Briggs and stratton 393397 repair diagram

RGA42FM wiring problem

2024.05.16 04:55 Ok-Proof772 RGA42FM wiring problem

So I got this secondhand RGA42FM and the wires are all kinds of fucked up, which I knew when purchasing it but I underestimated how complicated it would be to fix. I have a soldering iron I just can't seem to figure out which wires go where--the official wiring diagram (attached) doesn't seem to line up, like at all. It looks like the selector switch is different, the wires aren't the right colours/not enough of them and I there's only one knob in the diagram even though the guitar has a volume and tone knob. Basically I'm completely lost so any clarification would be appreciated. I'd like to avoid taking it in to pay for repairs when I have all the equipment myself..
https://preview.redd.it/bxrj6y85ep0d1.jpg?width=3024&format=pjpg&auto=webp&s=92970d71f5167e44d0f1a734d1909aedb3692924
https://preview.redd.it/xbop03v5ep0d1.jpg?width=3024&format=pjpg&auto=webp&s=9c6b84fb0858aa9cc23dae7fbb1f8f4abe52b8a9
https://preview.redd.it/pvft4ce6ep0d1.jpg?width=4032&format=pjpg&auto=webp&s=ec36b453a47cee17afc120fc042fb75b6a441cd3
https://preview.redd.it/x7or5zs7ep0d1.jpg?width=2000&format=pjpg&auto=webp&s=4931d559892eee79612501a4d7faabfe982a1ac6
submitted by Ok-Proof772 to Ibanez [link] [comments]


2024.05.16 03:07 Jaybro838 Wiring diagram for Murray Mower?

I’m looking for a wiring diagram for my 1994 Murray LTX ride on lawnmower (18hp-46”) opposed cylinder (Briggs and Stratton) I put a new switch in and now the fuse keeps blowing every time I turn it, I might have gotten the wrong switch but I just want to make sure I’m wiring it right so I need a diagram, but I can’t find anything online for it at all. Can anyone help?
submitted by Jaybro838 to lawnmowers [link] [comments]


2024.05.16 00:21 KarlosHungus36 "When did you last speak with her?"/"The boys found this, on the floor in back of the Caddy."

