Hi, iam a fpga beginner.
I play with an i2c bus. The fpga is the slave. A raspberry pi the master.
The reading from the sda line works fine(the led for start and stop light up).
If i try to do Tri state by uncomment the line, it stop working.
assign sda = pull_sda_low ? 1'b0 : 1'bz;
or even
assign sda = 1'bz;
What do i wrong? FPGA is a tang nano9K with the oss-cad-suite

`default_nettype none module top ( input wire clk, output wire [5:0] led, inout sda, inout scl ); reg [5:0] led_reg = 0; assign led = ~led_reg; reg stop_bit; reg start_bit; reg pull_sda_low = 0; //assign sda = pull_sda_low ? 1'b0 : 1'bz; //assign sda = 1'bz; // start bit always @(negedge scl) begin if(sda == 0) begin led_reg[0] = 1; start_bit = 1; end end // stop bit always @(posedge sda) begin if(scl == 1) begin led_reg[2] = 1; stop_bit = 1; end end endmodule 

Is there a simple way to bounce separately different outputs of single track. For example, I have a drum machine track, and I want to bounce each drum separately. Any suggestions on how I should go about doing that?

Hey all,
The summer semester just started and I was working on my ACCT209 first week course load. All started out well. I did all the interactive videos, took notes, did well on the questions after, and did exceptionally well on the homework. When it came to take the end of module quiz, I studied heavily right before. But when I got into the timed quiz, my mind just drew a blank. I ended up making a 55 on the quiz, which is very discouraging because I haven’t failed a test since grade school. I noticed that usually I can formulate the numbers, but have trouble knowing what exactly to place in the tables. I have a friend who just graduated with a Masters in Finance who will be tutoring me some, but I was wondering if anyone that has been through this class could give me some advice? I rewatched the interactive videos multiple times but it’s like my mind cannot correlate their table with the tables in our assignments. I’m extremely discouraged at the moment and any advice or encouragement would be much appreciated. Thanks :)

Probably a tall order, but does anybody have a signal splitter schematic to split a signal from one into to two outputs?
It will require a phase switch and preferably a balance control. Bonus of the balance isn't a dual pot.
I'm thinking of using a fet buffer up front fed into a phase inverter.
Phase inverter feeds two output buffers where one of the buffers can select better the in or out of phase leg of the phase inverter.
I would use a transformer except cost and the idea here is to feed inputs one and two on the same amplifier so no ground isolation concerns.
I haven't figured out how to incorporate a balance control. I could just put a volume on each buffer which might make sense if i end up giving the input buffer a bit of gain but adds to part count.
Thoughts? What am i missing?
Update - duh - balance control is easily done with a simple linear pot with each output signal being fed to one of the outer legs and the center lug to ground. Will need to have a series resistor in the event that both signals are in phase.

Hello everyone, I play cod mw3 with mouse and keyboard, in the game with a ping button you can mark Location and enemies which I have assigned to Q, I want to know if there is any way with which I can assign the pressing of mouse key 1 and 2 as input to get output of Q button, is there any application/software that can help me with this. Also as we shoot gun with mouse, right click is aim and left is fire, so I have to continuously press these keys but not want to get continuous Q output, only need the output at start of pressing both buttons. Thankyou

I had a Physics professor in college who always said the same thing about climate change:
"The things we need to do to fix it are things that we should be doing, for other reasons."
Climate change has become a partisan issue; not "politicized," as that would imply that the divide is between the left and right, when in fact it is between Democrats and Republicans... both of which are right-wing parties. In other words, this is a contrived debate. As long as the argument is about whether climate change is happening or not, they never have to have the debate about how to fix it, and their fossil-fuel-peddling donors will keep getting rich.
Instead, one party denies the problem, while the other party insists on policies that do not fix the problem. In case you haven't heard, electric vehicles and solar and wind power are nonsense; non-solutions that cost a lot of money without hurting the fossil fuel industry.
So, what are the solutions?

