I did the plumbing on my own in my basement and there is a slight smell from the sink and I feel like a have something wrong here and need help please!

Currently repairing the plumbing under our garage (century home that has been updated multiple times over the past 200 years so we have a bit of everything).
Water supply lines are all now fixed but now I see that when I run the water in the laundry sink it just drains straight into the ground below the garage. There are proper drain pipes there that go into the ground so I thought there must be a crack or something but when I got under there I saw that there was just no cap on one end so water just flows straight out. It also doesn't look like there was a cap there that came off, but just that there never was one (or if it came off it was a while ago)
So not sure if I should (or if it's possible) just cap this off or if there is a reason it's open?
Any help would be appreciated. Photos attached.

This isn't glued yet. The sink waste is in the final position. You can't see from the picture but the wall outlet is about 10mm out of line from where the sink waste needs to be. The result is that I can't plumb a P trap directly to the outlet. The sink waste (center) is 125mm off the wall and the pipe work is 40mm.

Finding the ideal bathtub size can be a difficult challenge when there are so many different sizes available. The typical bathroom is already so cramped that trying to comfortably fit everything in might feel like fitting pieces into a jigsaw puzzle. The bathtub has changed from being only a practical object to a focal point of bathroom design as a result of the rise in home decor trends and the focus on luxurious bathing experiences. This article will go deeply into the world of bathtubs, assisting you in choosing the right one for your needs and available space while also understanding the many different bathtub sizes and styles.

Different components of the bathtub

A typical drop-in style bathtub takes up more than 13 square feet of floor space and is a common fixture in many homes. Despite the fact that every bathtub is distinct, normal tubs have exterior dimensions that are roughly 60 inches long, 30 inches broad, and 14 to 16 inches high. These measurements are essential for the layout of your bathroom and the overall design. The material of a bathtub is also a component; alternatives range from fiberglass to cast iron, each of which offers a different bathing experience.
​
https://preview.redd.it/metr7luv3j0d1.png?width=612&format=png&auto=webp&s=5a65a381989af3c3630d85ed5ddf6acfaa1a58c9

The Importance of Bathroom Layout

Space Management

The space in bathroom facilities is usually insufficient, especially in metropolitan settings. It follows that thorough planning of your region is necessary. Every inch counts，The location of the bathtub, its closeness to other fixtures, and ensuring mobility all depend on careful space design. Even in very small bathrooms, it’s imperative to leave at least 12 inches between the edge of the tub and any fixtures. As a consequence, the user feels more comfortable while still maintaining functionality.

Tips for Smart Positioning

When positioning the standalone tub, elegance and function must be combined. In smaller bathrooms with constrained space, it’s critical to ensure that the freestanding tub doesn’t impede mobility. The standalone tub’s edge should be kept at least 12 inches away from other fixtures. By having an open floor area that is at least 24 inches wide around the freestanding tub, the bathroom might appear bigger and less crowded. Never forget that striking a balance between design and utility is crucial.

Different Types of Bathtubs and Their Sizes

Alcove Bathtubs

Many homeowners select alcove bathtubs, which are identified by their location within a space limited by three walls. They are frequently the best choice for tiny or typical-sized bathrooms. These baths are normally between 30 and 36 inches broad and 5 to 6 feet long. The front panel of the design—often referred to as an apron—is typically finished, and the surrounding walls are intended to cover the remaining three sides. When thinking about an alcove bathtub, it’s critical to precisely measure the available space to make sure the tub will fit properly while yet allowing enough room for mobility. An alcove bathtub is set against the far side, so the two long walls form the ends and back of the bathroom.

Drop-in Bathtubs

Drop-in bathtubs have a luxurious appearance and are made to fit into a built-in deck with tile or similar material covering the top and exposed sides. In larger bathrooms, the tub deck can fit into a room corner and be left exposed on two sides. Drop-in bathtubs don’t have factory-finished sides like alcove bathtubs do. Instead, they are made to slide into a deck cutout, much like a drop-in sink slides into a vanity countertop. Depending on the size of your bathroom and your preferred design, these large bathrooms can be placed in a variety of locations. However, because the built-in deck can occupy a sizable amount of area, they work best in larger settings.

Oval Bathtubs

Oval baths are considered to be elegant and luxurious. They are available in freestanding or drop-in variants. Despite appearing to be large, they are often only wider than normal bathtubs, not longer. If you’re thinking about getting an oval bathtub, it’s important to consider the extra width, especially if you choose a drop-in model. This entails building a bigger apron for the tub to rest on, which may change how your bathroom is organized in general.

