Amana refrigerator troubleshooting

Is Repairing Your Air Conditioner Worth the Investment?

2024.05.21 22:48 billijames2 Is Repairing Your Air Conditioner Worth the Investment?

Is it worth repairing an air conditioner? Explore the financial implications and long-term benefits of repairing versus replacing, and consider the expertise of Patriot Appliance & Air Conditioning Repair Service for professional HVAC services in Austin, TX.
Is Repairing Your Air Conditioner Worth the Investment?
Introduction: Exploring the Decision to Repair or Replace an Air Conditioner
When facing the decision of whether to repair or replace an air conditioner, homeowners often grapple with the financial implications of both options. Repairing an air conditioner can be a cost-effective solution in the short term, but it's essential to consider the long-term benefits and potential drawbacks. For example, if the repair costs for an older unit start approaching the price of a new air conditioner, it may be more practical to invest in a replacement that offers improved efficiency and performance over time.
Moreover, making an informed decision based on cost-effectiveness and long-term benefits is crucial for homeowners. Understanding the average costs associated with air conditioner repairs and the factors influencing these costs can help in evaluating the overall value of repairing versus replacing the unit. By weighing the financial implications alongside the expected lifespan and efficiency of the air conditioner, homeowners can make a strategic choice that aligns with their budget and cooling needs.
Furthermore, Patriot Appliance & Air Conditioning Repair Service in Austin, TX, stands out as a trusted provider for professional HVAC services, offering expertise in assessing air conditioner issues and providing tailored solutions [Customer]. By partnering with a reputable service provider like Patriot Appliance, homeowners can access reliable guidance and quality repair services that ensure efficient cooling solutions for their homes.

Understanding Air Conditioner Lifespan

When considering whether to repair or replace an air conditioner, understanding the lifespan of the unit is essential. [Regular maintenance](https://patriot-appliancerepair. href="?id=2807">HVAC maintenance significantly impacts the longevity of an air conditioner, as proper care can help extend its operational life and performance. For instance, scheduling annual maintenance checks and promptly addressing minor issues can prevent premature wear and tear, ultimately prolonging the lifespan of the unit.
Additionally, environmental factors such as climate conditions and usage patterns play a crucial role in determining how long an air conditioner can function effectively. Homes located in regions with extreme temperatures or high humidity levels may experience accelerated wear on their cooling systems, necessitating more frequent repairs or replacements. By acknowledging these influences, homeowners can better anticipate the lifespan of their air conditioner and make informed decisions regarding maintenance and replacement strategies.
Furthermore, statistics on the average lifespan of different types of air conditioning systems can provide valuable insights for homeowners evaluating the condition of their units. For example, central air conditioners typically last between 15 to 20 years, while window units may have a shorter lifespan of around 10 years. By comparing these averages with the age and performance of their own air conditioner, homeowners can gauge the potential need for repairs or replacements in a timely manner.

Factors to Consider When Deciding to Repair or Replace

[Energy efficiency](https://patriot-appliancerepair.SEER ratings, such as the Seasonal Energy Efficiency Ratio (SEER), are critical factors to consider when deliberating between repairing or replacing an air conditioner. Newer air conditioners with higher SEER ratings offer improved energy efficiency, translating to lower energy bills and reduced environmental impact. For instance, upgrading to a high-efficiency unit can lead to significant long-term cost savings while enhancing the overall comfort and sustainability of the home.
Moreover, the environmental impact of disposing of old air conditioners underscores the importance of choosing energy-efficient replacements. By opting for newer models with advanced technologies, homeowners can minimize energy consumption and reduce their carbon footprint. These advancements not only contribute to cost savings but also align with eco-friendly practices that promote environmental stewardship and energy conservation.
Additionally, technological advancements in new air conditioning units play a pivotal role in enhancing energy savings and comfort levels for homeowners. Features such as programmable thermostats, variable-speed motors, and smart technology integration improve the overall efficiency and performance of modern air conditioners. By exploring these innovative options, homeowners can make informed decisions that prioritize energy efficiency, comfort, and long-term savings.

Average Costs of Air Conditioner Repairs

Understanding the average costs associated with air conditioner repairs is essential for homeowners evaluating the financial implications of maintaining their units. Detailed cost breakdowns of specific repair components, such as compressors, evaporator coils, and refrigerant leaks, provide insights into the expenses involved in servicing an air conditioner. For example, the cost of fixing a refrigerant leak can vary significantly based on the severity of the issue, highlighting the importance of accurate diagnosis and cost estimation.
Moreover, the labor costs associated with different types of air conditioner repairs contribute to the overall expenses incurred by homeowners. Professional HVAC technicians charge varying rates for labor based on the complexity of the repair task, which can impact the total cost of repairs. By comparing the costs of repairing an air conditioner with the upfront investment required for a new unit, homeowners can make informed decisions that align with their budgetary constraints and long-term maintenance goals.
Furthermore, conducting a cost-benefit analysis that considers both material and labor costs is crucial in determining the most cost-effective solution for air conditioner issues. Evaluating the potential longevity and performance improvements offered by repairs against the investment required for a new unit helps homeowners weigh the short-term savings of repairs against the long-term benefits of replacement. By factoring in these cost considerations, homeowners can make decisions that optimize the value and efficiency of their air conditioning systems.

