Craftsman tool bags
Craftsman Tools: Old and New
2018.04.06 16:42 UsernameSaysWhat Craftsman Tools: Old and New
Show off your Craftsman tools, old and new. Craftsman tool restoration and discussion. Pretty much anything to do with Craftsman branded power or hand tools.
2021.02.16 02:25 HB3Electric VetoProPac
A support group for addicts of the world’s greatest tool bags.
2013.12.11 03:43 IndieRobert Craftsman
Welcome to the Craftsman tools subreddit, where we talk about Craftsman tools (both power tools and hand tools), accessories, history, and the people who use them. ***If you're looking for the sub about the Craftsman app for Minecraft, you're in the wrong place!*** We are ***NOT*** affiliated with Stanley Black & Decker, nor the Craftsman Tools division.
2024.05.19 09:44 -notausername_ TSMR X - The X Factor
 | Tansio Mirai is a Chinese company that has quickly been building in notoriety over the last few years, and I would be surprised if you have not already heard of them. Their Sands and Lands iems in particular were very big sellers and quite highly regarded in their respective price range for high levels of detail. Will they continue to tread that path on their tenth anniversary edition iem? In a simple word, no. The "X" feels like a compilation of everything they have released and all that they have learned. I'll explain how further shortly. submitted by -notausername_ to headphones [link] [comments] The unboxing is a great experience and includes a very nice braided cable, some ear tips, a cleaning tool, case and a tool to change the tuning switches. Tuning switches you say? That will be part of the explanation I mentioned above so please dear reader, don't give up on me so soon ;). The iems themselves are a very nice 3d printed variety, with a beautiful aquamarine type colour that really looks fantastic in the sunlight. They are a hybrid type iem, containing 2 dynamic drivers, + 4BA + 1 Custom Film Retarding Driver. From the manufacturer: Low frequency: 2 x 8mm strong magnet dynamic, hollow coaxial structure, Carbon mixed diaphragm Mid frequency: 2 x Knowles balanced armature High frequency: 2 x Sonion balanced armature Full frequency effect: 1 x custom film retarding driver The custom film retarding driver seems similar to the tech in u12t and the like, not sure if this is considered a "driver" persay, but I am not here to get hung up on semantics. There are three tuning switches as well (123), the default being 020. I spent most of my time hovering between 020 and 003. I can without a doubt say that unlike other iems I have tried with tuning switches, these are legitimately not a gimmick and have a very audible effect on the sound. In a sense it makes them sound like three totally different iems. 100 is extremely bassy, causing bleed into the mids. If you are a supreme basshead this may be your bag. For me, it was far too much and caused a loss of upper detail that is important to me. 020 on the other hand is a w shape style, causing the mids to recess very slightly yet still sound full bodied, and brings the bass down enough to bring out the treble nicely. 003 still has loads of bass but brings the mids forward and brings out much more of the high end detail, without ever getting sibilant. I feel like this was personally my favorite setting, though as always ymmv! This is where I feel Tansio Mirai have really changed their game! Previously known for treble filled iems with gobs of detail, this is a comparably different path for them, yet with the tuning switches you still get the option to get a more detailed, analytical style. Win win for all really! I recommend tip rolling with these, since they have short nozzles I needed a longer tip to really do them justice and get the seal I was looking for. Once I did however, WOW. This leads me to my next section and the one you have probably been patiently waiting for, the sound! First let's start off with what I think is the best part of these, the bass. It is visceral, raw, but also textured and well presented. It does not bleed into the mids or cause these to be a warm iem. The best way I can describe these is a baby IER-Z1R, and considering the price difference, that is probably one of the biggest compliments I can bestow! Seriously, the bass presentation here is fantastic. It is bass you feel deeply, and it is deep with loads of impact. Easily the best I have heard in this price range. The mids are slightly recessed, though mostly in the lower mids. I would say this is done perfectly for my tastes. The mids have loads of detail and sound equally good with male and female vocal ranges. Upper mids have a lot of energy but never getting peaky, shouty or sibilant. Percussion sounds fantastic, guitars have lots of crunch, vocals soar and are never placed too far back. The treble is great, well extended with lots of detail while rolling off at the top to avoid any sibilance or sharpness. Micro detail is present, without being too in your face. They have an airy presentation that leaves lots of room to pick out individual sounds, however I would not consider them analytical at all. Imaging is average for the price. The soundstage is decently wide, however it is taller and deeper than usual in this price giving a pretty 3d or holographic effect uncommon at this price. If you can't tell, I think this is a fantastic IEM, and at the price I think it is an absolute steal. Even at the regular price of 699 usd this would be a competitive IEM. 5/5 |
2024.05.19 09:39 -notausername_ TSMR X - The X Factor
 | Tansio Mirai is a Chinese company that has quickly been building in notoriety over the last few years, and I would be surprised if you have not already heard of them. Their Sands and Lands iems in particular were very big sellers and quite highly regarded in their respective price range for high levels of detail. Will they continue to tread that path on their tenth anniversary edition iem? In a simple word, no. The "X" feels like a compilation of everything they have released and all that they have learned. I'll explain how further shortly. submitted by -notausername_ to iems [link] [comments] The unboxing is a great experience and includes a very nice braided cable, some ear tips, a cleaning tool, case and a tool to change the tuning switches. Tuning switches you say? That will be part of the explanation I mentioned above so please dear reader, don't give up on me so soon ;). The iems themselves are a very nice 3d printed variety, with a beautiful aquamarine type colour that really looks fantastic in the sunlight. They are a hybrid type iem, containing 2 dynamic drivers, + 4BA + 1 Custom Film Retarding Driver. From the manufacturer: Low frequency: 2 x 8mm strong magnet dynamic, hollow coaxial structure, Carbon mixed diaphragm Mid frequency: 2 x Knowles balanced armature High frequency: 2 x Sonion balanced armature Full frequency effect: 1 x custom film retarding driver The custom film retarding driver seems similar to the tech in u12t and the like, not sure if this is considered a "driver" persay, but I am not here to get hung up on semantics. There are three tuning switches as well (123), the default being 020. I spent most of my time hovering between 020 and 003. I can without a doubt say that unlike other iems I have tried with tuning switches, these are legitimately not a gimmick and have a very audible effect on the sound. In a sense it makes them sound like three totally different iems. 100 is extremely bassy, causing bleed into the mids. If you are a supreme basshead this may be your bag. For me, it was far too much and caused a loss of upper detail that is important to me. 020 on the other hand is a w shape style, causing the mids to recess very slightly yet still sound full bodied, and brings the bass down enough to bring out the treble nicely. 003 still has loads of bass but brings the mids forward and brings out much more of the high end detail, without ever getting sibilant. I feel like this was personally my favorite setting, though as always ymmv! This is where I feel Tansio Mirai have really changed their game! Previously known for treble filled iems with gobs of detail, this is a comparably different path for them, yet with the tuning switches you still get the option to get a more detailed, analytical style. Win win for all really! I recommend tip rolling with these, since they have short nozzles I needed a longer tip to really do them justice and get the seal I was looking for. Once I did however, WOW. This leads me to my next section and the one you have probably been patiently waiting for, the sound! First let's start off with what I think is the best part of these, the bass. It is visceral, raw, but also textured and well presented. It does not bleed into the mids or cause these to be a warm iem. The best way I can describe these is a baby IER-Z1R, and considering the price difference, that is probably one of the biggest compliments I can bestow! Seriously, the bass presentation here is fantastic. It is bass you feel deeply, and it is deep with loads of impact. Easily the best I have heard in this price range. The mids are slightly recessed, though mostly in the lower mids. I would say this is done perfectly for my tastes. The mids have loads of detail and sound equally good with male and female vocal ranges. Upper mids have a lot of energy but never getting peaky, shouty or sibilant. Percussion sounds fantastic, guitars have lots of crunch, vocals soar and are never placed too far back. The treble is great, well extended with lots of detail while rolling off at the top to avoid any sibilance or sharpness. Micro detail is present, without being too in your face. They have an airy presentation that leaves lots of room to pick out individual sounds, however I would not consider them analytical at all. Imaging is average for the price. The soundstage is decently wide, however it is taller and deeper than usual in this price giving a pretty 3d or holographic effect uncommon at this price. If you can't tell, I think this is a fantastic IEM, and at the price I think it is an absolute steal. Even at the regular price of 699 usd this would be a competitive IEM. 5/5 |
2024.05.19 09:38 lowpricedeal Low Price Deals: How to Extend the Lifespan of Your Budget Vacuum Cleaner: Maintenance Tips
 | Introduction: submitted by lowpricedeal to u/lowpricedeal [link] [comments] Given that budget vacuum cleaners from Family Bargains are a smart choice for many families whose main priority is cleanliness while not being niggardly, investing in one from Low Price Deals is a smart financial decision. Yet, just like any other appliance, being adequately maintained is the key factor in ensuring its durability and output efficiency. Through proper implementation of maintenance guidelines, it becomes quite possible to make your vacuum cleaner last longer, which, in turn, will bring the costs down. https://preview.redd.it/lvuxub707c1d1.jpg?width=600&format=pjpg&auto=webp&s=5f5a2f1bda35144e635f859fbae884a57bfa90fa Regular cleaning of filters and brushes: Regular cleaning of filters and brushes: On the other hand, among the very crucial duties for you to perform towards your budget vacuum cleaner is to clean its filter and brushes periodically. Over time, the filtration system's inner parts get clogged with dust, dirt, and debris; that's why air flow doesn't flow freely and the suction force is lower. The type of vacuum cleaner you own determines whether you should wash out the water in filters that are made of washable material or replace the ones made of disposable filtration materials. An alternative is checking the rollers and brushes frequently and clearing them if you notice anything, like hair, in them that might clog them. Emptying the dustbin: Another important maintenance is that you will need to get rid of the dustbin or the bag often. The vacuum gets overloaded and its efficiency decreases, while at the same time, it may cause the development of a bad smell, which otherwise may worsen the infections. Instead, dump the trash can filled with trash as soon as you use it or when it gets full. Further, the bin should be given a good wash to wipe out any remaining food pieces and dirt buildup. Checking for blockages: Obstructions in the vacuum cleaner's hose, wand, or other features can create congestion and compel a reduction in airflow that indirectly affects performance. Develop an inspection routine to detect the hindrances and extract them instantly. Sometimes a simple visual check can pick out debris, but you also may have to use a straightened wire coat hanger or similar tools to remove the blockages in your drain. Inspecting Power Cords and Hoses: Inspecting Power Cords and Hoses: The power cord and the hoses are the weak sides of the car wash hoists. When they are constantly bent or twisted while the hoist is in use, this makes them prone to wear and tear. It’s good to periodically check these elements for any signs of damage, like fraying debris or cracks. If you notice damage, it is necessary to get replacements. Don't pull the cord or yank it across corners; that will stress the cord and may cause it to weaken in the future. Cleaning the exterior: Maintaining a clean outer part of a vacuum cleaner involves using mild washing-up liquid to remove dust and grime, avoiding hard chemicals that may damage finishes. This not only enhances the vacuum's appearance but also reduces dirt transmission to previously cleaned surfaces. Store Properly: Complementary with proper storage, it is possible to further extend the lifespan of your pocket-share candidate. One should ensure the vacuum is kept in a dry, climate-controlled, and harmless place away from direct light and moisture to extend its life span for many years. This should not be kept outdoors because it can be exposed to extreme temperatures or stolen. Storing it in areas where there is a knocking hazard or where it is getting damaged. https://preview.redd.it/2mnd98527c1d1.jpg?width=400&format=pjpg&auto=webp&s=82adde377c69b99aba898e99283091925e7ed3d5 Regular Maintenance Schedule: One of the ways to avoid the repair hassle is to establish a regular maintenance schedule for your budget vacuum cleaner. Designate time to do a deep and comprehensive check-up and the cleaning of all parts, including where there might be any repairs or replacements every few cycles. Maintenance is another aspect that will prolong the lifespan of your vacuum cleaner as well as make sure it still maximizes performance. Conclusion: In order not to let keeping your budget vacuum cleaner from low-priced deals be upsetting, here are some easy things you can do. Through the implementation of these easy upkeep methods into your routine, you can prolong the durability of your appliance and keep the appearance of the house appealing. If you maintain it properly and care for it, your budget vacuum cleaner will continue to serve you like this for many years at a similar level of performance without emptying the bank. |
2024.05.19 09:31 Electronic-Load8898 Weapons I would like to see in naoe's arsenal
2024.05.19 08:57 charlie_boo Pro tip for avid DIYers - buy a box of half pencils!
 | I got a couple of boxes of half pencils for the garage a couple of years ago. They are a life saver when doing DIY projects. Chuck a few in your tool bag/caddy as you start a job. They’re only around £5-6 a box. submitted by charlie_boo to DIYUK [link] [comments] |
2024.05.19 08:51 ConsequenceSure3063 Best Carabiner Knife
 | submitted by ConsequenceSure3063 to u/ConsequenceSure3063 [link] [comments] https://preview.redd.it/fdkgupcmyb1d1.jpg?width=720&format=pjpg&auto=webp&s=ef3947eb1912429220207278e961594a0642880f Welcome to our Carabiner Knife roundup! Whether you're an outdoor enthusiast, a survivalist, or simply someone who appreciates a well-crafted tool, we've got you covered. In this article, we'll be taking a closer look at some of the top carabiner knives on the market. From versatile multi-tools to sleek, lightweight designs, we've curated a selection of products that are perfect for any adventure. So sit back, relax, and get ready to discover the best carabiner knives out there! The Top 13 Best Carabiner Knife
Reviews🔗Essential Outdoor Gerber Armbar Scout Pocket Clip Knifehttps://preview.redd.it/kqw4jfnmyb1d1.jpg?width=720&format=pjpg&auto=webp&s=ac1f19e0cf496f6a1283d2100ffef7d74235d89a As an outdoor enthusiast, I've been on the lookout for a reliable and compact tool to carry on my adventures. I chose the Gerber Armbar Scout multi-tool for its promise of versatility and compactness. I was pleasantly surprised by the tool's sleek design, which conveniently fit into the pocket of my backpack. One of the first features I noticed was the stainless steel construction, giving the tool a sturdy feel while keeping it lightweight. One of my favorite aspects of the Gerber Armbar Scout was its ability to open various packages with minimal effort. The can/package opener was a lifesaver during a camping trip when I needed a quick snack. The 2 1/2'' plain edge blade proved to be sturdy, allowing me to make precise cuts with ease. However, I did encounter some difficulties with the locking mechanism of the blade, which required a certain level of force to engage. While this wasn't a dealbreaker, it did cause a little bit of frustration during use. In conclusion, the Gerber Armbar Scout multi-tool serves its purpose as an essential companion for outdoor enthusiasts. Its small size and versatility were impressive, but I did encounter minor annoyances with the locking mechanism. Overall, I would recommend this tool to anyone looking for a compact and reliable multi-tool to take on their next adventure. 🔗Ultimate Emergency Slim Pocket Knifehttps://preview.redd.it/gpkbke1nyb1d1.jpg?width=720&format=pjpg&auto=webp&s=e199e58ae71262c188260a8a345f7c02982fce07 As an emergency situation arises, every moment counts. That's when the CRKT Exitool comes in handy, offering a fast and reliable solution for cutting seat belts and breaking windows. The slim profile makes it easy to conceal, while the textured grip ensures a firm hold. In my own experience, the Exitool has been a lifesaver, with the glass-reinforced handle providing durability and the safety cone tip cover protecting the window breaker while stowed. The only downside? . The compactness might make it a bit challenging for those with larger hands to use. Overall, the Exitool is a reliable and versatile emergency tool that helps you stay prepared for any unexpected situation. 🔗Gerber Pledge Knife: High-Quality Emergency Cutting Toolhttps://preview.redd.it/hif5giinyb1d1.jpg?width=720&format=pjpg&auto=webp&s=74bf93d396fca0e79ec922f48a65446e4a9a7498 I recently had the opportunity to try out the Gerber Crisis Hook Knife, and I must say, it's a lifesaver in emergency situations. This sleek and durable tool is designed specifically for quickly and safely cutting through seat belts, clothes, and even heavy straps or cords. Its lightweight design and smooth operation make it a game-changer when time is of the essence. One of the most notable features of this knife is its integrated oxygen tank wrench, which adds extra versatility and functionality in life-saving situations. The glass breaker pommel included in the package also comes in handy when encountering obstacles that may hinder your ability to assist someone in need. While the Crisis Hook Knife has several impressive features, it's not without its drawbacks. The friction lock sheath can be tricky to attach to certain surfaces, and the clip may not be as convenient as advertised. Additionally, the knife's handle, while comfortable and easy to grip, could benefit from a more secure attachment to a tactical belt. In conclusion, the Gerber Crisis Hook Knife is an invaluable tool for first responders and anyone who needs to quickly and safely cut through various materials in emergency situations. Its lightweight design, versatility, and straightforward operation make it a must-have in your arsenal. Just be prepared to address some minor issues, such as the friction lock sheath and the clip's functionality. 🔗Al Mar Stinger Keychain Knife for Self-Defensehttps://preview.redd.it/nahmifunyb1d1.jpg?width=720&format=pjpg&auto=webp&s=86acc36d0c88d927f0399439b7e160c9bb8d4172 I recently tried out the Al Mar K1001BKG Stinger Keyring Knife in Green. The first thing that caught my attention was the compactness of the knife. With it being such a small size, it's incredibly easy to discreetly attach it to my keychain while still remaining convenient to access whenever it's needed. The TPR overmolded grip proves to be an excellent feature, providing a non-slip hold, even while my hands are sweaty or in wet conditions. The dual-injected PP sheath adds an extra layer of protection, making it suitable for everyday use without worrying about damaging the blade. The blade itself has an impressively sharp edge, allowing me to open letters and boxes with ease, yet also offers a sturdy protection for instances of self-defense. Being an advocate for quality tools, I found the Stinger to deliver that expected performance from the reputed AL MAR brand. However, I noticed that for harder tasks, the blade feels somewhat delicate. One would have to handle it carefully or opt for a more robust knife for such situations, potentially compromising the ultralight key ring knife design. Despite this, overall this knife performs well, and its convenient size and efficient design make it a must-have for those who value versatility and efficiency in a concealed blade on their keychain. 🔗8-in-1 Multi-Functional Carabiner Knife for Outdoor Activitieshttps://preview.redd.it/olocg5aoyb1d1.jpg?width=720&format=pjpg&auto=webp&s=3a65054b883be0c86543d02809eafc56eab63c03 Using an HMMS Stainless Climbing Carabiner in my daily life has been quite an experience. This multi-functional tool has proven to be extremely versatile, from its use as a knife to its handy LED light. The knife is sharp and easy to flip out, making it an essential part of my survival gear. The LED light is a lifesaver when the power goes out, and the Phillips and regular screwdriver heads are a great addition for those quick fixes on the go. The glass breaker is also convenient, though I haven't had to use it yet. One thing that stood out is the carabiner's simple and lightweight design, making it the perfect keychain or hanging tool for my camping trips and other outdoor adventures. Despite its compact size, the carabiner is surprisingly strong and easy to use, with the locking mechanism providing a secure fit. Overall, the HMMS Stainless Climbing Carabiner is an excellent addition to any survival kit, and I highly recommend giving it a try. 🔗Multi-Purpose Carabiner Knife Toolhttps://preview.redd.it/nuu683koyb1d1.jpg?width=720&format=pjpg&auto=webp&s=41480f81113890fc79d8cf5a91df38a752e0c7a2 I recently had the pleasure of trying out Brouk & Co's Multi-function Carabiner Tool, and let me tell you, it's the ultimate handyman's companion! . This tiny titan is super portable, fitting perfectly in my backpack for those unexpected situations on the go. With an impressive array of features, I found myself reaching for this bad boy more times than I ever thought possible. Its sturdy design has held up beautifully through various camping trips and household projects. While its size is convenient, it's not always the easiest to maneuver with larger hands, but overall, this carabiner tool offers exceptional utility and convenience. Whether you're an avid outdoor enthusiast or just someone in need of a versatile tool for daily life, the Brouk & Co Multi-function Carabiner Tool is the perfect fit. 🔗Durable Multi-Purpose Carabiner Knife for Everyday Survival and Outdoor Adventureshttps://preview.redd.it/h30ubgtoyb1d1.jpg?width=720&format=pjpg&auto=webp&s=f935ac96b73bdae1601c8b9b779db2c2347e0b89 As someone who loves being prepared for any situation, I was thrilled to try out the Sheffield Wilco 4-in-1 Carabiner Multi-Tool. The anodized black aluminum carabiner is both lightweight and versatile, making it perfect for everyday carry. The convenience of foldable flat-head and Phillips screwdrivers, along with a sturdy 3-inch serrated blade, ensures that I can tackle tough jobs with ease. While I appreciate the strength provided by the 420 stainless steel attachments, I did notice that the carabiner isn't suitable for weight support, and it is best to use it more for its attachments. However, considering the multiple functionalities it offers, this small drawback seems like a fair trade. Overall, the Sheffield Wilco 4-in-1 Carabiner Multi-Tool is a reliable and efficient tool that has become an essential part of my daily life. 🔗Versatile Carabiner Knife with Stainless Steel Bladeshttps://preview.redd.it/shmwro6pyb1d1.jpg?width=720&format=pjpg&auto=webp&s=24b2f235811faab265e25c7fb6e1521235d6d985 As a seasoned outdoor enthusiast, I recently got my hands on the Dakine Hook Knife and let me tell you, it exceeded my expectations! This hook knife is designed for easy accessibility and it certainly lives up to its promise. It can be attached to your harness at any point for a quick and convenient deployment, making it a must-have tool for those seeking adventure and the great outdoors. One of the main features that stood out to me was its dual stainless steel cutting blades that effortlessly sliced through even the toughest cut lines. The anodized aluminum handle not only adds a sleek touch, but it also provides a comfortable grip that makes it a breeze to use. Additionally, the included sheath for easy harness attachment is an added bonus, guaranteeing the safe carrying of this versatile tool. While I was impressed by the performance and convenience of the Dakine Hook Knife, I did notice a downside: oxidation. After just six months of use, the aluminum handle started to display signs of oxidation. Of course, this won't affect the functionality, but it does make me wonder whether a more durable material like titanium or carbon fiber might be a better long-term choice. Despite this minor issue, the Dakine Hook Knife has become a trusted companion on my various outdoor excursions. Its user-friendly design and powerful functionality have really made a difference in my adventures, whether I'm camping or trekking. For anyone in need of an easy-to-carry hook knife that gets the job done, I would highly recommend giving the Dakine Hook Knife a try. 🔗Carabiner Knife Multi-Tool with Locking Blade and Glass Breakerhttps://preview.redd.it/pryyo7ipyb1d1.jpg?width=720&format=pjpg&auto=webp&s=a4730a2b8a093aa6ad0d6a241a041367976f047c I recently got my hands on the Dark Energy Carabiner Pro 5-in-1 Multi Tool, and let me tell you, it's been a game-changer for my outdoor adventures. With its all-metal design, it's sturdy enough to hold up to some serious wear and tear. The quick-snap blade is both smart and safe, and it feels really nice in your hands. I love having the convenience of two screwdrivers, a bottle opener, a knife, and even a window breaker all in one little package. Plus, the integrated carabiner makes it effortless to attach to my backpack or belt. Overall, the Dark Energy Carabiner Pro has been my go-to tool for every camping and hiking excursion. Highly recommend! . 🔗Rugged Slim Cut Multi-Tool with Easy-Access Bladehttps://preview.redd.it/n96ugxxpyb1d1.jpg?width=720&format=pjpg&auto=webp&s=ba1741d05b433d300f405d90e3e5e01d7e0c2556 When I received the Armbar Slim Cut Multi-Tool, I was excited to try out its features. Its sturdy design caught my attention, and the burnt orange color added a pop to its sleek appearance. This is a multi-tool designed for the adventurous, and it didn't disappoint. Let's talk about the scissors, one of the prominent features of this tool. It worked effortlessly for cutting various materials, from fabric to paper. The plain edge blade was also impressive, easily piercing through tough materials. Despite its size, it's surprisingly powerful and perfect for cutting tasks on the go. The tool's design, with large tool tabs and access points, was user-friendly. It allowed me to switch between the scissors and the blade without any fumbling. The bottle opener was a convenient addition, adding versatility to the tool. However, it wasn't all smooth sailing. The scissor's spring mechanism felt a bit flimsy, and I had to be careful while using it to avoid any accidents. Also, the blade's deployment could be smoother for a more natural and comfortable use. Overall, the Armbar Slim Cut Multi-Tool is a robust and versatile everyday carry tool. It's perfect for those who need a reliable, lightweight, and multifunctional item for various tasks. Despite a few drawbacks, I'm confident that this will be a valuable addition to many people's toolboxes. 🔗8-in-1 Carabiner Multitool with Stainless Steel Blade and EDC Featureshttps://preview.redd.it/14mhb8hqyb1d1.jpg?width=720&format=pjpg&auto=webp&s=15c3daa01b69fe09b64c9bc0fe7d8003b042526a The Carabiner Keychain Multitool is an 8-in-1 lifesaver that's perfect for outdoor enthusiasts. Its sleek design makes it easy to carry around, and its durability ensures it will withstand even the toughest conditions. The sharp stainless steel blade is perfect for a variety of tasks, while the aluminum hand holder provides a sturdy grip. The multi-functional design includes a hanging carabiner, Phillips screwdriver, slotted screwdriver, bottle opener, and more, making it a versatile addition to any EDC (Everyday Carry) setup. Despite its robust build, the Carabiner Keychain Multitool is surprisingly lightweight, making it a great choice for everyday carry. However, it's essential to remind others to exercise caution while using the sharp blade. Overall, this compact, versatile tool is a must-have for anyone seeking survival gear or everyday convenience. 