Whirlpool Bathtubs

Whirlpool baths are the epitome of spa-like indulgence. Many of these are available in typical alcove-ready sizes, but they may look bigger than standard tubs. Jetted whirlpool mechanisms can be installed without increasing the footprint. The jets in these corner tubs provide a massage-like effect, making them perfect for anyone looking for a peaceful bathing experience. When considering installing a whirlpool bathtub, it’s critical to consider the additional plumbing requirements and check that the bathroom has adequate space for the tub.

Corner Bathtubs

Corner bathtubs are all about luxury and relaxation. They are great for folks who prefer reading in the tub or watching television on the wall. Because they are often square in shape with one corner chopped off, these bathtubs are a good choice for large bathrooms with plenty of space. They can be configured in many ways, such as a triangle shell or a drop-in tub attached to a triangular deck.

Freestanding Bathtubs

Bathtubs that stand alone and are not confined by walls or installed in alcoves are known as freestanding fixtures. They can be purchased in many different designs, such as modern pedestal tubs and traditional classic models. They offer positional flexibility and could act as the centerpiece of a bathroom’s decor. Freestanding bathtubs may be a fantastic alternative for people with mobility concerns or areas with plenty of senior citizens. However, they do require more space all around—typically an extra 3 inches on each end and 4 inches on each side. Even though they provide for creative flexibility, they are therefore best suited for larger bathrooms or those with a layout that can handle a tub of this size.
Do you feel dazzled by too many styles? That’s okay, I’ve prepared a form for you to choose the bathtub that’s best for you based on your situation.
​

Type	Features	Advantages	Disadvantages	Best Used For	Typical Size (LxW)	Recommendation Index (1-5)
Alcove	• Bounded by three walls• Finished front panel	• Space-efficient• Common choice• Versatile	• Limited design flexibility	Small or standard-sized bathrooms	5-6 feet x 30-36 inches	✩✩✩✩
Drop-in	• Fits into a deck• Exposed top and sides	• Luxury feel• Design flexibility	• Requires larger space• Deck construction needed	Spacious bathrooms with custom designs	Varies	✩✩✩
Oval	• Wider design• Drop-in or freestanding	•Luxurious•Elegant design	• Requires more width• Not necessarily longer	Bathrooms aiming for a luxury aesthetic	Wider than standard	✩✩✩✩
Whirlpool	• Jetted mechanisms• Often alcove-ready	•Therapeutic• Spa-like experience	• Additional plumbing• May require more space	Those seeking therapeutic bathing	Often standard sizes	✩✩✩✩
Corner	• Square with one corner off• Spacious	• Luxurious• Ideal for lounging	• Requires ample space• Specific positioning	Primary bathrooms with ample space	Varies	✩✩✩
Freestanding	•Standalone•No need for walls or alcoves	• Design flexibility• Centerpiece potential	• Requires more surrounding space	Larger bathrooms or open layouts	Varies + extra space	✩✩✩✩

​

Regulatory Guidelines on Bathtub Spacing

Code for International Buildings

It’s not just about aesthetics or personal preferences when planning the arrangement of your bathroom; it’s also about following the International Building Code (IBC). This code is more than simply a list of rules; it’s a well-thought-out framework meant to assure safety and functionality. The IBC frequently specifies the basic minimum distance between bathtubs, emphasizing the significance of user safety and comfort.
For example, the IBC may specify the exact inches of space necessary between the tub’s edge and other fixtures or walls. While these standards may appear to be strict, they are there for a purpose. By collaborating with them, you ensure not just a complaint but also a user-friendly and comfortable bathroom. Following these recommendations, in my experience, can save a lot of money.

Local Regulations

While international standards such as the IBC give a wide foundation, local building rules add an additional degree of complication. These regulations can be fairly varied, reflecting the distinct demands and considerations of many locations. They may go into topics ranging from plumbing complexities to the kind of bathtub materials considered suitable. These municipal rules might feel restricting at times, especially if you have a certain goal in mind.
However, keep in mind that they frequently result from the collective expertise of local specialists who understand the region’s particular issues and demands. Before starting a bathroom remodeling or installation project, especially if you want anything extravagant like a whirlpool or a custom-made bathtub, it’s a good idea (and often illuminating) to speak with local authorities or experienced builders. They can offer insights that blend regulatory knowledge with practical experience, ensuring your bathroom is both compliant and captivating.

The Future of Bathtub Sizes

Bathtub forms and types vary according to home. We should expect greater innovation in bathtub features and sizes as spa-like experiences and the tiny house movement grow more popular. Individuals looking to improve their bathing experience may find exciting alternatives in the future, ranging from eco-friendly materials to bathtubs with built-in digital capabilities. Whether you have a large or small bathroom, the market is likely to offer a bathtub that meets your needs.