"When did you last speak with her?"
P14 Gordon asks Diane about her half sister Jane. 'speak' -- Peaks. Shortly before that, Albert told Tammy about Lois Duffy and mentioned that she did not have a twin sister (Tammy said 'conjured' alt 'conjoined;' an alt version of Duffys are twins? link to 'doubleheader in Vegas?'); so we have twin & alt 'speak' mentioned close together (alt 'Twin Peaks'). Twin alt 'twine' - Diane on the chair, alt bound like Laura was in the cabin? Finley's 'Fine' Twine, alt 'fair' city. The FBI room is alt Jacque's cabin? Gordon alt Jacques (alt Cousteau, alt team on underwater expedition, 'before I came up'), Albert alt Leo, Tammy alt Ronette. A couple times the trio were waiting for Diane to arrive ("Diane's on her way" P12 and P14), alt trio by the Corvette waiting for Laura; Diane when she came in talked about Cooper returning and raping her, Cooper is alt James and she's alt Laura? (visual with Cooper kissing Diane). So Diane & Cooper blend into the roles of James & Laura, FBI team alt the trio on the night of Laura's death. Gordon alt Jacques - 'high school sandwich,' P9 Gordon stands between Tammy and Diane, alt they are smoking outside the HS, Bill a HS principal is questioned in the next scene, Bobby linked directly to the TP HS in the previous scene, Lucy was just eating a giant sandwich; conference room alt a teacher's lounge, grown up Bobby alt the assistant principal (alt Betty) the assistant to Bill? Frank alt the principal? his office alt the principal's office? and a link between Bill Hastings and Frank Truman? more below.
FBI trio alt trio of Jacques (Gordon), Leo (Albert) & Ronette (Tammy). Waiting for Laura alt Diane 'on her way'; Diane sits on the chair alt 'bound' like Laura.
"The boys found this, on the floor in back of the Caddy."
Mulholland Dr., Detective Neal Domgaard played by Brent Briscoe (Dave Macklay) - his boys found a pearl earring inside the Cadillac at the scene of the car accident, belonging to Rita/Camilla. P1, Detectives Harrison and Macklay arrive to the Hastings home with 'the boys' and search Bill's house and car. Phyllis is not happy about it, turns to look inside and we get a long look at her pearl earring {Phyllis alt Rita? killed at her home, alt from the hit in MD; MrC alt the hitman "you did good...you follow human nature perfectly" cryptic comment, similar to Joe at Winkie's "when it's finished you'll find this where I told you."}. The other detective in MD, Harry McKnight, played by Forster (Frank Truman). P5 Frank's wife Doris storms into Hawk's office and complains and berates Frank about various issues at the house, she's alt Phyllis, Frank alt the husband? (in Bill's spot, see above). Macklay says that he knows Bill from high school alt Frank/Forster, his former partner whose prints were found at the crime scene and who he interrogates in P1? (Dave alt 'Neal Macklay'). Mack said Bill's prints were 'all over' Ruth's apartment. P9 Frank is given Garland's 'tube' by Betty, he touches all around it looking for a seam or button to open it (P11 Frank also touches Hawk's map, which had been rolled up like the notes inside the tube). 'Garland's tube' alt to 'Ruth's apartment?' Former contains two notes, latter contained two partial bodies. Officers Olson and Douglas P1 needed help getting into Ruth's apartment, had to go back outside to find maintenance man Hank, alt Frank & Hawk need Bobby's help to open the tube, had to go back outside; an alt version of Bobby, maintenance man at the station? So [Garland's tube] is alt to [Ruth's apartment] (two rolled up notes inside the tube alt bodies; Hawk's map also was rolled up, alt a body? Frank touches it, link to P17 Cooper to Frank "don't touch that body!"). In MD, there's another Ruth (Elms), the girls stay at her apartment and bring back another strange device that opens like the tube - the blue box. Betty, like Frank and the tube touches it all over (a different Betty gave Frank the tube) (maps - Betty & Rita look at a map before going to Sierra Bonita alt Frank & Hawk looking at the map before going to Jack Rabbit's, both scenarios involve long walks leading to bodies - the corpse or Naido; alt - Naido is a map? ("she's alive" alt to Hawk's map being a 'living entity') merges with MrC at death in P17 ("don't touch that body!") (who was also at the same site where Naido was found in P17, before he went to the station) going backwards into the story (like getting rolled back up into a 'map'; alt a rug, Frank Lebowski alt).
Garland's 'tube' alt the blue box in MD. Frank touches it all over link to prints all over Ruth's apartment.
What's inside the blue box? We see a black void, link to the black symbol on Hawk's map? (might be alt Judy's, where Cooper goes P18, alt he was following the map, curiosity alt 'Caddy?' version where he arrives in a Cadillac in place of the Lincoln Towncar (link to the Chevy dealership P5); link to Blue Velvet, Kyle's character was just 'really curious;' killed the cat, Judy alt a cat? black?). Alt - the blue box was found by Macklay's boys at the crime scene (in MD the box ends up in Ruth's apartment and in P1 the crime scene is also in a Ruth's apartment); scenario where Macklay has it but can't open it? P1 Constance running prints at her computer, monitor black and blue background alt it's the box itself? (Rita's fingers alt Constance's in the POV shot) (the box also analyzes things? link to the glass box in the same part, [computer processing softly] in captions, Tammy is paired with Macklay P11 brining coffee and donuts, alt Tracey with Sam, Mack has the box alt Sam and the glass box; computeequipment also linked to the FBI's hotel room, inside of Diane's purse POV alt inside the box; inside/out in flux?). Constance, besides running analyses, holds Garland's body, alt there's a body inside the box? (layer collapses - with no Constance, the box itself = a body? link to Betty vanishing in a collapsed layer? corresponds with Frank finding the tube, no Betty? maybe merged with Hawk, alt finding the tube inside something in place of the pages). Rita opens the box in MD - numerous parallels between her and Cooper from the perspective of Watts (Betty or Janey-E), alt it's who Cooper opens it? (Pilot: Cooper and Harry in the conference room try to open Laura's diary, which was hidden in her bedroom alt the box hidden in Ruth's bedroom closet, but no key for the diary, so Dale just breaks its open, link to P9 and the tube which they couldn't open. Opening the box sends him to Judy's (possible link to the map symbol) and combines his 'head' with Garland's body? He wakes up at the hospital in Las Vegas (female doctor alt Constance overseeing Garland's body in Buckhorn) ('Headley' alt to 'Macklay?' LV vs Buckhorn versions; Headly signifies a 'head' level of the story? Mack signifies a 'truck' level, or world? world of truck 'drivers' alt doppelgangers? Cooper P2 looks out of the red room and sees his doppelganger (who is 'in Buckhorn') driving, alt a truck).