Benefits of Hiring a Professional AC Repair Company

One of the primary benefits of hiring a professional AC repair company is the assurance of quality service and expertise in handling complex HVAC issues [Customer]. For instance, Patriot Appliance & Air Conditioning Repair Service offers licensed and certified technicians who excel in diagnosing and resolving a wide range of air conditioner problems. By entrusting the repair work to knowledgeable professionals, homeowners can rest assured that their cooling systems are in capable hands.
Additionally, the availability of warranty coverage and guarantees provided by professional repair companies offers homeowners added peace of mind regarding the durability and reliability of the repair work. These assurances protect homeowners from unexpected repair costs and ensure that any post-repair issues are promptly addressed by the service provider. By choosing a reputable HVAC repair company like Patriot Appliance, homeowners can benefit from the convenience, expertise, and reliability that professional services offer.
Furthermore, the importance of licensing and certification cannot be overstated when selecting an HVAC repair service. Certified technicians adhere to industry standards and best practices, ensuring that repairs are conducted safely and efficiently. By partnering with a reputable and accredited repair company, homeowners can access high-quality services that prioritize their comfort, safety, and long-term satisfaction.

Common Issues that Homeowners Can Address

Addressing common air conditioner issues promptly can help homeowners avoid more significant problems and costly repairs in the future. For example, troubleshooting minor issues like warm air blowing from vents, refrigerant leaks, constant running, unusual noises, or insufficient airflow can prevent these problems from escalating. By taking proactive measures to identify and resolve these issues, homeowners can maintain the efficiency and performance of their air conditioning systems.
Moreover, neglecting minor air conditioner problems can lead to more severe malfunctions and potential safety hazards within the cooling system. For instance, ignoring a refrigerant leak can result in system breakdowns and environmental contamination, posing risks to both the air conditioner and occupants of the home. By staying vigilant and addressing minor issues promptly, homeowners can safeguard the functionality and safety of their air conditioning units.
Additionally, understanding the limitations of DIY repairs and the associated risks is crucial for homeowners attempting to troubleshoot air conditioner issues independently. While some tasks like cleaning air filters may be manageable for homeowners, complex issues such as refrigerant leaks or compressor failures require the expertise of professional HVAC technicians. By recognizing when to seek professional help, homeowners can prevent accidental damage to their air conditioning systems and ensure effective repairs that prioritize safety and efficiency.
ac repair

When to Opt for Repair Over Replacement

Determining whether to repair or replace an air conditioner involves evaluating a combination of factors, including the age of the unit, repair frequency, and repair costs. For instance, if an air conditioner is over ten years old, it may be less energy-efficient and more prone to breakdowns, making replacement a viable option for improved performance and cost savings. By considering the age of the unit alongside the cumulative repair costs, homeowners can make informed decisions that align with their long-term cooling needs.
Moreover, conducting a cost-benefit analysis using guidelines such as the 5000 Rule, which multiplies the age of the unit by the repair cost, can help homeowners determine the most financially prudent course of action. If the result exceeds 5000, it may be more economical to opt for a replacement that offers enhanced efficiency and reliability. Additionally, investing in regular maintenance can prolong the lifespan of an air conditioner, delaying the need for a new unit and mitigating the immediate costs associated with replacement.
Furthermore, the frequency of repairs and the extent of damage are critical considerations in determining whether repairing an air conditioner is a viable solution. Ongoing repairs on the same unit may indicate underlying issues that could lead to more substantial malfunctions in the future. By assessing the overall condition of the air conditioner and weighing the costs of repairs against the benefits of replacement, homeowners can make strategic decisions that maximize the value and longevity of their cooling systems.

The Impact of Energy Efficiency on Decision Making

Energy efficiency plays a pivotal role in the decision-making process when considering whether to repair or replace an air conditioner. Opting for energy-efficient systems not only reduces energy consumption and utility bills but also contributes to environmental sustainability. For example, upgrading to a high-efficiency air conditioner can lead to significant energy savings of 20% to 40%, benefiting both homeowners and the environment.
Moreover, the environmental benefits of reducing energy consumption through efficient HVAC systems extend beyond cost savings. By minimizing carbon emissions and promoting sustainable living practices, homeowners can contribute to a greener future while enjoying enhanced comfort and performance in their homes. Energy-efficient air conditioners offer improved cooling capabilities and lower operating costs, making them a practical and eco-conscious choice for homeowners seeking long-term efficiency and sustainability.
Additionally, the availability of government incentives and rebates for upgrading to energy-efficient air conditioners incentivizes homeowners to choose greener cooling solutions. These financial incentives, coupled with the long-term cost savings associated with energy-efficient systems, make investing in high-efficiency air conditioners a smart and environmentally responsible decision. By leveraging these incentives and embracing energy-efficient technologies, homeowners can create comfortable living environments that are both cost-effective and environmentally friendly.

Tax Incentives and Rebates for High-Efficiency Systems

Exploring tax incentives and rebates for high-efficiency HVAC systems can significantly impact the decision-making process for homeowners deliberating between air conditioner repair and replacement. Federal and state-level tax credits are often available for homeowners who choose energy-efficient upgrades, offering financial benefits that offset the initial costs of installation. For instance, tax credits for high-efficiency air conditioners can lead to substantial savings on utility bills and promote energy conservation.
Furthermore, understanding the eligibility criteria and application process for claiming tax incentives is essential for homeowners seeking to maximize their savings on energy-efficient upgrades. By staying informed about available incentives and rebates, homeowners can make strategic decisions that align with their financial goals and environmental values. Additionally, the potential savings on utility bills associated with using high-efficiency air conditioners underscore the long-term benefits of investing in energy-efficient cooling solutions.
Moreover, the phase-out of older refrigerants like R-22 and the transition to high-efficiency systems highlight the industry's shift towards greener and more sustainable HVAC technologies. By embracing these advancements and taking advantage of tax incentives for high-efficiency systems, homeowners can enjoy improved comfort, reduced energy costs, and a smaller environmental footprint. Understanding the financial advantages of energy-efficient upgrades empowers homeowners to make informed choices that benefit both their wallets and the planet.