🔗Polymorph Carabiner Multifunction Knife with Titanium Finishhttps://preview.redd.it/hcunm9rqyb1d1.jpg?width=720&format=pjpg&auto=webp&s=e5917d0f3445ce17fe753e7ee55d8787c9d9716b The Civivi Polymorph carabiner multitool has become a handy companion in my outdoor adventures. The anodized titanium body is quite durable and serves as a perfect casing for its versatile features. The carabiner clip is a fantastic addition, allowing me to attach the tool to my backpack or gear, keeping it close at hand when needed. One of the most useful aspects is the 9Cr18MoV scalpel blade, which makes this multitool an excellent option for opening bottles or cutting through some rope. However, the hex bit driver lacked enough leverage for me to fully appreciate it during my camping trips. The choice between the plain titanium and bronzed titanium finish adds a personal touch to the overall design, making it a stylish and practical accessory for any outdoor enthusiast. While the Civivi Polymorph has its pros and cons, I find it a valuable addition to my outdoor gear lineup. 🔗Portable 8-in-1 Multi-Tool with Key Ringhttps://preview.redd.it/nuijt92ryb1d1.jpg?width=720&format=pjpg&auto=webp&s=10b0d2ee30d342e1beadfc2edfa19192fd654b49 The Cabela's Silver Pocket Tool was an unexpected pocket companion in my daily life. It was a great multitasker that never failed to provide convenience on-the-go, and its anodized aluminum handle always gave me a sense of sturdy stability. I found myself using it more than I expected, especially the knife, file, and flat-head screwdriver. While the larger tools were great to have, the smaller ones sometimes felt a little lacking. The screwdriver and corkscrew had considerable wiggle room, which made me hesitant to use them on heavy-duty tasks. But in all honesty, for a tool of this versatility and portability, it wasn't too surprising to come across these slight disadvantages. The Cabela's Silver Pocket Tool, in all its multi-tasking glory, did become a handy accessory to keep in my bag or backpack. I never regretted having it by my side during unexpected camping trips or when I needed to open a stubborn lid. But it's a device that's best suited for those who appreciate its versatility over precision. Honestly, it's great to have such a multi-tasker with you, but it's not without its drawbacks. It's a case of compromises, as it seems. With the Cabela's Silver Pocket Tool, you're sacrificing a bit of precision for that all-important portability factor. Is it worth it? That depends on your own priorities. But for those who need a tool that can do a little bit of everything in a pinch, this is indeed the handy gadget you've been hunting for. So, all in all, the Cabela's 8-In-1 Pocket Tool might just be a perfect fit for your next adventure. But remember, it's not without its imperfections. It all comes down to balancing your needs and understanding its limitations. Buyer's GuideA carabiner knife is a versatile tool designed for outdoor enthusiasts and survivalists. This type of knife combines the functionality of a carabiner and a knife, making it an essential addition to anyone's gear arsenal. In this buyer's guide, we will discuss the essential features, considerations, and general advice to help you choose the best carabiner knife for your needs.Important FeaturesConstructionhttps://preview.redd.it/zf7hgdpryb1d1.jpg?width=720&format=pjpg&auto=webp&s=34e37a817f68e984799716378e2f09a2fd1fbd04 One of the most important factors to consider when choosing a carabiner knife is its construction. Look for one made from high-quality materials such as stainless steel or titanium, which are durable and resistant to corrosion. DesignThe design of the carabiner knife plays a crucial role in its functionality. A well-designed knife should be lightweight yet sturdy. It should have a secure and comfortable grip, and the blade should be easy to deploy and securely lock into place. Consider the size of the carabiner, as well, to ensure it can accommodate your needs.Blade TypeCarabiner knives typically come with a variety of blade types, such as a hunting or skinning blade, a utility or general-purpose blade, or a multipurpose blade. Choose the type that best suits your intended usage of the knife.FeaturesOther features to consider include a lanyard attachment for easy storage and portability. Some carabiner knives also come with additional tools, such as bottle openers or screwdrivers, which can come in handy during outdoor adventures. https://preview.redd.it/ayrxi14syb1d1.jpg?width=720&format=pjpg&auto=webp&s=87178a5f5a84e5b80f6a37114dd5bb452741b964 MaintenanceChoose a carabiner knife that is easy to clean and maintain. Stainless steel and titanium are great choices due to their resistance to rust and corrosion. Regular maintenance helps ensure the knife stays in good condition for longer usage.ConsiderationsUsageDetermine the specific usage of the carabiner knife, and choose one that is designed to meet those needs. Consider the blade type, size, and features, and choose a knife that suits your intended purpose.Budgethttps://preview.redd.it/udxdi5nsyb1d1.jpg?width=720&format=pjpg&auto=webp&s=4d5d0ea66f61e9a8ce274eb511aac43beca50701 Consider your budget when purchasing a carabiner knife. High-quality knives made from durable materials tend to be more expensive. Determine what you can afford, but also consider the potential long-term savings by choosing a high-quality knife that will last for years. Customer ReviewsBefore making a purchase, read customer reviews to gain insight into the performance and reliability of a carabiner knife. Look for feedback on factors such as blade sharpness, construction quality, and ease of use.General AdviceTest it OutBefore going on an outdoor trip, test your new carabiner knife to ensure it is functioning properly and is comfortable to use. This will give you peace of mind and confidence in your tool's performance. https://preview.redd.it/fjp0fztsyb1d1.jpg?width=720&format=pjpg&auto=webp&s=62ba65256f9f1e2dd079dbf6d20eff97af3853c8 Store it ProperlyProperly storing your carabiner knife is important to ensure its longevity. Keep it in a clean and dry environment, and securely attached to your gear to prevent it from getting dirty or damaged.Practice MaintenanceTo maintain your carabiner knife in good working condition, practice regular maintenance, such as cleaning and oiling the blade. This not only helps maintain the knife's functionality but also prolongs its lifespan.A carabiner knife is a versatile and essential tool for outdoor enthusiasts and survivalists. By considering essential features, taking into account your personal usage and budget, and reading customer reviews, you can choose the best carabiner knife for your needs. Remember to test it out, store it properly, and practice regular maintenance to keep it in great condition for years to come. FAQWhat is a Carabiner Knife?A Carabiner Knife is a versatile tool that combines a carabiner and a knife in a single device. It is designed for outdoor enthusiasts who need a reliable and convenient way to carry a knife and a carabiner while engaging in activities such as hiking, camping, and rock climbing.What are the benefits of using a Carabiner Knife?
How do I clean and maintain a Carabiner Knife?Cleaning and maintaining your Carabiner Knife is essential to ensure its longevity and performance. After every use, wash the blade and handle with warm soapy water. Dry the knife thoroughly before storing. To prevent rust, periodically apply a thin layer of oil or wax to the blade.Is there a difference between Carabiner Knives made of stainless steel and those made of other materials?Yes, there are differences between Carabiner Knives made of stainless steel and those made of other materials. Stainless steel blades tend to be more durable and resistant to corrosion, which makes them ideal for use in humid and wet environments. However, stainless steel knives may be heavier than those made of other materials like titanium or aluminum.What are some popular Carabiner Knife models on the market?Some popular Carabiner Knife models include the Spyderco Carabiner Knife, the Morakniv Garv Knife, and the Benchmade Bugout Knife. These knives are known for their durability, functionality, and ease of use.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.19 08:42 GuiltlessMaple Best Car Wash Brushes
 | submitted by GuiltlessMaple to u/GuiltlessMaple [link] [comments] https://preview.redd.it/6gr88fgxwb1d1.jpg?width=720&format=pjpg&auto=webp&s=f0bbadf42b26242381d553b2bd2e8ec7c49577f8 Welcome to our comprehensive guide on Car Wash Brushes! If you're looking to keep your vehicle sparkling clean, you've come to the right place. In this article, we'll discuss various types of car wash brushes, provide insights into which brushes are best suited for different surfaces, and offer tips on how to choose the perfect brush for your needs. So, dive in and discover the world of car washing accessories! The Top 12 Best Car Wash Brushes
Reviews🔗Car Wash Mop with Extendable Long Handle and Microfiber Headhttps://preview.redd.it/gabjhg6ywb1d1.jpg?width=720&format=pjpg&auto=webp&s=e77cd1411daa53baadc6695d02fefeedd40f81d0 I recently came across the Oyajia Car Cleaning Washing Mop Brush, and I must say, it's been a game-changer when it comes to keeping my car spotless. The adjustable handle allows me to reach all those tricky spots without having to twist and bend over, saving my back from any unnecessary strain. The chenille microfiber brush is not only soft but also extremely absorbent, making quick work of even the toughest stains. Plus, the fact that it can be easily disassembled into a mitt for interior cleaning is a definite bonus. However, one minor drawback is that the handle might be a tad too long for some users, making it a bit unwieldy to maneuver. Overall, this mop brush has made my car washing sessions faster, easier, and more enjoyable. 🔗Professionally Detailed Auto Wash Brush Sethttps://preview.redd.it/3atlofpywb1d1.jpg?width=720&format=pjpg&auto=webp&s=7a63a71eea9772517ab7f273c2f09aaa2c76adcf I recently got my hands on the OUTIMI 27pcs Car Detailing Brush Set, and it's been a game-changer for my weekly car cleaning routine. The kit comes with an incredible variety of brushes, from detailed bristles for intricate corners to heavy-duty scrubbers for stubborn grime. I also found the drill brush set to be particularly effective in tackling tough stains and reaching those hard-to-reach areas. The car air conditioner brush has been an unexpected hero in this set. It's made such a difference in cleaning out the vents and improving airflow. Plus, the car foam drill polishing pads have made my car look so shiny and new. The woolen polishing pad has been perfect for getting a smooth finish on my paintwork. However, there have been a few cons. Some of the smaller bristles tend to shed, which can be a bit annoying. Additionally, the storage bag could use some improvement - it's a bit flimsy and doesn't keep the brushes well-organized. Overall, I'm thrilled with the OUTIMI 27pcs Car Detailing Brush Set. It's made a noticeable difference in the appearance of my car, and I couldn't be happier. 🔗Ultra-Soft Ergonomic Detailing Brush Sethttps://preview.redd.it/b9zk6fzywb1d1.jpg?width=720&format=pjpg&auto=webp&s=bd3c56560da3a63fb635b48bb480aa173cf072b7 I recently stumbled upon the Detail Factory Ultra-Soft Detailing Brush Set Gray while searching for a solution to clean my car's intricate details without causing scratches. As a first-time user, I was pleasantly surprised by how comfortable it was to hold and use these brushes. The ergonomic design and balanced handle made it easy to clean for extended periods without experiencing any fatigue. The Ultra-Soft Detailing Brush Set truly lived up to its name, featuring ultra-soft synthetic bristles that gently cleaned my car's interior panels without causing any damage. Its metal-free construction gave me peace of mind knowing that the bristles wouldn't inadvertently scratch my vehicle's delicate surfaces. However, the only drawback I encountered was that the brush set comes with only one brush size, which might not be ideal for those who require more variety in their detailing tools. Despite this minor inconvenience, I wholeheartedly recommend the Detail Factory Ultra-Soft Detailing Brush Set Gray for anyone seeking a high-quality, gentle solution for maintaining their car's appearance. 🔗Car Wash Brush with Spray Foam and Rotating Designhttps://preview.redd.it/quprbgazwb1d1.jpg?width=720&format=pjpg&auto=webp&s=2be18a575f020a9af953d330ad21239c48f1adfc I recently got my hands on the versatile Atmomo Car Pressure Washer Rotating Wash Brush. This amazing tool made my car washing experience a breeze, saving me time and energy. What impressed me most was its automatic rotation feature that doesn’t require electricity. The water flowing into the pipe creates a high-pressure driving force to power the gears and make the brush work automatically. The Atmomo Car Pressure Washer isn't just your regular car wash brush. It also comes with a detergent box that sprays foam when you need it, making cleaning even easier. You can easily adjust the hydraulic pressure too, choosing from three levels according to your cleaning needs. Its rotating design with a soft and plump brush head ensures thorough cleaning while its excellent water-absorbing capacity protects the paint. This multi-functional tool isn't just limited to car washing. It can be used to clean floors, windows, blankets, and even serve as a garden water sprinkler. Its innovative technology has made car washing hassle-free and more enjoyable. However, one downside I noticed was the brush material. It tends to shed a bit during use, which might require some extra cleanup after washing your car. Despite this minor inconvenience, I consider the Atmomo Car Pressure Washer a valuable addition to my car care routine. 🔗Car Wheel Cleaning Brush Set with Tire Brushhttps://preview.redd.it/qke0xlszwb1d1.jpg?width=720&format=pjpg&auto=webp&s=59a60240bece2a23f67028e7d2376d96a4cc6160 As a car enthusiast, I'm always in search of the best tools to keep my ride in pristine condition. That's why I recently came across the NIKCOSMK Wheel Brush Kit, and I couldn't be happier with my purchase. This versatile kit has become an essential part of my weekly car wash routine. The Professional Wheel & Rim Clean Brush Set includes a variety of brushes perfect for tackling even the toughest grime on my wheels, tires, and rims. The soft microfiber wheel brushes are gentle on my painted, chrome, powder coated, and polished wheels, ensuring no scratches are left behind. One feature that stands out is the flexible design of the rim brush. Its ability to bend up to 360 degrees allows me to reach deep into tight spaces and thoroughly clean my wheels' faces and lips. Plus, the comfortable silicone hand grip ensures the brush never slips, even during a vigorous scrubbing session. The high-quality materials used in this kit are a testament to its durability and performance. The thick fibers of the synthetic woolie brushes hold tons of cleaning liquid and quickly remove grime from my wheels, while the metal-free construction keeps my car's paint safe from potential damage. Another aspect I appreciate about this kit is its wide range of applications. Whether I'm cleaning my car, truck, motorcycle, bicycle, or even my RV, boat, or lawn mowers, the NIKCOSMK Wheel Brush Kit has been an indispensable tool. Overall, the NIKCOSMK Wheel Brush Kit has made maintaining my car's spotless appearance effortless. Its unique combination of softness, flexibility, and performance makes it a reliable choice for car wash enthusiasts like me. 🔗Fitosy Complete Car Wash Brush Set for Detailinghttps://preview.redd.it/e0hdw330xb1d1.jpg?width=720&format=pjpg&auto=webp&s=705d54f6ae7f17c5eb719e4b798e13c9b027c8fb I recently decided to give my car a thorough cleaning and discovered the Fitosy Car Wheel Rim Tire Brush Set. I was pleasantly surprised by how well-made and versatile this kit was. The 15-inch flexible wool bristle brush stood out for me - it can bend in any direction and reach those hard-to-clean areas on the wheels. Plus, it's made of 100% metal-free materials, ensuring no scratches on my rims. Another feature I appreciated was the sturdy and ergonomic design of the handle. It's comfortable to grip and made of durable material, making it a reliable tool for long-term use. The three different sized detailing brushes also made light work of cleaning my car's interior, tackling tight spaces and nooks with ease. However, one drawback I experienced was that the tire brush, while effective in cleaning tires, seemed a bit too stiff for use on other sensitive surfaces like car carpets or leather seats. Despite that, overall, the Fitosy Car Wheel Rim Tire Brush Set has been a game-changer for me when it comes to car detailing, making the entire process much more efficient and enjoyable. 🔗Carcarez 4-Piece Long Handle Car Wash Mop Kit for Efficient Cleaninghttps://preview.redd.it/slqmz2s0xb1d1.jpg?width=720&format=pjpg&auto=webp&s=19d9184f1d41dc05dc21d30a49c0e4a0758b16c9 I recently got my hands on a Car Wash Brush Kit by Carcarez, and I must say, it has become an indispensable part of my car maintenance routine. The 45-inch aluminum alloy long handle provides excellent reach, making it easy to clean hard-to-reach areas of my vehicle. The kit is a 3-in-1 design, comprising a car wash mop, a replacement mop head, and a car wash squeegee. It's incredibly versatile, allowing me to tackle various car cleaning tasks efficiently. The car wash mop is made of a combination of PP and chenille microfiber, ensuring thorough cleaning without scratching my car's paint. The package includes two mops, offering extra convenience. The aluminum alloy long handle is not just sturdy, but also adjustable and swiveling, enabling me to achieve a 180-degree cleaning angle. This feature has proven to be a game changer, particularly when cleaning narrow spaces. The car drying squeegee is another notable component of the kit. It quickly and safely dries flat surfaces, whether it's glass or car paint. There's no risk of water spots either, as the squeegee leaves no marks behind. It's a handy tool that has drastically cut down the time I spend on drying my car. However, there are a couple of areas where the Carcarez Car Wash Brush Kit could improve. The mop heads, while effective, do tend to wear out relatively quickly. Additionally, although the aluminum alloy handle is strong, it can feel a bit unwieldy at times, especially for those who prefer a more lightweight design. Overall, the Carcarez Car Wash Brush Kit has been a valuable addition to my car cleaning routine. Its versatile design, long handle, and efficient cleaning tools make it a worthwhile investment for anyone seeking to keep their vehicle in pristine condition. 🔗Professional 26-Piece Car Cleaning Kithttps://preview.redd.it/uhr1za01xb1d1.jpg?width=720&format=pjpg&auto=webp&s=11920da47c305b1f90292c62f381bed31f2053d2 I've been using this car detailing kit for a few months now, and I must say, it's the ultimate car care package. From the tiniest nooks and crannies to the toughest stains on my wheels, this kit has made my car look as good as new. The drill brush attachments are particularly impressive. They've made it incredibly easy to give every corner of my car a thorough scrubbing, making sure no grime is left behind. The long handle wheel brush and tire brush have been a game-changer for reaching those hard-to-access spots on my rims and tires. The car detailing brush set is diverse, providing different sizes for various cleaning needs. The wire brushes have been particularly useful in tackling stubborn stains on the wheels. The soft car washing tool kit, with its detachable handle and water absorption cloth covers, has made windows and dashboards feel like brand new. However, it's worth noting that the bristles on some brushes may not be as soft as expected, so be gentle while using them. All in all, this 26-piece car cleaning kit is a must-have for any car enthusiast looking to maintain their ride in top condition. 🔗Comprehensive Car Cleaning Brush Sethttps://preview.redd.it/8fqyxde1xb1d1.jpg?width=720&format=pjpg&auto=webp&s=92d7c3b014e1c12d58660c9eeb454f8a6f749266 I recently discovered the MateAuto 12pcs Car Carpet Brush Set and it's been a game changer for keeping my car interior spotless. This set includes various brushes with different sizes and bristle materials, making it easy to clean every nook and cranny of my car. The Car Carpet Brush is particularly impressive, featuring super hard synthetic bristles that can effectively scrub away dirt and grime without causing any damage to my car rugs or floor mats. The ergonomic handle makes it comfortable to use, even for extended periods of time. I also appreciate the fact that this set includes a boar's hair brush set and a natural horsehair brush. These bristles are soft enough not to scratch the interior of my car, but strong enough to clean away dust and debris. I've found the boar's hair brushes especially helpful in reaching tight spaces like air vents and lug nuts. Additionally, the set includes air outlet brushes for quick cleaning of car vents and blinds, as well as stainless steel, brass, and nylon brushes for even more versatility. It's truly an all-in-one solution that covers many cleaning tasks, whether it be rust removal or delicate household appliances. Overall, the MateAuto 12pcs Car Carpet Brush Set has made maintaining my car's interior so much easier and more enjoyable. Its variety of brushes and applications make it a must-have tool for any car owner looking to keep their vehicle in pristine condition. 🔗Ultimate 62" Car Wash Mop and Brush Kithttps://preview.redd.it/mhg5u6w1xb1d1.jpg?width=720&format=pjpg&auto=webp&s=a56ea6bfb1f448a04f2999946afed9cb48fadce0 In my daily life, I've been using the HORDALOR Car Wash Kit to keep my car pristine. This kit includes everything you could need for a thorough car wash, even a 62" long-handle car wash brush to clean the hard-to-reach areas on your vehicle. The non-slip handle ensures a comfortable grip while you work, and won't scratch your paint job. One feature that stood out to me was the car wash kit's scratch-free design. The combination of the car bucket and grit trap keeps dirt off your car while washing, which prevents any scratches from developing during the cleaning process. Additionally, the car washing tools are made with premium materials that are gentle on delicate surfaces. However, the packaging could be improved. The Oxford bag is convenient and space-saving, but some users might find it difficult to access the tools when needed. Overall, I'm quite impressed with the HORDALOR Car Wash Kit and would recommend it to any car enthusiast looking for a comprehensive car cleaning solution. 🔗Premium 27-Piece Car Detailing Kithttps://preview.redd.it/1lfk4092xb1d1.jpg?width=720&format=pjpg&auto=webp&s=3d30bcd8d9c8f5ee400f0c0ca9d20c74f63448fc As a dedicated car enthusiast, I've had my fair share of cleaning tools over the years. However, the TTRCB 27pcs Car Detailing Kit has truly stood out among them. With its comprehensive set of brushes and accessories, it's like having a professional car wash right in my own garage. The kit comes with an impressive array of drill brushes, car detailing brushes, wire brushes, and other tools that cater to every cleaning need imaginable. From small cracks and corners to larger areas like wheels and engine compartments, this kit has got it all covered. The drill brushes are especially handy for giving the car's exterior a thorough wash, while the car detailing brushes are perfect for tackling smaller, more intricate areas inside the vehicle. The 3 different types of wire brushes are also a welcome addition to the kit, as they offer versatile cleaning options for various surface types. The air vent brush and car dash duster work wonders on removing dust from hard-to-reach areas, while the microfiber wash mitt ensures that your car stays spotless during the washing process. However, one thing to keep in mind is that the kit does not include the drill itself. Nevertheless, this minor inconvenience is easily overlooked when considering the overall quality and value that the TTRCB 27pcs Car Detailing Kit brings to the table. In conclusion, whether you're a professional detailer or a car enthusiast looking to give your vehicle a thorough clean, the TTRCB 27pcs Car Detailing Kit is definitely worth considering. Its extensive collection of brushes and accessories ensures that no corner is left untouched, resulting in a spotless and well-maintained car every time. 🔗Perform Tool Detailing Brush Set for Auto, Boat, and Homehttps://preview.redd.it/hfqmk7s2xb1d1.jpg?width=720&format=pjpg&auto=webp&s=14b3d9f4eee06ad80656e391e9f96fe648187829 I recently decided to give my old car a much-needed makeover and came across the Perform Tool W4992 Power Brush Detailing Kit. I was initially skeptical about its capabilities, but boy, was I in for a surprise! The kit included an array of tools such as power tool brushes, pads, towels, and various sized detailing brushes, making it easier for me to tackle every nook and cranny of my vehicle. The double-sided wash mitt, in particular, came in handy as it soaked up water quickly without scratching the paint. One of the standout features was how the 3 white soft bristle power tool brushes could easily be used with my drill or impact driver, making quick work of cleaning upholstery, leather, carpet, glass, tile, and fiberglass. The two orange medium firm pads were perfect for applying wax and polishes with extra precision. However, there were some minor drawbacks. Some of the detailing brushes felt a bit flimsy, and I had to be extra cautious while using them in tight spaces. Additionally, the lack of proper product specifications and user reviews made it difficult for me to understand the kit's compatibility with various power tools. Overall, the Perform Tool W4992 Power Brush Detailing Kit has been a game-changer in reviving my car's appearance. It offers a comprehensive set of tools to help you detail your vehicle, boat, or home effortlessly. But remember, always use caution when handling some of the smaller detailing brushes to ensure they last long. Buyer's GuideGetting a car wash can be an expensive and time-consuming process. To help maintain your vehicle's appearance and extend the life of its paint job, investing in quality car wash brushes is a practical and cost-effective solution. In this buyer's guide, we'll cover essential features, considerations, and general advice about car wash brushes to ensure you make an informed purchase. https://preview.redd.it/evgweq93xb1d1.jpg?width=720&format=pjpg&auto=webp&s=47a2fe197a739127843b66aafb9f3dd92f29d3fc Important Features to Consider
Considerations Before Purchasing
https://preview.redd.it/uko1aeo3xb1d1.jpg?width=720&format=pjpg&auto=webp&s=253de9d0972c01e2da938e9771d134438fff3d6d General Advice and Usage Tips
FAQhttps://preview.redd.it/d7khw744xb1d1.jpg?width=720&format=pjpg&auto=webp&s=e4bb3e504891ac633054459b6486e8217e774d7b 1. What are car wash brushes?Car wash brushes are specially designed tools used for cleaning and detailing vehicles. They come in various shapes and sizes, with features such as stiff or soft bristles, rotating heads, and ergonomic handles to suit different needs and types of surfaces.2. How do car wash brushes differ from regular brushes?Car wash brushes are specifically made for cleaning and maintaining vehicles. They may have stiffer or softer bristles, rotating heads, and ergonomic handles compared to regular brushes to provide a more thorough and efficient cleaning experience on automotive surfaces without causing damage. https://preview.redd.it/bg7wrlf4xb1d1.jpg?width=720&format=pjpg&auto=webp&s=4e7b7c2616e42ceeb49df59cec6bce86ec9c44d2 3. What types of car wash brushes are available in the market?There are several types of car wash brushes available, including:
4. Why should I use a car wash brush instead of a regular sponge or cloth?Car wash brushes offer a more thorough and efficient cleaning solution by providing better access to nooks and crannies, removing stubborn dirt and grime, and distributing cleaning solution evenly across the surface. This minimizes the risk of scratching and ensures a streak-free finish.5. How do I choose the right car wash brush for my needs?Consider the following factors when selecting a car wash brush:
6. How do I properly maintain and store my car wash brushes?To maintain and store your car wash brushes:
7. Can I use car wash brushes on other surfaces besides my vehicle?While car wash brushes are designed for automotive surfaces, they can also be used to clean other items such as patio furniture, boat hulls, and ATVs, provided that the brush is suitable for the material's surface.8. How often should I replace my car wash brushes?The frequency at which you should replace your car wash brushes depends on how often you use them and their condition. It is recommended to inspect the bristles periodically for signs of wear or damage – if the bristles become matted, frayed, or unevenly worn, it may be time to replace the brush.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.19 08:17 GhoulGriin Best Car Holsters
 | submitted by GhoulGriin to u/GhoulGriin [link] [comments] https://preview.redd.it/36va4pijsb1d1.jpg?width=720&format=pjpg&auto=webp&s=c8d71ac5f18d8fa29205f57088d4d5c238d07309 In today's fast-paced world, the need for easy and quick access to weapons has become essential. One such solution is the car holster - a fantastic accessory that keeps your gun within reach without compromising on safety. Whether you're a law enforcement officer or a gun enthusiast, our exclusive roundup of car holsters is designed to meet your unique needs and preferences, ensuring your weapon is secure and easily accessible when you need it most. The Top 7 Best Car Holsters