1. Nuclear power - Contrary to what politicians and the media would have you believe, nuclear power is the best energy source in terms of safety, cost, and environmentalism. While the handful of accidents have been sensational, all of them together have killed fewer people than coal power kills in California every year, just from normal operation; the waste issue was solved by reprocessing back in the 1970s, and only kept alive as an issue by a regulatory ban on the technology (no other country even considers this an issue); and since the costs of nuclear are almost entirely up-front, but they run for 60+ years, no other energy source comes close to the cost efficiency of nuclear power.
   
2. GMO crops - I honestly have a hard time even figuring out what the anti-GMO movement is complaining about. Intellectual Property, to be sure, but that is a much broader concern than just with GMO crops, and there are tens of thousands of public IP GMO strains developed by state universities, with more being developed all the time. This also addresses the "monoculture" concern; I never heard anyone say that a given GMO crop was the end-all, be-all replacement for every other strain of that crop, just the best we can do right now. The simple fact is the GMOs are better tailored for their environments such that they require less input (water, fertilizer, pesticide, fuel to transport them, etc) for the same output.
   
3. Recombinant fuels - The main problem with EVs is that they are resource intensive throughout their life cycle, and require a complete rebuilding of infrastructure, not just the power grid to supply enough electricity to keep them all charged, but entirely new repair facilities (which your local mechanic cannot afford). Grabbing Carbon Dioxide out of the air and combining it with water to produce fuel is relatively straightforward chemistry, it just takes energy to do it... which can be had from the waste heat of advanced nuclear reactors. This lets us keep our existing infrastructure intact, while closing the Carbon cycle. This can also produce the other compounds normally acquired from petroleum to produce pharmaceuticals, lubricants, plastic, etc.
   

Note that none of these solutions address climate change, exclusively; cheaper electricity makes our industry more competitive, cheaper crops drive down the cost of living, and not being dependent upon petroleum for vital resources frees us from dangerous foreign entanglements.
These are things that we should be doing, for other reasons.

In the past enterprise development model, scale determined the business volume, and the same is true for contact centers as an industry that is both technology-intensive and labor-intensive. However, in today's economic downturn, the marginal returns of traditional business scale are diminishing, and "saving expenditures and increasing efficiency" is being regarded by more and more enterprises as the first choice for survival and development.
For this reason, contact centers have shown a stronger need for cost-saving and efficiency improvement, and lean management of efficiency and cost has become particularly important. In particular, the human resource structure that relies on manual agents needs to be optimized urgently.
Among them, there are the contradictions between low human resource utilization and the continuously expanding business capacity, as well as factors such as uneven customer service levels and difficulty in stably outputting high-quality speech skills.
In addition, the slow response speed of manual agents, low efficiency in handling customer complaints, weak customer access channels and scenarios, single service strategy, and simple functions have all become multiple obstacles that restrict the service efficiency of the contact center.
In response to this change in the industry, contact centers are gradually focusing on the balance between operational efficiency and customer experience.
Nowadays, enterprises hope to improve the efficiency and production capacity of contact centers by introducing new technologies, that is, without reducing efficiency, they can maximize manpower savings, reduce overall operating costs, and simultaneously improve customer service experience.
​
Take the financial industry as an example. Compared with the previous "racing for land" and "increasing scale", this year there is more emphasis on "saving money" on human resources.
​
According to Cloopen Zhongfei, the 4,000+ voice robots provided by Cloopen Contact Center AICC for a financial institution can complete the workload of 6,000 human agents, including notifications, reminders and other services with relatively fixed processes and speech techniques. All can be completed efficiently through intelligent voice robots, thereby achieving significant savings in labor costs.
​
For another example, for the onboarding of new employees, with the help of intelligent auxiliary functions such as "Speech Map" and "Gold Medal Speech" of Cloopen Cloud Contact Center AICC, complex knowledge points are sorted into real-time speech recommendation that can be used for dialogue with customers. Employees can start working after passing basic training, further reducing costs and increasing efficiency for the company.

"The Rank Math SEO with AI Best SEO Tools plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘id’ parameter in versions up to, and including, 1.0.218 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page." -Wordfence
https://www.wordfence.com/threat-intel/vulnerabilities/wordpress-plugins/seo-by-rank-math/rank-math-seo-with-ai-best-seo-tools-10218-authenticated-contributor-stored-cross-site-scripting#:~:text=The%20Rank%20Math%20SEO%20with,input%20sanitization%20and%20output%20escaping.