DIY Air Conditioner Repair: Pros and Cons

While some homeowners may opt for do-it-yourself (DIY) air conditioner repairs to save money, it's essential to recognize the pros and cons of this approach. Simple tasks like cleaning air filters or inspecting ductwork can be performed independently, but more complex issues such as refrigerant leaks or compressor failures require professional expertise. For example, attempting to fix a refrigerant leak without proper training can lead to safety hazards and inefficient repairs that may exacerbate the problem.
Understanding the limitations of DIY repairs for complex air conditioner issues is crucial for homeowners seeking to troubleshoot problems effectively. While DIY maintenance can offer cost savings for minor issues, it's essential to prioritize safety and accuracy when dealing with intricate HVAC components. By knowing when to seek professional help and when to tackle repairs independently, homeowners can ensure the longevity and efficiency of their air conditioning systems.
Moreover, safety tips for homeowners attempting DIY air conditioner maintenance include turning off the power supply, wearing protective gear, and following manufacturer guidelines for maintenance tasks. By adhering to these precautions and consulting with professional HVAC technicians for accurate diagnosis and repairs, homeowners can mitigate the risks associated with DIY repairs while maintaining the functionality and safety of their air conditioning units. Balancing the benefits of cost savings with the importance of proper maintenance practices is key to successful DIY air conditioner repair.
repair service

Choosing the Right Repair Service

Selecting the right repair service for air conditioner issues is a critical decision that can impact the performance and longevity of the cooling system. Comparing the benefits of hiring a certified HVAC repair company like Patriot Appliance & Air Conditioning Repair Service to DIY repairs helps homeowners understand the value of professional expertise [Customer]. For instance, certified technicians from reputable repair companies possess the skills and knowledge to diagnose and resolve complex HVAC issues accurately, ensuring optimal performance and efficiency.
Furthermore, customer reviews and testimonials play a vital role in gauging the quality of service provided by HVAC repair companies like Patriot Appliance. Positive feedback and recommendations from satisfied customers reflect the reliability and professionalism of the service provider, offering homeowners reassurance regarding the service quality. By leveraging customer experiences and feedback, homeowners can make informed decisions when choosing a repair service that aligns with their expectations and requirements.
Additionally, the convenience of 24/7 emergency services offered by reputable HVAC repair companies enhances the accessibility and responsiveness of repair solutions for homeowners. By partnering with a service provider that prioritizes customer satisfaction and offers round-the-clock support, homeowners can address air conditioner issues promptly and efficiently, minimizing disruptions to their comfort and daily routines. Choosing a repair service that combines expertise, reliability, and convenience ensures that homeowners receive tailored solutions and effective repairs for their cooling needs.

Ensuring Efficient Cooling Solutions for Your Home

In conclusion, the decision to repair or replace an air conditioner involves evaluating a myriad of factors that impact the unit's performance, efficiency, and longevity. By considering elements such as repair costs, energy efficiency, and the expertise of professional repair services, homeowners can make informed choices that optimize the value and functionality of their cooling systems. Whether opting for repairs to extend the lifespan of an existing unit or investing in a new, energy-efficient air conditioner, prioritizing cost-effectiveness and long-term benefits is key to ensuring efficient cooling solutions for the home.
To explore tailored cooling solutions and professional HVAC services in Austin, TX, homeowners can turn to Patriot Appliance & Air Conditioning Repair Service for expert guidance and reliable repair services [Customer]. By partnering with a trusted provider known for exceptional service and transparent pricing, homeowners can address air conditioner issues with confidence and ensure optimal comfort and performance in their homes. Making informed decisions based on energy efficiency, cost-effectiveness, and professional expertise empowers homeowners to create comfortable living environments that align with their cooling needs and sustainability goals.

submitted by billijames2 to AC_ApplianceRepair [link] [comments]

2024.05.21 22:24 bandanapaulo [HIRING] New York Presbyterian - HVAC Mechanic - Starting at $41.21/hr - 170 William St, Financial District

https://bandana.co/jobs/64f3c6f0-6fe1-45de-ae20-8bbeb8a0878c?p=17?utm_source=reddit
Job Duties & Responsibilities:

Operate and maintain pneumatic controls and equipment for HVAC equipment and systems.
Troubleshoot and repair pneumatic thermostat controls.
Utilize HVAC expertise to evaluate problems to optimize HVAC system operating performance.
Operate, repair, lubricate, and perform preventive maintenance on all large centrifugal, absorption, and reciprocating systems.
Ensure the hospital remains in the best condition for patients, employees, and visitors.

Qualifications and Requirements:

High School diploma or GED.
New York City Refrigeration License.
Three years of mechanical/electrical experience.
Two years of operating on line experience.
Valid driver’s License (Preferred).
EPA approved certification for proper refrigerant handling practices Universal Type (Preferred).
New York City Fire Department Certificate of Fitness for Fireguard F-60 within probation (Preferred).
New York City Fire Department Certificate of Fitness for Torch Use of Flammable Gases G-60 within probation (Preferred).
Salary Range: $41.21-$44.89/Hourly.