Reviews🔗Versatile Alien Gear Photon Holster for Hellcat Pistolhttps://preview.redd.it/ovxi45wjsb1d1.jpg?width=720&format=pjpg&auto=webp&s=5ff728f84ee6c97ad3b0e7f1408f8c825947ae5a The Alien Gear Photon Springfield Hellcat Holster in Black is a versatile, ambidextrous holster that caters to various use cases. Designed to fit almost any situation, this holster is a perfect fit for both outside and inside the waistband carry. Its optics cut makes it compatible with a wide range of optics, excluding the SRO. Being made in the USA and having a lifetime warranty, it gives shooters peace of mind knowing they're investing in a high-quality product. However, certain users have pointed out the bulky clip and claw configuration, which might require some practice and adjusting to prevent inconvenience. Despite these minor drawbacks, the Photon holster stands as a reliable, configurable choice for handgun enthusiasts in search of a modern yet practical holster solution. 🔗Durable RAM Gun Holster Holder for Secure Sidearm Storagehttps://preview.redd.it/3ykj6zdksb1d1.jpg?width=720&format=pjpg&auto=webp&s=ead5ac7cdf49f7ee91279943dd941440bd28ff62 I recently had the opportunity to test out the RAM Ram Gun Holster Holder. As a regular outdoor enthusiast, I'm always looking for ways to make my life easier and more comfortable when engaging in my favorite activities. This holster definitely fits the bill. The first thing that struck me about this holster was its durability. Made from marine grade aluminum with a powder coated finish, it's built to withstand even the harshest of conditions. And with stainless steel hardware, you know it's going to last. One of the most impressive features of this holster is its versatility. It can be mounted in multiple directions and positions, making it perfect for a variety of situations. Whether you're in a vehicle or on foot, this holster can accommodate your every need. However, there were a couple of drawbacks. Once you have your holster in place, it can be a bit tricky to adjust or remove. But, overall, the ease of use wasn't a deal-breaker. In conclusion, the RAM Ram Gun Holster Holder is a reliable and durable piece of equipment that is perfect for those who need their side arm within easy reach. Its versatility makes it ideal for a variety of outdoor activities, and its durable construction ensures that it will stand up to even the toughest of conditions. 🔗Adjustable Retention IWB Holster for Springfield Hellcat Red Dot Optic Cut, Blue Carbon Fiberhttps://preview.redd.it/tvb3xsnksb1d1.jpg?width=720&format=pjpg&auto=webp&s=d5bbd2a75a382b496e3136d461a891121b4edc3b As a Springfield Hellcat owner, I've been searching for the perfect IWB holster that can provide comfort and convenience while carrying my beloved firearm. When I stumbled upon the We The People Springfield Hellcat IWB Holster, it seemed to be the perfect solution to my problem. The first thing I noticed about this holster is its durable construction. Made from Kydex, it feels sturdy and well-built, ensuring that my firearm is securely held in place. The flexibility of the material is also a plus, as it allows for a comfortable and secure fit. One of the most impressive features of this holster is the adjustable retention. This feature allows me to set the tension to my personal comfort, providing an additional level of customization to my carry experience. The holster's adjustable ride and cant also offer maximum flexibility in terms of carry options, ensuring that I can find the perfect position for my gun. Despite its many pros, the holster does have a few cons that are worth mentioning. The adjustable clip, while convenient, can be a bit challenging to maneuver at times, especially when trying to change positions on the go. Additionally, the protective sweat guard has a tendency to catch on my clothing, which can be a minor annoyance. Overall, I am quite pleased with the We The People Springfield Hellcat IWB Holster. Its durability, adjustability, and customizable features make it a worthwhile investment for any Springfield Hellcat owner looking for a comfortable and secure carry solution. While there may be a few areas for improvement, the positives far outweigh the negatives, and I would recommend this holster to anyone in the market for a reliable IWB option. 🔗Versatile Car Holster for Springfield XD 9/40 MOD2https://preview.redd.it/hiimlmilsb1d1.jpg?width=720&format=pjpg&auto=webp&s=d1c35c4dd288fe40872b89e5b7bab8efd91f1af2 The ShapeShift Core Car Pack has been a game-changer in my daily life. This versatile holster easily transforms into different carry styles - IWB, appendix carry, OWB belt slide, and OWB paddle holster. The durable polymer and Kydex construction provide a secure fit for my Springfield XD 9/40 MOD2. One of the coolest features is the bonus holster mount, which allows me to attach my ShapeShift to various surfaces, giving me plenty of options for carrying my firearm. However, I did notice that the finish could use some improvement; a more resistant material might prevent the occasional scratch. Overall, this car holster pack has made my life a lot easier and more convenient. 🔗Car Holder Mount for Ultimate Stability and Conveniencehttps://preview.redd.it/5ggvzekmsb1d1.jpg?width=720&format=pjpg&auto=webp&s=03773b387d2900cf020eb03c91fe86cc989dcac9 I recently had the pleasure of trying out the HHJ Phone Mount for Car, a handy little gadget that has been a game-changer on my road trips. With its super stable design, I no longer have to worry about my phone sliding or falling when I hit a bump or take a sharp turn. Not only is it easy to install, taking only five seconds to set up, but it also offers a convenient release button that makes it simple to switch between portrait and landscape mode using the 360 rotation ball joint. This phone mount really does make hands-free calling and navigation during my commutes a breeze, and I highly recommend it to fellow drivers looking for a dependable solution. 🔗Adjustable Air Vent Smartphone Stand for Hands-Free Drivinghttps://preview.redd.it/vmwb22umsb1d1.jpg?width=720&format=pjpg&auto=webp&s=3db5c57b32eaa3844296164a9634ed3bdf92201b I recently gave the Kenu Airframe+ Car Mount a try during a long road trip. This simple yet effective device was a game-changer for me. It's designed to attach to your car's air vent, providing a sturdy and secure way to keep your phone within viewing range while driving. The first thing that stood out to me was the extendable grip. It allowed me to easily adjust the angle of my phone, ensuring that I had a clear view of my GPS navigation, hands-free calls, and music playlist. What surprised me the most was that this mount doubled as a travel stand, making it a perfect addition to my laptop bag for airport layovers or when working from a hotel room. However, there were a couple of minor cons during my experience. The mount has a universal fit, but I found that it was slightly tricky to get it to stay secure in my air vent. Also, the adjustable jaws were not as snug as I would have liked, causing my phone to jiggle a bit more than I preferred. Overall, I believe the Kenu Airframe+ Car Mount is a worthwhile investment for anyone looking for a versatile and functional car phone mount. 🔗Safariland Level III Retention Car Holster: Durable and High-Performance Carrying Solutionhttps://preview.redd.it/b8xtm1ensb1d1.jpg?width=720&format=pjpg&auto=webp&s=4c8b25c32b76494866eb92fd133622b6aad5e5b9 The Safariland SL 7360RDS holster has been an essential part of my daily carry routine for quite some time now. I've tried several holsters in the past, but none have come close to matching the quality and performance of this one. One of the key features that stood out to me is the ALS (Automatic Locking System) retention system. It's an intuitive and easy-to-use system that provides quick and secure access to my firearm. The holster's design perfectly complements my use of red-dot optics on my firearm, and I appreciate how it specifically accommodates my choice of optics. It fits my rig perfectly, and I can easily draw my pistol without any issues. Another significant advantage of the Safariland SL 7360RDS holster is its construction. The SafariSeven material is incredibly durable and lightweight, making it a perfect choice for rugged use. It's a testament to the holster's engineering and manufacturing. However, there are a couple of minor drawbacks. The first is that the release button on the inside of the holster doesn't have any texture, which can make it tricky to press at times. The other issue is that the holster comes with a mid-ride belt loop, which sometimes puts it away from my body. Despite these minor drawbacks, the Safariland SL 7360RDS holster is a top-tier product that any shooter looking for quality and performance should consider. Its superior construction, durability, and ease of use set it apart from the competition. It's perfect for personal defense, law enforcement, and military applications. Buyer's GuideCar holsters are essential for keeping your firearms secure and easily accessible while driving. They offer a convenient storage solution that can be quickly accessed in case of an emergency. This buyer's guide will help you understand the important features, considerations, and general advice when choosing a car holster.CompatibilityEnsure the holster you choose is compatible with the make and model of your firearm. Most holsters can accommodate multiple types of firearms, but it's essential to confirm compatibility before making a purchase. Check the specifications and dimensions of the holster on the manufacturer's website or product description to determine if it will fit your firearm. https://preview.redd.it/5ozmolnnsb1d1.jpg?width=720&format=pjpg&auto=webp&s=355e4ae7e3c3d133346409485ba8040de1690662 MaterialsCar holsters are typically made from materials such as leather, polymer, or nylon. Leather holsters are durable and provide a snug fit for your firearm, but they can be more expensive and require occasional maintenance. Polymer and nylon holsters are lightweight and cost-effective but may not offer the same level of durability as leather.Retention SystemThe retention system is crucial for keeping your firearm secure in the holster. Some holsters use friction to hold the firearm in place, while others use clips, straps, or adjustable retention screws. Consider your personal preference and the level of security you require when choosing a holster with the appropriate retention system.ConcealmentIf you're looking for a car holster that helps conceal your firearm from others, there are options available. Some holsters have a lower profile, allowing the firearm to be tucked away more discreetly. Others have a more overt design to provide easy access in case of an emergency. https://preview.redd.it/0774ie2osb1d1.jpg?width=720&format=pjpg&auto=webp&s=1ea40ce041d18e86c5236746fa93d9f9803b07c7 InstallationCar holsters can be installed in various locations within your vehicle, depending on the type and model. Some holsters can be mounted on the dashboard, while others can be attached to the center console or seat. Make sure the holster you choose offers a secure and convenient installation option that suits your needs.MaintenanceProper maintenance of your car holster is essential to ensure its longevity and effectiveness. Follow the manufacturer's instructions for cleaning and maintaining the holster, and check for any signs of wear or damage regularly. Replace the holster if necessary to maintain its performance and safety.General Advice
https://preview.redd.it/46gthrgosb1d1.jpg?width=720&format=pjpg&auto=webp&s=744c31fc9380916255f0ee17055c7b942c90b708 FAQWhat are car holsters?Car holsters are specially designed cases to securely store and hold firearms, knives, or other self-defense tools inside a vehicle. They provide easy access to the weapon while ensuring safety and protection.Are car holsters legal?The legality of car holsters varies by location and jurisdiction. Some states and countries have specific laws governing the open carry and concealed carry of firearms in vehicles. It is essential to research and comply with local laws before using a car holster. https://preview.redd.it/tpna1lyosb1d1.jpg?width=720&format=pjpg&auto=webp&s=e8f6b98b260e42038582b79e1ef4768b5f65d962 What materials are car holsters made of?Car holsters are typically made from durable materials such as leather, nylon, or plastic. They may have additional features like straps, clips, or adjustable mounting systems to ensure a secure fit in the vehicle.How do I install a car holster?Installing a car holster requires attaching it to a secure surface within the vehicle. Most holsters come with mounting hardware and instructions. Some common installation points are the dashboard, center console, or door panel.Are there different types of car holsters?Yes, there are various types of car holsters, including ones for concealed carry, open carry, and storage of other self-defense tools like pepper spray or a stun gun. Additionally, some holsters are designed for specific firearms models or brands.How much do car holsters cost?The price of car holsters can vary widely depending on the brand, material, and specific features. Generally, they range from around $20 to $100 or more. Shopping around and comparing different options can help you find the best value for your budget.Do car holsters affect the appearance or value of my vehicle?Car holsters are designed to be discreet and not detract from the appearance of your vehicle. However, some holsters may leave minor scratches or marks upon removal. It is essential to choose a holster with a non-damaging mounting system and to follow the manufacturer's instructions for installation and removal.What makes a good car holster?
|
2024.05.19 07:58 ConsequenceSure3063 Best Car Duster
 | submitted by ConsequenceSure3063 to u/ConsequenceSure3063 [link] [comments] https://preview.redd.it/zv74mi7zob1d1.jpg?width=720&format=pjpg&auto=webp&s=686d0ce11438839717e06186744f1fc2fc3218bb If you've ever struggled to keep your prized automobile clean and spotless, then you'll want to pay attention. In this article, we'll be diving into the world of car dusters, exploring the top options available on the market that could make your car-cleaning routine a breeze. From essential features to user-friendly designs, we'll help you find the perfect car duster for your needs. So, buckle up and get ready to witness what these innovative tools can do for your cherished vehicle. The Top 19 Best Car Duster
Reviews🔗Effective Removable Microfiber Car Duster for Dust-Free Vehicleshttps://preview.redd.it/v99y3xszob1d1.jpg?width=720&format=pjpg&auto=webp&s=c1d6899d5f29b3704fdf12eb24a2bc77b2a9a193 The Speedway Car Duster is a true lifesaver for car enthusiasts. This duster is not only easy to use but also incredibly effective at eliminating dust from your vehicle. The microfiber material is soft and gentle on your car's finish, while the removable and washable feature ensures that your duster stays clean and dust-free. One of the standout features of the Speedway Car Duster is the metal tube handle. It provides a sturdy grip, making it easy to maneuver around your car, even in tight spaces. The purple color also adds a touch of elegance and style, making this duster a great addition to your car care routine. Using the Speedway Car Duster is a breeze - simply run it over your car's surface, and watch as the dust magically disappears. The microfiber material is designed to trap dust particles, providing a thorough clean. If you're tired of constantly wiping down your car to keep it dust-free, this duster might just be the solution you've been looking for. Overall, the Speedway Car Duster is a must-have for anyone who takes pride in their vehicle's appearance. With its sturdy construction, easy-to-use design, and effective dust-collecting capabilities, it's no wonder this duster has earned such high praise from its users. 🔗Ride Kings Car Duster: Soft Cotton Exterior Duster for Cars with a Telescopic Handlehttps://preview.redd.it/b5e5ur30pb1d1.jpg?width=720&format=pjpg&auto=webp&s=0d6d404ce558b82b391753e035abb3422f3318b4 I've been using the Ride Kings Car Duster for a while now, and let me tell you, it's quite the handy little tool. Its telescopic rod is a game-changer for those of us with a tad less height, as it allows us to reach those high-up spots without stressing our backs. Plus, the rotating and locking mop head ensures versatility and flexibility for a quick dusting session. What really stands out is the paraffin wax-treated cotton strands that effectively remove dust and pollen without the need for water. Not only does it save water, but it's also gentle on all surfaces, making it a must-have for those who live in dusty environments like desert or coastal regions. The soft, natural, 100% cotton fibers don't scratch the finish, leaving behind no lint after use. Additionally, this duster comes with a portable storage cover, making it easy to tote around in your car trunk and pull off dust whenever you need to. The detachable brush pole head also ensures easy storage. Overall, it's a solid choice for car owners seeking a reliable, eco-friendly cleaning solution. 🔗Ultimate Car Duster Kit: Effortless Sparkle and Cleanlinesshttps://preview.redd.it/u01lkrj0pb1d1.jpg?width=720&format=pjpg&auto=webp&s=fe653e64d697a10e12300af42f10a227500bbb42 I recently got my hands on the upra Ultimate Car Duster Kit, and I must say, this is the best car duster set I've ever used. Not only does it have a sturdy build that won't fall apart or unravel over time, but it also features a special design and tight joint that prevents snagging things on or in my car. One of the things that stood out to me the most was the set's large car duster with a minimum length of 22.8 inches and a maximum length of 32.6 inches. Along with the circular one measuring 11.8 inches in diameter and 4.33 inches in length, and a mini car air vent duster with a dimension of 6.3 inches, this kit has got me covered for all my car cleaning needs. The fine material applied, high-class microfiber, makes sure I leave no lint or wax behind – something I appreciate when I want my car to look as good as new both indoors and outdoors. With its powerful dust or dirt removing performance, this car duster has saved me a significant amount of time and money and works for all vehicle types, from trucks to SUVs and even motorcycles. Now, I must say, it does require some maintenance, but it's worth the investment considering how efficient and easy to operate it is. Upra really knows how to create a top-notch product, and their Ultimate Car Duster Kit is the perfect proof of that. 🔗Original California Mini Car Duster for Dust Removalhttps://preview.redd.it/h92ft5v0pb1d1.jpg?width=720&format=pjpg&auto=webp&s=5a4cb8a80f171815e9632d4879cc054c13c33338 The California Mini Duster has been a game-changer in my daily life. I've been using it for dusting both at home and in my car, and let me tell you, it's made a huge difference in the cleanliness of my interiors. One of the standout features of this product is the baked-in wax treatment. It's not just a cleaner, but also a protector for my vehicle's interior. I've noticed that after using the Mini Duster, the surfaces seem to have a nice shine, which is thanks to that special wax treatment. However, one downside I've found is that while it's great for dusting, it does tend to leave a bit of lint behind. Not a lot, but enough to notice. I've had to shake it out a few times, and I've even ended up using a small brush to get rid of the excess lint. The Mini Duster's compact size is another plus, making it perfect for on-the-go use. It fits in the palm of my hand and doesn't take up much space in my car, which is super handy. Using the Mini Duster has made me appreciate just how much dust I didn't realize was lying around. Now, I find myself using it all the time, and I can definitely say that it's been a great addition to my cleaning arsenal. 🔗Premium Wood Handle Car Duster for Interior Cleaninghttps://preview.redd.it/e6dmph81pb1d1.jpg?width=720&format=pjpg&auto=webp&s=47dd9067635e084e04997530f3b041235bc39683 The Original California Car Duster Platinum Mini Dash Duster has been a game-changer in my life. The special paraffin wax-treated cotton strands make it super easy to lift dust off without leaving any marks behind. The attractive wood handle is not only visually appealing but also sturdy and comfortable to hold. While I enjoy using it for auto purposes, its versatility has proven to be beneficial in my home as well. However, I must mention a minor inconvenience - there was no vinyl storage bag included as mentioned. Nonetheless, it's a fantastic product worth considering for anyone seeking an effortless solution to dust removal. 🔗Soft Microfiber Car Duster for Scratch-Free Cleaninghttps://preview.redd.it/3xqxzzr1pb1d1.jpg?width=720&format=pjpg&auto=webp&s=3d2a15505c07230320c267200cbc587260dd0e52 As someone who's always on the lookout for a car duster that leaves no trace, I gave the bzczh Soft Microfiber Car Duster a try. I've been using it for a few weeks now, and I must say, it's been a game-changer. This duster is incredibly soft, making it perfect for gently removing dust from the exterior of your car without causing any damage. I'm impressed by how well it picks up even the tiniest particles, leaving my car's surface spotless. The extendable handle is really convenient, allowing me to reach those hard-to-reach spots without straining my back. And the best part? No pesky lint, pollen, or swirl marks to worry about. However, one downside I noticed is that the duster seems to lose some of its softness after a few washes. But it's not a deal-breaker, as the results are still noticeably better than what I've experienced with other dusters. In conclusion, the bzczh Soft Microfiber Car Duster definitely lives up to its name, providing a gentle yet effective solution for keeping your car's exterior dust-free. Despite the minor downside, its pros outweigh the cons, making it a great choice for anyone looking for a car duster that truly delivers. 🔗Professional Quality Car Duster for Spotless Interior Detailinghttps://preview.redd.it/xrvpc5w2pb1d1.jpg?width=720&format=pjpg&auto=webp&s=c56e0bfc6dac8e4401ce53b05286d316aa6781ad I recently discovered the TAKAVU Interior Car Detail Duster and couldn't be happier with the result. As a car enthusiast, I've been searching for a dusting solution that not only leaves my vehicle looking incredible but also doesn't require constant maintenance. This car duster truly exceeded my expectations. Its electrostatic microfiber chenille is a game-changer, as it captures and locks away dust and debris without leaving traces of lint or residue behind. I appreciated how effortlessly it tackles various surfaces, from my car's interior to other items around the house. However, I did encounter a minor issue with the design. The duster occasionally needed some repositioning to ensure complete coverage, but it was a small price to pay for the overall results. Despite this minor inconvenience, I still highly recommend the TAKAVU Interior Car Detail Duster. Its ability to leave my car's interior spotless has saved me countless trips to the car wash, and it has become a staple in my detailing toolkit. Plus, it's an excellent gift for car lovers in your life! 🔗Car Duster with Solid Wood Handle and Soft Dusting Fibershttps://preview.redd.it/47g98o13pb1d1.jpg?width=720&format=pjpg&auto=webp&s=91cc1649d89d43b5fdd3ffa27b1073a3ed4d7b9b I recently received the Classic Car Duster with a solid wood handle for my daily car maintenance. The long and narrow design of the duster allows me to easily access those tight and hard-to-reach areas, making it a fantastic tool for those who are particular about their car's appearance. One of the most significant features that stood out to me was the 3-inch long threads, which attract and lift dust from the vehicle's surface. I've noticed a marked improvement in the overall cleanliness and shine of my car thanks to this duster. However, it is essential to note that due to the 100% cotton construction, there may be some lint and wax residue during the initial use. But once this product breaks in, it becomes even softer and continues to perform exceptionally well for years to come. Frequent shaking before, during, and after use helps to prevent this issue. Lastly, I appreciate the durable storage cover included in the package, which ensures the duster remains in pristine condition when not in use. Overall, I highly recommend this Classic Car Duster for anyone looking to achieve that showroom finish every time. 🔗Extendable Car Duster Set with Anti-Rust Stainless Steel Brushhttps://preview.redd.it/b58dzyl3pb1d1.jpg?width=720&format=pjpg&auto=webp&s=9dd56b8fe8c26ca158b5c55eade2cf973ab96e3d Riding around in a dusty car is never fun, but with the Ride Kings Car Duster Set, it's become easier to keep your vehicle clean. This clever car duster set comes with an extendable handle, perfect for reaching areas like the roof, windshield, and hood of large vehicles. The ergonomic handle is soft and comfortable to grip, even during long cleaning sessions. One of the standout features of this car duster set is its dual-brush head. The large brush head covers a larger area and quickly removes dust, while the smaller brush is perfect for tackling those hard-to-reach spots. The set also comes with a stainless steel brush rod that's light yet strong, with a non-slip, soft foam handle for even more convenience. What's especially cool about this car duster set is its portability. The brush set can be carried in the trunk of your car for easy use during road trips. With its removable brush head, you can easily fold it and store it for optimal travel convenience. Not only is this car duster set functional, but it's also eco-friendly. Its paraffin-treated cotton thread can effectively remove dust and pollen without using water, making it ideal for those living in desert or coastal areas. One minor drawback is that the Ride Kings Car Duster Set is not suitable for wet use. But overall, with its retractable handle, flexible brush head, and gentle touch, this set is the perfect addition to any car care routine. 🔗Universal Car Duster with Extension and Rotation Featureshttps://preview.redd.it/egfr6fw3pb1d1.jpg?width=720&format=pjpg&auto=webp&s=2fcae20c7622a79fa25057293f5f5285612ce2af A few weeks ago, I decided to try out the Triple Threat Extending and Rotating Truck and RV Duster from California Car Duster. As someone who's always on the go, I needed a versatile duster that could handle my busy lifestyle. I was curious to see if it could live up to the hype and clean my dusty SUV with ease. Right out of the box, I was impressed with the duster's aluminum handle. The extension feature made it simple to adjust the length, reaching high areas like the roof of my vehicle. The larger duster head was perfect for getting into tight spaces and hard-to-reach corners in my SUV and garage. However, I did notice a small issue with the rotating feature - it didn't spin as freely as I would have liked. And at times, the brush seemed to move dust around instead of lifting it efficiently. Still, I could see the wax-treated 100% cotton mop working its magic on lighter dust. The best part was the convenient storage bag that came with it. I could easily slip it in the back of my SUV when I needed to use it, and keeping the duster in a safe place ensured it would always be clean and ready to use when I needed it. Overall, the Triple Threat Extending and Rotating Truck and RV Duster from California Car Duster was a helpful addition to my car care routine. It made cleaning my SUV quicker and more efficient, and the extension feature and storage bag were thoughtful touches. While there were some minor drawbacks, I would still recommend this duster to anyone looking for an easy and effective way to keep their SUV or RV clean. 🔗Premium Extra Large Car Duster with Marine Varnished Wood Handlehttps://preview.redd.it/7vfzu8n4pb1d1.jpg?width=720&format=pjpg&auto=webp&s=a2ffc32844154f554b416cabe1cc4f99b7d84981 The OCM Premium Extra Large Car Duster has been a game-changer in my daily life. Its robust design, combined with its lightweight nature, makes it effortless to use. The marine varnished solid wood handle adds a touch of sophistication, while the duster's head is crafted from superb 100% cotton threads. These cotton threads are infused with a unique wax formula, which makes them gentle and perfect for cleaning delicate surfaces. However, it's essential to note that the duster may initially leave some lint and wax residue as you use it for the first few times. This is completely normal, and the residue will gradually diminish as the duster breaks in and gets softer. The duster boasts an extra-large head which significantly reduces cleaning time and ensures that your car or truck always has a shiny, showroom finish. Its durability is unmatched, and its storage cover, made of heavy gauge vinyl, ensures the duster head is protected while not in use. Overall, this OCM Premium Extra Large Car Duster is a worthwhile investment for anyone who wants a top-quality car detailing product that saves time and money. The duster's excellent performance, combined with its ease of use, makes it a no-brainer for professional detailers and enthusiasts alike. 🔗Effortless Dash Duster for Clean Vehicle Interiorshttps://preview.redd.it/uh9kx1s4pb1d1.jpg?width=720&format=pjpg&auto=webp&s=366a3dadb0578453dd6a6e2be6d98ed6256b17c6 I've been using the California Duster for months now, and it's been a game-changer for keeping my car's interior clean and free of dust. The paraffin wax-treated cotton mop is perfect for its intended purpose, providing an effortless and gentle dust-lifting experience without damaging my car's surfaces. One of the most notable features of the California Duster is its clever design, with a rounded shape that makes reaching even the trickiest corners and tight spaces a breeze. Not only does this help keep my dashboard looking pristine, but it also works wonders on various household surfaces, from mini blinds and shutters to appliances. However, there is one downside to the California Duster: its relatively short length. I've found myself needing to contort my arm in some positions to reach certain areas, which can be a bit uncomfortable after a while. Overall, I'd definitely recommend the California Duster for anyone looking to keep their car or home interior in tip-top shape without causing any damage. It might be a bit short for some users, but it's a small price to pay for an effective and eco-friendly product. 