It's common for non-Ashlands biomes that were connected to the border of the Ashlands biome to have vastly different elevations in the new update, resulting in rocks, ancient roots, trees, etc. floating in the sky above the land or sea.
The simple solution is to make a fresh new world after the new Ashlands patch. And if you never visited the Ashlands in your old world, you're also likely safe.
But if you ever traveled close to the Ashlands, you'll get this glitch. You can prevent this with the Upgrade World Mod. But it's quite the process.

Part 1: Make a world backup

The game automatically makes backup files, but just to be safe, you want to manually create your own backups.
Your Valheim world consists of 2 files with these extentions:

• *****.db
• *****.fwl

In fact, I suggest you include the backups of your backup, too:

• *****.db.old
• *****.fwl.old

Actually, it's not a bad idea to make a backup copy of the entire save folder, just in case.
Now, it's best to be working with Local Saves rather than with Cloud Saves. By default, the game uses cloud saves. Your save file location might be different depending on which save method you had employed.
This is the Valheim local save file location:

• C:\Users\*****\AppData\LocalLow\IronGate\Valheim\worlds_local

The AppData folder is normally hidden. So here's another way to find the AppData folder:

1. Windows Key + R
2. type in appdata.
3. Navigate Appdata > LocalLow > Irongate > Valheim

Part 2: Staying Pre-Ashlands

In order to prevent elevation errors, you must perform these fixes before loading up the world with the Ashlands Patch downloaded. To do this, Go to your Steam Library and set your game to the previous patch:

1. Steam Library > right-click Valheim > Properties > Betas
2. change "Beta Participation" from "None" to "default_preal"

Part 3: Console setup

Noe you need to enable the developer console

1. Steam Library > right-click Valheim > Properties > General
2. Find the Text field in the Launch Options section under where it says "Advanced users may choose to enter modifications to their launch options"
3. In this text field, type -console

You can now open the Developer Console by pressing F5 while in the game world.

Part 4: Mod Installation

You need to install the BepInEx Pack. Followed by the Upgrade World Mod.
I recommend either installing these mods manually or using the r2modman manager (Source)
(DO NOT use the Overwolf / Thunderstore mod manager - it has video ads that ruin performance)

• r2modman video guide
  
• Upgrade World documentation
  

Part 5: Finally doing something

Now we're finally ready to get started.
Be sure to make a new character for this test and do not use your actual character. Then, Load up your Valheim world.
Open the console with F5 and make sure you have the following developer commands active:

• devcommands
• god
• fly

This just makes things easier for later on.
Now we want to reset the Ashlands. The command for this is:

• zones_reset biomes=AshLands force

The "force" part of that command forces any player bases in the biome to be destroyed without a trace.

Part 6: Fixing Problem Spots

This is where trial and error begins. You'll have to travel back and forth between the Ashlands update and the previous patch

1. Save another backup of your world file.
2. Change your Beta selection back to "None"
3. Load up the game and fly around in god mode, checking to see if everything is fine
4. Write down the coordinates of any problem areas that you find.
5. Restore your backup world file
6. Reset the problem spot (see below)
7. Repeat Steps 1-6 until done.

For Step 6, you'll need to use more targeted resets, limited by max distance. There are 2 ways to do this: by raw position (in meters) or by zone. (a zone is a 64x64 chunk of the map)

• zones_reset pos= max=
• zones_reset zone= max=

pos sets a center position and max sets how far out it goes.
zone sets a center position and changes max to set how many zones away the reset can reach.
Example:

• zones_reset pos=-3700,-7200 max=350

This resets a small area on my map that was giving me problems.

• zones_reset zone=-58,-113 max=6

This more or less does the same thing, but goes by zones. Notice that the max needs to be smaller since zones are a 64x64m area.

Side Note: The Reset Area shape

It is unclear to me whether this "max" distance is actually a "radius" for a circle. I think it might just create a square around the center point. So, for example:

• zones_reset pos=0,0 max=100

If it was a square, this would make a 200x200m square with these corner locations:

-100, 100	100, 100
-100,-100	100,-100

A circle dictated by a radius wouldn't include those.
I have no idea if it is a square or if it is a circle. All I know is that I've had unpredictable and strange results when using a very large radius.

I dont know what is the problem here , and the error is displayed in both Flutter and golang. However, the same url works perfectly in POSTMAN app so I am assuming there is something wrong in flutter code.

import 'package:fluttematerial.dart'; import 'package:web_socket_channel/web_socket_channel.dart'; import 'package:web_socket_channel/io.dart'; // Import this for Flutter Desktop or Flutter Web final channel = WebSocketChannel.connect(Uri.parse('ws://localhost:8000/ws')); void main() { runApp(const MyApp()); } class MyApp extends StatelessWidget { const MyApp({Key? key}) : super(key: key); @override Widget build(BuildContext context) { return MaterialApp( home: Scaffold( appBar: AppBar( title: const Text("WebSocket Example"), ), body: Center( child: StreamBuilder( stream: channel.stream, builder: (context, snapshot) { if (snapshot.connectionState == ConnectionState.waiting) { return const CircularProgressIndicator(); } else if (snapshot.hasError) { return Text('Error: ${snapshot.error}'); } else { final data = snapshot.data; return Text(data != null ? data.toString() : 'No data'); } }, ), ), ), ); } } //error : Performing hot restart... 406ms Restarted application in 408ms. Error: WebSocketChannelException: Instance of 'WebSocketException' dart-sdk/lib/_internal/js_dev_runtime/private/ddc_runtime/errors.dart 330:10 createErrorWithStack dart-sdk/lib/_internal/js_dev_runtime/patch/core_patch.dart 337:28 _throw dart-sdk/lib/core/errors.dart 120:5 throwWithStackTrace dart-sdk/lib/async/zone.dart 1386:11 callback dart-sdk/lib/async/schedule_microtask.dart 40:11 _microtaskLoop dart-sdk/lib/async/schedule_microtask.dart 49:5 _startMicrotaskLoop dart-sdk/lib/_internal/js_dev_runtime/patch/async_patch.dart 181:7  

Golang code :

package main import ( "fmt" "net/http" "github.com/go-chi/chi/v5" "nhooyr.io/websocket" ); func ws_connection(w http.ResponseWriter,r *http.Request){ con,err:=websocket.Accept(w,r,nil); if err!=nil{ fmt.Print("connection can't be etablished. orry:!") } //defer con.Close(websocket.StatusGoingAway,"sayo nara"); fmt.Print("connection channel is etablished\n\n"); str :="hello"; err=con.Write(r.Context(),websocket.MessageText,[]byte(str)); if err!=nil{ fmt.Print("the messsage can't be written"); } str=str+"a"; } func main(){ ws_mux:=chi.NewRouter(); ws_mux.Get("/ws",ws_connection); http.ListenAndServe(":8000",ws_mux); } 

Hey everyone,
I’ve been diving deep into the world of brainwallets and wanted to share my thoughts and experiences with using them. For those unfamiliar, a brainwallet is a method of storing cryptocurrency keys in your memory by generating them from a passphrase. It’s a fascinating approach with some unique benefits.
I actually developed a tool called easySeed to simplify the process of creating and managing a brainwallet. It’s an open-source project that I designed to be straightforward and easy to use.
One of the main advantages of using a brainwallet is that you no longer need to store your 12 or 24-word seed phrase in a secure location. What better place than your own mind, which is always with you?
Here are a few reasons why I believe brainwallets can be a great option:

1. Portability: Since your wallet exists in your mind, you don’t need to carry any physical devices or documents. This makes it highly portable and convenient.
2. Security: Without any physical traces, there’s less risk of theft or loss due to hardware failure. As long as you keep your passphrase secure and private, your assets remain safe.
3. Privacy: Brainwallets offer a high level of privacy, as there’s no digital footprint that can be easily tracked.