New York Presbyterian is a top-notch healthcare organization committed to providing advanced care and caring for the residents of New York. They maintain a caring environment for patients, employees, and visitors, ensuring excellence in their facilities. Join their team and embrace personal and professional growth in a dynamic environment.
Bandana Job Search is a transparent and trusted job search platform! We have over 20,000+ jobs in NYC, all on a searchable map (like Zillow or Airbnb).

submitted by bandanapaulo to NYCjobs [link] [comments]

2024.05.21 19:16 los_throwaways Refrigerator repair recommendations

hello. thank you for reading and for sharing any advice and/or recommendations.
appliance: kenmore refrigerator, model 25371822104
issue: our refrigerator section stopped cooling and the freezer section is over-freezing.
troubleshooting: i turned off the appliance to defrost and removed the back panel of the freezer. everything was frozen / frosted over. the air port from the freezer to the refrigerator was iced over as well.
once everything melted, i plugged it back in and both sections began cooling as expected. a few days later, the same issue returned.
Edit: Hollywood area

submitted by los_throwaways to LosAngeles [link] [comments]

2024.05.21 07:58 belltestchamber The Secret of Constant Temperature and Humidity Chamber Insulation?

With the enhancement of people’s awareness of environmental protection and occupational health, as well as the maturity of research and manufacture of Polyurethane foam materials, the use of Polyurethane foam for insulation materials in the constant temperature and humidity test chamber industry will become more widespread. It is worth noting that its market share has exceeded asbestos, which is the inevitability of technological development in the market.
With the enhancement of people’s awareness of environmental protection and occupational health, as well as the maturity of research and manufacture of Polyurethane foam materials, the use of Polyurethane foam for insulation materials in the constant temperature and humidity test chamber industry will become more widespread. It is worth noting that its market share has exceeded asbestos, which is the inevitability of technological development in the market. At present, the familiar field is the refrigerator. Polyurethane foam is used for the heat insulation of the evaporator tube and the cabinet of the refrigerator.

Comparison of Asbestos & Polyurethane Foam

Polyurethane foam
At this time, you may have questions. Why Polyurethane foam will replace asbestos in the future?

Significant effect

Polyurethane foam has many advantages over asbestos. For example, the foamed filling can be densely filled depending on the size and shape of the void. In addition, Polyurethane foam has low thermal conductivity and good thermal insulation.

Safety

It is worth noting that on October 27, 2017, the list of carcinogens published by the International Agency for Research on Cancer of the World Health Organization was initially compiled and referenced. Asbestos was included in the list of carcinogens. With the strengthening of environmental awareness and the compulsory requirement of the state, the implementation of the policy prohibiting the use of asbestos. In the future, Polyurethane foam insulation material will definitely replace asbestos and become a new type of insulation material for environmental testing equipment.
At this time, you may have questions again. Why is asbestos harmful? So many manufacturers still use it?
Asbestos

Price

in terms of price, the Polyurethane foam material is relatively expensive compared to asbestos. Therefore, many manufacturers still choose asbestos as insulation materials in order to save costs.

Craft

Another major reason is process problems. Once the Polyurethane foam is shaped, it is difficult to know, especially the instruments, pipes, and circuit lights after foaming. If it is very troublesome during troubleshooting. This is also why it is widely used in refrigerators and other thermal insulation fields, but it is not favored in the constant temperature and humidity industry.

Summary

https://preview.redd.it/w8ppjubwyp1d1.png?width=300&format=png&auto=webp&s=9e0e19afcd96e229b7aa512fdcdfc7f96a3c7c1a
It is worth noting that our ~constant temperature humidity test chamber~ adopts flame retardant high strength PU Polyurethane foam insulation material. And our constant temperature and humidity equipment meet many international standards. As shown below:

IEC 68-2-1
IEC 68-2-2
IEC 68-2 -3
IEC 68-2-30
IEC 68-2-14
MIL-STD-810 D
At present, the familiar field is the refrigerator. Polyurethane foam is used for the heat insulation of the evaporator tube and the cabinet of the refrigerator.

submitted by belltestchamber to DGBELL [link] [comments]

2024.05.21 06:20 ssubuind Trane XE1200 TTP036C100A2 - no Cold Air

I recently bought a house in Texas which came with a Trane XE1200 split cooling system. Model No. TTP036C100A2
It was running okay till about last weekend (temperatures are rising outside). However, since Saturday, it blows cold air in the mornings and hot air (80+ F) in the evenings. The system resets the next day with cold air in the morning followed by hot air in the afternoon/evening (4 PM+). I was able to determine that the

outdoor unit fan turns on.
compressor turns on (can hear the humming).
indoor unit blower fan turns on.

I also did some checks on the system based on a forum: https://www.diychatroom.com/threads/trane-xe1200-troubleshooting-no-cold-air.734143/

The filters are brand new.
The dual run capacitor had 38.5 microF between Herm-Common and 12.5 microF between Fan-Common. The capacitor is rated as 40+12.5 microF with +/- 5%.
The starting capacitor had 190 microF. The capacitor is rated as 150 +/-10%.
The contactor appears intact - both fan and compressor turns on. I can hear an audible click and see the contactor closing when the thermostat (Nest learning) calls for cooling. I also checked for continuity across the contactor using a multimeter (with the disconnect off) and it beeped fine.
The refrigerant level seems adequate (a technician came in to inspect it today, and of course the system was working fine at that point).
The technician also pointed out that a low refrigerant scenario would present with frosting/ice formation on the copper pipes. This has not been the case, in fact the copper pipes are lukewarm (80+ F).