🔗Unique Ostrich Feather Duster for Car Cleaninghttps://preview.redd.it/rialep95pb1d1.jpg?width=720&format=pjpg&auto=webp&s=fa7f3ce79a7489b4c69b7fa9dcb982c1b20cfbdf For the past couple of weeks, I've been using the Aldwin Ostrich Feather Duster as part of my daily house cleaning routine. Let me tell you, it's like having a little army of soft, fluffy soldiers fighting against dust and grime. Each feather feels like a million tiny cleaning superheroes, gently gliding through the air, tackling every smudge and speck in their path. One of the things I love about this duster is its eco-friendliness. The feathers are sourced from farmed ostrich, ensuring no harm is done to the environment or endangered species. And the fact that the feathers are washed, deodorized, deinsectized, and fumigated before use? That's just an extra bonus. The wooden handle is a great addition, providing a sturdy connection between the feathers and the handle. It's just one of those things that makes this duster feel solid and reliable in your hand. And speaking of handling, the ostrich feathers are static-free, which means they don't leave any annoying little particles on your clothes or furniture. The best part is that this duster is reusable and washable. You can simply wash it in warm water and let it dry, and it's as good as new. It's like having a little cleaning companion that you can take anywhere, from your home to your car. However, I will say that the duster does require a bit of care when it comes to storing it. Since the feathers are delicate, it's important to hang it or place it in a vase where it won't be crushed or bent. But all in all, it's a fantastic product that's made a significant difference in my cleaning routine. 🔗Original California Car Duster for Interior Cleaninghttps://preview.redd.it/7tr6mno5pb1d1.jpg?width=720&format=pjpg&auto=webp&s=e2b091037f1574d00a4e98943649b88792f51e3e I've been using the Original California Car Duster Black Mini Duster in my car for a few weeks now, and I must say, it's a game-changer. What stands out the most is its ability to lift dust from even the toughest to reach spots, both inside and out. The baked-on wax-treated cotton strands are soft yet effective, making the cleaning process effortless. One downside I've noticed is that it can be a bit bulky for smaller vehicles, but its compact size is perfect for most cars. I also appreciate that it's lightweight and easy to use. The mini duster comes with a convenient storage bag, making it a great addition to any vehicle owner's cleaning toolkit. All in all, the Original California Car Duster Black Mini Duster has made a positive impact on my daily life. It's easy to use, effective, and best of all, it's durable and doesn't require any maintenance or replacements. Highly recommended for anyone looking to keep their car clean and dust-free. Buyer's GuideWhen it comes to maintaining the cleanliness of your car's interior, a car duster is an essential tool. It helps remove dust, dirt, and debris from your car's surfaces without causing any scratches. However, with so many different car dusters on the market, it can be challenging to know which one is right for you. Here are some important features, considerations, and advice to help you make the best choice.Materialhttps://preview.redd.it/45261a48pb1d1.jpg?width=720&format=pjpg&auto=webp&s=5bb60155d2d64389b39dcb6343228374d08ab0e0 The material of the car duster is crucial. It should be made of soft, non-abrasive, and durable material that won't damage your car's interior. Common materials include microfiber, cotton, and polyester. Microfiber is a popular choice because it's soft, gentle, and effective at picking up dirt and dust. However, it may be more expensive than other materials. Cotton and polyester are also good options, but they might not be as effective at picking up fine dust as microfiber. Size and ShapeThe size and shape of the car duster can impact its effectiveness and ease of use. Look for a duster with a head that's large enough to cover a significant area but not so large that it's difficult to maneuver. The shape should be designed to cover a wide range of surfaces, such as dashboard, console, and seats. Some car dusters come with different attachments for specific tasks, like cleaning vents or tight spaces.Handle LengthThe length of the handle can make a big difference in your comfort and reach. Consider the height of your car's interior and ensure the handle is long enough to reach all areas easily. If you have a low-slung car or need to clean high areas, look for a car duster with an adjustable handle. https://preview.redd.it/gir1a7p8pb1d1.jpg?width=720&format=pjpg&auto=webp&s=450b10e3b0ab25d5f7295d8d2bfe0eb150bf25fc MaintenanceA car duster should be easy to clean and maintain. Look for a duster with a removable and washable head to make cleaning simpler. Some car dusters also come with a storage bag or pouch to keep them organized when not in use.PricePrice is always an important factor when considering a product. Car dusters can range in price from budget options to high-end models. Consider how much you're willing to spend and what features are most important to you when deciding on a car duster. Remember that a higher price doesn't always guarantee better quality.Reader Reviews and Ratingshttps://preview.redd.it/4fxm55l9pb1d1.jpg?width=720&format=pjpg&auto=webp&s=c50b823120cc07622f381f7e6eb282f1d0bf0791 Reading reviews and ratings from other buyers can help you make a more informed decision. Look for car dusters with high ratings and positive reviews. Pay attention to feedback on ease of use, durability, and effectiveness. When it comes to choosing the right car duster, it's essential to consider factors like material, size, shape, and maintenance. By doing your research and finding the best car duster for your needs, you'll be able to keep your car's interior clean and beautiful. FAQWhat is a Car Duster?A Car Duster is a tool commonly used by car enthusiasts and professionals to quickly and easily remove dust, dirt, and debris from cars. It is designed to avoid the scratches and swirls that can be caused by regular wiping or cleaning methods. https://preview.redd.it/3oqpq5t9pb1d1.jpg?width=720&format=pjpg&auto=webp&s=abefd10fcbf64ae101739735bd1ee0fc4103d462 How does a Car Duster work?A Car Duster typically consists of a soft, microfiber cloth that is loosely attached to a handle. When the user lightly runs the duster across the car's surface, the static electricity built up in the microfiber cloth attracts and picks up dust and dirt particles. This method helps to prevent scratching, as the cloth does not have to physically rub against the car's surface.What types of Car Dusters are available?There are several types of Car Dusters available in the market, such as: * Flat Car Dusters
Can a Car Duster be used on all car surfaces?Yes, a Car Duster can be used on most surfaces of a car, including exterior paint, windows, mirrors, and even the interior. However, it is crucial to avoid using it on delicate areas such as rubber trim or plastic parts that can get damaged by static. Always read the product instructions and test it on a small, inconspicuous area before use on any specific part of the car.How often should I use a Car Duster?The frequency of using a Car Duster depends on your personal preference and the level of dust and debris your car accumulates. However, it is generally recommended to clean your car regularly to prevent dirt buildup, protect the paint, and maintain its overall appearance. A weekly or bi-weekly maintenance routine can ensure your car stays clean and well-maintained.How do I clean and maintain my Car Duster?To clean your Car Duster, you can simply wipe it thoroughly with a damp cloth, or use a mild detergent and water solution if it's severely dirty. After cleaning, allow the duster to air dry completely to prevent any mold or mildew growth. To maintain the effectiveness of the duster, store it in a cool, dry place away from direct sunlight to prolong its lifespan.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.19 07:53 Significant-Tower146 Best Car Door Unlock Kit
 | submitted by Significant-Tower146 to u/Significant-Tower146 [link] [comments] https://preview.redd.it/7oynhna6ob1d1.jpg?width=720&format=pjpg&auto=webp&s=d27d6293024c89d47fa13fc2cebf1d2d349beb1f Looking to upgrade your car's security system? Look no further! In our roundup of the best Car Door Unlock Kits, we've gathered the top products on the market that promise convenience and protection for your vehicle. Read on to explore these innovative solutions and find the perfect fit for your needs. Stay tuned for more informative articles on the latest automotive products! The Top 13 Best Car Door Unlock Kit
Reviews🔗Dorman Emergency Door Unlock Tool with Vinyl Griphttps://preview.redd.it/ssvyme07ob1d1.jpg?width=720&format=pjpg&auto=webp&s=99f8476a67c556974c558632ea0d2efc7a69de0a Well, my experience with this Dorman Emergency Door Unlock Tool has been quite an adventure, let me tell you. I mean, I've always been a bit of a worrier, especially when it comes to my car door. I've had my fair share of lockouts, and it's never a good time. But this little tool, it's changed everything! First off, I love how versatile it is. I can reshape it to fit the thickness of my door and the location of the lock. It's like it's tailor-made just for me, and my car! Plus, it comes with a nice vinyl hand grip. It makes it so much easier to use. It's like holding onto a friendly, familiar face in a moment of pure panic. Another great thing about this tool is that it's portable. It folds up so neatly, like a little origami masterpiece. It fits perfectly in my pocket, purse, or any other compartment I can find. It's like having a magic trick up my sleeve, always ready to save the day. But, let's be real, no product is perfect. I have to admit, this tool can sometimes be a bit of a troublemaker. It's not always as smooth as I'd like it to be. There have been a few times when it's stuck in the narrow space between the door and the weather stripping. It's kind of like trying to force a square peg into a round hole, you know? It can be a bit frustrating. However, on the bright side, I've found that by taking a little extra time and being patient, I can usually get it to work. And when it does, it's such a relief! It's like a personal victory, and it makes me feel so smart and resourceful. So, would I recommend this product? Absolutely! It's not perfect, but it's worked wonders for me. It's like having a little insurance policy tucked away in my pocket, always there to help me out when I need it most. I'm just glad I stumbled upon it. 🔗Lock Technology 4-Piece Easy Access Folding Door Opening Kithttps://preview.redd.it/scl6xh67ob1d1.jpg?width=720&format=pjpg&auto=webp&s=f050ad141adf382263d7dcfea99d013d88623cc9 I recently discovered the Lock Technology 145 Easy Access Folding Door Opening Kit, and it has become an indispensable tool for unlocking my car doors. This compact device is a true lifesaver when I've locked my keys inside or when I need to access the trunk in a hurry. The highlights that caught my attention are the screws that don't require a coupler, which have made it incredibly easy to use. Plus, the collapsible design allows for easy storage in my glove compartment. Another great feature is the presence of a middle extension piece that covers the entire car and can be used for long reach applications. The shorter tip is perfect for accessing lock buttons, while the glowing tips on models 135-2B and 135-2C are an excellent innovation for nighttime use. One downside I experienced was the need for more precise angle adjustments when trying to unlock my car doors. While the rigid design facilitated easier access through the window, it could be trickier for those with less experience or unsteady hands. Other than that minor inconvenience, this door opening kit has been a game changer for me. So, if you're someone who often finds themselves in need of a last-minute or after-hours unlock solution, I highly recommend giving the Lock Technology 145 Easy Access Folding Door Opening Kit a try. You won't be disappointed! 🔗Universal Key Retrieval Tool for Carshttps://preview.redd.it/fza6i2i7ob1d1.jpg?width=720&format=pjpg&auto=webp&s=4f23fa1bae38cffd98f2be3aca02604ddb5c709f Imagine locking your keys in your car. It's a frustrating and stressful situation, but with the Universal Lockout Tool, you can save yourself some time and money. This ingenious tool works with most American cars, as well as some international brands such as Audi, Toyota, and Volkswagen. The best part? It's made of sturdy metal, giving you the confidence to use it without worrying about damaging your vehicle. It measures about 5/8" x 22", making it compact enough to carry around in your glove compartment or tool kit. While some users have had issues with its thinness and flexibility, many professionals find it a decent entry-level tool for those occasional lockouts. Plus, at its affordable price, it's definitely worth considering as an insurance policy against those unexpected key-locking mishaps. But remember, practice makes perfect. Always read the directions included on the back of the package and familiarize yourself with the tool before attempting to use it on your car. With some patience and a bit of finesse, you'll be able to unlock your vehicle in no time! 🔗Geevorks Power Door Lock Actuator 12Vhttps://preview.redd.it/muh2e2z7ob1d1.jpg?width=720&format=pjpg&auto=webp&s=d19305a1e6ea49f50436e7ed756977e30c865fab As a car enthusiast, I was excited to try out the Geevorks 12V door lock actuator. This kit made upgrading my old manual door locks to automatic ones a breeze! The installation was relatively easy, and the product included everything from door lock actuators to remote controls. The remote controls allowed me to lock and unlock my car from a distance, giving me peace of mind when I step away from my vehicle. One of the main highlights for me was the trunk release button, adding an extra layer of convenience when I need to access my trunk. Additionally, the door lock actuator can be used in remote control and alarm systems, making it a versatile product for various car security needs. On the downside, the remote control distance could be improved. In some cases, I experienced a weaker signal which made locking or unlocking the car from a distance less reliable. Despite this minor inconvenience, overall, the Geevorks door lock actuator has made my driving experience more secure and convenient. 🔗Car Door Unlock Tool with Vinyl Griphttps://preview.redd.it/c6x7rm58ob1d1.jpg?width=720&format=pjpg&auto=webp&s=803f575bfc977f1e89d1fc88355828684cde5c1a Dorman's Emergency Door Unlock Tool is a handy little gadget that can save your day if you accidentally lock your keys inside your car. Imagine the relief of unlocking your car door within seconds using the slim design of this tool, which can be easily folded to fit in your pocket, purse or other compartments. The vinyl hand grip makes it comfortable and easy to use even in tight spaces. However, there are some downsides to consider. Some users found it difficult to get the tool past the window seal and mentioned it folds up easily during use. It may not work effectively for all types of car doors due to their varying thickness and lock locations. Overall, this tool can be quite useful for those who occasionally find themselves locked out of their vehicle. But be aware that it might require some practice or patience to get it right depending on your particular car model. So, if you're looking for a quick solution to this common mishap, Dorman's Emergency Door Unlock Tool could be worth a shot. 🔗Universal 10-Piece Vehicle Unlock Tool Kithttps://preview.redd.it/s6357qm8ob1d1.jpg?width=720&format=pjpg&auto=webp&s=a98a6022487db229e198a018819a6715ec59de81 I recently had an unfortunate experience where I locked myself out of my car. Panicking, I remembered the Universal 10-Piece Vehicle Unlock Tool Kit I'd heard about. Its assorted tools and convenient pouch seemed perfect for this situation. Upon pulling it out of the bag, I was immediately disappointed by the poor instructions. The metal tools felt flimsier than anticipated, bending on the first attempt. However, the variety of tools allowed me to eventually unlock my car door, although not without a fight. I wouldn't recommend this to a friend, but it did save me from an expensive professional service. The tool kit is compact and easy to carry, making it a handy emergency tool for drivers. The metal tools are versatile, catering to different vehicle models. The convenient pouch is spacious enough to hold all the tools. However, the build quality of the tools is disappointing, as they seem to bend easily under pressure. Overall, it's a useful tool kit for occasional use, but don't expect it to last a lifetime. 🔗Unlock Your Car Door with Ease: LTI135 2-Piece Easy Access ToolKithttps://preview.redd.it/tw4kx129ob1d1.jpg?width=720&format=pjpg&auto=webp&s=99dbc9a67e834fef37c0f4356ab77c6c6aeadaad I recently used the Lock Technology Easy Access Door Unlocking Tool Kit 135 in a tricky situation where I locked myself out of my car. To my relief, this 2-piece tool easily collapsed for convenient storage and extended to reach the car's windows. The whale tail tip design worked like a charm on the lock surfaces, making it a breeze to unlock my car door. Plus, the included plastic slip jim and door wedges provided extra support. However, despite the overall positive experience, I did face a minor issue with this kit. The lack of a highlight feature in the product description made it somewhat challenging to understand the exact specifications of each component. Additionally, the green color of the tool might not appeal to everyone's taste. In conclusion, the Lock Technology Easy Access Door Unlocking Tool Kit 135 proved to be a reliable and effective solution for my car lockout predicament. Its collapsible design, whale tail tip, and additional accessories make it a worthwhile investment for those looking to keep a handy tool in their vehicle for emergencies. 🔗Glow-in-the-Dark Car Door Unlocking Tool Kit with Lock Knob Lifter and Paint Protectorhttps://preview.redd.it/m15v5eb9ob1d1.jpg?width=720&format=pjpg&auto=webp&s=b7b2cb2558331b8dc5735088bb6188452d7505ae As a reviewer who has experienced the joy of retrieving keys from locked cars, I can attest to the life-saving capabilities of the Steck Big Easy Glow with Wedge Lockout Tool Kit. This kit has everything you need to rescue someone from their own forgetfulness or mischief at any hour of the day or night. The glow-in-the-dark yellow hue is not only cool but also incredibly functional, allowing you to see the tool even through tinted windows. One aspect that really stood out for me was the easy wedge feature. It offers controlled opening of the car door for insertion of the Big Easy Glo, making it incredibly easy to access the inside of the vehicle without causing any damage. Additionally, its non-marring wedge prevents scratches or damages to your car, ensuring your beloved vehicle stays pristine even after a minor lockout incident. However, despite its many positives, there are a few cons worth noting. The included air wedge seems to be somewhat delicate and may not last as long as other parts of the kit. Also, while the kit is effective on 98% of all cars and trucks, there might be some models or makes that are not compatible with this tool. In conclusion, if you're someone who often encounters people locked out of their cars, then the Steck Big Easy Glow with Wedge Lockout Tool Kit is definitely worth considering. It's easy to use, effective, and offers an array of useful features that cater to different types of car locks. While it may have some minor drawbacks, overall, it's a reliable tool that can save both time and money when used appropriately. 🔗Visible Pink Door Unlock Kit for Carshttps://preview.redd.it/r29an9o9ob1d1.jpg?width=720&format=pjpg&auto=webp&s=81653982435b7669f52d6214c42ae406814781ae I have been using the Steck Lockout Tool Kit Big Easy for over a year now, and let me tell you, it's been an absolute game-changer. This tool has saved me countless times when I've locked my keys inside the car, much to the amusement of my friends. One of the first things that stood out was the high visibility pink powder coating on its 55-inch long handle. In the middle of the night or during a snowstorm, finding this pink tool is a breeze compared to the black ones I used before. Plus, the improved non-marring wedge is now wider, longer, and smoother, making it even easier to use in various car models. While the Big Easy is primarily designed for unlocking car doors, it also features a lock knob lifter, which comes in handy for cars with flat lock knobs at the top of the door. No more trying to improvise with a wire hanger or credit card - the Big Easy does it all. However, there are a couple of minor drawbacks. Some users might find the storage size of the tool inconvenient, and it would be great if the package included a pump-up air bag for extra versatility. Overall, the Steck Lockout Tool Kit Big Easy has been a reliable and convenient addition to my toolbox. With its 55-inch long handle and high visibility pink coating, I can quickly and easily unlock any car door without causing damage. If you're someone who frequently misplaces their keys or finds themselves locked out of their vehicle, I highly recommend giving this tool a try. 🔗Chevrolet Power Door Lock and Unlock Kithttps://preview.redd.it/fxzncp7aob1d1.jpg?width=720&format=pjpg&auto=webp&s=8d107018b76834aab8c3b04d5635f15620b73de1 I recently installed the Biltek Power Car Door Lock and Unlock Kit in my Chevy Colorado, and I must say, it has been a game-changer. Before, I had to manually lock and unlock each door, but now, everything is just a button press away. The package included everything I needed to get started, from the simple diagram to the main module and actuators. Plus, it's compatible with my alarm system, so I can control everything right from my alarm remote. The standout feature for me is the keyless entry. It's so convenient to hop in the car and just unlock the doors with a push of a button. The only downside I noticed was that the installation process took some time and effort, but once it was done, everything worked seamlessly. Overall, I highly recommend the Biltek Power Car Door Lock and Unlock Kit to anyone looking to upgrade their vehicle to a central locking system with keyless entry. It's easy to use, reliable, and a great investment for any car owner. 🔗Universal Door Lock and Unlock Conversion Kit for 2, 3, 4 Car Doorshttps://preview.redd.it/5errq2gaob1d1.jpg?width=720&format=pjpg&auto=webp&s=1b3b2d0192c67af9501b4d932da30d6f87609898 I recently upgraded my car with the Biltek CX-402 Universal Central Door Lock and Unlock Conversion Kit, and I must say it's made a world of difference in terms of convenience. The kit is easy to install, requiring no additional hardware and coming with a clear diagram that guides you through the process. One of the standout features is its universal compatibility, fitting all known cars, trucks, SUVs, and vans. This has been particularly useful for me, as I often drive different vehicles. The Central locking system provides a state-of-the-art solution, converting manual door locks into a fully functional keyless entry system. However, there's a downside to this product - the poor-quality wires. The wires were the only problem I encountered during installation, which was quite frustrating. Despite this, the Biltek CX-402 is an overall solid choice for anyone looking to upgrade their vehicle's locking system. 🔗Easy Access Door Unlocking Kit for Carshttps://preview.redd.it/88tquntaob1d1.jpg?width=720&format=pjpg&auto=webp&s=ff513b3f87a7f0209a4f510974338b3750cc8e2a I recently got my hands on this LTI LT-126 Easy Access Tool and boy, has it been a game-changer for me! After suffering countless failed attempts to unlock doors in tight spaces or with tricky locks, this little tool has made things so much easier. The whale tail tip design is pure genius, allowing it to grip the lock more securely and catch it without much effort. Plus, the fact that you can use it with or without the vinyl tips depending on your preference just adds to its versatility. What I particularly appreciated was how the tool came packaged in a simple yet sturdy custom kraft cardboard box. Not only did it make the whole experience feel more special, but also added an environmental touch which is always a welcome sight. However, one thing that could have been even better was if the tool had come with some detailed instructions on how best to handle it, especially for first-time users. Nonetheless, once you figure out the right technique, this LTI LT-126 Easy Access Door Tool truly lives up to its name! 🔗Stylish modern hide a bed chairhttps://preview.redd.it/31d6i74bob1d1.jpg?width=720&format=pjpg&auto=webp&s=2939790b1647de9e7853c7573b56fde97666955c As a frequent traveler, I've found the Grip 8pc Lockout Tool Kit to be an absolute lifesaver. Imagine being stuck outside your car on a sweltering day, with no spare key or anyone to help you out. That's where this tool kit comes in. It's got everything you need to unlock your car door in no time. One of the standout features of this kit is the slim jim bars - they're so thin yet sturdy, you'll wonder how they're able to pry open even the toughest doors. The slim jim bars are backed up by other useful tools like the wire form S hook slide lock tool and the wonder tool. Together, they make sure you're never locked out for long. On the flip side, I did find the metal parts to be slightly flimsier than I'd hoped. It's not a deal-breaker but it does make me wary of using this kit too frequently. However, for occasional usage or as a backup tool, the Grip 8pc Lockout Tool Kit definitely earns its keep. In conclusion, this tool kit has proven to be an essential part of my travel gear. It's well-made, easy to use, and offers a range of tools for different types of car doors. So whether you're prone to misplacing your keys or simply want to be prepared for any situation, the Grip 8pc Lockout Tool Kit is a worthwhile investment. Buyer's Guidehttps://preview.redd.it/0mful7jbob1d1.jpg?width=720&format=pjpg&auto=webp&s=588588762ddd4321b0ee3c5c1aac54afd5f478e5 None FAQhttps://preview.redd.it/zn1a4f1cob1d1.jpg?width=720&format=pjpg&auto=webp&s=8829d39cb0a422bb28366c0f2fbc43ccb4add129 What is a car door unlock kit?A car door unlock kit is a collection of tools designed to help you unlock your car in case you've lost or misplaced your key. The kit usually includes items such as a wire hanger, slim jims, and tension wrenches. These tools are safe to use and can help you gain access to your vehicle without causing any damage.How do I use a car door unlock kit?https://preview.redd.it/scdh11ccob1d1.jpg?width=720&format=pjpg&auto=webp&s=85d934d052c22688ac4363ab047962f14782aa23 Using a car door unlock kit is relatively simple. Start by inspecting the lock mechanism on your car door. Then, select the appropriate tool from the kit and insert it into the keyhole or narrow space around the lock to manipulate the locking mechanism. Gently twist and jiggle the tool until the door is unlocked. Can I use a car door unlock kit on any vehicle?Car door unlock kits are designed to work on most vehicles. However, it's essential to ensure that the kit you choose is compatible with your specific vehicle model. Some kits may not work on certain newer vehicles, so it's crucial to read the product description carefully before making a purchase. https://preview.redd.it/xt6meomcob1d1.jpg?width=720&format=pjpg&auto=webp&s=35063fa5f479018a5c4d1be00d6062d0617f202b How long does it take to unlock a car door with a kit?The time it takes to unlock a car door using a kit varies depending on the skill level and experience of the user. On average, it takes between 5-15 minutes to unlock a car door using a kit, but some users may require more time, especially if they are unfamiliar with the tools or the specific vehicle model.Will using a car door unlock kit damage my vehicle?A high-quality car door unlock kit should not damage your vehicle. However, if you use improper techniques or force the tools, there is a risk of causing minor scratches or damage. To avoid this, ensure you follow the instructions that come with the kit and use the tools gently and carefully.How much does a car door unlock kit cost?The cost of a car door unlock kit varies depending on the brand, quality, and the type of tools included in the kit. Prices can start at around $10 for basic kits and range up to $50 or more for more advanced, professional-grade sets. It's essential to consider factors such as your expertise, the specific tools needed, and the value for money when choosing a car door unlock kit.Is it legal to use a car door unlock kit?In most cases, it is legal to use a car door unlock kit on your own vehicle. However, using a unlock kit on someone else's vehicle without their consent could be considered a crime. It's crucial to familiarize yourself with local laws and ensure you have permission from the vehicle owner before using a car door unlock kit on their vehicle.How can I prevent needing to use a car door unlock kit in the future?To prevent the need for using a car door unlock kit in the future, consider adding a spare key or key fob to your possession, or programming an emergency contact with access to a spare key. Additionally, always double-check your pockets, bags, or purse before leaving your vehicle to ensure you have your keys with you at all times.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.19 07:24 PinballPounce A comprehensive guide to sound-deadening a 2018 Third Gen Mazda3 Hatchback
This will function as a one-stop guide to sound deaden the 3rd generation Mazda3. I believe it will be useful for any previous or next-gen Mazda3 owner, or anyone with a CX-30, as these platforms share many components.