You can create a memorable passphrase based on a personal phrase that only you would know, combining it with details that are not obvious. For example:

 Take a meaningful phrase: "My dog Bruno was born in 2010" Modify it to add complexity: "MyDogBrunoBrunoBornIn2010!" You can derivate other wallets from the same passPhrase by using the same passPhrase with a suffix. For example: PassPhrase: "MyDogBrunoBrunoBornIn2010!" Wallet 1: "MyDogBrunoBrunoBornIn2010!-wallet1" Wallet 2: "MyDogBrunoBrunoBornIn2010!-wallet2" ... 

It’s also important to regularly practice recalling your passphrase to ensure you don’t forget it.
Has anyone else here experimented with brainwallets? I’d love to hear your experiences and any additional tips you might have.
Cheers!

Just caught a PoGo Diancie would anyone be willing to do a quick touch trade in Home so I can move it to another game?

Ok so im trying to move onto AM5 and all the beauty that comes with so this is going to be a budget 4k or 2k gaming build. (possible new monitor 27 mini-led 4k 160hz HDR1000) if not (current monitor 27 inch mini-led 1440p @ 165hz HDR1000)
Current Build:
UserBenchmarks: Game 155%, Desk 95%, Work 157%
CPU: AMD Ryzen 7 5800X - 90.8%
GPU: AMD RX 6800-XT - 172.5%
SSD: Neo Forza NFS011SA351-6007000 512GB - 71.9%
SSD: Microsoft Storage Space Device 1TB - 371.6%
RAM: Kingston KF3600C18D4/16GX 2x16GB - 95.1%
MBD: Ibuypower AMD
FPS-
MW2 SEMI-HIGH @ 1440p ~145fps
MW3 Extreme @ 1440p 200+FPS
UserBenchmark Test Comments:
Overall this PC is performing as expected (52nd percentile). This means that out of 100 PCs with exactly the same components, 48 performed better. The overall PC percentile is the average of each of its individual components. single core With an outstanding score, this CPU is the cat's whiskers: It demolishes everyday tasks such as web browsing, office apps and audio/video playback. Additionally this processor can handle typical workstation, and even moderate server workloads. Finally, with a gaming score of 90.8%, this CPU's suitability for 3D gaming is excellent. GRAPHICS: 6800XT games 172% is a record breaking 3D score, it's almost off the scale. This GPU can handle all 3D at very high resolutions and ultra detail levels. Boot Drive71.9% is a good SSD score. This drive enables fast boots, responsive applications and ensures minimum system IO wait times. RAM: 3600mhz 2x16GB32GB is enough RAM to run any version of Windows and it's far more than any current game requires. 32GB will also allow for large file and system caches, virtual machine hosting, software development, video editing and batch multimedia processing.
NEW BUILD (not definite choices just about what im thinking.
CPU AMD Ryzen 7 7700X 4.5 GHz 8-Core Processor
GPU Asus TUF GAMING OC GeForce RTX 4070 Ti SUPER 16 GB Video Card
SSD: Neo Forza NFS011SA351-6007000 512GB
SSD: Microsoft Storage Space Device 1TB
SSD: Western Digital Black SN750 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive
RAM: G.Skill Trident Z5 RGB 32 GB (2 x 16 GB) DDR5-7200 CL34 Memory
MBD: ASRock B650M Pro RS WiFi Micro ATX AM5 Motherboard
PS: SeaSonic FOCUS 850 W 80+ Gold Certified Semi-modular ATX Power Supply
NOW
Worth the upgrade and transition to 4K gaming? or keep waiting? If i stay at 1440P i dont see the need to upgrade the whole pc as the 6800XT is a monster in that category but im trying to take the leap into 4k mini-led 120hz+ gaming eventually. Monitors keep dropping in price and from what i saw today GPU's a tad bit also. Thinking of saying goodbye to my AMD friends in the GPU department if i go 4K to help with those 4k shadows and reflections and ray tracing if not i can maybe swap my 6800xt for a 7900xtx with a 240hz 1440p monitor and dominate 1440p gaming and call it a day and that way id only have to buy 1 monitor and 1 GPU and sell the used ones rather than the PC as a whole or piece by piece of a whole PC..
Thoughts, Comments? Suggestions? Substitutions?

I currently have a rtx 4070 wich I bought in Novembedecember, and it's a good card, but for some games the VRAM is filled to the brim. When I play cod, the VRAM sits at ~11500 mb, and when playing other games, the VRAM sits above 10 gb too. I think I can sell my card for ~€500, and I found an RX 7900 xt for around €720. I also found a 4070 ti super for ~€760. Both those cards have 16 gb vram and are a little faster, but the 4070 ti super also has dlss(frame generation) features and Ray tracing.

On the post about Trace and Lydia I posted a pic of a rebel flag belt buckle and said "I zoomed in for you" as a joke. The mods deleted it for misinformation. You can't even clown on insurrectionists on that sub anymore. They're literally sticking up for racists.