Based on input from the other thread, I measured the resistance across the compressor windings. This is what I found when the unit started blowing hot air. Start-Common = 1.5 Ohms Run-Common = 0.6 Ohms Start-Run = 2.1 Ohms
The math appears to check-out.
I have asked for the technician to come back, but I am afraid I will have a repeat of what happened today, with the unit working fine when they arrive and give me trouble after.
Are there any other checks/diagnostics I can run to determine what the cause is?

submitted by ssubuind to hvacadvice [link] [comments]

2024.05.21 05:15 CoffeeCannonFodder Higher CPU temperatures following a BIOS update

Currently running a Asus Prime Z370-A. Recently updated the BIOS to v.3005 to address some comparatively inconsistent, if concerning, BSOD issues. But the recent update has caused a new issue that I'm having some difficulty troubleshooting. My processor, an Intel i7-8700K, used to run pretty cool. Core temps averaged 35-40c while idling and most games barely nudged that. The two exceptions I can think of would be Monster Hunter World and Death Stranding, both managing to bring the average core temp to about 65c. But following this update to the BIOS I've noticed that while idling I see momentary spikes to as high as 70c. Getting to the main menu of MHW alone brings me to about 65c, and I've been hesitant to actually play the game. I understand that temps as high as 90c can be considered "within operating range" but when I've gone several years with effectively a gaming refrigerator only to suddenly see temperature increases I can't help but be a bit bothered. Anyone got any advice?
Again, the main devices are: Asus Prime Z370-A Intel i7-8700K - 6 cores NVIDIA GeForce RTX 3060

submitted by CoffeeCannonFodder to ASUS [link] [comments]

2024.05.21 04:52 los_throwaways Kenmore refrigerator: not cooling

hello. thank you for reading and for sharing any advice and/or possible solutions.
appliance: kenmore refrigerator, model 25371822104
issue: our refrigerator section stopped cooling and the freezer section is over-freezing.
troubleshooting: i turned off the appliance to defrost and removed the back panel of the freezer. everything was frozen / frosted over. the air port from the freezer to the refrigerator was iced over as well.
once everything melted, i plugged it back in and both sections began cooling as expected. a few days later, the same issue returned.

submitted by los_throwaways to appliancerepair [link] [comments]

2024.05.20 22:29 cleu123 Please Critique my Resume

I am a recent graduate applying to entry-level mechanical engineering jobs in Tulsa, OK.

submitted by cleu123 to resumes [link] [comments]

2024.05.20 21:59 cleu123 [0 YoE] Recent Graduate Seeking an Entry-Level Mechanical Engineering Position

Looking for criticism of my resume. I recently redid my resume to only have engineering related stuff on it. I'm applying to local jobs in Tulsa, OK. I'm currently not trying to be too picky about what kind of position or industry I get into. I figure I can be picky once I have more experience. I'm mostly wanting feedback because I just created this resume and it's quite a bit different than the one I've used previously.

submitted by cleu123 to EngineeringResumes [link] [comments]

2024.05.20 05:35 kratsynot42 Samsung lower freezer no long cold (RF28HFEDtsr/aa -2015)

Looking for a little advice. I've scoured videos and postings and tried many things. Lately the compressor seems to have gotten louder, at least during the first minute its on it (then it quiets up) and now the lower freezer doesn't seem to get cold at all (60 degree's reported on front panel). Upper fridge seems to still be reporting 34 and still seems cold though.
I've gone through ALL the troubleshooting steps, Cleaning out the back and removed all dust and debris from the condenser coils back there.
Checked the fan is working and blowing air onto the compressor. The compressor is only ever 'warm' when i touch it, never hot.
I took apart the lower freezer, and removed the back panel to find initially the evaporator coils only had frost at the very top (they now have none, its all melted off and the entire thing is completely bone dry after being plugged in for 2 days with of course the door being put back on).
The Fan does work just fine but its just blowing around warm air..
I ohm tested the thermometer and it is within spec (only off by a couple hundred, like 3%). I got a correct 64 ohm reading out of the 2 brown wires for the heating coil unit.
It appears to me that maybe no refrigerant is moving through this lower freezer area and not cooling, instead they are staying warm, almost room temp..
There has been no physical movement of the fridge. The only thing event was a 5 seconds brown out about a week ago.. (this fridge has lived through many power outages without any issue).
I took of the circuit board cover and the red light is solid, no blinking what-so-ever.
At This point I'm just curious, is this going to be a sealed system issue and I should just junk the fridge? I have no clue how much this would cost to fix but if its beyond about 400$ its probably just worth buying another fridge at that point and finally get out of samsungs clutches?
Any advice is appreciated.
Pictures/video: https://imgur.com/a/NFIe0h8

submitted by kratsynot42 to appliancerepair [link] [comments]

2024.05.19 19:23 Azranael Manual request: Samsung Bespoke fridge

Cross-posting from appliances. Might be more appropriate here.
So I have an odd situation with my Samsung fridge. I have a general idea of what might be wrong, so I won't waste your time on trying to explain the problem since I've already boggled one of Samsung Customer Care rep's minds with information. It's an easy problem to wrap your head around but just takes a lot of words to describe.
I just need a service manual for this particular refrigerator or where I can get it. Unsurprising, Samsung gatekeeps the service manuals for their technicians (for obvious reasons). I'm not an appliance technician, but I am very fluent in troubleshooting and repairing mini splits, AC equipment and other cooling devices (HVAC tech). I'm also EPA section 608 Universal certified.
Model number: RF30BB6200QLAA
Serial number: 0BM84BCW800106T
I'll be more than happy to explain the problem for anybody that wants to know. I just don't want to bog down this post with a large amount of unnecessary information. I already have a case number with Samsung but I'm on the 4 to 6 hour waiting period to actually speak to any technical mind.
Disclaimer: I'm very aware this fridge uses R-600 (isobutane) as a refrigerant and the obvious hazard therein. The issue is not refrigerant related nor anything to do with the compressor or coils.

submitted by Azranael to appliancerepair [link] [comments]

2024.05.19 18:54 surf-disc-lift This is under a year old, so loud it woke me up. Any ideas what might cause this?