Two mountain peaks behind clouds in P5 alt Blue Pine Mountain & White Tail Peak? The cross symbol alt the Chevy logo. Cooper P18 alt driving (in 'Caddy' in place of Towncar) looking for Judy's alt black symbol on the map.
Blue box alt Constance's computer; black and blue. Macklay alt has the box from the crime scene.
Summary: Macklay (alt Neal) and his boys find the box at the crime scene from P1, old partner's prints (alt Frank) are on it, Cooper (alt Lt Knox) arrives to investigate and alt to him and Harry in S1 and the diary in the conference room (and link to Hawk's map and the 'Judy' symbol also in the conference room), he opens it using force, transports him to a world where he's the 'head' that combines with someone else's body (which was inside or represented by the box). Since Ruth Davenport's head is combined with Garland's body in P1, is Cooper is alt 'Ruth?' [Both Ruths are red haired like Lt Knox (also like Linney James who walked down the hallway at Universal Studios like Cindy Knox at the morgue in Buckhorn), alt Cooper in her spot who was sent by Gordon alt Col Davis?]. Ruth link to 'Roth' (Tim)? Hutch in P9 parallels the maintenance man Hank in P1 (both have mystery bags and stand by trucks); maintenance man also alt Bobby who broke open the box outside with force alt using tools, in place of Dale in the conference room forcing open the diary. {P5 Doris "I told you this!" link to 'Soulja Boy I told you' (soak link), Crank That; next scene P5 a boy Sonny Jim alt Soulja (dance link to Teach Me How To Dougie); Cooper P4 alt a maintenance man in the Jones kitchen fixing something? links between Briggs and Jones houses (visual 1 and visual 2); Garland mentions his soul when he went to the white lodge, returns home in S2 parallel to Cooper P18. So 'soul' linked to the Jones house and Cooper's presence there, alt Ruth/Roth}. Alt to a simple head & body (opener of box and box) - soul and body? Or soul and mind? Alt - a golden box represents a soul? (close to the cardboard box in P11?). Box or cube alt to the spherical 'seed?' The vehicle (shape like box or tube) represents a physical body, inside it (alt an apartment) or merged with the soul; which is 'opened' by a 'mind'? P17 - Gordon says that Jeffries was on to Judy (alt looking the place indicated by the black symbol on the map) and that Garland and Cooper were also onto Judy. Jeffries no longer exists, at least not in the normal sense, alt he lost his mind? Cooper takes over as the 'mind' (or alt curiosity) who combines with the soul (Garland) to continue the quest for Judy? A story with Cooper alt Roth, literal maintenance man, fixes something in the Jones house/kitchen (link to Hawk stopping by to check in on and help Sarah who is a widow), has or acquires the soul of her late husband? 'Mend' (to repair) alt 'mind'; Cooper following in the footsteps of Jeffries, literal repair man in the body of Roth/Hutch alt 'apartment' of Ruth ('story' alt body; two stories alluded to by Charlie, link to "3 bodies?" Lorraine, alt 3 stories?). Summary 2: repair main has or acquires the soul of late husband, falls in love with a widow, named Judy? Flip side: curiosity killed the cat, named Judy, black cat? (alt the bum in MD?) Like a black trap that a curious person falls into; alt scenario - Cooper (alt Jeffery, in BV?) digs up dirt on the girl he's falling for, which ends up killing the romance? Link to Diane in S3 "none of your fucking business" she's alt Sandy if the romance with Jeffery didn't pan out.
Hallway walks, Lt Knox parallels Linney James.
-P9 outside in the parking lot Bobby throws the tube against the ground, police cars blue and black in the lot link, to the blue box in MD (black void inside), 'throwing' link to the Mitchums (Bradley doesn't trust that rat fuck Anthony as far as he can throw a car), Frank & Hawk alt the brothers who can't open the box; Candie alt Bobby their sidekick, link to Castigliane Brother; Bobby alt or 'Bobby Mitchum?' (brothers Brad & Rod, B & R, alt Betty and Rita?). Mitchums place P10, has pool alt to Adam's house on MD, alt they have the blue box or something similaalt and can't open it? (gold box? similar to the cardboard box Cooper brings P11, alt he's the tool man who helps them open it).
Mitchum brothers alt Frank & Hawk; or alt 'Bobby Mitchum' opens the device (alt a box), Brad & Rod, B & R, alt Betty & Rita? Cooper P11 brings the cardboard box and it's opened, alt helps them open a box?
-P9, Dave Macklay walks at the morgue and tells Albert details around the body (alt Gerard walks with Cooper), says Ruth's head was 'atop' the body of Major Briggs. 'atop' alt stop, link to Richard, alt Richard and Linda as the body & head? Richard and Linda - 'ra' and 'la' missing a 'u' to make 'Laura?' alt version where Laura is found dead in bed in her room? Pete finds corpse in the Pilot, alt he's her younger brother? "oh dear" calls the sheriff etc. parents not home, on road trip alt Gordon (alt Garland) and Diane (alt wife Betty) traveling P9 ("is it alright if we make a short trip to Buckhorn"), daughter alt 'Laura Briggs?' The 'U' - link to Silver Mustang? (casino logo is a horseshoe, U). P5, Lucy 7 Insurance L/R with 'u' (alt casino - transition P5 from agency to casino; Mitchum Brothers MB alt Bushnell Mullins BM), with a conference room alt the station P4 (Laura's case evidence spread out). Conference room links to bedroom - rolled up map alt rug in Ruth's, where Dale opens the diary (and where the tube is not opened) alt the blue box.
submitted by KarlosHungus36 to twinpeaks [link] [comments]