Conclusion

Choosing the ideal bathtub is a highly emotional adventure, not merely a practical one. It’s about integrating a work of art into one’s life rather than just fitting a tub into a room. The key factor in your choosing is what resonates with you, even though your bathroom’s size, the design of your bathtub, and even the confusing local construction rules all play a part. There are a variety of options, each telling a unique tale, ranging from the snug alcove baths to the grandiose freestanding ones. I would advise someone who believes in the power of personal spaces to thoroughly research the many bathing possibilities while also listening to their emotions. Because your bathtub won’t simply be another feature in your house; it’ll become a beloved haven once you achieve that ideal balance between practicality and heartfelt design.

Bathroom sinks, formerly thought to be merely functional, have grown into a focal point of design and innovation. With so many alternatives, homeowners can now choose from a variety of sinks that not only perform their primary job but also improve the aesthetic appeal of their bathrooms. This comprehensive guide to different types of sinks will help you understand the choices you have as you tackle your bathroom remodel project. If you’re looking to equip your bathroom with usability, but also a unique edge, then a stone basin, one of the types of sinks, is your best option. The beautiful aspect of a stone basin is that they are made from a natural material, ultimately giving your bathroom a natural aura.

The Evolution of Bathroom Sink Designs

​
https://preview.redd.it/z1lsb8422j0d1.png?width=612&format=png&auto=webp&s=d141d84093c2169f25624494f7995454f5b0682d
Bathroom sinks have seen significant change over time, evolving from simple practical components to intricate design components. Throughout the Victorian period, pedestal sinks were employed as an elegant accent in the bathrooms of several magnificent homes. These sinks encapsulate the elegance of the time with their complex structures and ceramic or porcelain the surfaces.
Trends in architecture and interior design have had an effect on bathroom sink design. Modern times have seen a rise in the appeal of simple, minimalist designs, and wall-mounted sinks are swiftly catching on. Both visual and functional changes were made. Contemporary sinks must be streamlined and small because space is sometimes at a premium in these houses.Due to the twin demands of function and design, a broad variety of sink solutions have been produced, each of which satisfies a specific set of needs and preferences.
Today’s homeowners have a wide range of alternatives for sink designs, materials, and methods of installation so that their bathrooms may both appropriately serve their personal tastes and critical purposes.

Drop-in Bathroom Sinks

Consider a drop-in sink, also known as a self-rimming sink, for the bathroom as a basin that you just “drop” into a hole in the bathroom counter. It is secured in place by a rim or edge that rests on top of the counter. With a drop-in sink, you don’t need to change your modern bathroom around or destroy your countertop. It’s easy to install —drop it in, and the outer rim of the sink will prevent it from falling through. You may easily find one that matches the surface of your counter, or you can select something different. Drop-in sinks are a popular option for many individuals since they are quite adaptable and simple to install.

Benefits of Choosing Drop-in Sinks

The main advantage of integrated sinks is their seamless design, which not only looks stylish but also offers practical benefits. No seams or joints mean there are fewer places for dirt and debris to accumulate, making cleaning easier. Additionally, the unified design provides a more streamlined and modern look, enhancing the overall aesthetic of the bathroom.

Undermount Bathroom Sinks

Unlike recessed sinks, undermount sinks are positioned beneath the counter. It appears as though the countertop and sink are seamlessly integrated. Wall-mounted sinks are popular for modern bathrooms because of their sleek, modern design. They are often composed of stainless steel, ceramic, and porcelain.

Advantages Over Other Sink Types

Like undermount sinks, the fundamental benefit of undermount sinks is that they are simple to clean. Cleaning becomes more efficient since there are no ledges or edges on the counter, allowing rubbish to be wiped directly into the under-mount sink. Additionally, their seamless form creates a more streamlined and contemporary appearance, improving the bathroom’s overall appeal. However, the countertop material must be water-resistant because the sink’s edges will be in contact with water.

Wall-Mounted Bathroom Sinks

Wall-mounted sinks are, as the name implies, simply fixed to the wall and don’t need a countertop or vanity. This straightforward, room-saving design, which is popular in offices, has gained popularity in restrooms.
Wall-mounted sinks, including ceramic, porcelain, and stainless steel options, are a popular choice for people who seek a minimalist design and wish to maximize floor space. These sinks mount directly to the wall with no floor support, attaching to special hanger brackets fastened to the wall and to framing members or a wall reinforcement behind the sink. Plumbing waste and supply lines may either be exposed or concealed in a “shroud” or cover fastened to the underside of the sink. Wall-mounted sinks offer a sleek and modern look, making them a great addition to any bathroom.