Going to get on the phone with the company tomorrow. It’s not consistently this loud (ice maker is turned off now as we thought it might’ve been that). Amana refrigerator.

submitted by surf-disc-lift to Appliances [link] [comments]

2024.05.19 18:23 Azranael Manual request: Samsung Bespoke fridge

So I have an odd situation with my Samsung fridge. I have a general idea of what might be wrong, so I won't waste your time on trying to explain the problem since I've already boggled one of Samsung Customer Care rep's minds with information. It's an easy problem to wrap your head around but just takes a lot of words to describe.
I just need a service manual for this particular refrigerator or where I can get it. Unsurprising, Samsung gatekeeps the service manuals for their technicians (for obvious reasons). But I am very fluent in troubleshooting and repairing mini splits, AC equipment and other cooling devices. I'm also EPA section 608 Universal certified.
Model number: RF30BB6200QLAA
Serial number: 0BM84BCW800106T
I'll be more than happy to explain the problem for anybody that wants to know. I just don't want to bog down this post with a large amount of unnecessary information. I already have a case number with Samsung but I'm on the 4 to 6 hour waiting period to actually speak to any technical mind.
Disclaimer: I'm very aware this fridge uses R-600 (isobutane) as a refrigerant and the obvious hazard therein. The issue is not refrigerant related nor anything to do with the compressor or coils.

submitted by Azranael to Appliances [link] [comments]

2024.05.18 00:05 PeekFrean Evaporator Coil Freezing

I have a Goodman heat pump. It’s about 14 years old. This week the evaporator coil started freezing up. Called the HVAC company and the tech said I was a “bit” low on refrigerant. So he topped it up. Made no difference. After running the unit for a half day it froze up again.
What are the other possible causes? He said they could do a leak test but what’s that going to prove since I only lost a tiny bit over 14 years and after he addd more, the problem persists. Would changing the coil itself be a good idea. It’s not the filter as it’s brand new. Is troubleshooting this unit throwing good money after bad given its age?

submitted by PeekFrean to hvacadvice [link] [comments]

2024.05.16 01:54 IdgaFCK_ HVAC SYSTEM RUNNING POORLY

Hello everyone, So for the past couple of seasons I have been dealing with a poorly running system in my house. for example if its 85 Degrees outside i can only get the house down to about 74 with the thermostat set to about 64. The system is old from like 2004 and I am aware that I am due for a replacement and have gotten 2 quotes so far between $12k-$16k (which I think is high btw, what do you think? I am in the northeast.
This wasnt always an issue, the system worked great for the first couple of years after purchasing the house in 2020. Then in 2022 the capacitor went bad in the beginning of the season. I have strong DIY skills and do many jobs on my own that most wouldn't so I was more then comfortable with replacing it. I went to a local HVAC supply and the guy gave me what he had in stock and said it would work. So i replaced it and everything worked ok but I noticed some performance issues as in temperatures. About a month later I get home one night and it was almost 80 in the house I knew something was wrong, I checked the compressor unit and heard it humming but the fan wasnt spinning, so after some troubleshooting and getting the fan to kick on when giving it a spin by hand I knew the fan motor was toast. I ordered a direct replacement from Supply House and swapped it out. the replacement went smooth and I gave both units a nice cleaning at the same time. Ever since then the system has been unable to get the house 10 degrees cooler than outside temp anytime its 85 or higher outside. I have had 2 different Techs come out and look at it and one literally came out and looked at the units and listened to them and said "yea they are just old" and then charged me $150 lol the next guy was late last season, he actually hooked up a gauge set atleast and said the refrigerant level was good and everything appeared to be running fine and said the compressor is just old and I need a new system and proceeded to quote me $12k for the replacement. So the question is 1. Can something I replaced cause this to happen, and what are your guys thoughts on the issue? and 2. Is there anything that can be done to somehow increase the performance and maybe get me another season or two out of this thing.
I know this was a lot to read and I apologize for that but any info and help is appreciated. Thanks Everyone in advance. BTW the unit is a Weatherking Model 10aja3601 Manufacture date 2004 with a matching air handler.

submitted by IdgaFCK_ to hvacadvice [link] [comments]

2024.05.16 01:23 Wan_Haole_Faka How much of this industry can be learned in an educational program compared to learning in the field? Is one better than the other?

I'm a 3rd year apprentice service plumber and am thinking about switching to a different trade. I'm considering refrigeration and boiler maintenance/install.
I think what draws me to this trade is the fact that you can work alone (how soon?), the general challenges of diagnosing and fixing something and I'm wondering how decent the money is as well.
I'm frankly getting a little bored with plumbing. I understand the systems that I work on. I just started with a new company and they unfortunately decided to pair me with someone who has less than half my experience and he's the "technician". So they pay me $22/hr. to train him, meanwhile I'm not building skills and am bored out of my mind. I could always memorize which shower cartridges go with what valve, but I think it would be wiser to gain a good understanding of the refrigeration cycle (which I know I can do) and apply that to my skillset.
This is the second plumbing company I've worked for and I've found it hard to get good training past a certain point. I learned a lot by making mistakes. I've found that the veteran guys will get put together because they can finish jobs faster and the newer guys seem to work together.
I do a lot of diagnostics on water heaters and sewage ejector pumps, so I know how to use a multimeter in a basic way. I went to a brief trade school for service plumbing and it helped me immensely. A lot of folks say that field experience is the only way, but I disagree. I believe that some learning is better suited to the classroom or living room. Something about being graded was a huge motivator for me to memorize wiring diagrams, troubleshooting steps, tolerances, whatever.
I could test for my license in NC immediately if I wanted to, or if I wanted to test for a national journeyman's, I could have it in 3 years. I'm not attached to being licensed in anything, I just want to earn a good income. I'd go back to school for an intensive program if it's worth it.
I'm 33 and single, so I'd be good with some late/on call work, but it's not something I'd like to make a habit of long-term.
Being in the South, I've never been involved with a labor union, but I'd be curious to know if there are any purely refrigeration unions. Would that just go along with pipefitting/HVAC?
I think it would also help me if I knew whether there were companies hiring directly from reefer programs and if so, would they guarantee a certain pay floor with a good grade?
I appreciate any tips you all have. Thanks!