2024.05.15 21:15 dabluebunny Engine surges and sputters only at full throttle after it starts to warms up.

The original carb was shot (owner broke one of the plastic arms for float, and parts were missing). I replaced the carb, and runs, but I feel like it could run smoother.
Engine is a Briggs and Stratton 219907-0131-E1 Cylinder Head
(Snapper 7800104 - 2812523BVE, 28" 12.5 HP Rear Engine Rider)
I've tried both the Briggs and Stratton 590399 and 593432 carbs, and the governor arm dances a bit. Both carbs have no adjustments (that I am aware of besides widening out a jet), and I cannot figure out how to get the hiccups to stop.
For reference the machine came to me with a crank case FULL of gas, and I have;
-Cleaned machine of debris/ grass/ and oil grime
-Drained the oil/ gas, and flushed with new oil
-New oil
-new fuel lines, filter, and added a shut off
-New carb
-New gaskets from carb to engine head
-New air filter
-New plug
My thought is it must be valves, but I've done valves before this I feels like a fuel air thing.
Link to video
What are your guys thoughts?
Thanks in advance! I appreciate any help, or advice!
submitted by dabluebunny to smallengines [link] [comments]


2024.05.15 20:35 johnandbuddy Cant find the part number or even name of this piece.

So I did a differential replacement the other day and when i was taking the axle out, I damaged this ring, its kind of like an o-ring but not rubber its actually a very tightly wound spring, in a circle. I have never seen anything like it, and I can not find anything on it I have looked at a bunch of part assembly diagrams and there is no mention of it. I feel like I am going crazy, even going through this CV axle repair booklet has not mention of it https://www.mellens.net/mazda/Mazda-Miata-1997/axle_shafts.pdf
I have a new axle coming and I am hoping it comes with one, then I will take the good one (which is on the axle that is broken) and swap it to the other side. But I wanted to order one incase the new axle doesnt have it. Why cant I find any info on it, hahah I am pretty good at searching stuff and have spent the last hour trying to find it with no luck. There is a ton of info on the snap ring that is at the end of the axle shaft but nothing on this spring ring gasket/seal/or whatever the hell it is. Sadly I do not have a photo right now.
Edit: this is a 1999 nb 1.8 base model 2nd Edit: Or should I just remove the busted one and put it back together without it. I have have watched several axle replacement tutorials and I dont even see these mysterious spring circle thingies in them. Like... what the heck
submitted by johnandbuddy to Miata [link] [comments]