Like others undertaking this project, I did a ton of research on sound deadening, the process, and the products first before jumping in. I would encourage anyone pursuing the same project to read through the links I’ve included in this write-up as they should give you all the information you need to sound-deaden your car in a comprehensive, easy manner, without having to do the weeks of research I had to do.
Pre-reading:
If you haven’t already, read through this thread for background as this is a solid, comprehensive write-up.
https://www.mazda3revolution.com/threads/sound-deadening-my-17-mazda-3-bn.242072/
Materials Needed:
1. Butyl-based mat to apply first as your base layer
I used 72 square feet to do the entire car, including hood, wheel wells, full interior, rear hatch area, and all doors. I did not do the headliner.
Total cost: $200 CAD
I used 1 box of 2mm (80 mil) Kilmat, and 1 box of 2.5mm Amazon branded butyl sheets. I found the Kilmat had better adhesion and was easier to cut and work with, because of the smaller sheet sizes, so I used this for tight spaces and the doors. The Amazon stuff was great to apply to large areas such as the floor of the vehicle, because I would just stick one entire sheet down and be done with it. It’s also slightly cheaper than the Kilmat.
Other brands: Silless, which manufactures the closed cell foam, also makes this stuff for a reasonable price.
2. Closed cell foam as the second layer
I used 100 square feet.
Total cost: $200
I did a LOT of research and shopping around to find the best balance between price, value, and performance of closed cell foam. I ultimately landed on using Siless Liner 157mil (4mm) closed cell foam which I found on Amazon. Noico is also another brand that makes this stuff for slightly more cost. These come in boxes of 51 square feet for about $100. I thus bought two boxes of the stuff. I did end up with leftover product, which I have saved as it can be used to stick on anything else that causes noise such as a furnace, washing machine, etc along with the leftover butyl mat.
3. Rubber-based floor underlay as the final layer
I used a 100 square foot roll of Technoflex Underlayment Acoustic Membrane, 2mm thickness.
Total cost: $85
Product link: https://www.rona.ca/en/product/technofloor-technoflex-underlayment-acoustic-membrane-thermal-insulation-4-ft-x-25-ft-x-008-in-100-sqft-rubber-material-black-m2000-100-73015020
Alternate link: https://technoflexintl.com/en/product/technofloor-acoutstic
Other products I considered, but chose against as the Technoflex is thicker
Please note, this product is not adhesive. You lay it down like a blanket and you need to cut it to fit in tight spaces. Thus, I did not use it in vertical areas like the doors. I only used it on the floor and trunk of the vehicle. I am not technically inclined enough to adhere or screw it on the doors, but there are other people in the links on this thread who have done so, so depending on your skill level it is certainly possible.
All Tools Required
I have a general interest in cars but the most technical work I’ve ever done are oil changes and tire swaps. This was the largest and most technical project I ever embarked on. I work an office job, so I don’t even work with my hands a lot. If I can do it, so can you (as long as you set aside the time and have the proper tools).
Results
I did not take before-after videos, as that has been captured by videos on Youtube as well as people who have measured the noise levels in the threads below. All I can tell you is that this does work. In my opinion, the project even for a newb like me is totally worth it. For less than $500, and a couple days of work, you can make your Mazda feel like an entirely different vehicle.
Now, sounds and vibrations are barely transmitted going over rough roads. The car feels so much more planted and stable when going over bumps. The audio system sounds better. The doors close with a rich-sounding ‘thunk’. By far the biggest improvement is getting a whole new level of isolation within the car, which makes long trips so much more tolerable and the daily commute so much more relaxing. I would 100% do this again.
The project
Okay, let’s get to the project itself! I’ve broken up each area of the car into separate sections. As the write-ups below are fairly comprehensive, there is no need for me to reinvent the wheel.
Doors
This link contains pictures and instructions, very clearly detailed, on how to do the doors. I did the rear doors first to get used to working with all the materials, then the trunk, then the interior of the car. I would suggest following these instructions.
https://imgur.com/a/2018-mazda-3-sound-deadener-install-vE1o9Hi
Before taking apart your doors, also read through this thread as it contains some more details and information that you will find useful.
https://www.mazda3revolution.com/threads/sound-deadening.126105/?post_id=1624345&nested_view=1&sortby=oldest#post-1624345
This thread is also good to read as it is very detailed. It is for the previous generation, but the door design has not changed that much compared to our generation.
https://www.mazda3revolution.com/threads/cheaply-and-effectively-sound-deadening-your-2010-2013-mazda3.111385/
Wheel arches
Use these links and instructions for the wheel arches
https://www.mazda3revolution.com/threads/sound-deadening.126105/page-2
As well as the Imgur gallery from the Doors section for some more pictures.
Trunk
This is the easiest part of the whole project. If you’ve read the threads above, you don’t need any help with this. I did not do the hatch door. I do not think that is worth it, because if your trunk area is well insulated and you have your rear seat up, there’s not a lot of noise that’s going to get through the hatch door.
Interior
This is the part of the project that I had to figure out on my own, so I want to give several tips that will make it easier if you’re doing this.
~1. Removing the interior carpet:~
First vacuum the carpet.
You don't need to remove the entire console to get access to the majority of the floor. To remove the interior carpet, first remove the rear seat, then the front seats, then the interior plastic trim, and finally there are some pieces of Styrofoam in the front wheel wells. You can pull up the carpet for the left side of the vehicle as you work on that side, then tack it all down, and repeat for the right side of the vehicle.
~2. Removing the front seats~
First, disconnect the battery using the 10mm socket. This is recommended by the manufacturer to prevent accidental discharge of the air bags.
If you have the E-torx size 12 socket, removing the seat bolts is a breeze. I zipped them right off. Undo the back bolts, then slide the seat to its rearmost position, then remove the front bolts. Roll the seat onto it’s back to access the harness, undo the harness, then remove the front seat either from the front or rear door. It doesn’t matter.
Go to this site and download the PDF that Anchorman posted. That is all you need to know to remove the front harness. It took me HOURS of searching the web to find a resource this good – there aren’t even any good videos demonstrating what the PDF shows. https://www.cx3forum.com/threads/drivers-seat-removal.17234/
This was both the easiest and hardest thing about the project. Where I got stuck was removing the wiring harness from underneath the seat. Don’t be like me and stick a screwdriver in there, because that can damage the plastic. Instead, simply lift the white tab, press the tab underneath, and the harness comes off nice and easy. The link above with the PDF by Anchorman is what I WISHED I had at the start. I hope this will make it much easier for you.
Don’t be worried about the airbag going off etc. Using the diagram in the PDF, it’s just 1 harness and it comes off super easy and clips back in super easy too. It’s idiot-proof. You won’t have any trouble.
~3. Remove the interior plastic trim~
Again, watch this video https://www.youtube.com/watch?v=Aat4kUanm9w to see how to remove the trim and in what order. It’s actually quite easy and easy to reinstall as well. Just remember that the front and rear passenger scuff plates go on last. The other interior trim, does not matter what order you reinstall it.
Another tip, when removing the furthermost front inside trim (i.e the fusebox cover) and its equivalent on the front passenger side, there is a plastic nut securing that trim in place at the very front of it. It’s hard to see in there. Simply reach your hand in there, find the nut, and lefty-loosen it all the way until it comes off. Easy peasy!
~4. Remove the carpet~
You can pull up the carpet one side at a time. I recommend starting with the left side. In one area only, I cut through my carpet in order to remove it on the rear passenger areas, where it is affixed underneath the front seatbelt holder. This is not a problem. It was just easier this way, and because that area gets covered up by plastic trim, it doesn’t matter if you cut through it to make your life easier.
Once the carpet is lifted up, vacuum underneath it to ensure you have a clean surface that your butyl will adhere to.
~5. Do the driver’s side first!~
The front left side of the vehicle floor is the hardest to do because you have to contend with the footrest, reaching underneath the steering wheel, and the gas pedal. I removed the accelerator pedal – it is just held in place by two 10mm nuts, and then an electrical harness that easily clips off. Remove it and set it aside. Then, lift the carpet and remove the Styrofoam. Use a needlenose plyer to help unclip the plastic portion holding the Styrofoam in place. I did not end up reinstalling that plastic piece, as I installed sound deadener where it would have plugged into the floor. No harm.
I suggest doing the driver’s side first because once you’re done that front left area, the rest of the car is super easy. So do this while you’re fresh. Try to cover as much as you can in the front wheel wells, because that is a significant area of incoming road noise. Be systematic about cutting the butyl and closed cell foam in the correct sizes here, as you will have to reinstall the gas pedal, the Styrofoam, and the carpet properly. The good news is that it’s all easy to reinstall. I didn’t have any trouble.
Once you’re done with the driver’s compartment, systemically work your way with large butyl sheets and closed cell foam through the rest of the car floor. There is no need to apply this stuff up where the plastic trim will be reinstalled, on the inside lateral frame of the car – if you do so, it might be more difficult to reinstall the carpet and the plastic trim. Just do the flat bottom floor only, and you can hold the carpet up to access up along the centre console as well. (Keep in mind this is written for someone with my skill level – i.e newb. If you are more advanced and know what you’re doing, then go ahead and put some butyl or CCM in the inside lateral area, the area otherwise covered up with plastic trim).
I did not go for 100% coverage. To do that would take a lot longer. I went for about 90% coverage with the butyl and closed cell foam, and the rubber Technoflex layers covered up pretty well 95% of the area.
When you are laying the material down, ensure not to cover the holes for the seat bolts. If you do by accident, no worries – just use a screwdriver to poke through them, and you can easily still thread the bolt through when you go to reinstall your front seats.
Repeat the same steps on the right side of the vehicle.
~6. Reinstall the plastic trim.~
First reinstall the carpet and ensure all the holes line up. Reinsert the plastic clips into the holes to hold the carpet in place. Then, reinstall the frontmost trim piece, ensuring it clicks into place, and finally screw the plastic nut on. You may need to lift the rubber insert around the door to replace the plastic trim properly – the rubber insert comes off and goes on very easily, it is very forgiving to work with.
Then, install the B pillar trim piece. Then, the inside rear trim piece. Finally, the scuff plates, front and rear.
~7. Reinstall the front seats.~
~8. Reinstall the rear cushion.~
~9. Plug in the battery again.~
You’re done! Go for a rest drive and let the results speak for themselves!
Final thoughts
I did not take pictures because I was too busy installing the stuff and there are plenty of pictures available on the various threads.
I did reach out to many people on the forum and on Reddit who have done this project and from everything that I’ve learned, I believe this should be all you need to know to do this project successfully.
It will take several days so set some time aside. Here are some rough estimates:
submitted by PinballPounce to mazda3 [link] [comments]
Like others undertaking this project, I did a ton of research on sound deadening, the process, and the products first before jumping in. I would encourage anyone pursuing the same project to read through the links I’ve included in this write-up as they should give you all the information you need to sound-deaden your car in a comprehensive, easy manner, without having to do the weeks of research I had to do.
Pre-reading:
If you haven’t already, read through this thread for background as this is a solid, comprehensive write-up.
https://www.mazda3revolution.com/threads/sound-deadening-my-17-mazda-3-bn.242072/
Materials Needed:
1. Butyl-based mat to apply first as your base layer
I used 72 square feet to do the entire car, including hood, wheel wells, full interior, rear hatch area, and all doors. I did not do the headliner.
Total cost: $200 CAD
I used 1 box of 2mm (80 mil) Kilmat, and 1 box of 2.5mm Amazon branded butyl sheets. I found the Kilmat had better adhesion and was easier to cut and work with, because of the smaller sheet sizes, so I used this for tight spaces and the doors. The Amazon stuff was great to apply to large areas such as the floor of the vehicle, because I would just stick one entire sheet down and be done with it. It’s also slightly cheaper than the Kilmat.
Other brands: Silless, which manufactures the closed cell foam, also makes this stuff for a reasonable price.
2. Closed cell foam as the second layer
I used 100 square feet.
Total cost: $200
I did a LOT of research and shopping around to find the best balance between price, value, and performance of closed cell foam. I ultimately landed on using Siless Liner 157mil (4mm) closed cell foam which I found on Amazon. Noico is also another brand that makes this stuff for slightly more cost. These come in boxes of 51 square feet for about $100. I thus bought two boxes of the stuff. I did end up with leftover product, which I have saved as it can be used to stick on anything else that causes noise such as a furnace, washing machine, etc along with the leftover butyl mat.
3. Rubber-based floor underlay as the final layer
I used a 100 square foot roll of Technoflex Underlayment Acoustic Membrane, 2mm thickness.
Total cost: $85
Product link: https://www.rona.ca/en/product/technofloor-technoflex-underlayment-acoustic-membrane-thermal-insulation-4-ft-x-25-ft-x-008-in-100-sqft-rubber-material-black-m2000-100-73015020
Alternate link: https://technoflexintl.com/en/product/technofloor-acoutstic
Other products I considered, but chose against as the Technoflex is thicker
- https://www.rona.ca/en/product/mono-serra-zito-200-ft2-15-mm-blue-high-density-foam-underlayment-for-vinyl-floors-fm-906-84666069
- https://www.rona.ca/en/product/selitbloc-griptec-subfloor-underlay-pressure-resistent-foam-48-in-w-x-25-ft-l-100-sqft-15-mm-thickness-blue-gold-a64305-05075003
Please note, this product is not adhesive. You lay it down like a blanket and you need to cut it to fit in tight spaces. Thus, I did not use it in vertical areas like the doors. I only used it on the floor and trunk of the vehicle. I am not technically inclined enough to adhere or screw it on the doors, but there are other people in the links on this thread who have done so, so depending on your skill level it is certainly possible.
All Tools Required
- Socket set with 10mm socket and a Phillips screwdriver. I purchased a full socket set because I did not have one and found one on sale.
- E-torx socket size 12 to remove the front seats. I just purchased a set of 8 for $20
- Trim removal tool and plastic clip replacements, approx. $20. Extremely useful!!
- https://www.amazon.ca/dp/B01N9AL149?psc=1&ref=ppx_yo2ov_dt_b_product_details
- The metal trim removal tool is worth its weight in gold. Trust me, there are a LOT of plastic trim pieces to remove, and this tool makes them very easy to remove properly without breaking anything. All cars nowadays use plastic trim, so it’s a worthwhile purchase if you’re ever going to do work on any future car as well.
- I purchased the set above because it came with a whole array of trim removal tools as well as a huge variety of replacement plastic trim pieces. I ended up using a couple pieces that broke when I did the doors. The kit has everything you may need for most vehicles, including our Mazdas.
- Rubber roller, $12. Useful for rolling down the butyl mat and closed cell foam.
- Do yourself a favor and get some gloves. I used my bare hands for about 50% of the time, and they were sore, and had little nicks and cuts all over them by the time I was done. Much easier with gloves.
I have a general interest in cars but the most technical work I’ve ever done are oil changes and tire swaps. This was the largest and most technical project I ever embarked on. I work an office job, so I don’t even work with my hands a lot. If I can do it, so can you (as long as you set aside the time and have the proper tools).
Results
I did not take before-after videos, as that has been captured by videos on Youtube as well as people who have measured the noise levels in the threads below. All I can tell you is that this does work. In my opinion, the project even for a newb like me is totally worth it. For less than $500, and a couple days of work, you can make your Mazda feel like an entirely different vehicle.
Now, sounds and vibrations are barely transmitted going over rough roads. The car feels so much more planted and stable when going over bumps. The audio system sounds better. The doors close with a rich-sounding ‘thunk’. By far the biggest improvement is getting a whole new level of isolation within the car, which makes long trips so much more tolerable and the daily commute so much more relaxing. I would 100% do this again.
The project
Okay, let’s get to the project itself! I’ve broken up each area of the car into separate sections. As the write-ups below are fairly comprehensive, there is no need for me to reinvent the wheel.
Doors
This link contains pictures and instructions, very clearly detailed, on how to do the doors. I did the rear doors first to get used to working with all the materials, then the trunk, then the interior of the car. I would suggest following these instructions.
https://imgur.com/a/2018-mazda-3-sound-deadener-install-vE1o9Hi
Before taking apart your doors, also read through this thread as it contains some more details and information that you will find useful.
https://www.mazda3revolution.com/threads/sound-deadening.126105/?post_id=1624345&nested_view=1&sortby=oldest#post-1624345
This thread is also good to read as it is very detailed. It is for the previous generation, but the door design has not changed that much compared to our generation.
https://www.mazda3revolution.com/threads/cheaply-and-effectively-sound-deadening-your-2010-2013-mazda3.111385/
Wheel arches
Use these links and instructions for the wheel arches
https://www.mazda3revolution.com/threads/sound-deadening.126105/page-2
As well as the Imgur gallery from the Doors section for some more pictures.
Trunk
This is the easiest part of the whole project. If you’ve read the threads above, you don’t need any help with this. I did not do the hatch door. I do not think that is worth it, because if your trunk area is well insulated and you have your rear seat up, there’s not a lot of noise that’s going to get through the hatch door.
Interior
This is the part of the project that I had to figure out on my own, so I want to give several tips that will make it easier if you’re doing this.
~1. Removing the interior carpet:~
First vacuum the carpet.