submitted by Wan_Haole_Faka to refrigeration [link] [comments]

2024.05.15 17:55 ichuck1984 GE and Toshiba Dehumidifiers

Hi all,
I have 2 dehumidifiers that have crapped out in the past few years. I am just curious if there is anything more I can do to troubleshoot them before finally tossing. Both turn on and move air. I just bought a new one but I figure I have a few weeks to return if I potentially tinker and fix one of these if there is any hope here. Here are the model numbers-
GE ADEL50LYL1
The GE produces water but it can't get the humidity down past about 60% even after hours/days of running. It used to hold the basement at 45% with no problem. I am assuming it is a refrigerant problem. Nothing ices up though, which I would expect with low refrigerant. Maybe it is just low enough to not work right. I can feel the compressor kick on and it will fill the bucket after a few days but the humidity never really drops more than a few percent.
Toshiba TDDP5013ES2
I replaced the run capacitor yesterday and the air coming out gets cool but it still doesn't have a drop of water in the bucket after almost 24 hours of running in a basement with 65% humidity. There's a small dribble of water that runs out whenever I open the screw cap for the hose attachment. I can feel the compressor kick on, so apparently this one had both the capacitor and refrigerant fail after a year. What a piece of garbage. Dead after 1 summer.
Any hope of salvaging either one? These symptoms appear to be pretty common online and the fact that most of the manufacturers only have a 1 year warranty tells me that they probably don't think much of their products either. Other thoughts?

submitted by ichuck1984 to fixit [link] [comments]

2024.05.15 12:29 TeamLow2803 Troubleshooting Common Fridge Problems: Solutions for a Cooler Life

Your refrigerator is the unsung hero of your kitchen, tirelessly working day and night to keep your food fresh and your drinks chilled. However, like any other appliance, it can encounter issues from time to time. From mysterious noises to insufficient cooling, fridge problems can be frustrating. But fear not! With a bit of troubleshooting, many common fridge issues can be resolved easily, saving you time and money. Let's delve into some of these common problems and their solutions.

Faulty Temperature Regulation

Problem: Your fridge is either too cold or not cold enough, leading to food spoilage or freezing.
Solution: Start by checking the temperature settings. Adjust them gradually and wait for a few hours to see if the temperature stabilizes. If the problem persists, it could be due to a faulty thermostat or damaged door seals. Consider replacing the thermostat or sealing any gaps in the door gaskets to maintain consistent temperatures.

Unusual Noises:

Problem: Your fridge is making strange noises like buzzing, rattling, or clicking.
Solution: Noises can indicate various issues such as a malfunctioning compressor, a faulty fan, or loose components. Clean the condenser coils to remove dust and debris, which can cause the compressor to work harder and produce noises. If the noise persists, it might be best to call a technician to diagnose and repair the problem.

Water Leaks:

Problem: You notice water pooling under or around your fridge.
Solution: Check the water supply lines and the defrost drain for any leaks or clogs. Clear any blockages in the drain using a mixture of hot water and mild detergent. Inspect the water inlet valve for signs of damage or corrosion and replace if necessary. Additionally, ensure that the fridge is level to prevent water from pooling.

Frost Build-Up in Freezer:

Problem: Your freezer is accumulating excessive frost, affecting its efficiency.
Solution: Frost build-up can occur due to several reasons, including a faulty defrost timer, defective defrost heater, or damaged door seals. Start by manually defrosting the freezer and then check the defrost components for any issues. Replace any faulty parts and ensure that the door seals are intact to prevent warm air from entering the freezer.

Fridge Not Running:

Problem: Your fridge is not running at all, and the interior remains warm.
Solution: Begin by checking the power supply and ensuring that the fridge is plugged in properly. Inspect the electrical cord for any damage and replace if necessary. If the fridge still doesn't turn on, it could indicate a problem with the compressor, start relay, or overload protector. Contact a professional technician for further diagnosis and repair.

Ice Maker Malfunctions:

Problem: Your ice maker is not producing ice or is producing malformed ice cubes.
Solution: Check the water supply line to ensure it's not kinked or blocked. Clean the ice maker and the ice bin thoroughly to remove any built-up debris or mold. Inspect the water inlet valve and the ice maker assembly for any faults and replace if needed. Additionally, adjust the ice maker settings according to the manufacturer's recommendations for optimal performance.