As many of you may have read, there is a case of two missing adopted kids in North Carolina, where remains have been found. The news has reported that their adoptive “mother” is Avantae Deven.
I’m a curious person and started digging up information on Avantae Deven when I first read the story in my news feed and could not believe what I was reading. It seemed like whomever this woman is must have be using an alias; Avantae Deven is not a name like Kim Jones or Mackenzie Smith.
The more I dug, the weirder it seemed to get. I found a property deed to a place in Sedona, Arizona, and figured out that whomever this Avantae person is, she at one point in time had owned a home together with someone named Nicole Adams. So I dug into who Nicole Adams was, and learned that she was the widow of a spiritual leader named Robert Adams. It appeared to me that there would be no way to identify who Avantae really was, unless I could also identify the true identity of Robert Adams.
*******
I've done investigative work for many years, including skip tracing. I can conclusively state that there was absolutely no person actually named Robert Adams born in New York State on January 21, 1928. This is demonstrated by the New York Birth Index. I have combed the census records for 1930, 1940, and 1950, and cross-checked them against multiple databases, and am confident that nobody with the birth name of Robert Adams was born anywhere in the United States on January 21, 1928.
Moreover, there was absolutely no person with the true name of Robert Adams who died anywhere at all in the United States, let alone Sedona, Arizona, on March 2, 1997. This is demonstrated by the Social Security Death Index.
I began this research largely by performing exhaustive searches on the known addresses that are associated with Robert, his wife Leonie (who used to use the alias Nicole), and Avantae Deven (who turns out to be their daughter Michelle who began using the alias Avantae in the mid-1990’s or so). Most of the addresses are PO boxes. Those that are PO boxes are all *private* PO boxes, not PO boxes that one can rent from the United States Postal Service. To me, that spoke volumes. The family were clearly using aliases.
As I explain further below, I eventually determined that “Robert Adams” was Robert Spiegel, born 21 January 1932 in New York. “Nicole Adams” was actually Aileen Beverly Leonie Maxwell, born February 2, 1929, in Jamaica. “Avantae Deven” is actually their daughter, Michelle K. Spiegel, born on October 1, 1960, in California.
One of Robert’s many false stories about Robert’s life that my research has refuted is Robert’s claim that his mother was Jewish and his father was Catholic. That was a lie. Both of his parents were Jewish. It’s also interesting that he claimed that he was “raised Catholic.” There is absolutely nothing to suggest that. His mother always, in New York, lived in Jewish neighborhoods. Moreover, as will be discussed below, his parents had a Jewish wedding. It’s also downright absurd that he would tell people that he was “half Jewish.” If your mother’s Jewish, you are Jewish, pure and simple. Even if Robert’s father had truly been Catholic (which he wasn’t; his name was Samuel Spiegel and he immigrated to America in 1907, lived with his Jewish, Yiddish-speaking cousins, and spoke Yiddish himself), Robert would have been Jewish because the status of being a Jew comes from the mother. Robert’s mother’s name was Fannie (nee Fleisfeder) Spiegel. Fannie’s parents were Itzik Fleisfeder and Esther Libke (nee Rifkin) Fleisfeder. Esther’s parents were Mendel Rifkin and Sarah whose maiden name is lost to time and the disappearance of the shtetls. Robert’s claim to having had a Catholic father was utterly false, but is part and parcel of his ongoing compulsive daily lying about anything and everything.
Here is the story.
*******
Kolomyia, formerly known as Kolomea, is a city currently located in the Western Ukraine.
On January 21, 1892 (the same year that Kolomea tallis¹ workers went on strike for better pay and working conditions), Kolomea resident Rachel Katz, wife of Abraham Spiegel, gave birth to a son, who was given the name Schmuel.
On the date that Schmuel Spiegel entered the world, Kolomea was ruled by the Austro-Hungarian Monarchy, and almost half of the city’s residents were Jewish.
In June of 1907, fifteen-year-old Schmuel² boarded the Zeeland, which sailed from Antwerp, Belgium, arriving at New York Harbor on June 18, 1907. The ship’s manifest states that Schmuel’s father had paid for his transport, and that Schmuel intended to reside with his father, Abe, in Brooklyn. Schmuel was granted entrance, and took up residence with his cousin Charles Fetner, who resided at 353 Myrtle Avenue, Brooklyn, in Apartment A with his wife Jennie and their baby daughter Ettie. The sparse record that exists suggests that although Schmuel’s father was, indeed, named Abraham, Abraham lived and died in Europe, without immigrating to America.
The 1910 census describes Samuel’s cousin Charles as a carpenter, who had been married to housewife Jennie for six years, and a father of three children-- Ettie age four, Nathan age two, and baby Jacob, who was not even a year old. Eighteen-year-old Samuel was identified by profession as a “Foreman Sailmaker” in an industry described as “pocket-books.”
Three and a half years after being granted admission, on a bitterly cold winter day, January 4, 1911, Schmuel (now employed as a pocket-book maker, and having Anglicized his name to Samuel) signed and submitted his declaration to become a United States citizen. He stated, in that declaration, that he was born on January 21, 1892.
By 1915, Samuel had left his cousin’s abode and was residing as a lodger in the home of a widow named Rose Hammer, who lived with her two adolescent sons, Meyer and Louis, at 531 E. 5^th Avenue; Samuel was now working as a “driver.”
Two years after the 1915 state census was taken, Samuel had moved back to Myrtle Avenue, but this time at building no. 849. On June 15, 2017, Samuel registered for the draft, and described himself as being a pocketbook maker, working for “A. Shoenfeld,” at 101 Crosby Street, New York. He was single. He stated, in his draft registration, that he was born on January 21, 1892.
*******
A woman named Fruma Fleisfeder was born in Beltz, Bessarabia, sometime between July 1, 1893, and 1901, to Itzik Fleisfeder and Esther Lieba Rifkin. Fruma (not living up to her pious given name) provided different dates and years of birth to different authorities on different occasions, making it impossible at this point in time to know her true position in the birth order of her family. Regardless, Fruma, who began using the name Fanny upon her entrance to the United States, did have three brothers and a sister who also came to America-- Louis Fleisfeder who was born April 10, 1890, Max Irving Fleisfeder who used October 10, 1892 as his birthdate, Hersch (later known as Harry), whose official birthdate was December 15, 1901, and Sylvia who was born in approximately 1906.
On December 1, 1919, Fruma arrived in New York Harbor on the ship La Touraine, declaring her intention, at entry, to become a United States Citizen. The ship’s manifest describes her as five feet five inches tall, with fair hair, blue eyes, and a fair complexion. The ship’s manifest states that she was, at that time, age 24. If that were correct, she would have been born in 1895.
Fruma (then going by Fanny) took up residence with her cousin Ethel (nee Ruchlin) and Ethel’s husband Samuel Steinberg, on 15^th Street, Brooklyn. Soon thereafter, Ethel gave birth to her first child, a daughter named Theresa. The 1920 census states that Fanny was Russian, didn’t speak English but, rather, spoke Hebrew, and worked as a milliner in a millinery store. The 1920 census also states that Fanny was age 25, which lines up with her being age 24 in the prior year’s ship manifest.
*******
Sam and Fanny married in Manhattan on January 24, 1925. Their marriage certificate (signed by each of them) identifies Sam as being age 32 (contradicting, by one year, his immigration records which would have placed him at age 33), and identifies Fanny as age 24, the same age that she had claimed to be six years prior, and also contradicting an immigration petition that she would file two decades in the future, which generally placed her birth year at the mid-point of 1893.
If Fanny’s immigration records (which included a petition with her signature on it) were correct, Fanny would also have been age 32 as of her marriage to Samuel, not age 24.
So did Fanny lie in her marriage certificate? Or did she lie in her immigration petition?
The marriage certificate identifies Sam as having been born in Kolomea, Austria, and his father being Abraham, and his mother being Rachel Katz. It identifies Fanny as having been born in Beltz, Russia, to a father named Isaac, and to a mother named Esther Rifkin.
The marriage certificate does not identify Fanny as having any profession, but identifies Sam as being a pocketbook maker.
Sam and Fannie were married at 125 E. 4^th Street, Manhattan, a six-story apartment building with retail units on the ground floor that is now an expensive co-op, with three-bedroom units selling for over $900,000. Present-day real estate advertisements alternatively state that the building was built in 1894, 1903, and 1905.
The first name of the rabbi who officiated was Harry. His surname starts with Reid, but the remaining letters of his signature are illegible. Rabbi Harry identified his residence as 232 Broome Street, which, at the time, was a four-story mixed use building that, among other things, housed Chevrah Ahavath Zedek Anshei Jaskinover.
Witnesses to the marriage were Mayer Budmon and Samuel Steinberg.
*******
Sam and Fanny’s existence was documented next in the 1925 New York State census by census. They were living at 205 S. 2^nd Street. Samuel was still working as a “pocketbook maker.” Fanny was identified as a “housewife.”
Fanny was identified as age 25. This was in accordance with her age as stated on her marriage certificate, but not in accordance with her immigration documents or the 1920 census.
Sam was identified as being age 28, which conflicted with all prior records.
*******
In 1930, the couple were again enumerated, this time in the Federal census. The enumerator, whose signature appears to be “Max Krahn” (or something like that) stated that he obtained the information on April 16, 1930.
Sam was identified as a “framer” of pocketbooks. He was identified as being 36 years of age, which conflicts by two years with the age that he provided to immigration authorities. Perhaps the enumerator was simply sloppy; Samuel was also incorrectly identified in the 1930 census as having been born in “Poland,” with parents who were both also born in “Poland,” notwithstanding other governmental records having identified him as being Austrian. The language he spoke? “Jewish,” according to the enumerator. Was that to mean Hebrew? Yiddish? Both?
Fannie was identified as age 30 (directly in conflict with the information she supplied in her immigration petition, which bears her signature) and as being “Russian,” with parents born in “Russia.” The 1930 census enumerator incorrectly wrote that her year of immigration was 1921. Fannie, too, was identified by the enumerator as speaking the “Jewish” language.
Although later records reflected that Sam and Fannie had a son named Irving who was born in 1926, Irving was not recorded in the 1930 census. Was he missed by the enumerator? Or was he a later-adopted son?
The couple also had a boarder, identified by the 1930 enumerator as one Esther “Larson,” age 40, born in Russia, and similarly a speaker of the “Jewish” language.
*******
The New York Birth Index identifies a baby boy, Robert Spiegel, as one of many babies having been born in the city on January 21, 1932.
*******
On May 21, 1936, Samuel committed suicide by hanging in the family residence, a tenement apartment located at 1168 Union Avenue, in the Bronx. Although, based upon the date of birth that Samuel used for official governmental purposes he was age 44, the death certificate stated that he was age 43.
Fannie engaged the Gordon Funeral Home to prepare him for burial.
Strangely, although Samuel’s headstone accurately identified him in Hebrew as Schmuel Spiegel, son of Avraham, it inexplicably incorrectly stated that he died at age 40.
Fannie of course knew her husband’s real age; both of them signed the marriage certificate that had Samuel’s correct age listed. Furthermore, Samuel had petitioned for citizenship in 1911, and stated that his date of birth was January 18, 1892.
Why would Fannie commission a headstone with a false age? Perhaps she, like her son, was a compulsive liar. Maybe that’s where Robert got it from.
*******
The 1940 census has Fannie (identified as age 38), Robert (identified as age 8), and Fannie’s son/Robert’s brother, Irving Spiegel, age 13, as living with Fannie’s 72-year-old mother, Esther Fleisfeder, at 1537 Fulton Avenue, in the Bronx. Fannie and Esther were identified as widows. Esther was identified as “U” (unable to work), while Fannie was identified as engaged in housework. No source of income for the family was identified.
No explanation is obvious regarding where Irving was living in the census taken a decade previously. Was he adopted?
There is no “Irving Spiegel” listed in the New York Birth Index for either 1926 or 1927. There is an “Irving Spiegal” listed, who was born April 29, 1926. But he is not Irving Spiegel.
I initially thought that perhaps Irving might be one of the unnamed Baby Boy Spiegels born in New York in 1926 or 1927, and that he left the hospital unnamed because his parents were waiting for his bris before naming him. However, Robert left the hospital with the name Robert. Why wait until the bris to name one child, but not the other?
*******
Slightly less than two years after she was enumerated in the 1940 census, Fannie’s mother Esther died, at home, at 1537 Fulton Avenue. The causes of death were “Coronary Thrombosis, Pulmonary Oedema Nephritis, Hypertension, Arteriosclerosis.” Esther left this world on February 6, 1942, the same day that the W. L. Steed was torpedoed, shelled and sunk less than a hundred nautical miles east of the mouth of Delaware River by a German submarine.