Hey folks,
I'm starting to take my first steps with Proxmox, and I've hit a roadblock that I'm not sure how to handle. I've researched this topic a bit, but can't really understand what I should do.
In my host (Proxmox VE) I have installed acme.sh (ACME Shell script) to generate certificates for my private domain that I use in my homelab (some endpoints have external access through Cloudflare). I'm doing this in the host because I'll need to share the certificates with multiple LXCs, and this way I only have to generate one wildcard certificate, and not multiple (per LXC that needs them).
Now I'm setting up an LXC for Docker, so that I can run some containerized applications, such as Traefik, to use as a reverse proxy for all my local services. My goal is to share the certificates on the host with the LXC, and then from the LXC to the Traefik Docker container.
I've figured how to share them:

• From the host to the LXC: Bind mount points
  • mp0: /opt/acme.sh/example.com_ecc,mp=/etc/ssl/example.com,ro=1
• From the LXC to the Traefik Docker Container: Bind mounts
  • --mount type=bind,source=/etc/ssl/example.com/fullchain.cer,target=/etc/ssl/certs/example.com.pem,readonly
  • --mount type=bind,source=/etc/ssl/example.com/example.com.key,target=/etc/ssl/private/example.com.pem,readonly

Then, the Traefik configuration has something like this:
yml tls: certificates: - certFile: /etc/ssl/certs/example.com.pem keyFile: /etc/ssl/private/example.com.pem options: default: minVersion: VersionTLS12 sniStrict: true
But this is what I get when I look at the container logs:
ERR error="open /etc/ssl/private/example.com.pem: permission denied" filename=tls.yml providerName=file
The strange thing to me is that using the terminal, I can do this:
pct enter 101 docker exec -it traefik sh cat /etc/ssl/example.com/example.com.key
And I get the output, the root user inside the Traefik Docker container and read the file contents, but the traefik process cannot. What am I missing?

With default anki you can't have multiple {{type: ...}} fields. I know it's possible using an extension, but you can't use extensions on AnkiDroid. Is this possible on mobile.

Max Sanity Points (SP) = Intelligence Stat + Wisdom Stat + Charisma Stat = Total Max SP
Temporary SP functions like Temporary HP
(E.g, 10 Int + 18 Wisdom + 12 Charisma = 40 SP)
100%-89% SP = No effects
80%-69% SP = +3 Passive Perception, The Character is alert and nervous acting jumpy.
60%-59% SP = Disadvantage on resisting and breaking the Frightened effect
50%-49% SP = Short term madness effect
40-39% SP = Long term madness effect
30-29% SP = Frightened until Long term madness effects have been removed or wear off.
20-9% SP = Indefinite Madness effect
8%-1% SP = Insanity Effect
0% = Death
SP is reduced by certain magical spells, auras or seeing something that would be considered disturbing e.g, looking at a dead body, Looking at a demon, ect.
SP is brought back to full after a long rest unless specified that it is not by (e.g) a magical effect.
(See “Madness” in DMG for removal of madness effects)
Calm Emotions (+) When casted on a creature that has not yet been afflicted with a madness effect they regain all lost SP, if they have been afflicted with a madness effect only 2d6 SP is regained
Lesser Restoration (+) While removing short term and long madness the targeted creature regains half of their Max SP with any additional SP over max is regained as Temporary SP
Lobotomisation (7th Level abjuration)
You grasp a creatures mind and violently contort their mind, reducing their Intelligence or wisdom or charisma by 1d4 and remove Insanity effects.
Greater Restoration (+) While removing short term and long and indefinite madness effect the targeted creature regains all lost SP with and gain a Temporary SP equal to Half their maximum.
Insanity
Insane effects are completely permanent unless Lobotomisation is casted onto the effected creature. They also gain a flaw from the Indefinite Madness table that takes the duration of the effect.
(d100) Effect 01-20 The character must succeed a DC20 Wisdom or Intelligence or Charisma saving throw or loose 5 SP and become Paralysed for that action. The effect does not end even when taking damage.
21-30 The character cannot stop babbling or whispering even when resting. Spellcasting requires a DC15 Concentration check and have disadvantage on all Charisma ability checks.
31-40 The character gains a crippling fear of 3 creature types, when viewing a image or hearing the name of the creature spoken the character screams in fear and covers their ears/eyes to block out the source. Encountering a creature of those three types it causes the character to be Frightened and must spend their entire action moving away while loosing 5 SP for every turn they can still see the creature.
41-50. The character becomes erratic and must succeed a DC25 Wisdom save or they will attack themselves, this can be stopped by being grappled or being restrained.
51-60 The character sees extremely vivid hallucinations of their worst fears or traumatic experiences from their past and must succeed a DC20 Wisdom saving or come under the effects of Phantasmal Killer and Blindness/Deafness for their full duration
61-70 The character takes 2d4 bludgeoning damage every minuet spent not unconscious as they punch themselves aggressively without their input
71-80 The character spends their action to intentionally kill the closest person to them until they take damage themselves
81-90 The character’s Max HP is reduced by half and must succeed a DC25 Constitution check when they become frightened or are surprised as their heart palpitates, on a failure they collapse prone and all movement is reduced to 0 as they take 15d10 damage
91-100 The character cannot rest.