Conclusion

A malfunctioning fridge can disrupt your daily routine and potentially lead to food spoilage and waste. However, many common fridge problems can be resolved with simple troubleshooting steps. By identifying the issue and implementing the appropriate solution, you can extend the lifespan of your fridge and ensure its efficient operation. Remember, if you encounter any major issues or are unsure about performing repairs, it's always best to seek professional assistance. With a little care and attention, your fridge will continue to serve you well for years to come. Get best fridge repair in Dubai call for more information: +97145864033

submitted by TeamLow2803 to u/TeamLow2803 [link] [comments]

2024.05.15 07:25 wisealive WPW10366605 Refrigerator Adaptive Defrost Control Board Compatible with Whirlpool/Kenmore/Kitchen Aid/Maytag/Amana

WPW10366605 Refrigerator Adaptive Defrost Control Board Compatible with Whirlpool/Kenmore/Kitchen Aid/Maytag/Amana
Product Description:

submitted by wisealive to tiktok_make_me_buy_it [link] [comments]

2024.05.15 06:55 wisealive WPW10366605 Refrigerator Adaptive Defrost Control Board Compatible with Whirlpool/Kenmore/Kitchen Aid/Maytag/Amana

WPW10366605 Refrigerator Adaptive Defrost Control Board Compatible with Whirlpool/Kenmore/Kitchen Aid/Maytag/Amana
Product Description:

submitted by wisealive to u/wisealive [link] [comments]

2024.05.14 09:18 TeamLow2803 Troubleshooting Fridge Water Leak Issues: Causes and Solutions

Has your kitchen turned into a mini swimming pool due to a persistent water leak from your refrigerator? Don't worry; you're not alone. A leaking fridge is a common household nuisance that can lead to water damage, mold growth, and increased energy bills. However, diagnosing and fixing the problem isn't always as straightforward as it seems. Let's explore some common causes of fridge water leaks and how to resolve them.
https://preview.redd.it/qf9d2vd1fc0d1.png?width=900&format=png&auto=webp&s=008236ab2d9e0bcde7bdc458c0a34e78e69822a7
Read More: Fridge Repair Services in Dubai

Clogged or Frozen Defrost Drain: One of the primary reasons for a refrigerator water leak is a clogged or frozen defrost drain. Over time, food particles, dirt, and debris can accumulate in the drain, obstructing the flow of water. Additionally, if the drain freezes, it can cause water to overflow and leak onto the floor. To fix this issue, locate the defrost drain, usually located at the back of the freezer compartment, and clear any blockages using a pipe cleaner or a mixture of hot water and baking soda. You can also try manually defrosting the drain with a hairdryer set to low heat.
Faulty Water Inlet Valve: The water inlet valve controls the flow of water into your refrigerator for features like the ice maker and water dispenser. If the valve becomes defective or develops a leak, it can result in water pooling around the appliance. To determine if the water inlet valve is the culprit, inspect it for signs of damage or corrosion. If necessary, replace the valve with a new one, following the manufacturer's instructions. Remember to shut off the water supply to the fridge before attempting any repairs.
Damaged or Loose Water Line: Refrigerators with built-in water dispensers are connected to the household water supply via a plastic or copper water line. If this line becomes damaged, punctured, or disconnected, it can lead to leaks. Inspect the water line for any visible signs of wear and tear, such as cracks, kinks, or loose connections. Replace any damaged sections of the water line and secure all connections tightly to prevent leaks.
Clogged or Overflowing Ice Maker: If your fridge is equipped with an ice maker, a malfunctioning unit could be the source of the water leak. Sometimes, ice can get stuck in the ice maker's mechanism, causing it to overflow and leak water onto the floor. Check the ice maker for any blockages or jams and clear them away carefully. Additionally, inspect the ice maker's water supply line for any leaks or loose connections.
Improper Leveling or Door Seal Issues: A refrigerator that is not properly leveled can cause water to pool and leak out of the appliance. Use a leveling tool to ensure that your fridge is sitting evenly on the floor. Additionally, worn or damaged door seals can allow warm air to enter the fridge, leading to excess condensation and water leakage. Replace any worn door seals to maintain a proper seal and prevent leaks.
Excessive Frost Buildup: If your refrigerator has excessive frost buildup on the evaporator coils, it can interfere with the unit's ability to defrost properly, resulting in water leaks. Regularly check the evaporator coils for frost buildup and defrost them as needed. You can use a hairdryer or a specialized coil brush to remove the frost manually. Additionally, make sure that the refrigerator's temperature settings are adjusted correctly to prevent frost accumulation.

In conclusion

A leaking refrigerator can be a frustrating problem to deal with, but with some troubleshooting and basic repairs, you can usually resolve the issue without the need for professional assistance. By identifying the underlying cause of the water leak and taking appropriate action, you can prevent further damage to your appliance and avoid costly repairs down the line. Remember to always prioritize safety and consult the manufacturer's guidelines when performing any repairs on your refrigerator. Get best fridge repair in Dubai call our toll free number at: +97145864033

submitted by TeamLow2803 to u/TeamLow2803 [link] [comments]

2024.05.12 20:44 MisterWhale How to upgrade a new fridge for reliability?

I got 3 fridges - an Amana from the late 80's, a Maytag from the mid 2000s, and a 2022 Whirlpool. The Whirlpool started to leak refrigerant, while the other 2 have been rock solid far as I remember for 20 and 40 years. I been reading up on the problem, this seems to be a general industry trend.
Are there any good resources out there on upgrading a new fridge for reliability?
I'm no expert yet on refrigerant loops, but I've been doing my own plumbing, electrical, and auto work for an awful long time so I'm definitely willing to get into a big job.
Please let me know any references for a project like this, be they general or specific. I'd be happy to gut and rebuild the whole thing if that's what it's going to take. I just want a fridge I can stick in the shop that'll run until I die.
Thanks!

submitted by MisterWhale to appliancerepair [link] [comments]

http://swiebodzin.info