She was buried at Mount Moriah Cemetery in Fairview, New Jersey, the same cemetery where her son-in-law Samuel was interred.
*******
On November 12, 1943, Fannie, now residing at 1985 Bathgate Avenue, in the Bronx, petitioned for citizenship. She claimed, in that document bearing her signature, to be fifty years of age, meaning that if she was telling the truth, she would have been born in approximately 1893.
*******
On January 19, 1948, Robert (having assumed a false date of birth, that being January 18, 1931), enlisted in the New York National Guard. On paper, he had turned age 17 the day before his enlistment. In reality, he would be turning age 16 two days after his enlistment.
On December 9, 1949, Robert was discharged from the national guard, apparently for having been AWOL.
The discharge document identifies his address as being 1985 Bathgate Avenue, New York City.
*******
The 1950 census places Robert again at 1985 Bathgate Avenue, New York City. It correctly identifies him as age 18, and states that he worked as a shipping clerk for a newspaper company.
According to the 1950 census, Robert resided at the Bathgate Avenue address with his mother Fannie, who was purportedly still age 50 (seven years after she had previously claimed to immigration authorities to be age 50), and Robert’s brother Irving, age 24.
Irving was listed as unemployed and moreover, according to the census record, had not worked for the prior year. Fannie was employed full-time as a milliner in a hat factory.
*******
Military records reflect that Irving J. Spiegel, born in 1926 and a resident of 1985 Bathgate Avenue, who had completed two years of high school education, had flown bomber planes over Germany during the war. In his military documents, Irving described himself as single, with two dependents.
*******
On February 2, 1929, a baby girl given the name Aileen Beverly Leone Maxwell was born in Lucea, Hanover, Jamaica, to William Maxwell and Daisy (nee Tibbits) Maxwell. Her birth was registered by her parents.
*******
In 1954, Robert Spiegel and Aileen Maxwell were married in New York City. Their marriage license was given License No. 10284.
*******
The following year, the Kingston, Jamaica, Gleaner reported on June 6, 1955:
Miss Leonie Maxwell, daughter of Mr. and Mrs. W. J. Maxwell, was married recently in New York City to Mr. Robert Spiegel of the U.S.A. Both the bride and groom are students at the New York Institute of Dietetics. The bride left the island nearly two years ago for New York. Her wedding gown was chantilly lace and nylon tulle. The bodice was fashioned with a wide, scalloped neckline and elbow-length sleeves. Her three tier skirt of chantilly lace was over pleated nylon tulle. Her fingertip-length veil was adorned with pearls.
*******
If the claim regarding the couple studying at the New York Institute of Dietetics was even true, their studies at this institution didn’t last long. In May of 1956, a number of advertisements bearing Robert’s photograph appeared in the Kingston, Jamaica Gleaner. The advertisements described Robert as a psychologist, author, lecturer, and “practitioner in auto suggestion,” and identified him as “Dr. J. Robert Spiegel.” Readers were invited to come meet Robert on May 21, 1956, at Record Plaza, where he would be autographing his “latest” “world-wide” 33 and 1/3 RPM record, “How to Stop Smoking in 7 days by Auto-Suggestion.”
*******
On May 1, 1959, three residents of 1985 Bathgate Avenue, Bronx, New York, came through customs, having returned from a trip to Jamaica. They identified themselves as “Robert D. Spiegel” born in New York (in addition to giving himself a false middle initial, Robert neglected to complete the I-94-A fully, specifically by leaving his birthdate blank), “Leonie A. Spiegel” born in Jamaica on February 2, 1929, and their minor daughter, and “Sharon S. Spiegel,” born in New York. Someone also neglected to fully complete Sharon’s I-94-A, specifically by leaving her birthdate blank.
*******
Leonie had taken Sharon to Jamaica two years earlier. There are no publicly available records pertaining to their outbound transport from the United States to Jamaica. There is, however, a record pertaining to their return to the United States. That publicly available record does not provide their address, but Sharon is identified as weighing 1 stone 5 pounds (a total of 19 pounds), and Leonie is identified as weighing six stone 5 pounds (89 pounds). Interestingly, Leonie used the name “Aileen Spiegel,” and the records assert that Aileen has no middle initial. Aileen was / is her true legal first name, but it is a lie to say that she has no middle initial.
*******
Almost two years later, on January 5, 1958, the Kingston, Jamaica Gleaner reported:
Staying at the Tamarind Hotel are Mr. and Mrs. Bob Spiegel and daughter Sharon of Miami, Florida. Mrs. Spiegel is the former Leonie Maxwell, daughter of Mr. and Mrs. W. J. Maxwell of Lucea and has been in the United States for several years. A welcome party in their honour was given last Saturday night by Messers. Horrace, Ray, and Dennis Maxwell, brothers of Mrs. Spiegel. It was a very enjoyable affair.
*******
In 1963, roughly five years after their 1958 visit to Jamaica, Leonie petitioned for naturalization, in Louisiana. Although I am in possession of the index showing that she petitioned in 1963, I do not possess the petition itself. However, the fact that she petitioned for naturalization in Louisiana demonstrates that that at least she was residing in Louisiana at the time. Since she stated that she didn’t leave Robert’s side for over 40 years, presumably Robert, young Sharon, and also baby Michelle were living in Louisiana at that time.
*******
People who knew Robert personally relate that he stated that Leonie was a Cayman Island heiress. She wasn’t. Not only was she not born in the Cayman Islands, Leonie’s father’s estate was litigated (with the judge ruling against her) long before Robert started telling people that his wife was a Cayman Islands heiress.
Leonie’s father did leave an estate, but not to her. On November 9, 1967, the Gleaner reported that the Supreme Court had upheld the will of the late William Josiah Maxwell, the father of Horrace, Ray, Dennis, and Leonie, and the husband of Daisy Maxwell, who had contended that William’s signature was a forgery and that the person to whom his estate had been bequeathed had exercised undue influence. The court disagreed. The article reported:
The estate, which one of the executors described as “a sizeable one,” included 112 acres of land at Paradise and three houses at Lucea, Hanover.
*******
Robert apparently wasn’t banking on Leonie’s inheritance in any event. In May of 1966, advertisements appeared in the Houston Chronicle with Robert’s photo on them, selling a record that would purportedly assist people in stopping smoking in seven days. He identified himself as “Dr. J. Robert Spiegel.”
*******
On page 55 of the November 15, 1969, San Antonio, Texas Express and News, was an advertisement stating:
SCIENCE OF THE MIND
Dr. J. Robert Spiegel of Houston, director and founder of the Science of the Mind Foundation there, is conducting Sunday evening meetings at 7:30 p.m. in the Sheraton Inn, 1400 Austin Hwy.
*******
On page 4 of the July 10, 1970 edition of the Fort Worth Star-Telegram was a photograph of Robert, with a brief local news blurb:
GUEST – Dr. J Robert Spiegel of Houston, Science of Mind Foundation director, will speak at the 10:45 a.m. service tomorrow in First Church of Religious Science, 2001 6^th Ave. His subject is “What Religious Science Teaches.”
*******
On page 8 of the June 18, 1970 edition of the Houston Daily Cougar was this advertisement:
HOME OF UNIVERSAL LIFE
“Teaching Aquarian Meditation For The New Age
Meets Every Sunday, 11:00 A.M. At The World Trade Center Auditorium
Houston, Texas
DR. J. ROBERT SPIEGEL (BRAHMADANDA) DIRECTOR - FOUNDER
Aquarian Meditation Initiation for the first time offered through correspondence. For those sincere students wishing to bypass evolution and enter the 5th Kingdom. Initiation includes meditation technique, Mantra, how to "live” 24 hours a day, and much more. Write for application today:
P.O. Box 53328 Houston, Texas 052
*******
From the Galveston Daily News, May 02, 1971, Pg. 31:
AQUARIAN MEDITATION SOCIETY PRESENTS DR. J. ROBERT SPIEGEL AN AUTHOR, LECTURER, TEACHER OF YOGA & SELF DEVELOPMENT WILL SPEAK ON MAN, MIND & THE UNIVERSE WEDNESDAY, MAY 5th AT 7:30 P.M. IN THE RECREATION CENTER HARRIS COUNTY PARK, NASA RD. # 1 ALL WELCOME — DONATION $1.50
*******
The 1972 Spiritual Community Guide lists Robert twice, in the San Diego area. First, on page 117, using his alias “J. Robert Spiegel”:
THE TEMPLE OF METAPHYSICAL ABUNDANCE. J. Robert Spiegel, 1118 Torrey Pines Rd., 92037. Teaches yoga, nutrition, ESP, metaphysics, psychology, mind control
Second, on page 124, in which he, as one might have predicted, was masquerading as some sort of medical man or scholar:
"AQUARIAN MEDITATION SOCIETY, U. S. Grant Hotel, Attn: Dr. Robert Spiegel, 453-7588"
*******
Also in 1972, Volume 25 of San Diego Magazine published in November advertised gift certificates for the “Astrology Research Center.” “Give your loved one the gift of love. Only $50” said the advertisement. Where was this entity located? At 1118 Torrey Pines Road, the same address as Robert’s Temple of Metaphysical Abundance. The advertisement purported that person identified as “Lil Canaan” was the director. The telephone number was 459-6400.
In 2013, the San Diego Union Tribune published the obituary for Lillian Mulonas, who founded the La Jolla “Astrology Research Center.” At this point in time, unless Robert Adams’ only surviving daughter, Michelle/ Prentiss/ Avantae knows the answer and talks, we will not know what relationship, if any, existed between Robert’s Temple of Metaphysical Abundance and Lilian’s Astrology Research Center, both of which were located at 1118 Torrey Pines Road in 1972.
*******
From the July 12, 1973, San Diego Reader:
BRAHMADANDA FOUNDATION
“Teachings of the Cosmic Way” meets Sundays, 11:00 a.m., U.S. Grant Hotel, Crystal Room. Free admission, refreshments served. Call 453-7588 for more information.
*******
On page 51 of the June 29, 1974 edition of Phoenix’s Arizona Republic was the following advertisement:
Speaker from San Diego
Dr. J. Robert Spiegel from San Diego, a traveler and lecturer, will speak at 8 p.m., Friday in Universal Series Center, 4340 N. Seventh Ave., on the topic “Science of Being.”
He is the founder of the “Aquarian Meditation Society” in Jamaica and is founder and publisher of “Equinox,” a philosophical newspaper.
*******
The family (Adams or Spiegel, however one might want to refer to them) have resided in (that I know of) New York, Miami, Jamaica, Louisiana, La Jolla, Los Angeles, Houston, New Mexico, Hawaii, Las Vegas, Scottsdale, Sedona, and a number of cities in North Carolina.
*******
In at least the 1990’s, before he left for Sedona, Robert Adams used the address PO Box 7210, Jordan Avenue, D-30, Canoga Park, CA. He used that address on correspondence he wrote, and on at least one published document. Who else used that address? The data aggregators show that this address was also used by a Michelle K. Spiegel, and a person going by the name Leonie Maxwell. Michelle and Leonie also used other addresses associated with Robert, those being 1815 Willis Avenue Panorama City, and 21551 Burbank Boulevard, Woodland Hills.
*******
The California Birth Index shows that Michelle K. Spiegel was born on October 1, 1960, in Los Angeles County, to a mother with the maiden name Maxwell.
*******
In later life, Michelle used the addresses above that are associated with Robert and Leonie, as well as an address of 12004 Vanowen Street #14, North Hollywood. This is the same address at which Denniston Keith Maxwell, one of Leonie’s younger brothers, resided at, after his immigration to the United States. Denniston was one of Michelle’s uncles.
In a recent Facebook posting, Michelle/Avantae stated: “Never knew anything personal about said uncles, etc. Never asked, never cared.” Really? She shared an address with an uncle? Her uncle lived within a few minutes’ drive from her parents, and Michelle/Avantae never knew anything about him?
As an aside, Michelle/Avantae alleged (or admitted) that she “never cared” about anything personal regarding her uncles. If that is true, what does that tell us about Michelle/Avantae’s fundamental character? Antisocial? Psychopathic? Narcissistic in the extreme?
*******
On August 2, 1996, Michelle, going by the name Avantae E. Deven, married Tyson Ruben Alvarez in Las Vegas. The two had addresses in common in Arizona, Nevada, and Montana.
*******
Robert “Adams” died on or about March 2, 1997, in Sedona, Arizona.
Shortly after that, in the spring of 1997, “Nicole Adams” and “Avantae Deven” (both aliases; the correct legal names are Aileen Beverly Leonie Spiegel and Michelle K. Spiegel) purchased a home together in Sedona, on Navahopi Road. Shortly after the purchase, “Nicole” quit-claimed her portion to “Avantae.”
On July 17, 2001, Tyson, still married to “Avantae,” quit-claimed any interest in the Navahopi property to “Avantae,” and had the county recorder send the deed to “Avantae” in care of the Infinity Institute, at that time located at 9101 W. Sahara Ave. Suite 105 C29 (in other words, a private post box), in Las Vegas.
Avantae divorced Tyson in 2006. She had, by then, moved to North Carolina. She “served” Tyson via publication summons, claiming that she was unable to find him, despite his information being on multiple data aggregators.
You can go to various Facebook groups, and other sources, to pull up the documents that people have uncovered showing who is associated with the "Infinity Institute," and in what fashion, and also the addresses that they have used over the years.
In any event, this is the information regarding Robert that I think that people need to be aware of.
Why turn to a known liar and con man for spiritual guidance?
1A tallis is a prayer shawl.
2The ship’s manifest states that he was age 14, which conflicts by one year with what Samuel identified as his date of birth. These errors are not uncommon; his fare could have been purchased when he was age 14 and the records not updated.