Key Advantages of Wall-Mounted Sinks

Space savings is the main benefit of a wall-mounted sink. These sinks are perfect for small bathrooms with constrained floor space because they lack a vanity and countertop. Additionally, the absence of storage beneath makes cleaning the bathroom floor simpler. They are an attractive choice for people seeking a contemporary and eye-catching bathroom design due to its straightforward design and appealing aesthetics.

Corner Bathroom Sinks

Because of space-saving design, corner sinks are made to tuck neatly into a bathroom corner. These sinks are often wall-mounted but can also stand alone. Corner sinks are perfect for tiny bathrooms or restrooms with limited space, including smaller bathrooms. These are available in a range of materials, such as ceramic and porcelain. They can also be perfect for big bathrooms with little counter space but enough of extra space in a vanity or closet.

Where to Best Utilize Corner Sinks

Corner sinks are best suited for bathrooms where space efficiency is vital due to their compact shape. They are ideal for powder rooms or guest bathrooms where a full-sized vanity would not fit. Additionally, their unique establishment makes it possible to make use of bathroom corners, that are generally underutilized, more efficiently.

Integrated Bathroom Sink/Countertop

A form of sink called an integrated sink, often referred to as a multipurpose sink, merges the sink and countertop into a single piece. This design gives it a seamless appearance by seamlessly blending the sink and countertop together without any cracks or connections. Undermount sinks are popular with homeowners searching for a contemporary, coordinated bathroom décor because they offer a modern appeal and are constructed of materials like quartz, granite, and solid surface. conclude.

Benefits of the Integrated Design

Integrated sinks are the pinnacle of contemporary bathroom architecture. Their immaculate, seamless appearance is a utilitarian marvel in addition to being beautiful to look at. You are freed from the tiresome chore of cleaning out hidden filth and grime because there aren’t any annoying seams or joints. It alters the course of cleansing. Additionally, the modern beauty of integrated sinks’ slim design elevates any bathroom to the status of a design marvel.

Flat Bathroom Sinks

Flat sinks are a breath of fresh air in the world of bathroom aesthetics. Eschewing the conventional deep basin, these avant-garde trough sinks, with their flat or subtly sloped surfaces, ensure water gracefully flows directly to the drain. Crafted from exquisite materials like ceramic, porcelain (also known as vitreous china), stainless steel, and copper, they radiate a contemporary charm. For homeowners with an eye for the unique, flat sinks are an undeniable statement piece.

Advantages of the Flat Sink Design

Flat sinks are revolutionary. With their sleek, modern flair, they audaciously defy the venerable conventions of sink design. They not only serve as the focal point of the bathroom, but they are also brilliantly designed in other ways. They have less curves and corners to deal with when cleaning because of their flat design. The aesthetically pleasing design and practical functionality make upkeep simple.

What are the latest trends in bathroom sink designs?

Speaking from a wealth of experience in bathroom design, it’s fascinating to witness the evolution of sinks from mere functional entities to pivotal design elements. The current design landscape is witnessing a discernible shift towards minimalist, space-efficient models, with wall-mounted and flush-mounted sinks stealing the limelight. The allure of materials like quartz, granite, and solid surfaces is on the rise, as they masterfully marry durability with aesthetic charm. The design world is also abuzz with the seamless elegance of integrated and built-in sinks, marking a trend that’s gaining considerable traction. A word to the wise for those considering these sinks – ensure your faucet boasts enough height to gracefully arch over the top of your vanity.

Conclusion

Drawing from my extensive experience in bathroom aesthetics, selecting the perfect sink is an art that balances functionality with design finesse. Today’s market is brimming with choices, empowering homeowners to find a sink that isn’t just about utility but also a reflection of their personal style. Whether you’re inclined towards the timeless charm of a built-in sink or the contemporary allure of a flush-mounted one, rest assured there’s a masterpiece waiting to resonate with your design sensibilities.
​

