Dremel cutting

So I am about to swap catbacks with someone and I’m gonna do the work, but the guy that installed the catback for him welded a piece of metal on it for some reason, what would be the best way to cut this off, I have a dremel tool if I bought some metal cutting bits would it do it?

Timestamp: https://imgur.com/a/gXDrTki
Pictures: https://imgur.com/a/gXDrTki
All prices are shipped. Will not ship any magazines to ban states, some items more used than others, will specify in listing. First dibs take priority. Paypal is preferred.
Agilite K19 3.0 Plate Carrier (Put on a single time) - $200
AK Triangle 36 drum magazine - $150
Texas Weapon Systems Short Top Handguard for AKM rifles (Well used, some dremel work done to help fit, has all bits and pieces) - $200
FAB GL-CORE S Stock (Mil spec, used once. Does not have buffer tube adapters) - $50
B Kings Firearms 14.5" AR15 barrel with FSB. (Cut off delta ring for future free float build, but never happened. Never been fired) - $125
Precision Armament M4-72 Severe Duty Compensator for AR15 (Never used) - $60
Romanian AKM Bolt Carrier and Piston (Well used) - $50
Aero Precision M4E1 Upper with no forward assist (Never used) - $75
3x Magpul PMAG Gen 2 (used) - $10 each
4x Aluminum Stanag (Used, unknown make) - $8 each
US Palm AK30 magazine (Lightly used) - $12
Bulgarian Steel Lug Poly Mag 30 rnd (used) - $10
Bulgarian Steel Lug Poly Mag 40 rnd (used) - $10
Glock 23 .40 S&W 22rnd Mag + RWB 30 rnd mag (lightly used) - $15
Tulster IWB Holster for Glock (used) -$40
Skydas Gear IWB Holster for Ruger 57 (lightly used) - $40
Magpul AFG-2 (used) -$25
Sightmark R-Spec (well used) - $50
CVLife 4x32 scope (Sucks, used) - $20
Plastic railed AKM upper handguard (used) - $5
Armored Republic twin rifle magazine pouch (never used) - $20

Hello all,
I’m a new bather at this local salon in my area. I’ve only been at the salon for a month and have become good at bathing dogs and cutting nails. However, I still have trouble grinding a dog’s nails with a dremel and need some tips. How should a hold a dog’s paw while dremeling their nails? What should the nails look like after the dremel? Any advice would be appreciated because I want to do the best that I can.

Can you use a hose attachment on the dewalt die grinders like most dremel/rotary tools? I haven't bought one yet but can't think why you wouldn't be able to do it. Anyone tried it? I need to cut a welded nut that has really poor access.

I purchased a set of Mick Thomson 7 string EMTYs because I love how the 6 string versions sound in drop A and B, and that’s the tone I was aiming for on my 7 string.
I had to do a bit of dremelling to get the pickups to fit the cavity, but it wasn’t anything I wasn’t confident with. I got them mounted and soldered together using the provided directions from SD.
Holy mother of bass, Batman! I’m having to completely cut out all of the bass frequencies just to get it to sound remotely clear. I’ve seen African drinking water that was clearer than this. It is the sonic representation of a bowl of marmalade jelly that’s bouncing around. I’ve tried adjusting the heights of the pickups, but that doesn’t do anything to change the tone.
I know that 7 string models of 6 string pickups aren’t going to be exact tonal copies, but is this just how these sound? If not, what else can I do to troubleshoot these? I’m not above cutting my losses and going with another brand, but I’d like to make sure I cover all my bases before I do that.

I recently purchased a piece of honeycomb ruby. I know it's man-made but the color is stunning! Is it possible to cut and polish in the traditional way? I use a dremel.