News Link: https://www.newmediawire.com/news/us-nuclear-corp-announces-annual-2023-financial-results-7074909
LOS ANGELES, CA - (NewMediaWire) - May 14, 2024 - US Nuclear Corp. (OTC-QB: UCLE), a leading manufacturer of advanced radiation, chemical, and biological detection and smart UAV instrumentation, announced the annual results for the year ended December 31, 2023.
~2023 Annual Highlights~
● Total sales revenue of $2,231,095 compared to $2,091,366 the previous year, an increase of $139,729 or 6.68%
● Gross profit of $924,306 as compared to $788,068 the previous year, an increase of 17.29%
● Gross margin was 41.43% as compared to 37.68% the previous year, an increase of 3.75%
● Selling and General and Administrative expenses increased by $281,851 or 12.34% due to increase in payroll costs for new employees and increase in professional fees
● Other expense of $1,792,160, an increase of $1,245,396 from the year prior, which is largely due to amortization of debt discount
● Net loss of 3,433,804 compared to $2,042,795 the previous year, a change of $1,391,009
Robert Goldstein, CEO of US Nuclear Corp., commented:
“We are happy to report that sales revenue has continued to grow for 2023, up another 6.68% from the previous year. Our gross profit and product margins are also up as we proceed to sell highly specialized products that continue to grow in demand, commanding high markups and good profits. In particular, sales of our tritium monitoring products have increased as the use and market demand for these products surges.
With fusion energy research and fusion power ushering in a new trillion-dollar industry, our tritium monitoring products will be at the center of this revolution and will see explosive growth as we are currently the go-to provider for tritium monitoring solutions.
We are also excited about our unique new PFAS monitoring product which can be used to detect even trace amounts of PFAS contamination below the EPA’s strict new limits that were recently put into force. With the EPA’s new standards requiring all companies and water utilities to start monitoring PFAS way down to a few parts per trillion, we expect to see an influx of new business for this product line.”