Sink Type	Design Features	Installation & Appearance	Material Options	Benefits	Best Suited For
Pedestal Sinks	Classic, often ornate designs reflecting Victorian elegance	Freestanding, often with ceramic or porcelain finishes	Ceramic, Porcelain	Elegance, Aesthetic Appeal	Stately, Victorian Homes
Drop-in Sinks	Designed to “drop into” a hole in the countertop, with the rim holding it in place	Top-mounted, versatile in design, compatible with most countertop materials	Ceramic, Porcelain, Stainless Steel	Easy Installation, Affordable, Variety in Design, Raised Rim prevents spillage	Any home, especially for DIY enthusiasts
Undermount Sinks	Installed from below the countertop, offering a seamless look	Sleek, modern appearance, preferred for contemporary bathrooms	Ceramic, Porcelain, Stainless Steel	Easy Cleaning, Streamlined Look, Enhanced Aesthetics	Modern, Contemporary Bathrooms
Wall-mounted Sinks	Mounted directly to the wall, no need for a countertop or vanity	Minimalist, space-saving, often seen with exposed plumbing for an industrial touch	Ceramic, Porcelain, Stainless Steel	Space Saving, Easy Floor Cleaning, Modern Look	Small Bathrooms, Commercial Settings
Corner Sinks	Designed to fit snugly into a corner	Often wall-mounted, space-saving	Ceramic, Porcelain	Optimal use of limited space, Ideal for compact areas	Powder Rooms, Small Bathrooms
Integrated Sinks	Combine the sink and the countertop into a single piece	Seamless, contemporary look, flows without breaks or joints	Quartz, Granite, Solid Surface	Seamless Design, Easy Cleaning, Modern Look	Modern Bathrooms seeking cohesive design
Flat Sinks	Rejects the traditional basin model, featuring a flat or slightly sloped surface	Unique, modern look, focal point in the bathroom	Ceramic, Porcelain, Stainless Steel	Unique Design, Less Surface Area to Clean, Modern Look	Homeowners looking for a break from tradition
Latest Trends	Move towards more minimalist and space-saving designs, focus on seamless designs	Wall-mounted and flat sinks gaining popularity, integrated and undermount sinks becoming more prevalent	Quartz, Granite, Solid Surface	Durability combined with aesthetic appeal, Enhanced Functionality and Design	Modern, Contemporary Bathrooms

​

Hello!
Debating on how best to add lights to this bathroom vanity setup. We were planning on doing two mirror with sconces on the side, but might not have enough room on the far sides with mirrors being centered on sinks. You can kind of see the current setup with the two power boxes for each mirror (one is hidden in the glare, sorry), but not sure how that will work. Have any good ideas? What about something like the bottom picture? You can see the sconces mounted on the wall next to the mirror (in the reflection).
https://preview.redd.it/0248qfciri0d1.jpg?width=729&format=pjpg&auto=webp&s=fdda0de20f903cdce9cfb49a0f4587d0fd9f43a0
https://preview.redd.it/uoknre9iri0d1.jpg?width=1576&format=pjpg&auto=webp&s=a238962eecc2883c798554ad504a6e16efd9e145
Would something like this work? Sconce mounted on each of the walls to left and right of sinks. (You can see sconce in reflection of mirror)
https://preview.redd.it/slyc90z3si0d1.jpg?width=904&format=pjpg&auto=webp&s=51ed3694e4503af165248b8b5b4a3c6fb2b29409

$9,500 1987 Ford e350 on Thomas body. 21’ long. -Gas Engine- v8 5.8 351 gas, carburetor.-75k miles. -Buffalo NY but spent most time in Georgia - very little rust-New front tires-400w solar to a bluetti AC200 battery -Sink plumbing only, no bathroom -Diesel Heater-Back window cracked but doesn’t leak -Fits in standard parking space-Slow power steering leak- needs top ups monthly -Cedar insulated walls, insulated floor with marine plywood under vinyl tile. Stays very cool when windows covered.

• Traveled the country in this bus with my two cats for a year. She got up and over mountains with ease, and maintains speeds over 70mph on flatlands no problem. I’m selling because I’m done traveling and the bus yearns for the road. Would you take her on her next adventure?

I am installing a utility sink in my basement with a zoeller utility pump. I want to tie the discharge line from the pump into my nearby shower drain. I'm planning to connect into it with a rolled Wye fitting, plus a 45 and 90 degree fitting to get me back vertical into the ball valve shown in the picture.
This is my first plumbing job, so was hoping some feedback before I cut into my shower drain piping.
https://preview.redd.it/ezzm0sy5nh0d1.jpg?width=1512&format=pjpg&auto=webp&s=dde198b829e92b812ba6230a1f83a35ed9577e2b

We are moving into a new apartment in a building we will be managing.
We were so thrilled to be able to choose our own reglaze colopattern however i believe there was a miscommunication at some point because they reglazed the sink, which should have been done in white but was done with the same pattern as the vanity top.
I don't know how to feel. I absolutely love the pattern we chose just not on the sink. I wanted the contrast and now it's a blob of pattern.
Correcting may not be possible as i doubt i will get the approval to do so and we also move in Friday.