She was struggling to have enough room in front of her screen with the giant legs of the Odyssey G9.
This was a fun project, and still cheaper than the crappy particle board desks you can go out and buy at a store. All the stencils I used came from Amazon, and I cut the designs with a Dremel 3000. Just wanted to make her something custom in wife aesthetic. Her previous desk was a glass top/particle board L-shaped disaster from Office Depot that i think we paid over $400 for. The 30" depth on this butcher block desk makes the giant legs of the super ultrawide much more tolerable.
Ebony Butcher Block came from Lowes. ($189)
Legs came from Amazon ($119)
Various stencils from Amazon ~$5 each. I already owned the Dremel. 2 cans of this stuff.
Empty desktop photo, Desk setup photo, Wife enjoying BG3 on new desk

This was a fun project, and still cheaper than the crappy particle board desks you can go out and buy at a store. All the stencils I used came from Amazon, and I cut the designs with a Dremel 3000. Just wanted to make her something custom in wife aesthetic. Her previous desk was a glass top/particle board L-shaped disaster from Office Depot that i think we paid over $400 for. The 30" depth on this butcher block desk makes the giant legs of the super ultrawide much more tolerable.
Ebony Butcher Block came from Lowes. ($189)
Legs came from Amazon ($119)
Various stencils from Amazon ~$5 each. I already owned the Dremel. 2 cans of this stuff.
Empty desktop photo, Desk setup photo, Wife enjoying BG3 on new desk

Hello WindowTint.
I'm trying to finalize my daft punk helmet and need to tint the visor. Please see attached photos: https://photos.app.goo.gl/vmidgRdvrvSkxzcB9
It's a piece of plastic sheet that I curved using vacuum forming (heat up in the oven to 180+ degC and then put it on the form standing on a box connected to a vacuum cleaner to suck it to shape). Inside has some irregularities, but outside is pretty smooth. How would you advise to approach tinting it?
I know edges look like shit - I still need to cut it to size, but it's weekend and didn't want to disturb my neighbors with the sound of dremel grinding on plastic.
https://imgur.com/a/jDi6ME9
This is my goal.

Hi All,
I'm a plumber kitted out with Makita and looking for a Dremel tool for detail work, mainly for detail work when cutting tiles (so will need small tile cutting discs) and cutting plastic pipe.
To stay with Makita ive been offered the Cordless Die Grinder, but from reading the specs of it, I can see loads of "grinding" and "sanding" accessories, but not so much "cutting"
Am I trying to make this tool something it isn't, and should I just get an actual Dremel??
Any experience with this and advice would be great before I splash out on a tool!

hey there so basically i was like damn the quest 3 overheats a lot i wonder if theres custom face plates on thingiverse to give better cooling potential, there sadly is not. then i had another idea, if i get a dremel or some sort of tool to cut the plastic i could cut the area of the face plate right in front of the heatsink since its very conveniently aimed at a spot that has no electronics.
is there any possible downside of this? i plan to install a dust vent to it to keep it clean still but im unsure if this could possibly lead to any problems has anyone tried anything similar?

TimeStamp: https://imgur.com/a/ZVlohYc
Holsters And Modules-
Sig P320 X-Carry Size Medium Module With Sig Weight- In great shape. Has mag release. No safety cut. $60
Sig X-Macro Module- In great shape. Has manual safety cut, mag release and additional backstraps. $75 SOLD
Wilson X-Macro Short Module- In great shape. Manual safety cut was dremeled. Has mag release. $65
Gray Guns P365 Module Black- In great condition. Has mag release. No manual safety cut. $65
Gray Guns P320 X-Carry Black- In great shape. Has mag release. $100
Sig P365XL Module Black- In great shape. No manual safety cut. Has mag release. $30 SOLD
Lights and Optics-
Holosun EPS Green 6 MOA- Never Mounted. In Great condition. This is NOT an EPS Carry. Comes with a set of screws and the Holosun tool. No box. $270
Holosun 508T X2 Green- In great shape. Just the optic. Does not come with anything else. $260 SOLD
Streamlight TLR-7X- In very good condition with low salt. Has additional keys and box. $115 SOLD
Mags-
(5) P320 Compact 15 Rounders- In great shape. Made in Italy. $135 for all 5
(1) P320 Compact 10 Rounder- In great shape. Made in Italy. $28
(2) P365XL 12 Rounders- In good condition with some salt. $63 for both SOLD
Glock 19 10 Round Mag- In great shape. State compliant. Mag catch just on right side. OEM. $18 SOLD
Mec-Gar Beretta M9 20 Round Mag- In very good condition, low salt. 18 rounder with Mec-Gar +2 extension. 9mm. $30SOLD
(2) CZ P-10C 17 Round Mags- In very good condition with low salt. $60 for both. SOLD
(2) Glock 19 Mags 15 Rounders- In great shape. $40 for both.
FN 509 Midsize 15 Rounder- In great shape. $25
DDM Scar 17 Magazine FDE- New, 20 rounder. $13
Misc
Daniel Defense Vertical Grip- In very good shape. For picatinny. $25 SOLD
Wilson P365/ P320 Tungsten Grip Weights- In great shape. $15 SOLD
All prices are shipped CONUS. I will be using Paypal F&F or Venmo. Open to offers and bundles. No shipping restricted items to ban states.