I'm 28F, only taking antidepressants and iron supplements for anemia.
So I received my blood test results and have my pre-scheduled follow up appointment tomorrow but I wanted to see if I could get some insight here?
white blood cell count is low (3.3), as is neutrophils (1228), hemoglobin, hematocrit, mch, and mchc. There's also trace leukocyte esterase in urine.
I am a bit freaked out because my cousin was recently diagnosed with colon cancer and is going through chemotherapy now, so of course my mind is going 0-100 in what the results could be indicating. Iron levels were normal, which was a surprise cuz I've been easily fatigued that I thought would be related to the anemia.
Any insight would be greatly appreciated!

Hey all,
Ran into a bit of a strange situation and looking for some ideas on possible causes before I just rip out and rewire the entire room. I was trying to trace a line and was toning it with my Fluke Pro3000. While toning I was unable to tone the line down stream but instead noticed I could catch the tone very clearly off all of the power lines. I was able to trace the runs for the power through the walls of the room since the generated field off the lines was carrying that tone. I believe this would mean that there is some sort of nic of cable that is contacting conduit or power somewhere up stream. The odd part is that the network connection for this line is working. The reason I was investigating is because just the ip phone system wont connect. It meshes with the main network and then delivers to our endpoints.
I assume this is going to be resolved by at the minimum re running the ethernet but just curious if anyone has experienced anything like this before?