Can I use a standard 5 Pin relay, such as a DaierTek one to toggle negative instead of positive? I need to put a positive input into the relay from a switch, but have it output negative since my switch only has a positive toggle and can't toggle the negative side, the negative side is always connected. If this won't work, what other options is there? I remember seeing that I can do this with a relay but I can't find it now.

Hey there,
I am currently working on a new fantasy book and wanted to ask you to give me a bit of ideas for this system. The main part of it is supposed to be food and drink orientated. I want this system to be mostly grounded in real life, so no magical food (a bit like in mistborn where the metals are real metals, except for the very special ones) Here's the stuff i already have (feel free to change them up a bit to):

• Humans weren't born with Magic, at least most, they have to use an Input and an Output for using mana
  
• Humans who do posses the ability to take in Mana still need an output though, to use this magic outward (meaning not for mind manipulation or something like that)
  
• Depending on what you eat and drink, your ability to take in mana (in both parties) can get better or worse. Some foods and drinks even have special propertys leading you to being more profound in some abilitys
  
• If used to much and to much "bad" food has been eaten, Mana can from into "Tar" which chlogs up the veins and prevents blood flow, which can kill you
  

If you have any ideas, aspecialy for Worldbulidng maybe, i'd love to hear them!

Hi All! I'm on an early stage entrepreneurial course for start ups. I'm conducting a quick Sport Market research and would love your input! Would you mind sparing less than 1 minute to fill out my 5 multiple choice survey questions please? Your feedback would be incredibly valuable and greatly appreciated! Thank you so much in advance for your help. It is completely anonymous too!
https://www.surveymonkey.com/2LWSNKM

Greetings, Do-Gooder think tank, please help me before I die from overwhelm! I am the Founder of a little organization with big dreams to deeply support the post-partum experience. We've been around for a several years, at different levels of activity. Post-covid crazy times, I am all in with helping foster social connections for families. I have attracted people to support the mission who seem to want a whole lot of hand-holding and being nurtured, themselves, with a bit less energy than I'd like for enthusiastically growing the org to serve others. We have newly instated a goal, but it has been a real challenge to inspire the "give/get" expectations ($1500 annually) of the board. So, I am in a growth cycle to rebuild the board from scratch. I am trying to see this as an opportunity to reset the culture if that is possible. I want people to fulfill their 2-year commitments (4 out of 5 haven't and the 5th is gearing up for an early departure, too), show up when they say (a major player dropped out the day of the strategic plan, another didn't make it to a volunteer celebration as the #1) , and can put more into the organization than they take away withe personal drama. I realize that people need love and nurturing and it may sound like I don't have tolerance for basic human limitations, and may be part of the problem, but I think that I am good at being kind and supportive It feels like I need to attract more established "board-types" than the usual of other moms who simply see the need for more nurturing. They natually seem to need a lot of training about expectations for a board of directors, and it almost feels like there is resentment that they aren't getting a cut of the fundraising. I know that it will take a good bit of time to pay me a decent salary, and to be able to get solid structure behind me, but this stage has also been met with some resistance to paying me at all, which is so disheartening (I suggested $25/hr could be aspirational, short term, but with that measure, with what I have been throwing my way on occasion (yes this is WAY too loose of a system.. our latest Treasurer stole a company laptop on her way out), I am still volunteering at least 2/3s of my time, and although volunteering is part of the culture, sustainability in pay seems key to solve for to grow into the Big Dream). I am curious to know of others' experience with attracting and retaining a good board for better momentum, and also navigating the early stages of getting paid as a Founding Director. I am the defacto volunteer coordinator, director, chair, and program coordinator. I would definitely like to share some of these hats with others. Another question is if you have experience with others wearing multiple hats as stipended 1099 workers and also sitting on the board. Thanks for any input on working with humans and getting more efficient in the process.