2024.05.15 18:13 kucksrickbid Engine surging when hot

Engine surging when hot
I have a 17 163cc Briggs and Stratton lawn mower engine. Always ran great first pull no issues. This year I took it out and wouldn't start up. Took it apart checked everything over, fresh gas, fresh oil and got it running. I've now noticed though that when running it, when the choke thermostat gets up to temperature and the butterfly valve to the carburetor opens up fully, the engine will start surging or hunting. I just have a couple questions. 1) has anyone seen this before and know how to fix it? 2) what harm would be done to the engine besides burning a richer fuel mixture by disconnecting the thermostat from the choke?
Thanks for any knowledge. New to this but figured it's something worth trying to understand!
submitted by kucksrickbid to lawnmowers [link] [comments]


2024.05.15 15:44 Inner_Mistake_3568 How do I move on

I really dislike my job. It’s mechanical assembly tech for switchboards I don’t dislike the physical work but I do dislike the disrespect. I do not feel like a person who’s valued here. A pretty far cry from how I felt at my last job. I have skills, I know how to solder, I read mechanical and circuit schematic diagrams and build 7ft-9ft tall units lifting and tieing metal together that weighs 50-100lbs with bolts and making it look good. It’s not just building just to build I can make 20 pieces of metal look like one peice if u stare at it from 3 meters away. I know I have skills yet this place treats me like I’m highly replaceable, I want to show them I’m not by leaving. I just don’t understand what work I qualify for anymore.
Skills: Mechanical assembly Power tools/hand tools Soldering Ohm meteoscillator reading 1 year of credits in electronics engineering technology 1 year of serving experience 2 years troubleshooting 1 year of repairing electronics
submitted by Inner_Mistake_3568 to hatemyjob [link] [comments]


2024.05.15 12:50 Cold-Journalist-2850 Need help for Raspberry pi 4 trace find

Need help for Raspberry pi 4 trace find
Hi,i've got raspberry pi 8gb rev 1.4 version.as picture A.unfortunately when repairing pmic chip,it's 5th pad is ripped off from board.it is insdise in the pcb.so i gave it to repairman and he said the scraching is risky beacuse if scrach too much it will be damage to layers of pcb..since the only option is retrace the path.pmic MXL-7704 p4 5th pad is damaged. As the pictures photo A (rev 1.4) it's inside on the pcb.However on( rev 1.2 )Photo B have 5th pin's trace on the board.what i need is,if anyone has raspberry pi board like photo B,please give me endpoints of the 5th pin.there is a block diagram for this board.but,it's not full schametic diagram versionwise.i will attach the picture clearly identify the difference of the boards. Tip:Multimerter's continuity mode is enough for the task.
submitted by Cold-Journalist-2850 to AskElectronics [link] [comments]


2024.05.15 09:20 calvin1719 [Unknown refrigerant][Blue Star 2wae181yd] Causes of high power draw?

Hello
I have a 1.5 TR window AC, that's non-inverter, and connected to a voltage stabilizer. The unit is rated for 230V/50Hz/single phase and 1875W (line voltage in my part of the world is 220-240V). Recently I've had a problem with the AC, in that no matter what I set the target temperature to, it cuts off around 28c.
Unfortunately, the company itself has incompetent service and there's a dearth of technicians here who a. know what they're doing and b. aren't trying to rip off people.
Does anyone have any educated guesses as to what the cause might be for this issue? Unfortunately the unit is about a decade old and I don't have most of the info on it. I can't find anything on the model number on the net, like its data sheet or detailed specs, except for this https://www.gadgetsnow.com/ac/Blue-Star-2WAE181YD-Window-AC-15-Ton-2-Star-Rating-White
If it helps, this is the wiring diagram fixed on the unit https://ibb.co/3zFxsMX
To clarify, I'm not going to DIY this - I just need to know the general direction this might be and lessen the chances of being ripped off by whoever I call to look at this. Thanks.
submitted by calvin1719 to hvacadvice [link] [comments]