TL;DR: How come a third party software like Disk Drill is able to read my drive and retrieve my files while macOS can't? I just want to understand what the issue or culprit is? And if I should replace my HDD or just format it?
I've had my 5TB WD Passport for just over a year and all of my school work is stored inside of that drive.
Today when I was at the print lab, I plugged in the drive into my macbook and noticed it wouldn't pop up on my desktop screen or finder. Eventually I found out it didn't want to mount and every time I tried to use first aid I would get this message (see below).
I started to freak out, but then a friend helped me out and told me to install Disk Drill to recover my files. It's been a few hours and Disk Drill is still recovering and tracing back all of my files, which I'm very thankful for! I just really want to understand what the issue or culprit is?

Running First Aid on “Container disk3 ”Checking storage system and repairing if necessary and if possible
Performing fsck_apfs -y -x /dev/disk2s2
Checking the container superblock.
error: (oid 0x401) nr: invalid o_oid (0x4877)
error: (oid 0x401) nr: invalid o_type (0x80000003, expected 0x80000011)
error: verification/reading of the nx_reaper object failed: Illegal byte sequence
warning: checkpoint 205 (xid 18563) failed consistency check
error: (oid 0x401) nr: invalid o_oid (0x48d7)
error: (oid 0x401) nr: invalid o_type (0x80000003, expected 0x80000011)
error: verification/reading of the nx_reaper object failed: Illegal byte sequence
warning: checkpoint 203 (xid 18562) failed consistency check
warning: (oid 0x401) nr: invalid o_cksum (0x6fb1)
error: verification/reading of the nx_reaper object failed: Illegal byte sequence
warning: checkpoint 201 (xid 18561) failed consistency check
error: (oid 0x401) nr: invalid o_oid (0x48d3)
error: (oid 0x401) nr: invalid o_type (0x80000003, expected 0x80000011)
error: verification/reading of the nx_reaper object failed: Illegal byte sequence
warning: checkpoint 199 (xid 18560) failed consistency check
error: (oid 0x401) nr: invalid o_oid (0x48d9)
error: (oid 0x401) nr: invalid o_type (0x80000003, expected 0x80000011)
error: verification/reading of the nx_reaper object failed: Illegal byte sequence
warning: checkpoint 197 (xid 18559) failed consistency check
error: (oid 0x401) nr: invalid o_oid (0x403)
error: (oid 0x401) nr: invalid o_type (0x80000002, expected 0x80000011)
error: verification/reading of the nx_reaper object failed: Illegal byte sequence
warning: checkpoint 195 (xid 18558) failed consistency check
Checking the checkpoint with transaction ID 18557.
Checking the space manager.
Checking the space manager free queue trees.
Checking the object map.
Checking volume /dev/rdisk3s1.
Checking the APFS volume superblock.
The volume 5TB was formatted by diskmanagementd (2142.81.1) and last modified by fsck_apfs (2236.101.1).
Checking the object map.
Checking the snapshot metadata tree.
Checking the snapshot metadata.
Checking the document ID tree.
Checking the fsroot tree.
error: directory record (id 20): invalid hash (0x0, expected 0x1b3b1d) of name (ffc8007524c54f81)
error: directory record (id 20): invalid hash (0x0, expected 0x39b224) of name (ffc8007524c54f82)
error: directory record (id 20): invalid hash (0x0, expected 0x44485) of name (fseventsd-uuid)
error: (oid 0x46c3) apfs_root: btn: invalid o_oid (0x4037c3)
error: (oid 0x46c3) apfs_root: btn: invalid o_xid (0x4863, expected 0x485c)
error: (oid 0x46c3) apfs_root: btn: invalid o_type (0x40000002, expected 0x3)
error: (oid 0x46c3) apfs_root: btn: invalid o_subtype (0xf, expected 0xe)
error: (oid 0x46c3) apfs_root: btn: invalid o_type (0x40000002, expected 0x3)
warning: aborting jobj validations for current fsck pass - trying to repair fsroot tree with invalid nodes
error: (oid 0x6ad) apfs_root: btn: invalid o_oid (0x4039df)
error: (oid 0x6ad) apfs_root: btn: invalid o_xid (0x4870, expected 0x478d)
error: (oid 0x6ad) apfs_root: btn: invalid o_type (0x4000000b, expected 0x3)
error: (oid 0x6ad) apfs_root: btn: invalid o_subtype (0x0, expected 0xe)
error: (oid 0x6ad) apfs_root: btn: invalid o_type (0x4000000b, expected 0x3)
error: (oid 0x6ab) apfs_root: btn: invalid o_oid (0x2cad)
error: (oid 0x6ab) apfs_root: btn: invalid o_xid (0x4866, expected 0x478a)
error: (oid 0x3257) apfs_root: btn: invalid o_oid (0x403925)
error: (oid 0x3257) apfs_root: btn: invalid o_xid (0x487a, expected 0x4867)
error: (oid 0x3257) apfs_root: btn: invalid o_type (0x4000000b, expected 0x3)
error: (oid 0x3257) apfs_root: btn: invalid o_subtype (0x0, expected 0xe)
error: (oid 0x3257) apfs_root: btn: invalid o_type (0x4000000b, expected 0x3)
error: (oid 0x45ce) apfs_root: btn: invalid o_oid (0x402)
error: (oid 0x45ce) apfs_root: btn: invalid o_xid (0x485e, expected 0x4859)
error: (oid 0x45ce) apfs_root: btn: invalid o_type (0xd, expected 0x3)
error: (oid 0x45ce) apfs_root: btn: invalid o_subtype (0x0, expected 0xe)
error: (oid 0x41ba) apfs_root: btn: invalid o_oid (0x40391d)
error: (oid 0x41ba) apfs_root: btn: invalid o_xid (0x4863, expected 0x47b1)
error: (oid 0x41ba) apfs_root: btn: invalid o_type (0x40000002, expected 0x3)
error: (oid 0x41ba) apfs_root: btn: invalid o_subtype (0xb, expected 0xe)
error: (oid 0x41ba) apfs_root: btn: invalid o_type (0x40000002, expected 0x3)
error: (oid 0x47dd) apfs_root: btn: invalid o_oid (0x402)
error: (oid 0x47dd) apfs_root: btn: invalid o_xid (0x485d, expected 0x478d)
error: (oid 0x47dd) apfs_root: btn: invalid o_type (0xd, expected 0x3)
error: (oid 0x47dd) apfs_root: btn: invalid o_subtype (0x0, expected 0xe)
error: (oid 0x4745) apfs_root: btn: invalid o_oid (0x45c1)
error: (oid 0x4745) apfs_root: btn: invalid o_xid (0x4866, expected 0x478c)
error: (oid 0x48a4) apfs_root: btn: invalid o_oid (0x4037ee)
error: (oid 0x48a4) apfs_root: btn: invalid o_xid (0x4864, expected 0x4848)
error: (oid 0x48a4) apfs_root: btn: invalid o_subtype (0xb, expected 0xe)
error: (oid 0x48a4) apfs_root: btn: invalid o_type (0x40000003, expected 0x3)
Checking the extent ref tree.
error: (oid 0x4038ea) apfs_extentref: btn: invalid o_type (0x40000002, expected 0x40000003)
error: (oid 0x4038ea) apfs_extentref: btn: invalid o_subtype (0xb, expected 0xf)
Extent ref tree is invalid.
The volume /dev/rdisk3s1 with UUID A21B1541-3B8F-48A0-9D47-06546735480C was found to be corrupt and needs to be repaired.
Verifying allocated space.
warning: found spaceman free queue tree entry (0x403918+1, xid 18532) which overlaps with existing range (0x403918+1)
warning: found spaceman free queue tree entry (0x4038aa+1, xid 18534) which overlaps with existing range (0x4038aa+1)
warning: found spaceman free queue tree entry (0x403908+1, xid 18534) which overlaps with existing range (0x403908+1)
warning: found spaceman free queue tree entry (0x4038a4+1, xid 18542) which overlaps with existing range (0x4038a4+1)
Performing deferred repairs.
error: Unable to perform deferred repairs without full space verification
The container /dev/disk2s2 could not be verified completely.
Storage system check exit code is 8.
Storage system verify or repair failed. : (-69716)
Operation failed…"