You don't need to remove the entire console to get access to the majority of the floor. To remove the interior carpet, first remove the rear seat, then the front seats, then the interior plastic trim, and finally there are some pieces of Styrofoam in the front wheel wells. You can pull up the carpet for the left side of the vehicle as you work on that side, then tack it all down, and repeat for the right side of the vehicle.
~2. Removing the front seats~
First, disconnect the battery using the 10mm socket. This is recommended by the manufacturer to prevent accidental discharge of the air bags.
If you have the E-torx size 12 socket, removing the seat bolts is a breeze. I zipped them right off. Undo the back bolts, then slide the seat to its rearmost position, then remove the front bolts. Roll the seat onto it’s back to access the harness, undo the harness, then remove the front seat either from the front or rear door. It doesn’t matter.
Go to this site and download the PDF that Anchorman posted. That is all you need to know to remove the front harness. It took me HOURS of searching the web to find a resource this good – there aren’t even any good videos demonstrating what the PDF shows. https://www.cx3forum.com/threads/drivers-seat-removal.17234/
This was both the easiest and hardest thing about the project. Where I got stuck was removing the wiring harness from underneath the seat. Don’t be like me and stick a screwdriver in there, because that can damage the plastic. Instead, simply lift the white tab, press the tab underneath, and the harness comes off nice and easy. The link above with the PDF by Anchorman is what I WISHED I had at the start. I hope this will make it much easier for you.
Don’t be worried about the airbag going off etc. Using the diagram in the PDF, it’s just 1 harness and it comes off super easy and clips back in super easy too. It’s idiot-proof. You won’t have any trouble.
~3. Remove the interior plastic trim~
Again, watch this video https://www.youtube.com/watch?v=Aat4kUanm9w to see how to remove the trim and in what order. It’s actually quite easy and easy to reinstall as well. Just remember that the front and rear passenger scuff plates go on last. The other interior trim, does not matter what order you reinstall it.
Another tip, when removing the furthermost front inside trim (i.e the fusebox cover) and its equivalent on the front passenger side, there is a plastic nut securing that trim in place at the very front of it. It’s hard to see in there. Simply reach your hand in there, find the nut, and lefty-loosen it all the way until it comes off. Easy peasy!
~4. Remove the carpet~
You can pull up the carpet one side at a time. I recommend starting with the left side. In one area only, I cut through my carpet in order to remove it on the rear passenger areas, where it is affixed underneath the front seatbelt holder. This is not a problem. It was just easier this way, and because that area gets covered up by plastic trim, it doesn’t matter if you cut through it to make your life easier.
Once the carpet is lifted up, vacuum underneath it to ensure you have a clean surface that your butyl will adhere to.
~5. Do the driver’s side first!~
The front left side of the vehicle floor is the hardest to do because you have to contend with the footrest, reaching underneath the steering wheel, and the gas pedal. I removed the accelerator pedal – it is just held in place by two 10mm nuts, and then an electrical harness that easily clips off. Remove it and set it aside. Then, lift the carpet and remove the Styrofoam. Use a needlenose plyer to help unclip the plastic portion holding the Styrofoam in place. I did not end up reinstalling that plastic piece, as I installed sound deadener where it would have plugged into the floor. No harm.
I suggest doing the driver’s side first because once you’re done that front left area, the rest of the car is super easy. So do this while you’re fresh. Try to cover as much as you can in the front wheel wells, because that is a significant area of incoming road noise. Be systematic about cutting the butyl and closed cell foam in the correct sizes here, as you will have to reinstall the gas pedal, the Styrofoam, and the carpet properly. The good news is that it’s all easy to reinstall. I didn’t have any trouble.
Once you’re done with the driver’s compartment, systemically work your way with large butyl sheets and closed cell foam through the rest of the car floor. There is no need to apply this stuff up where the plastic trim will be reinstalled, on the inside lateral frame of the car – if you do so, it might be more difficult to reinstall the carpet and the plastic trim. Just do the flat bottom floor only, and you can hold the carpet up to access up along the centre console as well. (Keep in mind this is written for someone with my skill level – i.e newb. If you are more advanced and know what you’re doing, then go ahead and put some butyl or CCM in the inside lateral area, the area otherwise covered up with plastic trim).
I did not go for 100% coverage. To do that would take a lot longer. I went for about 90% coverage with the butyl and closed cell foam, and the rubber Technoflex layers covered up pretty well 95% of the area.
When you are laying the material down, ensure not to cover the holes for the seat bolts. If you do by accident, no worries – just use a screwdriver to poke through them, and you can easily still thread the bolt through when you go to reinstall your front seats.
Repeat the same steps on the right side of the vehicle.
~6. Reinstall the plastic trim.~
First reinstall the carpet and ensure all the holes line up. Reinsert the plastic clips into the holes to hold the carpet in place. Then, reinstall the frontmost trim piece, ensuring it clicks into place, and finally screw the plastic nut on. You may need to lift the rubber insert around the door to replace the plastic trim properly – the rubber insert comes off and goes on very easily, it is very forgiving to work with.
Then, install the B pillar trim piece. Then, the inside rear trim piece. Finally, the scuff plates, front and rear.
~7. Reinstall the front seats.~
~8. Reinstall the rear cushion.~
~9. Plug in the battery again.~
You’re done! Go for a rest drive and let the results speak for themselves!
Final thoughts
I did not take pictures because I was too busy installing the stuff and there are plenty of pictures available on the various threads.
I did reach out to many people on the forum and on Reddit who have done this project and from everything that I’ve learned, I believe this should be all you need to know to do this project successfully.
It will take several days so set some time aside. Here are some rough estimates:
- Trunk: 2 hours
- Each door: 2-3 hours (first door will take longer, then each door after gets shorter and shorter)
- Wheel wells: 2 hours
- Inside Hood: 1 hour
- Interior: 9 hours. Set aside a full day for this. You will want to take breaks in between steps. It took me from 10am to 8pm.
2024.05.19 06:56 Significant-Tower146 Best Canopy Tents with Sides
 | submitted by Significant-Tower146 to u/Significant-Tower146 [link] [comments] https://preview.redd.it/hx0vrgiudb1d1.jpg?width=720&format=pjpg&auto=webp&s=1a7b7004c1fb33ee901557c44857f0eb63617caf Looking for a versatile and functional shelter for your outdoor events? Look no further than canopy tents with sides! These tents offer both protection from the elements and privacy, making them perfect for a variety of occasions. In this article, we'll explore some of the top choices in canopy tents with sides to help you find the perfect solution for your needs. From family gatherings to professional events, a canopy tent with sides can provide the ideal space for comfort and enjoyment. Stay tuned as we delve into the world of these practical and stylish shelters, covering everything from features to user reviews, to help you make an informed decision that's sure to impress your guests and keep everyone protected from the unpredictable weather. The Top 18 Best Canopy Tents with Sides
Reviews🔗White 10x20 Party Wedding Tent Canopyhttps://preview.redd.it/fria1fzvdb1d1.jpg?width=720&format=pjpg&auto=webp&s=d3d4762de97009f4b20572223f58fbf09b05b2da As a reviewer who has had the opportunity to use this 10 ft. x 20 ft. White Party Wedding Tent Canopy with 4 Sidewalls and 2 Doors, I can confidently say that it's been an exceptional choice for our events. The ease of assembly is one of the key features that stood out for me. With its smart workmanship and high-class cloth top and iron tubes, setting it up took no time at all. Another brilliant feature that I absolutely loved is its large space. It comfortably accommodated many people and stuffs, making it perfect for big gatherings like weddings or parties. The outstanding waterproof performance also makes it suitable for outdoor usage, which is a bonus. One minor issue I encountered was a slight instability during windy days. However, the spiral interface between the tubes in its design has made the overall frame more stable, providing a secure environment even during unpredictable weather conditions. All in all, this tent is a great addition to any event, whether it be a wedding, camping, parking, or a simple party. It's the assembled tent that comes with necessary accessories, making it convenient to carry around on a daily basis. In summary, this 10 ft. x 20 ft. White Party Wedding Tent Canopy is a versatile, space-efficient, and easy-to-assemble option that doesn't compromise on elegance. 🔗10 ft. x 20 ft. Heavy-Duty Canopy Event Tent Outdoor White Gazebo Party Wedding Tent with 4 Removable Sidewallshttps://preview.redd.it/ent04k7wdb1d1.jpg?width=720&format=pjpg&auto=webp&s=17fb7b1dcbf69efd08fa2395d781db3a1ecdda3c Oh, you know when you're planning that big BBQ party in your backyard and you want your guests to feel as comfortable as possible? Or maybe you need a waterproof shelter for those unexpected rain showers during a camping trip? Well, I just had the chance to try out this 10 ft. x 20 ft. white gazebo party tent, and let me tell you, it's perfect for both! The first thing that caught my eye was its high-grade PE cloth top and iron tubes. The smart workmanship and reasonable design make it not only incredibly stylish but also incredibly easy to put together. You know how some tents can be a real hassle to assemble? Not this one! It only took me a few minutes, and I was good to go! It's like having your own little pop-up fortress. One thing I definitely appreciated was the spacious room it provides. I had plenty of space to add a few tables and chairs for my guests, and it didn't feel cramped at all. And speaking of guests, the tent's high-grade materials make sure that everyone stays comfortable, no matter what the weather's like outside. It's like your own personal oasis, except instead of palm trees, you've got a sleek, white tent! Of course, no product is perfect, and this one is no exception. One small issue I encountered was that the tent can be a bit challenging to take down on your own, especially if you're in a hurry. I also found that the sidewalls can be a bit difficult to remove and reattach, so make sure you give yourself ample time when disassembling the tent. Overall, I would highly recommend this 10 ft. x 20 ft. white gazebo party tent, especially for anyone who's looking for a stylish, high-quality outdoor shelter that's easy to assemble and provides plenty of room for guests. Just make sure you've got a buddy to help you with the take-down process! 🔗10'x20' Waterproof Canopy Tent with Sidewallshttps://preview.redd.it/ws73h1mwdb1d1.jpg?width=720&format=pjpg&auto=webp&s=16a7992c3999a8fb04ac10c4126e2c8e12cdc939 I recently purchased a Costway 10'x20' Canopy Tent for a backyard party, and I must say, it exceeded my expectations. The tent was easy to set up with the help of my family and friends, and it provided ample shade from the summer sun. The highlight of this tent is its rust-resistant steel frame and durable waterproof polyethylene fabric, which make it perfect for withstanding various weather conditions. One of the standout features for me was the ease of installation. We were able to have it up and ready within a short period, ensuring that our guests were protected from the elements. The canopy also provided a nice wind block, which came in handy during occasional gusts. In terms of aesthetics, the canopy tent is quite appealing, with a sleek design that adds a touch of elegance to any event. The quality of the sewing is meticulous, contributing to the overall durability of the tent. Additionally, the tent comes with a carrying bag, making it easy to transport and store when not in use. However, there are some cons to consider. Some users reported issues with the durability of the tent, with signs of wear and tear after a few uses. There were also concerns about the product's weather resistance, as it may not withstand stronger gusts of wind or heavy rainfall. In conclusion, the Costway 10'x20' Canopy Tent is a great choice for those looking for a sturdy and stylish shelter for their outdoor events. While some users have reported durability concerns, overall, the tent has received positive reviews from many satisfied customers. I would definitely recommend it for commercial or recreational use, such as parties, weddings, flea markets, and backyard events. 🔗10x20 Pop-Up Event Tent with Removable Mesh Sidewallshttps://preview.redd.it/98kx8twwdb1d1.jpg?width=720&format=pjpg&auto=webp&s=da42dffedc4224e222006bc73dddbc411538c5de In my recent outdoor event, I had the pleasure of using the Outsunny Canopy Tent Gazebo. The first thing I noticed was how easy it was to set up. The rust-resistant steel frame held its own against some gusty wind, providing a safe and spacious shelter for my guests. One of the standout features was the 4 removable mesh walls. They allowed for an open-air feel while also offering protection from bugs and wind. The water-resistant roof provided great coverage and helped reflect UV rays, keeping everyone cool and safe from the sun. However, this tent isn't perfect. It can be a pain to take down, especially on windy days when the mesh walls flap around. Additionally, it's not very weather-resistant in heavy rain or strong winds. I learned this the hard way when a sudden downpour brought the party to an abrupt end as the tent collapsed. Overall, the Outsunny Canopy Tent Gazebo is great for casual events or gatherings. Its ease of setup and breathable mesh walls make it a comfortable choice. However, its lack of durability and poor weather resistance might be a deal-breaker for those planning more intense outdoor events or using it in unpredictable weather conditions. I hope my experience gives you a better understanding of this product. If you have any questions or need more information, please don't hesitate to ask. 🔗10x20 Traditional White Wedding Party Tent Canopyhttps://preview.redd.it/ml7f3xaxdb1d1.jpg?width=720&format=pjpg&auto=webp&s=2d084fb94efe190ff6926dacafa00d058b44a57e As a reviewer who has been using the Winado 10 ft x 20 ft White Party Wedding Tent Canopy with 4 Sidewall and 2 Doors for several events, I can definitely say it's been a game-changer. The high-grade cloth top and iron tubes provide a robust structure that has withstood countless storms and windy days, ensuring my guests remain comfortable and dry. One of the standout features is its ease of assembly. Even with limited experience, I could quickly set up this tent. The spiral interface between the tubes adds additional stability to the overall frame. Plus, the large space it provides is perfect for accommodating many people and their belongings. However, there were some cons to consider. The lack of waterproof rating could be an issue in heavy rainfall. And while it's suitable for various occasions, the weight of the tent can be a bit cumbersome for solo setups. In conclusion, the Winado Tent Canopy has been a reliable addition to my event planning toolkit. It boasts a sturdy structure, spacious interior, and easy assembly. Despite the cons, I'd recommend it for anyone in need of a reliable tent for their next gathering. 🔗White 10 ft. x 30 ft. Wedding Party Tent with 6 Sides and 2 Doorshttps://preview.redd.it/c4njvvmxdb1d1.jpg?width=720&format=pjpg&auto=webp&s=de88fe289cfbc4e9c6af230b41712851f5d57385 I had the opportunity to use this beautiful 10 ft. x 30 ft. White Party Wedding Tent Canopy for my cousin's wedding, and it was an absolute game-changer! Its elegant design and spacious interior provided the perfect setting for our guests to dance the night away. The ease of setup and breakdown was a major plus, allowing us to focus on the more important aspects of the event. One thing that really stood out was the sturdiness of the structure, with its high-grade PE cloth top and iron tubes. Even on a slightly breezy day, it held up surprisingly well. However, I must say that it's not the best choice for super windy or rainy conditions, so make sure to secure it properly. The sidewall and two doors were also an excellent touch, providing that extra layer of privacy and protection from the elements. Plus, the fact that it can accommodate up to 300 square feet of space means you won't have to worry about cramming everyone inside! In summary, this Wedding Tent Canopy was a fantastic addition to our event, transforming a simple backyard into a magical, elegant space. While it may not be ideal for windy or rainy situations, its overall quality and spacious design make it a great choice for those looking to elevate their next outdoor gathering. 🔗10 ft. x 30 ft. White Party Wedding Tent Canopyhttps://preview.redd.it/emntak6ydb1d1.jpg?width=720&format=pjpg&auto=webp&s=760063eb2610e1cd1e9e638dbf00391e026105c2 I recently purchased the Winado 10 ft. x 30 ft. White Party Wedding Tent Canopy with 5 Sidewalls for an outdoor event. The tent was surprisingly easy to set up following the instructions, and it looked elegant draped in white. I was also impressed by how spacious the interior was, providing ample space for guests. However, on a slightly windy day, the stability of the tent became a concern as the structure wasn't as sturdy as I'd hoped. Despite this, the tent did offer protection from light rain. Overall, while the Winado Wedding Tent Canopy is beautiful and functional for various occasions, it may not be the best choice for events held in windy conditions. 🔗Outdoor White Metal Party Tent with Zippered Windowshttps://preview.redd.it/cbiq1peydb1d1.jpg?width=720&format=pjpg&auto=webp&s=9a51e9f073ceb73738099048cfd989182c03c3ac As an avid party planner, I must say that the Outdoor Metal White Party Tent with Windows - 13 x 26 has been a game-changer for my events. It's a multi-functional shelter that provides both shade and protection from the elements, making it perfect for commercial and recreational use. From weddings and graduations to picnics and backyard parties, this tent truly is a versatile choice. One of the standout features of this tent is its high-quality, heavy-duty white powder-coated steel structure. It's rust and corrosion-resistant and delivers strong support with its 1.5-inch steel tube diameter and 1.66-inch metal connector diameter. Additionally, the thick base offers immense stability and durability for outdoor activities. The 100% waterproof top uses a 140g PE cloth that keeps guests dry in case of rain. Meanwhile, the removable sidewalls with zippers allow for great cross-ventilation on hot summer days. These sidewalls also block 99% of harmful UV rays, making them perfect for sunny afternoons. The 160-gram PVC windows provide more brightness and a modern look to the tent. Storing and reusing this tent is hassle-free, thanks to the extra durable 3 x 600D Oxford fabric storage bags included. For added stability on different surfaces, both ground nails and expansion screws are provided. However, it's essential to take preventative measures when wind speeds reach 25 mph or higher. A few safety reminders include never leaving the tent up overnight or in bad weather conditions. Also, note that the polyethylene fabric is non-fireproof, so always keep it away from sources of fire. To ensure the best experience, safety measures and professional installation are highly recommended. While the Outdoor Metal White Party Tent with Windows - 13 x 26 has been a wonderful addition to my event planning toolkit, it does have a few drawbacks. The initial setup can be time-consuming, and the weight of the components may make it difficult for one person to handle alone. Additionally, the requirement for additional support structures in windy conditions adds to the complexity of using the tent. Overall, this tent offers great value and functionality for a variety of outdoor events. Its weather resistance, durability, and versatility make it a worthwhile investment for anyone looking to enhance their event experience. 🔗15' x 15' Canopy Tent Blockout Sidewall Kithttps://preview.redd.it/sudhfezydb1d1.jpg?width=720&format=pjpg&auto=webp&s=8f7c4f161f23519e28879fbbf0a8a8107271c5a0 Imagine the disappointment of having your perfectly planned backyard event ruined by sudden rain or unpredictable wind. Our 15' x 15' Premium Blockout Sidewall Kit is here to save the day, designed to help you weather the unexpected and keep your guests comfortable in any situation. Constructed from 16oz premium blockout PVC vinyl, these sidewalls boast impressive UV resistance and 100% waterproofing. They come in your choice of cathedral or window sidewalls, allowing you to control not only the elements but also the level of privacy and visibility you desire. One unique feature of our sidewalls is the strapping for staking and securing to the ground, ensuring they stay in place regardless of the weather conditions outside. However, it's important to note that these sidewalls are not recommended for staking during heavy winds, as this could potentially damage your event equipment. In summary, our 15' x 15' Premium Blockout Sidewall Kit is a reliable and versatile solution for creating a comfortable and private space at your next outdoor event. While they offer excellent protection from the sun and rain, it's crucial to take extra care during heavy winds to ensure their longevity and effectiveness. 🔗10'x10' Canopy Wedding Party Tent Gazebo with 4 Side Wallshttps://preview.redd.it/p4l0h0azdb1d1.jpg?width=720&format=pjpg&auto=webp&s=10464a780775e35a1f7cb1bccd3bdb199ac7e634 I recently used the Segawe 10'x10' Canopy Party Tent for a backyard wedding, and it was quite an experience. The first thing that caught my eye was the elegant design with four side walls, giving our event a private and elegant touch. However, the build quality wasn't as sturdy as I expected. The metal poles didn't feel very strong, which was a bit concerning. To my relief, the canopy itself is made of high-quality 90G/M2 PE material, providing excellent shelter from the sun and rain. The 4 side walls came in handy for added privacy during our intimate gathering, but they didn't offer much in terms of stability. It would have been even better if the structure had some kind of locking mechanism to make it sturdier. Despite its flaws, this gazebo pavilion did its job for our one-off event. And considering the affordable price, it might be worth considering if you're in need of a temporary shelter with side walls for your next gathering. Just keep in mind that you might need to reinforce the structure yourself to ensure it doesn't collapse in strong winds. 🔗White 10x10 Pop-Up Canopy Tent with Sideshttps://preview.redd.it/j35nk220eb1d1.jpg?width=720&format=pjpg&auto=webp&s=2632ed015e8a1855d838dcd9e90f06f2b285a1ae Once upon a time, I decided to throw a beach-themed party in my backyard. I wanted to create the perfect atmosphere for my guests, so I opted for a Canopy Tent with Sides to provide shade and protection from the elements. As I began setting it up, I was struck by how easy it was to assemble - no tools required! The structure felt sturdy and reliable, which instantly put my concerns about wind or rain at bay. One feature that stood out was the adjustable height. It allowed me to accommodate taller guests comfortably while still providing ample space beneath the canopy. The white color of the tent not only matched my nautical theme perfectly but also helped reflect sunlight, keeping the area cooler on a hot summer day. However, there were some cons that need addressing. Firstly, the lack of a storage bag meant I had to find extra storage space for all the parts when the party was over. Additionally, despite the waterproof top cover, there wasn't enough ventilation, making it quite stuffy inside during the peak afternoon sun. In conclusion, while the Canopy Tent with Sides proved to be an excellent addition to my outdoor event, some improvements could enhance its appeal further. I'd recommend adding a storage bag and improving airflow for those sweltering summer days. 🔗Versatile Pop-up Canopy Tent with UV Protectionhttps://preview.redd.it/7qn6n0b0eb1d1.jpg?width=720&format=pjpg&auto=webp&s=bdc3bca70259f6a148b8f02a4f6a5ee3c67e6b30 I recently used the Outsunny Pop Up Canopy Tent for a family gathering in our garden, and it certainly proved to be a lifesaver. The sturdy construction and large size provided ample shade and shelter during the hot summer day, while the sidewalls and doors ensured that we were well protected from any wind gusts. The assembly process was quite smooth, taking just a few minutes with the help of a friend, and the included wheels made it easy to maneuver and set up in different locations. One standout feature of this tent is its durability. After weeks of use, it still looks brand new, and I'm confident that it'll continue to provide reliable protection from the elements for many more gatherings to come. However, one issue that I encountered with the tent is that it can be a bit heavy when it's time to pack up and move it to another location. Overall, the Outsunny Pop Up Canopy Tent has been an excellent addition to our outdoor entertaining repertoire, offering both style and substance for a wide range of occasions. 🔗Stylish Convertible Sleeper Chair for Modern Spaceshttps://preview.redd.it/e5rdrvq0eb1d1.jpg?width=720&format=pjpg&auto=webp&s=1a286a29b8c8ff83ac751ce7bfad29dbfa6f972b As a frequent party planner, I recently stumbled upon this 10x30' Party Canopy Tent and it has been a game-changer. The heavy-duty steel frame is not only sturdy but also lightweight, ensuring longevity and easy transport. The high-quality polyethylene roof and sidewalls are tear-resistant, waterproof, and offer UV protection. I appreciate the additional ropes and stakes provided for added stability during those windy days. The large interior space can comfortably accommodate around 50 people, making it perfect for various occasions like weddings, birthday parties, or family gatherings. The eight removable sidewalls with windows provide ample shade and privacy. It's also incredibly versatile - great for picnics, barbecues, or even as a temporary shelter for your car. While the assembly instructions are quite straightforward and can be completed in about 15 minutes, it does require some patience and steady hands to ensure the frame is steady before placing the cover. Overall, this Party Canopy Tent has definitely become a staple in my event planning toolkit. Buyer's Guidehttps://preview.redd.it/nclifdj3eb1d1.jpg?width=720&format=pjpg&auto=webp&s=292cd0ac3d8cac018ef2c91562455d747c054134
FAQhttps://preview.redd.it/ou4e6yu3eb1d1.jpg?width=720&format=pjpg&auto=webp&s=d3c6e069bc069d6c433c880da0dcf6f5ba396573 What are canopy tents with sides?Canopy tents with sides, also known as instant tents or frame tents, are tents designed with extended walls on all four sides for added protection and enhanced privacy. These tents are typically made of waterproof and UV-resistant materials, and they provide shelter from sun, wind, and rain.What are the benefits of using a canopy tent with sides?https://preview.redd.it/8a63dqd4eb1d1.jpg?width=720&format=pjpg&auto=webp&s=5f24d519907a3f0d3f086a06aeee1cae75b5ed0f Some benefits include:
How do I choose the right size canopy tent with sides for my needs?Consider factors like the number of people you'll be hosting, the amount of gear you need to store, and the available space. Standard sizes are typically 10x10, 10x15, and 15x15 feet, but some tents may have custom dimensions. https://preview.redd.it/4rlsljo4eb1d1.jpg?width=720&format=pjpg&auto=webp&s=5348d9f078ac39ec8056534c9fe96a8a14d51d31 What features should I look for in a quality canopy tent with sides?Some important features include:
How do I set up a canopy tent with sides?Follow these general steps:
How do I care for and maintain a canopy tent with sides?Some tips include:
How long do canopy tents with sides typically last?The lifespan of a canopy tent with sides can vary, but with proper care and maintenance, they can last for several years or longer.Can I use a canopy tent with sides for camping, events, or beach outings?Yes! Canopy tents with sides are versatile and can be used for various occasions, including camping, picnics, tailgating, outdoor events, beach outings, and even at home for providing shade in your backyard.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.19 03:38 Anything-Unable Sooo... I opened a box and made a friend! (Boxpost)
 | Hey guys! Sorry for being a ghost after teasing an unboxing. Turns out, a lot of you were correct about the nature of the box. I'll try to retell the event to you now that I'm in a position to comfortably do so. submitted by Anything-Unable to wizardposting [link] [comments] Several minutes of fiddling with moving segments pass before an audible click rings out. Half of the puzzle raises and twists on its own before dropping into place. Waves of light emanate from the box as the candles in the room are snuffed out. Within the darkness, the light emitted from the box forms the shape of a tall pale man. Looking down on us with a disinterested gaze, the man spoke thus: "Two travelers looking to experience the summit of sensation. I shall be your guide." Waving my hand, the candles were relit and my tools began to float through the air. The sight surprised the man, I suppose he was not aware of who he was dealing with when he answered our summons. Gravedigger, quick as ever, got to work with the chains. The man tried to resist but few can escape once they have fallen into Gravedigger's hands. With the stranger subdued, I was able to capture a picture of him to verify my story. The Man from the Box "Greetings, I apologize for the lack of hospitality on our part. I take it that you are the being others refer to by the moniker 'Pinhead'. Is that right?" Calming his anger at his sudden imprisonment, the man let out a long sigh before answering my question. "I have heard mention of that crass name from lambs seeking my gifts. Do not address me with it again. I am Suffering bestowed flesh. Ecstasy made manifest. Chief amongst the Cenobites: Explorers of the further regions of experience. Demons to some, Angels to others." "So you're the guy. Not quite a demon, but certainly far removed from any angel I've encountered. I greet you, Cenobite." After bowing to the immobilized man, he appeared to be confused. "You are strange. As is your silent companion." "I get that a lot. Now then, I'd like your opinion on my techniques." Grabbing hold of one of my floating tools, I approach the restrained cenobite and engage in an exchange of knowledge (I'll omit the gory details here). ~several hours later~ "... And that's why I believe you should start with the toes." "Exhilerating. I do believe you've made a convert of me. Few have been able to change my mind on matters of the flesh; consider it a high honor. Seeing as how you have exhausted your collection, I dare say our exchange has reached a natural end." "I suppose you'e right, Hell Priest. I apologize if I appear lacking. Few in this realm strive to advance this field. They cling to magic and its trappings like the zealots they are. It has proven difficult to develop my skills further." "If you seek transcendence in the art of torment, might I suggest a brief stay with us? You have the makings of Cenobite, young Xerxes. Such talent should be nurtured in a suitable environment." "Oh, I'm not sure. I have responsibilities to attend to in this realm." "Time is of no consequence to us in my lord's realm. Leviathan will ensure you return at the desired moment." The chains that bound the Cenobite disintegrated and he stood upright. It appeared to me as though he could have used a similar trick immediately following his capture. Given his offer, I believe he willingly submitted himself to my devices in an effort to test me. He is truly unlike any other I have met. A devotee of extreme sensation through and through. The more I learn about him, the more I desire to be like him. Of course, I do not wish to senselessly cause harm. Rather, I wish to see the barrier between sensations collapse before my very own eyes. What could remain when all else vanishes? Gravedigger read my mind and assured me that he could look after the affairs of this realm on my behalf. And so it was that I took the Cenobite's hand and ventured into his heaven. To you all, I doubt even ten days have passed since my leave of absence. However, time can be a fickle thing on the periphery of sensation. I did not keep track of my time spent amongst them. The stories I could share of my findings... but I think I will refrain. Another time, perhaps. My training has offered me a most unusual enlightenment. The hope inherent to flesh transcends stimuli. What music to the soul! After my discovery, I stood on equal footing with the explorers. Having learnt all I could, I returned to our dear realm. And now, I pen this account for you all. I have taken the liberty of storing the Lament Configuration away to prevent its misuse. Too few can be trusted with the gifts it offers. Do not ask for it. I have been entrusted by them and their lord as its steward. With that out of the way, I look forward to returning to my duties in this realm. Such a long time spent away can make anyone wish for home. Be seeing you, Xerxes |
2024.05.19 03:38 TrueSteam16 Just a little something that helped me when I was at work
I had acute insomnia caused by anxiety that lasted around 4 months. Getting 1-3 hours sleep a night. I had such a a difficult time at work during this. I felt like everyone could see the bags under my eyes, or that I was being quieter, or that I was going to the bathroom more (anxiety giving me stomach issues). I read a book called The Sleep Solution by Chris Winter and there was a page in the book that stuck out to me. I wrote it down and must have read it everyday for months during my lunch and break at work. Just thought I'd share it in case anyone else can get a moments relief from it. It goes like this:
"I hope reading this book has helped you both understand your sleep more fully and figure out solutions to your problems. Well not traditionally so, this entire book was written with an eye towards CBT-I. Despite my careful planning unfortunately some people reading this book are not going to find quick solutions to their insomnia. That's simply a fact. Doctors are human. Medical resources are limited, and some people, no matter what happens, feel like they cannot sleep from time to time. One incredibly powerful tool in your fight against sleep disturbances is acceptance. Accept your sleep for what it is, optimize what you can, and move on with your life.