2024.05.15 05:01 bcocfbhp Rebooking King and Queen of the Ring

Here we go!
Only Note is the Draft Doesn't happen on Raw or Smackdown It's a Peacock Special
Raw April 29
First Round Matchs
Jey Uso beats Finn Balor - 16 mins
Gunther beats Pete Dunne - 18 Mins,
Lyra Valakrie beats Natalya - 13 Mins
Kairi Sane beats Shayna Bazler - 17 Mins
Nxt April 30
First Round Match
Wes Lee beats Tony D'Angelo. - 11 Mins
Joe Coffey beats Andre Chase
Thea Hail defeats Tatum Paxley
Fallon Henry defeats Lash Legend
Smackdown May 3
First Round Matches
Montez Ford beats Johnny Gargano
Carmelo Hayes beats Shinskue Nakamura
Nia Jax defeats Tegan Nox
Piper Nevin Defeats Candace LaRae
Raw May 6
First Round Matches
Ilja Dragonuv defeats Ricochet
Tyler Bate defeats Rey Myestrio
Iyo Sky defeats Zoey Stark
Alba Fyre defeats Dakota Kai (Big Upset that leads to Damage Control vs Becky, Lyra, Alba and Isla feud)
NXT May 7
Shawn Spears defeats Ridge Holland
Lexis King defeats Josh Briggs
Gigi Dollin defeats Izzi Dame
Lola Vice defeats Arianna Grace
Smackdown May 10
AJ Styles defeats Randy Orton
Tama Tonga defeats LA Knight
Tiffany Stratton defeats Naomi
Blair Davenport defeats Indi Hartwell
Raw May 13
Tyler Bate defeats Illja Dragnov (Imperium interferes)
Gunther defeats Jey Uso
Kairi Sane defeats Lyra Valkarie
Alba Fyre defeats Io Sky
NXT May 14
Lexis King defeats Shawn Spears
Wes Lee defeats Joe Coffey
Gigi Dollin defeats Lola Vice
Thea Hail defeats Fallon Henry
Smackdown May 17
Carmelo Hayes defeats Montez Ford
AJ Styles defeats Tama Tonga
Tiffany Stratton defeats Blair Davenport
Nia Jax defeats Piper Niven
Raw May 20
Gunther defeats Tyler Bate
Kairi Sane defeats Alba Fyre
NXT May 21
Wes Lee defeats Lexis King
Thea Hail defeats Gigi Dollin
Smackdown May 24
AJ Styles defeats Carmelo Hayes
Tiffany Stattron defeats Nia Jax
King and Queen of The Ring
Tiffany Stratton defeats Kairi Sane and Thea Hail
Wes Lee defeats Gunther and AJ Styles (Dragonuv attacks Gunther mid match)
submitted by bcocfbhp to fantasybooking [link] [comments]


2024.05.15 04:02 menow399 Should I get a second opinion about my repairs?

Hey everyone! Quick question regarding accident repair. https://imgur.com/a/zfWPQH6
Event: My VW Passat (blue rectangle in crappy diagram) was hit by a Nissan Titan (gray rectangle in crappy diagram) recently. I was going about 10 on a protected turn, after having been stopped at the red light. The other driver went through a red light going about 30 mph, and my car was spun around backwards in the lane I was turning into.
Situation: I just got my car back from the shop, and it feels like there is a drift where there was not before. I have to keep pressure on the wheel otherwise I will end up in the wrong lane after only a few seconds (picture 3). I called the shop and they said my alignment passed their tests, and the issue is my struts.
Question: I have 58.1k miles on this car, I drive it almost exclusively on the freeway, and I am a fairly cautious driver who almost never has passengers nor anything heavy (besides myself lol). Is it likely that I'm dealing with a bent frame / alignment issue that the shop didn't properly / doesn't want to deal with? Should I take this in for a second opinion?
Thanks everyone!
submitted by menow399 to askcarguys [link] [comments]


2024.05.15 03:17 BB_Captain Where do I get replacement seals for this briggs and stratton carburetor?