The title is a lie - this is absolutely a seat thread.
I'm unreasonably excited for my new GT (upgrading the old GT), my wife laughs at me because it's almost the same car and nobody casual will be able to tell the difference.
The thing I'm LEAST excited about is the seats. At 2 years in (and a lot of miles), the current Recaros bruise my outer thighs on anything but the shortest drives. The passenger seat is much comfier than the driver, probably due to less wear. For the first year and a half the seats were fine, so I suspect that I just hadn't worn in the bolsters enough to feel the metal rods. Also I've been losing weight, when I got the car I was probably a few pounds lighter than I am now, but I got much heavier and didn't have a problem. I've been exercising a lot more lately, too.
So I'm pre-emptively floating ideas to fix the seat situation before the new ones wear in.
Option 1: Swap with a limited owner (or get a limited driver's seat from a wreck or off of eBay). This is a decent option, assuming I like the limited seats. I have an appointment to go drive one (literally to assess the seats), so we'll see. If the problem truly is just seating position/lumbaetc., having the 10-way adjustable seat might go a long way. Downside: might have the same problem - they also have uncomfortable metal bars!
Option 2: Just bend, cut out, or carefully remove the bars. I'm assuming that the Recaros aren't magic, and that they disassemble just like the limited seats. I can either do a total tear-down and unbolt the bars, or just cut them with a dremel, but either way an hour's labor ought to get them gone. Downside: might need to figure out something to stuff the gaps in the bolsters with, some people report that after removing the bars there's something else hard underneath.
Option 3: Get professional help. This one came to me from a friendly subreddit member in a DM, but basically I could go to a local automotive upholstery shop and explain the problem... and let them fix it. They'd be on the hook to make it look perfect, and could probably do what I'd do in Option 2 with more skill. Maybe even widen the bolster a little in the process to accommodate fat American asses. Downside: they may go "nah, can't help you".
Option 4: Get aftermarket seats. A mount plate and 4 bolts pretty much lets us put any universal seat in. Genuine Recaros, while pricey, will harness right up (although they'd need a resistor to block out the SRS light). Or just skip the power options and get literally any brand. Downside: no heat. Power is a question mark. No SRS sensors.
Option 5: Try to make the seats from a VA STI (which are insanely comfortable) fit. I don't know if anyone has done this yet, but I bet the same mount plate would do the trick, and the wiring ought to be significantly easier (might have to splice, but all the same plugs should be there). These seats are pretty plentiful on the secondhand market. Downside: sweat equity, unknown hardware requirements.
Edit: Option 6… cancel my order and get a Limited. I’m sure the sales manager will be cranky with me, but it’s an option on the table. Sure I lose all the drive modes and stuff, but I can customize a limited just fine. And it comes with better seats. I do need to go drive one first, though. I’m still struggling to resist the urge to buy a 6mt. My knee and hip are not great on the left side, which (along with my wife having bad knees) is why I got the GT in the first place. But… it’s a thought.
Edit: Option 7… sit on a purple seat cushion. Lol.
I welcome any an all input, with the exception of GT hate. Haters who say "why are you getting a GT" or "why are you getting another GT" or any permutation of the above will be ignored.