I have seen thousands of patients with sleep issues and insomnia. In my experience, the disturbance is as debilitating as an individual chooses to make it. Let me explain what I mean. Visit any University teaching hospital at night. In fact for a real thrill, go back 20 years, before work our restrictions were put into place. Talk to a doctor who took calls during that time. I remember my residency being one virtually of no sleep when we were on call. That was the norm. Residents were going limited or no sleep every other night or every third night for months if not years. Take a look at the level of functioning of these people. It was really high. These individuals were operating, doing spinal taps, sticking lines into patient's necks, that kind of thing. Highly functional? Absolutely. Sleepy? God yes. But the bottom line was this. DESPITE EXTEME LEVELS OF SLEEP DEPRIVATION AND SLEEPINESS, THESE INDIVIDUALS FUNCTIONED SURPRISINGLY WELL.
Why is it that patients with insomnia, who often demonstrate virtually no discernible sleepiness, are so burdened by the disability of their sleep disturbance? Perhaps because it is a choice. If this book helps you improve your sleep, then I have been successful.
If it doesn't, kind Reader, I sincerely hope you make the choice that while you are working on your sleep's improvement, the Sleep difficulties will not ruin your life. Make the choice that you are going to feel good tomorrow regardless of your sleep tonight. And if tonight's sleep is not amazing, resolve that tomorrow's will be.
Don't make your sleep disturbance a defining characteristic in your life. The hours it takes you to fall asleep is not that big of a deal. Believe this. Free yourself. You are in a comfortable bed away from the stresses of the day, stretch out and relaxed. Is this a situation to fear and get upset about? Don't let this issue lead you down the dark path to hard insomnia."
submitted by TrueSteam16 to insomnia [link] [comments]
"I hope reading this book has helped you both understand your sleep more fully and figure out solutions to your problems. Well not traditionally so, this entire book was written with an eye towards CBT-I. Despite my careful planning unfortunately some people reading this book are not going to find quick solutions to their insomnia. That's simply a fact. Doctors are human. Medical resources are limited, and some people, no matter what happens, feel like they cannot sleep from time to time. One incredibly powerful tool in your fight against sleep disturbances is acceptance. Accept your sleep for what it is, optimize what you can, and move on with your life.
I have seen thousands of patients with sleep issues and insomnia. In my experience, the disturbance is as debilitating as an individual chooses to make it. Let me explain what I mean. Visit any University teaching hospital at night. In fact for a real thrill, go back 20 years, before work our restrictions were put into place. Talk to a doctor who took calls during that time. I remember my residency being one virtually of no sleep when we were on call. That was the norm. Residents were going limited or no sleep every other night or every third night for months if not years. Take a look at the level of functioning of these people. It was really high. These individuals were operating, doing spinal taps, sticking lines into patient's necks, that kind of thing. Highly functional? Absolutely. Sleepy? God yes. But the bottom line was this. DESPITE EXTEME LEVELS OF SLEEP DEPRIVATION AND SLEEPINESS, THESE INDIVIDUALS FUNCTIONED SURPRISINGLY WELL.
Why is it that patients with insomnia, who often demonstrate virtually no discernible sleepiness, are so burdened by the disability of their sleep disturbance? Perhaps because it is a choice. If this book helps you improve your sleep, then I have been successful.
If it doesn't, kind Reader, I sincerely hope you make the choice that while you are working on your sleep's improvement, the Sleep difficulties will not ruin your life. Make the choice that you are going to feel good tomorrow regardless of your sleep tonight. And if tonight's sleep is not amazing, resolve that tomorrow's will be.
Don't make your sleep disturbance a defining characteristic in your life. The hours it takes you to fall asleep is not that big of a deal. Believe this. Free yourself. You are in a comfortable bed away from the stresses of the day, stretch out and relaxed. Is this a situation to fear and get upset about? Don't let this issue lead you down the dark path to hard insomnia."
2024.05.19 03:26 flyingdoctorED Qs re checkin/bag for separate tickets
Hello, I tried googling this but so far haven’t gotten a definitive answer.
I’m hoping to book from China to Sydney via Hong Kong.
China to HKG with Cathay + HKG to SYD with QF
Qantas is not allowing me to search for classic reward seats with the multi city tool for the departing Chinese city. (However I could search when I’m not using the multi city tool)
If I book separately e.g. economy from China to HKG and then business from HKG to Sydney. Will I be able to check in for both flights when I leave China? Will my bags to checked through to Sydney?
If I book everything under 1 ticket (I assume I may have to call Qantas) would I be eligible to checkin for both flights and check my bag through to Sydney?
Thanks in advance.
submitted by flyingdoctorED to QantasFrequentFlyer [link] [comments]
I’m hoping to book from China to Sydney via Hong Kong.
China to HKG with Cathay + HKG to SYD with QF
Qantas is not allowing me to search for classic reward seats with the multi city tool for the departing Chinese city. (However I could search when I’m not using the multi city tool)
If I book separately e.g. economy from China to HKG and then business from HKG to Sydney. Will I be able to check in for both flights when I leave China? Will my bags to checked through to Sydney?
If I book everything under 1 ticket (I assume I may have to call Qantas) would I be eligible to checkin for both flights and check my bag through to Sydney?
Thanks in advance.
2024.05.19 02:41 meatbunpie I did it. I read all 20 manhwa chapters then 123 + 5 LN chapters and side stories in 2 days since you guys started posting about it [My Beloved Oppressor]
TL;DR: PLEASE READ THE LN!!!
I've always had an obsession over manhwa and manga (especially OI), and I was especially intrigued because how polarizing people's opinions were on it. I love my fair share of angst and trauma porn and toxicity, and although I dig through all the webtoon and manga trash out there, even I have lines I don't cross/tolerate, and series I drop. Especially with abusive/toxic couples, shit story, lack of development, lack of realism, lack of respect, misogyny, repetitive tropes, etc. But I always give everything a try (even trashy sexist smuts or Chinese manhuas)
But please I IMPLORE you: give the light novel of [My Beloved Oppressor] a read. The manhwa is great and beautiful, but doesn't do the story as much justice with how many details and emotional nuances that are left out. It's so rushed too.
I just finished and I am clutching my pears, biting my fist, sobbing my eyes out, and screaming.
I came for toxic hot trash and irredeemable black haired MLs and timid FLs to rag on, but actually got pretty hooked and teary from these 20 manhwa chapters. I saw on this reddit a great free place to read quality translations at: https://www.patreon.com/collection/188783?view=expanded
I do not ever read LNs for even my top-tier SSS class manhwas, but I had an unusual pull into these characters' lives and story. And thus I began to spiral with these characters.
To avoid spoilers, I wasn't expecting the development of the story, and I truly felt like I was going through the same life-changing rollercoaster as the characters. Not just the FL and ML but the world, setting, side characters, etc. the story is well thought out, detailed, BEAUTIFULLY written and expressed, and I literally felt like I was being sucker punched at some parts I was almost nauseous and disoriented. I could clearly picture scenes with such an artistic vivid imagination and suffered to many emotions throughout the reading.
My tissues are soaked with hot tears, and yet at the end I feel so unbelievably hurt and yet whole from the entire LN. The side stories and ending seriously felt so complete, and I felt there weren't any loose ends besides maybe some parts of the MLs past and whatnot, but I never said this series was perfect. I am very satisfied after, although I feel so impacted.
But they felt like fleshed out characters that I can't bring myself to love or hate, and I just want them find peace and happiness. I love how the FLs draws her line and doesn't just come running back to the ML when he's all ghastly and begging forgiveness. And he honestly doesn't do too much annoying begging and obsessing. He does try his best to separate them and to just love her from the shadows and be respectful of her wishes, although he's horrified of the thought of her killing herself while out. Even if not perfectly or at first. He also doesn't just leave his duties to some poor assistant side character, or completely neglect his role as the commander. In fact, he drowns in it since he feels it's the best thing he can do for her (bring peace and end the war and make a better place for her to live). It's my pet peeve when MLs abandon their jobs/duties over their loss of the FL and the company/empire/whatever they're running suffers from his emotional outbursts and grief over her while he's got bags under his eyes and has sexy shot of him with alcohol and cigarettes lmao.
The MLs development is truly such a breath of fresh air. I can understand his fucked up mentality and obsession, his self-deprication, self-destructive nature, and inferiority, and so on. And the FL isn't some pushover smiley happy Mary Sue. She has her flaws and confronts them throughout the story, and she's not some completely innocent perfect victim either. She really grows so much and I love how she interacts with Heiner. She really recognizes how unhealthy his 'love' is until he fully recognizes his feelings and perspective.
They get dirty and scarred, fight and argue, have unbearably sweet moments that made me want to burst, and gut wrenching parts that made me have to set me phone down. The insight the LN gives to Annette and Heiner's thoughts and feelings is on a whole different level.
For the homies who already read all of the LN too: First of all, Catherine supremacy for life. They were a fleshed out family with feelings, and not some tool or stepping stone for Annette like other runaway FLs after escaping or divorce.
Can't stress enough how the story doesn't just tunnel vision on the main couple too. Side characters are part of the story and make big impacts. Even the sniper at the church who got his face mauled is who saved her life in the fire. And even Catherine (in the side stories) would give it to Heiner over the phone and he'd reflect on himself. Even the guy who ratted Annette out while she was staying with them post-divorce showed up again when he lost his legs in battle and they had a moment together.
Annette's descent into depression was depicted so realistically it hit too close to home. The memory loss, handwriting and dexterity degradation, and her reaction to the miscarriage felt too real. So often depictions can feel too cheap or shallow. I was horrified by her suicide attempts but could completely put myself in her shoes. But it just doesn't go away quickly either, she does struggle with it and taking care of herself, or having the motivation to recover or do therapy to improve her ruined left hand after the church collapse
>!But seriously, the war church fire incident and the piano was seriously immaculate. The references to the Saint mural and glimpses to the past that reminds me of how far we've come and how much of her life has changed, Joseph, and the piano-playing scene. The shaken feelings of the enemy troops and battle with morality, that moment of pure serenity, I was so absorbed. I mean the play that the piano and music had in her journey and the story too was so tasteful.
And oh my God the ending with the title meaning reveal- I seriously thought it was another shitty toxic title but it was actually the name of the song Heiner fell in love with before he met her... and the one she played that lured him in. And what a switch around because I always assumed the ML was the oppressor in question, but really it was the FL to him because how much she engulfed his life. They even address in the story how her love is spread between so many things (piano) and people, and Heiner has nothing but her.!<
It's really such a tragedy that his innocent youthful crush became such a a double edged serrated knife. So obsessive and convoluted, and he created a cult-like worship of a fictional version of her in his head >! through extreme torture... I mean that kind of disassociation was literally the only way he could survive. Plus how could someone raised the way he was understand love and how to give/receive it? !<
I'll stop rambling here for now but guys please comment or something, I have so many feelings after reading the LN I NEED to talk more about it with someone 😭
submitted by meatbunpie to OtomeIsekai [link] [comments]
I've always had an obsession over manhwa and manga (especially OI), and I was especially intrigued because how polarizing people's opinions were on it. I love my fair share of angst and trauma porn and toxicity, and although I dig through all the webtoon and manga trash out there, even I have lines I don't cross/tolerate, and series I drop. Especially with abusive/toxic couples, shit story, lack of development, lack of realism, lack of respect, misogyny, repetitive tropes, etc. But I always give everything a try (even trashy sexist smuts or Chinese manhuas)
But please I IMPLORE you: give the light novel of [My Beloved Oppressor] a read. The manhwa is great and beautiful, but doesn't do the story as much justice with how many details and emotional nuances that are left out. It's so rushed too.
I just finished and I am clutching my pears, biting my fist, sobbing my eyes out, and screaming.
I came for toxic hot trash and irredeemable black haired MLs and timid FLs to rag on, but actually got pretty hooked and teary from these 20 manhwa chapters. I saw on this reddit a great free place to read quality translations at: https://www.patreon.com/collection/188783?view=expanded
I do not ever read LNs for even my top-tier SSS class manhwas, but I had an unusual pull into these characters' lives and story. And thus I began to spiral with these characters.
To avoid spoilers, I wasn't expecting the development of the story, and I truly felt like I was going through the same life-changing rollercoaster as the characters. Not just the FL and ML but the world, setting, side characters, etc. the story is well thought out, detailed, BEAUTIFULLY written and expressed, and I literally felt like I was being sucker punched at some parts I was almost nauseous and disoriented. I could clearly picture scenes with such an artistic vivid imagination and suffered to many emotions throughout the reading.
My tissues are soaked with hot tears, and yet at the end I feel so unbelievably hurt and yet whole from the entire LN. The side stories and ending seriously felt so complete, and I felt there weren't any loose ends besides maybe some parts of the MLs past and whatnot, but I never said this series was perfect. I am very satisfied after, although I feel so impacted.
But they felt like fleshed out characters that I can't bring myself to love or hate, and I just want them find peace and happiness. I love how the FLs draws her line and doesn't just come running back to the ML when he's all ghastly and begging forgiveness. And he honestly doesn't do too much annoying begging and obsessing. He does try his best to separate them and to just love her from the shadows and be respectful of her wishes, although he's horrified of the thought of her killing herself while out. Even if not perfectly or at first. He also doesn't just leave his duties to some poor assistant side character, or completely neglect his role as the commander. In fact, he drowns in it since he feels it's the best thing he can do for her (bring peace and end the war and make a better place for her to live). It's my pet peeve when MLs abandon their jobs/duties over their loss of the FL and the company/empire/whatever they're running suffers from his emotional outbursts and grief over her while he's got bags under his eyes and has sexy shot of him with alcohol and cigarettes lmao.
The MLs development is truly such a breath of fresh air. I can understand his fucked up mentality and obsession, his self-deprication, self-destructive nature, and inferiority, and so on. And the FL isn't some pushover smiley happy Mary Sue. She has her flaws and confronts them throughout the story, and she's not some completely innocent perfect victim either. She really grows so much and I love how she interacts with Heiner. She really recognizes how unhealthy his 'love' is until he fully recognizes his feelings and perspective.
They get dirty and scarred, fight and argue, have unbearably sweet moments that made me want to burst, and gut wrenching parts that made me have to set me phone down. The insight the LN gives to Annette and Heiner's thoughts and feelings is on a whole different level.
For the homies who already read all of the LN too: First of all, Catherine supremacy for life. They were a fleshed out family with feelings, and not some tool or stepping stone for Annette like other runaway FLs after escaping or divorce.
Can't stress enough how the story doesn't just tunnel vision on the main couple too. Side characters are part of the story and make big impacts. Even the sniper at the church who got his face mauled is who saved her life in the fire. And even Catherine (in the side stories) would give it to Heiner over the phone and he'd reflect on himself. Even the guy who ratted Annette out while she was staying with them post-divorce showed up again when he lost his legs in battle and they had a moment together.
Annette's descent into depression was depicted so realistically it hit too close to home. The memory loss, handwriting and dexterity degradation, and her reaction to the miscarriage felt too real. So often depictions can feel too cheap or shallow. I was horrified by her suicide attempts but could completely put myself in her shoes. But it just doesn't go away quickly either, she does struggle with it and taking care of herself, or having the motivation to recover or do therapy to improve her ruined left hand after the church collapse
>!But seriously, the war church fire incident and the piano was seriously immaculate. The references to the Saint mural and glimpses to the past that reminds me of how far we've come and how much of her life has changed, Joseph, and the piano-playing scene. The shaken feelings of the enemy troops and battle with morality, that moment of pure serenity, I was so absorbed. I mean the play that the piano and music had in her journey and the story too was so tasteful.
And oh my God the ending with the title meaning reveal- I seriously thought it was another shitty toxic title but it was actually the name of the song Heiner fell in love with before he met her... and the one she played that lured him in. And what a switch around because I always assumed the ML was the oppressor in question, but really it was the FL to him because how much she engulfed his life. They even address in the story how her love is spread between so many things (piano) and people, and Heiner has nothing but her.!<
It's really such a tragedy that his innocent youthful crush became such a a double edged serrated knife. So obsessive and convoluted, and he created a cult-like worship of a fictional version of her in his head >! through extreme torture... I mean that kind of disassociation was literally the only way he could survive. Plus how could someone raised the way he was understand love and how to give/receive it? !<
I'll stop rambling here for now but guys please comment or something, I have so many feelings after reading the LN I NEED to talk more about it with someone 😭
2024.05.19 02:05 amiller0185 First Project(ish)
 | My first project REALLY was the tomato, because I needed one and didn't want to buy one. submitted by amiller0185 to myog [link] [comments] This is the LearnMYOG bike stem bag and I want to thank him for making this a free learning tool! The whole thing is made from materials that I picked up for free that would have gone to landfill so that makes it feel sooo much better. Plus, I got to work with a variety of materials and learn a whole lot. The stretch pocket is cut from leggings, the bag from hemp pants, the drawcord run from denim, and the liner from an old Hawaiian shirt. It isn't perfect but I'm really proud with how it came out and I learned a lot. Particularly how different fabrics work with my machine. I ran into some troubles and developed some solutions that I think will help in the future working with stretchy fabrics. I also got stalled for an hour troubleshooting because the thread got pulled through the lifter arm (idiot) and I didn't notice when I rethreaded the needle. Gotta look for that N! Can't wait to put it to use! |
2024.05.19 01:10 CoupleLoud4296 WTS - Supreme Accessories & Clothes MUST GO! 🙌🏼 Price Cuts
 | PayPal Only - BUNDLES ENCOURAGED & DEALS GIVEN! Comment here first - then message! submitted by CoupleLoud4296 to supremeclothing [link] [comments] https://imgur.com/a/DPJPsRQ (For more photos) ACCESSORIES•Dulton Clips 3 pack Multicolor 1 red/1 yellow/1 blue - 3x in stock - $33 each or 3 for $85•North Face RTG Vest Black ADJUSTABLE SIZE Medium - •FW23 Small Cinch Pouch Bag - White - $65 •FW24 Mini Duffle Bag - Orange $170 •SS23 Strawberries skateboard $100 •Nike Crew Socks Black - $45 each (2 avail) •Dulton Tray Powder Coated Red $40 •SS23 Gradient Box Logo Fitted New Era Orange) 7&3/4 & Black/Grey 7&1/4 - $69ea - 2 for $110 •FW23 Championships Box Logo New Era Stone/Purple/Light Grey - 7&1/2 - $80 •SS23 Thermal Pant White - L - $45 •SS24 Maison Margiela MM6 Painted Camp Hat Black - $130 •SS24 Maison Margiela MM6 Bike Lock - White - $240 •SS21 Monogram Twill Crusher & Vans Size 6.5 Men’s (MATCHING SET) $105 for both - or $55 each •SS22 Gradient Jacquard Denim Mesh Back 5-Panel Hat - $30 •Comme Des Garçons Pants - Multicolor - Large - $215 SHIRTS•SS18 Corduroy Baseball Jersey Black - M (fits big like large) - $175•Pocket tee short sleeve Red/White/Blue camo - L - •FW19 Bite Me tee Navy - M - $25 •FW15 Cut & Sew Black (Thread Lined) Mini Chest Logo Tee Black - XL - •FW20 Balloons tee Black - M - $24 •FW14 Ballerina Cut & Sew tee Burgundy - L - •FW15 Splat Tee Grey/Purple - L - $35 •FW18 18 & Stormy tee (Donald Trump’s Affair) White - L - •SS15 Gold Tooth Tee Black - L - •SS19 Barbed Wire Moto L/S Jersey - XL - •SS19 Clayton Patterson Long Sleeve Black (spooky cat) L/S - XL - $35 •FW17 Kiss Tee Blue - M - $25 •SS15 Cotton Twill Baseball Tee (triangle patch logo on back) Black - SWEATSHIRTS•FW20 Futura Logo Crewneck Blue - M -•FW20 Globe Hooded Zip Up Sweatshirt - M - •SS23 Heather Grey Knit Big Box Logo Jacquard Knit Hooded Sweatshirt - XL - •FW16 Hooded 2 Tone Top Magenta/Green - L - •FW19 Mirrored Logo Hooded Sweatshirt Royal Blue - L - •SS12 Pinstripe Text Logo Hooded L/S Red - XL - •SS14 United Half Zip Racer Pullover - Red - Medium - $90 •FW18 Speedway Half Zip Pullover - Red - Large - $95 COAT/FLEECE•Skittles Polartec Fleece Jacket Red - XL -•FW22 Nylon Filled Puffy Collared Shirt Yellow - M (fits L) - •FW20 Polartec Box Logo Fleece Sweatshirt (draw cord closure) - M - (small burn hole can be tweezed back to normal) •FW17 Hysteric Glamour N-3B Parka Fur Lined Coat - M (BIG) - •SS18 Court Half Zip Pullover / Windbreaker with hood - Pink - Large - $185 Ask questions & negotiate! More pictures: |
2024.05.19 00:48 kissmenowstupid The OP step GDT can make or break your product. Which do you prefer?