Where do I get replacement seals for this briggs and stratton carburetor?
Im trying to learn about small engine repair as a new hobby, so today I picked up a free troy bilt 21" mower with a briggs and stratton 190 cc engine on it. Somewhere along the line the previous owner lost the air filter cover and the air filter, but just kept right on using the lawn mower without them for who knows how long. So as one would expect, the carburetor was a filthy mess inside and out. I took it off and apart and cleaned it, but the original black seal/gasket and the o-ring seal for the bowl are toast.
So where does one go to get these parts? Do smaller local hardware stores, Lowes, or home depot carry these types of parts or is this some stuff I'm probably going to have to order off the internet? If it is something I have to order can you more experienced repair people point me in the direction of where to get the parts?
Thank you in advance!
submitted by BB_Captain to smallenginerepair [link] [comments]


2024.05.14 23:24 Evening-Night-8421 Edger Engine Fix or Replace

I have a MTD edger with a Briggs and Stratton engine 91212-1319 3.5hp looks like late 90s era possibly. Looking for a fix, sputtering oil out of crankshaft/crankcase while running any tips? Or direct replacement?
submitted by Evening-Night-8421 to smallengines [link] [comments]


2024.05.14 12:25 TajMonjardo Considering a Kubota zero turn

Homeowner considering a 54" zero turn. Wondering if I should get one with a Briggs and Stratton, Kawasaki or Kohler engine. I have about two acres of lawn, I think 54" will be large enough? I'm looking at their entry level machines, I would appreciate any advice. Also curious if the hydraulic seat is a must? Any advice is greatly appreciated.
submitted by TajMonjardo to kubota [link] [comments]


2024.05.14 04:28 turbo133t Engine Power Loss and Gas Tank Pressure Increased

I have an Ariens 46-inch Hydro Tractor (model number 936053) circa 2011. It is powered by a Briggs and Stratton engine. When mowing this weekend, I began losing power on hills--specifically on the downward slope where the front was pointed down. After noticing, I would brake and slow the decent and that helped for a while. But after more use, I began losing power in other hills and eventually on level ground. When it would lose power, the RPM would drop and it sounded as if it were bogged down. One time, it completely shut down and I had to restart the engine and mower. Stopping the tractor forward motion or mower deck would sometimes help and the engine would come back up to speed.
I parked the tractor and lifted the hood. I found that the plastic gas tank was bulging so I slowly opened the gas cap to relieve pressure.
I assume these things are related, since I've not experienced either before. Does anyone have any thoughts on what the problem is? What should I be looking for and inspecting to fix this?
submitted by turbo133t to smallengines [link] [comments]


2024.05.13 23:53 archer505 Is this engine junk?

I got a Toro Recycler 22” with a 190cc Briggs & Stratton for free off a coworker. He didn’t maintain it very well. The mower has a knock when cutting through thick grass, and the oil looks pretty glittery. Is this enough to know the engine is junk or is it worth looking into?
submitted by archer505 to smallengines [link] [comments]


2024.05.13 23:26 Neat_Accident_7245 Briggs and Stratton mowers

Are the Briggs and Stratton engines in JD and Troy Bilt mowers comparable/the same? I'm having a hard time rationalizing the cost of a JD vs a Troy Bilt if their guts are pretty much the same... Also, I know nothing, obviously, but I'm sure you smart people will give me the scoop. Am I paying more for a green mower for a good reason, or would the cheaper red be just fine. Have about an acre of flat country lawn to cut.
submitted by Neat_Accident_7245 to smallengines [link] [comments]


2024.05.13 18:24 More-Director6189 Engine Not starting

I own a riding mower with a 12hp Briggs and Stratton. A day ago it was running fine but today when I went to start it turned over and nothing happened. I checked the spark and it was good and the fuel line was supplying petrol to the carb after that I checked the air filter and it was good too. After this it tried to run for a few seconds but never got going and puffed a tiny little bit of smoke out the intake when it stopped. Have recently had the valves checked and they were good not sure where to go now it had fresh fuel put in a couple days ago too.
submitted by More-Director6189 to lawnmowers [link] [comments]