Thanks for the great content here. Helpful and energizing. I'm stuck towards the very end of a project, now willing to seek external help if you're willing to teach.
Scope: dashboard that focuses on JOBS and their related CONSTRUCTION_ORDERS. Some JOBS have multiple CONSTRUCTION_ORDERS, others have just one. The CONSTRUCTION_ORDERS have a STATUS. Right now, in a table viz, the JOB will show as many rows as there are CONSTRUCTION_ORDERS, because each CONSTRUCTION_ORDER has different data. All good. All JOBS are listed in the same viz.
Goal: Needing to filter out the JOBS when all related CONSTRUCTION_ORDERs have a STATUS of COMPLETED. If any related CONSTRUCTION_ORDER has a different status than COMPLETED, I need to show all (even the JOB record(s) with completed CONSTRUCTION_ORDERs; think monitoring partial completion). So only when all related CONSTRUCTION_ORDERS are in COMPLETED status, would the JOB fall off.
What I've attempted: calculated column, TRUE/FALSE (all related orders are completed) with my bunk DAX, with the idea of creating a measure to filter from? I've attempted what feels more complex with counting total ORDERS per job and then count orders per job <> COMPLETED, with some return statements that didn't work....
Other Details: Though I have some other relationships, all the values mentioned above come from the same table called JOB_WO_TABLE.....with, maybe (?) an exception = the STATUS mentioned above is a numerical value in the JOB_WO_TABLE, and I'm using a translate_table to show the relative translations. I'm flexible on when and how that translation takes place, if it helps reach my goal logic.
Am I going after it wrong with the thought of a calculated column? Is there a better way entirely to pull this off? I've gotten resource errors during various attempts, though it's not a crippling amount of data (~5000 records), and I blame those errors on bad expressions, not necessarily machine limitations.