welke commando's kunnen worden ingetikt?
Switch>?
Exec Commands:
Connect-Open a terminal Connection
Disable-Turn off privileged commands
Disconnect-Disconnect an existing network Connection.
Enable-Turn on privileged Commands
Exit-Exit From the EXEC
logout-Exit From the EXEC
Ping-Send echo messages
Resume-Resume an active network Connection
Show-Show running System information
SSH-Open a Secure Shell Client Connection
Telnet-Open a telnet Connection
Terminal-Set terminal line parameters
Traceroute-Trace route to destination

is there any reason for the drop to be 6-30?? it has been like this for years, and is really bad and unconsistent!! doesnt feel rewarding because it feels so shitty to get the lower rates.. even with a booster it feels bad to get under 20 traces per run.. imo the drop rate should be 20-30 with a bonus for endless fissures. it is so simple and yet it would make the experience so much better

Could this be kidney stones?
Female, 40s - In pain while waiting to hear next steps from PCP. I received test results last night (see end of post), but PCP has not actually viewed them yet. Feel like I should be doing something but no idea what.
Summary of pain: Friday night felt achey gnawing pain under left ribs that radiated to left shoulder and down left arm. Assumed it was trapped gas after very heavy meal.
The pain was unchanged in the morning so took Gas-X. Eventually maxed out the recommend daily dose. Did lots of burping, but never experienced any relief of pain.
By Saturday afternoon pain was more focused under left rib cage, with flank pain and some tenderness to left of belly button. Periods of INTENSE spasms in upper left abdomen began. Felt like a squeezing and releasing in intestine but no idea what was actually happening. Painful spasms overwhelmed me with every attempt to get a good breath. The pain was SEVERE, the worst I’ve ever felt. I was screaming and begging for help during these episodes, which lasted about 5 minutes each.
This happened three times over a few hours, and each time I seriously considered calling an ambulance but didn’t because of fear of cost and that it would be determined to be “just gas.”
The underlying pain through all of this was constant. By Sunday morning I could no longer take a deep breath due to the severity of constant pain under left ribs, but the spasms didn’t return.
No appetite since Friday, but tried eating a bland meal Sunday evening. Drinking water after meal produced sudden intense pain and feeling of food moving in upper left abdomen. Thought maybe there was a blockage that was clearing. Wondering now if something was just inflamed. Pain only lasted a few seconds and was enough to make me gasp.
Bowel movements small and poorly formed throughout all this. Frequent urgent watery diarrhea started 3am Monday. I went to the doctor on Monday.
It’s now Tuesday, and I am still in terrible pain under my left ribs and into my left side. Cramping sensation with every shallow breath. Sneezing feels like something is tearing. I can’t even complete the sneeze without shouting from the pain. I can’t get a deep breath or cough without triggering sharp pain.
Experiencing occasional involuntary gasps, much like when you take shaky breaths while crying.
Blood oxygen is normal.
Possibly relevant: Two days before this began, I felt intense pulling and cramping in bladder. This came and went along with frequent urination (which exacerbated pain) for a few hours and then it was gone.
No fever. No vomiting. No history of health anxiety or emetephobia, but if I were to need to vomit at this point, I don’t know how I could with current pain level and the way it intensifies with deep breath or exertion. I am frightened.
Summary of doctor’s visit and tests:
Saw primary care doctor yesterday for physical exam. They ordered a urine test, upper left abdominal x-ray, and left lung x-ray.
Results:
ABDOMEN RADIOGRAPHY CLINICAL HISTORY: Acute onset LUQ pain 5/10, still persistant with loose stools, but no fever or vomiting. TECHNIQUE: 1 view. FINDINGS: Bowel Gas Pattern: Within normal limits. No dilated loops.
CHEST RADIOGRAPHY CLINICAL HISTORY: LUQ pain and decreased breath sounds at L lung base Left upper quadrant pain Other abnormalities of breathing. TECHNIQUE: 2 views. FINDINGS: Lungs/Pleura: Minimal left basilar parenchymal opacity. No pneumothorax or significant effusion. Mediastinum: Heart and mediastinal contours are unremarkable.
Urine (Urine, Clean Catch)
Color value: orange Clarity value: turbid pH: 5.5 Specific gravity: 1.019 Protein value: trace Blood value: 2+ Red blood cells value: 3-5 Bacteria value: few Mucus value: 2+ Amorphous crystals value: 2

Hey guys, upgrade post because I'm behind the times and starting to get some concerning fps drops in a handful of games. Am I at the point of upgrading or should I be more diligent in hunting down the cause of issues? Primarily time constrained, not purely lazy/uneducated.
Mobo: Strix x570-e
GPU: EVGA 2070 Super
CPU: Ryzen 3700x
Ram: 2 8gb GSkill DDR4
Relevant hard drive: OS on 970 evo plus
Monitor: ROG PG278Q, 1440p 144hz
PSU: RM850x
I'm on a triple monitor setup with a handful of peripherals, mostly Razer, if relevant
Hopefully that's all the useful info, if something else is relevant let me know please!
Budget doesn't have a firm number, but I run middle of the road generally. Not fighting to do 4k ray tracing or anything really nuts.
Appreciate any suggestions or helpful info!
Edit: ease of reading