drives: Local Storage: total: 953.87 GiB used: 72.71 GiB (7.6%) ID-1: /dev/nvme0n1 vendor: Micron model: 2450 MTFDKBA1T0TFK size: 953.87 GiB speed: 63.2 Gb/s lanes: 4 serial: temp: 33.9 C Partition: ID-1: / size: 428.69 GiB used: 72.24 GiB (16.9%) fs: btrfs dev: /dev/nvme0n1p5 ID-2: /boot size: 973.4 MiB used: 403.6 MiB (41.5%) fs: ext4 dev: /dev/nvme0n1p4 ID-3: /boot/efi size: 256 MiB used: 78.2 MiB (30.5%) fs: vfat dev: /dev/nvme0n1p1 ID-4: /home size: 428.69 GiB used: 72.24 GiB (16.9%) fs: btrfs dev: /dev/nvme0n1p5 Swap: ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0 Sensors: System Temperatures: cpu: 46.4 C mobo: 40.0 C gpu: amdgpu temp: 45.0 C Fan Speeds (rpm): cpu: 0 Info: Memory: total: 32 GiB note: est. available: 30.57 GiB used: 4.73 GiB (15.5%) Processes: 415 Power: uptime: 30m wakeups: 0 Init: systemd v: 255 target: graphical (5) default: graphical Packages: pm: flatpak pkgs: 7 Compilers: clang: 17 gcc: 14.1.1 Shell: Zsh v: 5.9 running-in: konsole inxi: 3.3.34
Which also does not feature the Radeon RX 6800S anywhere.
Is there some driver I need to install or some command I need to run to fix this? What can I do to get fedora to recognize the other graphics card?

This is a bit long, but I believe that when it comes to IT questions, there is no such thing as too much information!
I'm not running the next-gen update for now. I play the game via MO2 and I have 262 mods. Most are texture replaces and enhancers.
I have turned off all settings in my version of AMD Adrenaline, which is 24.5.1, released on May 8, 2024. My understanding from comments that I've read here is that Adrenaline is not really necessary for me to achieve optimal FPS in this game due to the fairly robust nature of my PC.
To start, here my specs so you'll know my hardware situation:
· Corsair 780T Case
· Windows 10 Pro 64-bit 20H2 OS Build 19044.1766 – Windows Feature Experience Pack 120.2212.4180.0
· Intel Core i7 9th Gen - Core i7-9700K Coffee Lake 8-Core 3.6 GHz (4.9 GHz Turbo) LGA 1151 (300 Series) 95W BX80684I79700K
· ASUS Prime Z390-P LGA 1151 (300 Series) Intel Z390 SATA 6Gb/s ATX Intel Motherboard for Cryptocurrency Mining (BTC) with Above 4G Decoding, 6 x PCIe Slot and USB 3.1 Gen2
· G.SKILL Ripjaws V Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 4266 (PC4 34100) Intel XMP 2.0 Desktop Memory Model F4-4266C19D-32GVK
· Corsair iCUE H150i RGB Pro XT CPU Cooler
· ASUS Dual Radeon RX 6600 XT Mech 2x 8GB GDDR6 PCI Express 4.0 CrossFireX Supprt ATX Video Card DUAL-RX6600XT-O8G
· GIGABYTE G27Q 27" 144Hz 1440P Gaming Monitor, 2560 x 1440 IPS Display, 1ms (MPRT) Response Time, 92% DCI-P3, VESA Display HDR400, FreeSync Premium, 1x Display Prt 1.2, 2x HDMI 2.0, 2x USB 3.0
I don't grok most video card terminology or acronyms, so I think that came into play when I attempted to change settings in Adrenaline and in the High FPS Fix ini file to ensure a good frame rate because my lockpicking was spazzing out, which I think was due to the latest Adrenaline update.
I had changed some settings in the High FPS Fix ini file, but as I said, I wasn't 100% confident in my choices, so I have turned off all settings in Adrenaline and restored the original High FPS Fix ini file from my download of the mod so that I can start fresh.
I have edited the [Display] settings in Fallout4Prefs.ini to 2560x1440, which is the native resolution of my Gigabyte monitor, and the game looks SO much better! I also turned on HDR for the first time and WOW, even moar better!
I adjusted the Pip-Boy resolution down from the recommendation on the Nexusmods page for one of the FallUI mods (can't remember which) to 1250x1024, but now I can't determine which mod it was because nexusmods Download History is currently borked. I doubt that made a difference in performance as I'm still a noob when it comes to video card software technobabble.
ANYWAYS, I have noticed that my frame rate still drops below 60 in some places outside. Earlier this week I was putzing around in the Cambridge Construction site and I noticed my FPS took a nose dive into the teens once I moved inside, so I figured that my uninformed adjustments to Adrenaline and/or the High FPS Physics Fix ini file were to blame.
As I said, I reset both to zero or vanilla values, and I'm hoping that some kind souls can direct me on which settings I should adjust to improve my FPS both inside and out so that I can look forward to starting a new game with graphics that drip like melted buttah!
Thanks very much if you've read this far!