2024.05.13 16:56 Slight-Yesterday-556 idk if gt lines are allowed but i’m very grateful for my car

idk if gt lines are allowed but i’m very grateful for my car
got it last april + the note i got at my first oil change because of how i take care of the inside/ outside
submitted by Slight-Yesterday-556 to ForteGT [link] [comments]


2024.05.13 14:52 curlypaul924 Fit a quiet or low-tone muffler onto an engine that isn't designed for one

First, please avoid telling me that it's not worth fitting a muffler onto this engine -- I already know that. And I know that a lot of the noise comes from all the moving parts. But sometimes the journey is more important than the destination.
I have a push mower with Briggs & Stratton engine 09P602-0137-F1 (single cylinder, OHV). The standard muffler for this mower is 590565:
https://preview.redd.it/c4x4sojxt60d1.png?width=1280&format=png&auto=webp&s=188ac1e1d18d223957eb481b9fca23b1ea34b746
The muffler is held on by two screws spaced about 3.25" apart. The exhaust port on the head is not threaded.
I have not found a quieter muffler (or any muffler, for that matter) that would be a direct fit, so I'm looking for ideas to fit something different (toying with different mufflers on a small engine is a lot cheaper than an automobile engine!).
The first thought I had was to drill and tap threads for the existing exhaust port, which would give me a lot of options, but to do it right I would have to remove the cylinder head to clean out any metal shavings.
The simplest solution I have come up with is to fit a 3/4" L-bracket on to the existing mount points onto something like this: https://www.jackssmallengines.com/jacks-parts-lookup/part/briggs-stratton/496892
https://preview.redd.it/yowqh5bdw60d1.png?width=300&format=png&auto=webp&s=10266dbb1ae032318971fb8fa71abdae0bfb99d7
but I'm not sure how sturdy that would be under vibration. It would probably be better to fabricate a custom plate, but that's a lot of work.
Any other ideas (even crazy ones) that I haven't thought of?
submitted by curlypaul924 to smallengines [link] [comments]


2024.05.13 13:00 Dobe1342 Motor working to hard?

Hey guys just bought a Briggs and Stratton 6.75ft/lbs 190cc 2550psi 2.3gpm pressure washer. Pump was bad and I bought one off of Amazon that is max 3200 psi 2.5gpm.
I know that it’s recommended for 6.5-7hp but it seems to work on mine just fine and doesn’t stall it.
My only question is even if it doesn’t stall it I’m pretty sure it’s working itself pretty hard to the point where I feel like it’ll get too hot. I like the pressure a lot and would rather not turn it down but I’m not sure if it will damage my motor in the long run.
Any of you had this experience in the past or recommend if I should be turning it down a bit?
submitted by Dobe1342 to pressurewashing [link] [comments]


2024.05.13 02:04 ZanyDroid Finally found a UL9540 DC ESS - SimpliPHI 6.6

Every couple of months I do another round of Googling to see what the progress is on UL9540 Edition 3. I finally found a 48V DC ESS. Haven't had a chance yet to look through the manuals / listing certificate, I don't believe they are up yet on the SimpliPhi site.
(Hot off the press - less than 2 weeks old)
The SimpliPHI 6.6 battery is UL 1642, UL 1973, UN 3480 and UN DOT 38.3 certified and has gone through UL 9540A fire safety testing. It recently secured its UL 9540 Edition 3 certification as a standalone DC ESS. It is compatible with the SimpliPHI 6-kW hybrid inverter, Sol-Ark 8K, 12K and 15K inverters, as well as other leading lithium supporting inverters
https://www.solar-electric.com/lib/wind-sun/SimpliPHI_BAS_ES_BS1451_6-6_Battery_Spec.pdf
For some background on why I think this is important -- DC ESS is supposed to allow it to be used with inverters that weren't explicitly listed with it, as long as the installation instructions are compatible.
It's still early days of DC ESS, so I'm hoping there are some people willing to get the experience and report back.
submitted by ZanyDroid to SolarDIY [link] [comments]


http://activeproperty.pl/