Im M28 and my partner is F27. We’ve been living together for 5 plus years now in an apartment. Recently, I think she gaslighted me - it’s a sunday, I woke up late as I streamed and played a game late the night before.
She woke me up as she cooked eggs and as I was eating, she already finished eating then told me to get up and get the clothes outside. Im fine with it initially as I asked her if I can just finish my eating then I’ll do that. To my shock, she said it cant wait and it’ll be quick. I was asking her if she was joking and as she was leaving to the room she said she wasn’t and closed the door.
I stood up, stopped eating, and followed her to the room asking if she really was joking because I’m still eating and she said she wasn’t. She knows this would frustrate me and I was disappointed and frustrated already I told her why it cant wait as Im still eating, I was asking her what’s with the rush and stuff but she just ignored me and opened her laptop to watch netflix. She ignored me and I was really frustrated. I stopped eating completely, got the hanging clothes outside (which is shaded by the way), I even hanged the newly washed clothes from the washing machine and washed the dishes as well.
We are ignoring each other for about a week now. I still do my normal routing including my solo walks every afternoon and lately it’s been giving me clarity and a moment to think if this relationship is worth it. Of course, this is not the first instance that this happened and recently I just got laid off from my work and it’s too much stress for me to handle. She knows that it takes a lot for me to get through my family problems, recent career problems, Im also not getting younger and the future worries me as I still can’t buy a house or be financially stable to provide for my future family. There are also other instances where she knows it will get me mad and frustrated so she does it or says it. There are also instances where she told me something but when I confirm it with her, she denies it when I really remember that she said it. Another instance which might seem like a little basic is when she gets cold water from the fridge and she returns the glass of water empty or only halfed - I told her to always refill it so we can drink cold water since we dont have a water dispenser and only relies on putting water in the fridge to make it cold. Whenever I ask her why the bottle is empty or halfed, she always denies its her and it’s obviously just the two of us in our apartment.
Another example is she has been asking me if she can loan money from me to buy an ipad but I told her I don’t have much savings and Im planning to go abroad so we have to save as much as we can as were both not from wealthy families, she also has a laptop and an android tablet and whenever I ask her what she will use it for she says just for watching movies and it’s apple - she keeps on repeating this and I always ask her why she can’t but it herself as we’re both working but then she always says she’s just joking but then when she constantly repeats it. I also referred her to my work (which I recently got laid off) even though she has no tech background and she got the job. I thought this could help her buy her mac/ipad. Recently, she bought a macbook thru her colleague’s credit card (she would pay her coworker for 2 months) - she could use this for both work and watching netflix.
I’m not perfect but I keep on telling her I just need peace of mind and for us not to fight and I can continue to fight life and get my stuff together but she is not helping. I have been also waiting for her to initiate and apologize but she appears to be okay even singing (We stay in one room). It’s like she does that care.
Since I’m working from home, I recently tried to work in cafes to get a different environment and think more and she has not sent me a single message to apologize or anything. Her work is only a 3 minute walk from our apartment.
NSFW: Don’t know if this helps but our sexual relationship is pretty normal I think, we have sex like twice or thrice a week (more frequent maybe 3 times or more a week when she’s safe) and just 2 weeks ago she was safe and we just had sex and she says it’s amazing but most of the time I finish before her (about 15 minutes or less I think - she has a nice body I really can’t help it). Last month she also opened up about wanting a sex toy (dildo) and I bought her that and she asks me if I like it when she uses it when we’re making love and I say yeah. Our most recent sex, she made me go outside the room for a couple of minutes then when I went inside she was using the dildo and I made her orgasm with the dildo while licking her clit. Then we do the usual sex without the toy. I noticed however that she denies having orgasm from the toy when I literally see it then she wants the toy removed and she wants my d inserted the.
Update:

• Awhile ago while working in a cafe, my gf surprisingly found me and sat down in my table. She was asking if there was a plug for her laptop but I was busy working and we've been ignoring each other for days so I wanted to keep it that way so that she knows that I'm not okay. With me ignoring her, she transferred to a different table. After a few minutes, I left because I was going to spend time with my little brother and mom for a bit because they need a ride and I also want someone to talk to and I want to catch up with them since they're in the city.
• I'm trying to initiate to talk to her about the issue - I just got home and my gf was at the kitchen facing away. She tried to enter the room but left immediately. I'm trying to find a timing to talk to her and initiate and I don't know how. It feels like I've gotten too comfortable just not talking to her and minding my own. How do I go about this? Should I just walk out of the room and try to talk to her? It feels awkward.

Tldr: Is my partner gaslighting me? She doesn’t respect my time of eating and she also has been ignoring me and does not appear to care for the past week.
Thanks in advance for thoughts/inputs. Would like to apologize for any grammatical errors if any - Im kind of winging everything right now. Thank you!

I want to sync several things in this order, a Volca FM, to a Volca Drum, to a Uno Synth Pro to a Circuit Rhythm. The Circuit will be the "drum machine" and main feature, with everything else layered on top. Sequencing not as important, although I am a newbie and not sure. All I want to do is be able to live jam on top of the Circuit Rhythm, and have everything be on time if I so desire, for dawless, live improv gigs. I also have some guitar effects pedals I´d like to add somewhere, before going into a small mixer.
What is the best way to go about this, and what inputs and outputs and kinds of cables are best?