Most CAD model design includes GDT (GD&T) in full consideration (design intent) of fit, function, and form. But typically in manufacturing, every product goes through several process ‘OP steps’.
The designers working with 3d digital models, (usually) do not have 25-30 years of CNC, casting/molding, stock milling, or AM/3d-printing experience, in terms of cradle to operational product.
This Forum is to share ideas and methods, to ‘rescue new products’ which may be headed for a multi-car pile-up, in the dimensional world.
If you’ve been in MFG for a while, you know this. If you have Green or Black Belt in Lean/LSS, you understand:
With precision machining/fabrication, it appears the Gaps between OPs (operation steps on your shop floor), where engineering, tool design, and quality-metrology spend days, weeks, or even more … trouble-shooting the NET RESULT of weak communication between operation steps.
Admitting we own this problem (of delays we can count on) is truly an ‘escape’ of the human variety.
I can’t hand the ‘solution’ to this, but with a team effort, we can certainly improve from where we are today. What I CAN DO, is present the factors we know exist every day of our manufacturing/fabrication lives on the job.
Can we use FMEA’s on the NPD cycle? Yes. Can we use value stream for recent NPD’s? Yes Can we use Pareto’s to help identify gaps? Probably.
The intent of the messages here is: As Quality and Manufacturing engineers, most of us have these huge “tool-bags” containing known methods, tried and proven, to use mathematics and critical thinking, to guide us towards true understanding of the gaps in our NPD life cycles.
Because GD&T is such a vital tool to define product surfaces, etc. and is becoming integral as a COMMUNICATION TOOL with Model Based Definitions, it seems appropriate that it is included in the title of this Forum.
So Welcome to “OP-step GDT”! Your ideas and current challenges are most welcome. Please refrain from specific names of people and companies.
submitted by kissmenowstupid to OP_step_GDT [link] [comments]
The designers working with 3d digital models, (usually) do not have 25-30 years of CNC, casting/molding, stock milling, or AM/3d-printing experience, in terms of cradle to operational product.
This Forum is to share ideas and methods, to ‘rescue new products’ which may be headed for a multi-car pile-up, in the dimensional world.
If you’ve been in MFG for a while, you know this. If you have Green or Black Belt in Lean/LSS, you understand:
1. Time is the most valuable factor, in terms of cost. (Albeit new metals/process innovations)
2. 80% of time is lost in ‘the Gaps’, and 20% or less, is value added ‘in-process’.
Think most will agree, the Primary focus of lean practitioners is to “Mind your Gaps”.With precision machining/fabrication, it appears the Gaps between OPs (operation steps on your shop floor), where engineering, tool design, and quality-metrology spend days, weeks, or even more … trouble-shooting the NET RESULT of weak communication between operation steps.
Admitting we own this problem (of delays we can count on) is truly an ‘escape’ of the human variety.
I can’t hand the ‘solution’ to this, but with a team effort, we can certainly improve from where we are today. What I CAN DO, is present the factors we know exist every day of our manufacturing/fabrication lives on the job.
Can we use FMEA’s on the NPD cycle? Yes. Can we use value stream for recent NPD’s? Yes Can we use Pareto’s to help identify gaps? Probably.
The intent of the messages here is: As Quality and Manufacturing engineers, most of us have these huge “tool-bags” containing known methods, tried and proven, to use mathematics and critical thinking, to guide us towards true understanding of the gaps in our NPD life cycles.
Because GD&T is such a vital tool to define product surfaces, etc. and is becoming integral as a COMMUNICATION TOOL with Model Based Definitions, it seems appropriate that it is included in the title of this Forum.
So Welcome to “OP-step GDT”! Your ideas and current challenges are most welcome. Please refrain from specific names of people and companies.
2024.05.19 00:24 Open-that-door [WTS][USA-CA] Entire Spartan Plate Carrier Setup & AXL, Blackhawk BULK accessories for Crye Precision Bundle
Image: https://imgur.com/a/Trq1lax
$240 shipped Everything You See here to your door.
Bundle 1: *Quit Airsoft* - Entire Plate Carrier Setup, for $150 shipped Take Out Everything.
Spartan Armor Systems "Spartan" Shooters Cut Plate Carrier(Black) asked for $60 shipped.
Emerson Gear Tactical Dump Drop Pouch Bag Multicamo Tool Pouch (Black) asked for $20 shipped.
Elite Spanker Tactical MOLLE Hydration Pack for 3L Hydration Water Bladder asked for $30 shipped.
Thyrm DarkVault Comms Critical Gear Case, Waterproof, Attachable to MOLLE Rugged Storage for Cell Phone, GPS, Tools asked for $30 shipped.
Condor Elite MA44-002 Triple Stacker M4 Mag Pouch Black asked for $20 shipped.
M-Series 300 Round Hi-Cap AEG Airsoft Magazines x3 asked for $28 shipped.
Acetech Tracer BBs (Approx 2700 Count) 0.25g asked for $19 shipped, it has been stored in a dark environment.
***********************************************
Bundle 2: $100 to take out everything shipped for items in All AXL, MOS & Blackhawk items.
AXL Admin Zipper for the Crye Precision® JPC™ Medium / Multicam x1 asked for $27
AXL Placard Conversion for Crye Front Flaps x1 asked for $30
MOS Tactical Winglets™ Radio/Utility Pouch x2/1 pair Color: Multicam asked for $45
Blackhawk S.T.R.I.K.E.® Gen.4 Flashbang Pouch - MOLLE Color: Multicam: $22 shipped.
Sale only in CONUS, Paypal G&S only.
submitted by Open-that-door to airsoftmarket [link] [comments]
$240 shipped Everything You See here to your door.
You can choose item combinations between bundles 1 & 2 if that is worth >$100 or close to that, please contact me. Items availability will be updated accordingly, btw I have also put it all over the net.
Spartan Armor Systems "Spartan" Shooters Cut Plate Carrier(Black) asked for $60 shipped.
Emerson Gear Tactical Dump Drop Pouch Bag Multicamo Tool Pouch (Black) asked for $20 shipped.
Elite Spanker Tactical MOLLE Hydration Pack for 3L Hydration Water Bladder asked for $30 shipped.
Thyrm DarkVault Comms Critical Gear Case, Waterproof, Attachable to MOLLE Rugged Storage for Cell Phone, GPS, Tools asked for $30 shipped.
Condor Elite MA44-002 Triple Stacker M4 Mag Pouch Black asked for $20 shipped.
M-Series 300 Round Hi-Cap AEG Airsoft Magazines x3 asked for $28 shipped.
Acetech Tracer BBs (Approx 2700 Count) 0.25g asked for $19 shipped, it has been stored in a dark environment.
***********************************************
Bundle 2: $100 to take out everything shipped for items in All AXL, MOS & Blackhawk items.
AXL Admin Zipper for the Crye Precision® JPC™ Medium / Multicam x1 asked for $27
AXL Placard Conversion for Crye Front Flaps x1 asked for $30
MOS Tactical Winglets™ Radio/Utility Pouch x2/1 pair Color: Multicam asked for $45
Blackhawk S.T.R.I.K.E.® Gen.4 Flashbang Pouch - MOLLE Color: Multicam: $22 shipped.
Sale only in CONUS, Paypal G&S only.
2024.05.18 23:50 CDown01 Eagles Peak Pt.3
Previous Part
I woke up to the smell of sausage and eggs. Over by the side of my bed was a tray with a masterfully prepared omelet and sausage to match. That’s not what caught my eye though. What did that was the little note stuck to the side of they tray.
“Sorry for terrorizing you- R”
Was scrawled in barley legible hand writing, Rocco’s I imagined.
“So it can cook but not write?”
I muttered to myself as I got out of bed.
A fresh change of clothes was laid out for me and I decided just not to question it. The clothes fit perfectly and I tried not to let my mind wander as to why that was while I ate breakfast. Rocco’s omelet was outstanding, for a trash panda he made a great cook but I have no idea where he would’ve picked that up. After I finished I brought my dishes downstairs and ran into Stein in the kitchen.
“The clothes fit don’t they? My eyes aren’t what they used to be, I should’ve just sent Rocco up to ask your size.”
“No no, they fit fine, and please don’t send Rocco to do anything without telling me. I think that might just give me a heart attack on the spot. I’m still really not used to all… this going on”
I said gesturing to the raccoon who had wandered into the kitchen and was now flipping me the bird with both his paws.
Stein nodded to me with what I hoped was understanding. As much as Rocco seemed harmless (Maybe… hopefully?) I really didn’t want the furry little demon arriving anywhere near me unexpectedly. We already saw how that went in the basement yesterday. I finished washing my dishes in the sink as Stein ate his breakfast. He seemed so calm and normal, compared to the things I’d seen in this house so far. If you took one look at Bianca you say she looked too good to be true. Rocco is… well, he’s a talking raccoon, that’s immediately strange. But when it came to Frank and Stein you couldn’t tell there was anything off about them. Honestly I still had trouble seeing where they fit into this whole thing.
I was lost in this train of thought as I went through the motions of taking my groceries out of the refrigerator where someone had put them. I didn’t even realize Bianca was standing behind me till she tapped my shoulder. Jumping out of my skin I screeched out,
“Jesus Rocco what the hell!”
Bianca went from serious to laughing hysterically in no time flat.
“He really has you spooked after last night doesn’t he?”
She barely got out between bouts of laughter.
“I’m sorry really, oh and I’ve got this for you.”
Chuckled Bianca, handing me a wad of cash with a face that didn’t look remotely sorry for laughing at me.
“Just for that I’ll take it! But I’ve got to ask, how do you have this much cash just lying around, isn’t that a little risky?”
“You’d have to ask my unc… Frank or Stein.”
Bianca answered, stumbling on the apparently familiar lie. As she said this Stein stood up from the table and answered my question.
“Researching the supernatural isn’t always safe but Germany pays its scientists well, even if we don’t work for them anymore.”
“Germany? When did you work with the German government?”
I asked, a sinking suspicion settling into the pit of my stomach.
“1941, The Führer requested me specifically and I met Frank there. Oh don’t look at me like that! I didn’t support his cause, he simply wanted to look into forces outside his control and that was my specialty. It was business nothing more.”
Stein responded, pointing his finger at me and sounding a little annoyed.
“But that would make you… there’s no way you’re that old. Uh I don’t mean!”
“Think nothing of it, if anything, it means our serum worked. Distilled it from the DNA of a few pureblooded vampires and designed it to slow human aging to a crawl.”
Bianca cut him off,
“Stein, I think I can see steam coming out his ears. Can we maybe give the supernatural stuff a rest? I know you’ve been around it all your life but I think its a bit much for him.”
“Yes, I suppose your right Bianca. I’ll leave you two be then.”
Stein surrendered, as he turned and walked out of the room. Like he hadn’t just dropped yet another bomb on me.
I held myself together much better this time. After talking raccoons and succubi, learning vampires apparently existed in such an offhanded manner just didn’t surprise me as much. At this point I was just about ready to accept any supernatural entity I’d ever heard of existed in some capacity. In fact that might be the best policy moving forward.
“Hey you’re not going to pass out on us again right?”
Bianca asked turning back to me, genuine concern in her voice.
“No, I’ll be fine. The more I hear about this kind of thing the better I am at just accepting it. It’s a lot easier hearing it from one of you guys than having it drop out of the sky at me.”
I joked, walking with Bianca to the door. I noticed my poor attempt at a joke was the first time I said anything about Imalone without feeling like someone would call me crazy. I couldn’t dwell on that for too long right now though, I had to drop off the groceries that had taken me a full day to get. In hindsight though, I’ve had worst trips to the grocery store.
The next few days passed without any real issues, I got things set up in the house and ordered some furniture with the money I got from Bianca. On the second day I figured I should go out and explore the town a bit. I was getting bored being cooped up doing normal things and apparently I wanted to throw a wrench in all that.
“Maybe a bar” I thought to myself as I walked out the door just as the sun had started to think about setting, “Those are always a good place to meet people”.
This is where I tell you I may be just a little awkward. Even back home I didn’t really get out and meet new people much but I figured now is as good a time as any to start. I threw together a quick outfit with the clothes I brought with me from home. Hopefully I looked at least a little bit presentable in khakis and a red dress shirt. I walked out my door and immediately saw Bianca’s house peering out over the town. I considered dropping by to see if Bianca wanted to join me. I had told her about the reasons I ended up in Eagles Peak but I still knew precious little about her. I assumed her past wasn’t all sunshine and rainbows. I wanted to know what exactly drew someone like her to a sleepy little town like this. Maybe seeing if she wanted to join me would be a good opportunity to learn something about her? It’s entirely possible I just wanted to spend more time around her because she was drop dead gorgeous. Maybe it was because she was the first person I bumped into in town? I couldn’t put my finger on it and if we’re being honest I didn’t want to admit the real reason to myself.
That would have to wait for another day though. I had spent so much time thinking about it that by the time I snapped back to reality I was by the greyhound bus stop, well past her house. There was another bus stopped there and people were getting off of it. None of them looked like what I would call a local but its not like I’d really know what a “local” looked like here anyways. Still, this town couldn’t get this many visitors right? It was weird but probably had a completely reasonable explanation.
“The Eagle’s Roost” read the sign above the bar’s entrance, it was actually a pretty high class looking establishment. The fresh red paint gleamed against the faded whites and grays of the other buildings on the street. Inside, a well polished dark wood floor greeted me. The room was completed by a roaring stone fireplace and a well used set of stools by the counter.
“Hey there! Anyone home?!”
I called out into the empty bar.
“Give me a minute!”
Replied a deep gruff voice form the back room. Eventually a man emerged from the room, well I say man but what I mean was a mountain in human form. This guy had to be about 7 feet tall and built from solid granite. Seriously, the muscles on this guy would’ve put The Rock to shame.
“Little early to start drinkin’ isn’t it?”
The mountain grunted judgmentally.
“Well I’m new here I just wanted to see the town. I could come back later if you want.”
“New, why didn’t you say so! New here, I haven’t seen anyone new here in years! come sit down if you’ve got questions about this place I can probably answer them!”
The now elated giant boomed at me. He turned hospitable in an instant, offering me a drink on the house for his poor manners before. His name was Tucker and he’d come to the town years ago as a foreman for it’s mine. The mine dried up and the workers moved on but something about this town spoke to him and he decided to stay. He opened up this bar and the rest is history. Something about the way he talked about the mine did’t sit right with me though. He kept mentioning how it dried up like he was trying to convince me that was what happened. Plus a mine out here didn’t exactly make much sense to me.
“So you run this place alone then?”
I asked, more to be polite than out of genuine curiosity. We had started to run out of things to talk about after conversation about the mine dried up much like it apparently had.
“Never needed any help besides my wife’s, but most days I just run the place alone, yes. No sense in hiring help here, not many people looking for work outside of the ones working at that grocery store down the street. Anyways I should get back to work, its getting to be about time we actually open to the public.”
I turned my head to look at the sign I now realized was stuck to the door. “Eagle’s Roost Hours: 6PM-1AM every night”. I realized with embarrassment I had walked through the door an hour before opening. Tuck had been nothing but friendly though, and I almost felt bad for assuming the locals like him would want to shoo me away. After all, everyone I’d met so far had been nothing but nice, not including Rocco that is.
As I turned my attention back to my drink I thought about the mine again. I hadn’t seen any records of the mine Tuck mentioned in my internet searches of the town before I came here. Honestly it had been incredibly difficult to dig up anything on the town. I wasn’t necessarily the most thorough in my search, but mines tend to be a staple of the towns they’re located in. This mine in particular seems to be what the town was built on. I’m not sure what had me so worked up on this mine issue but I was sure it was important. I sat there at the bar, mulling it over and sipping on my drink when a hand slapped down on my shoulder.
The man it was attached to said something but I couldn’t catch it even if I wanted to. I was far to laser focused on the mark seared black into the mans hand, the exact same eagle that was burned into my back. I pushed him off and bolted for the door, all I heard behind me was the mans confused “What?” And Tuck shouting at him.
“Now what in the Blazes did you do to the poor kid Robert!”
I shot off into the street from the bar, no one was chasing me but the fact that the symbol was here had set me off like a deer running from a gunshot.
“What the hell happened to you?”
Called a now familiar, heavily accented voice from the alleyway.
“Rocco, what are you doing out here?”
I questioned, bewildered at finding him out in the open. I’d never admit it but seeing a familiar face, even Rocco’s, calmed me down a little
“I’m a raccoon in an alleyway, what do you think I’m doing, fishing? No, I’m rootin' around in the trash, Frank needs some lithium foil and he can’t be bothered to run out and buy some batteries himself, stingy bastard.”
He retorted, looking for all intents and purposes like a normal raccoon at the moment.
“Even if I were to guess I wouldn’t have even come close to that.”
“I live to surprise”
Rocco sneered, taking a bow dripping with sarcasm.
“Anyways Frank is back at the house right? There’s something I’ve got to tell him.”
I asked, turning and running as soon as I got a response in the affirmative.
“Yeah he is, what exactly is so importa…. And he’s gone”
I made it to their strange high house in record time and burst through the door like I owned the place. For some reason Bianca seemed completely unfazed as I crashed into the entryway without so much as a knock.
“You know, you don’t live here right?”
“Oh yeah, good to see you too Bianca. Anyways, were is Frank, or Stein for that matter I’ve got something to ask.”
“They’re in the basement.”
Bianca said pointing to the door without looking up from the book she was reading.
Her dismissive attitude didn’t even register to me as I made my way down the basement steps. I got to the bottom and an acrid scent assaulted my nostrils.
“Do I even want to know what that is?”
I called into the basement, announcing my presence. Frank emerged from a room to my side decked out in a full lab coat and goggles along with a hairnet to protect what little of his still remained.
“What do you need?”
“You guys seem to know a lot about the supernatural right? Well, does this symbol mean anything to you?”
I said pulling off my shirt and turning my back to show him the mark that woman had left me with. His reaction could best be described by the sound of shattering glass as he dropped the beaker he was holding as he saw the symbol.
“Where did you get that?!”
He yelled more than asked.
“Back in Imalone.”
“Imalone? What’s that supposed to mean?”
It dawned on me that I hadn’t explained it to him like I had Bianca, so I filled him in. I told him the whole truth this time, where the mark came from, what really drove me to Eagles Peak, all of it. Frank listened diligently looking more concerned by the minute, at some point Stein joined him. A similarly shocked look was plastered across his face. I swear he was turning white when he answered my question.
“It’s the mark of the Thunderbird, and from what you told us, you met… her in person.”
“So why do you look so worried about it?”
I asked, feeling a little worried.
“Well she’s marked you personally, most people that have that mark would’ve gotten it to show devotion or allegiance and it certainly wouldn’t have come directly from the Thunderbird.”
The way Stein talked about this “Thunderbird” made me think I may be in even deeper shit than I realized.
“So do you two actually know anything about the Thunderbird?”
I asked, hoping these two would know something considering their long study of the supernatural.
“Until recently I only knew of the native legends surrounding the creature. I heard of people marking themselves with that symbol so I assumed there must be some truth to the legends. But neither me nor Frank has ever seen the Thunderbird, much less seen it..er, her take a human form.”
Stein answered, sounding almost disappointed in himself. I got the sense that not knowing something like this really ate at him. Which was just further proven by what he said next, a grin suddenly appearing on his face.
“Frank, I think we have our next big research project on our hands then.”
“I’ll start pulling any records I can find of accounts like Keith’s here.”
Frank said, hurrying over to a computer in the basement corner that looked ancient.
“Yes and compare those to the various legends surrounding the Thunderbird.”
Stein responded, rifling through a row of cabinets against the far wall.
Those two seemed to be whipped into a frenzy by something they knew next to nothing about being dropped in their laps.
“Guys… Guys! Can we hold off on going full mad scientist mode for just a second I’ve got one more thing to ask!”
I yelled trying to get their attention. when they turned to me I could see the spark in both their eyes as they hastily responded in unison.
“Yes, what!”
“Have either of you heard about a mine in this town? Tuck at “Eagle’s Roost” mentioned it but I don’t remember seeing anything about it when I looked into this town.”
“Ah the mine, it’s out in the forest north of town somewhere. There was a collapse or something a few years after it opened and the town covered it up. It would’ve been very embarrassing for them to admit the screw up so they just… didn’t, that’s all there is too it.”
Frank answered, seemingly bothered by the mundaneness of that question.
“So the mine is still out there then?”
“Of course! What did you think it just walked away? No, leave us be we’ve got work to do.”
Stein snapped.
As I left the two to their business and made my way out of the house I ran into Rocco, several grimy batteries grasped in his paws.
“They uh… I don’t think they’ll need those batteries anymore bud.”
“God damnit! That’s what I get for trying to be helpful.”
Rocco yelled, as he threw the batteries against the wall. I had to chuckle at the absurdity of it all. Here I was walking past a talking raccoon on his way down to two scientists looking into a Thunderbird. That’s a real thing that’s currently happening to me. Just a few days ago simply seeing Rocco knocked me out almost immediately and now he was just a minor inconvenience. Could it be that I was actually adjusting to all the crazy things that had been happening around me? I sure thought so.
Upstairs, Bianca was still nose deep in her book at the kitchen table.
“Hey can I ask you something?”
“Yeah sure, what is it?”
“Ever been into the woods around town? There’s something I want to check out there.”
“I don’t usually leave the house all that much if I’m honest.”
Bianca answered, a touch of sadness in her voice.
“Do you want too? Leave the house I mean.”
“What are you getting at?”
“Well, I’m going to be headed out there tomorrow looking for the old mine.”
“And why are you looking for that?”
She questioned suspiciously.
“I have a feeling it has something to do with the mark that woman… and I forgot I didn’t tell you about that.”
Bianca looked up at me as she said with a smirk.
“I knew there was more to that story from the other night. Why didn’t you tell me?”
I’ll spare you the details but needless to say I told the story again. I really need to start bringing everyone together when I do these things, it would save me time.
“So that’s why you came here, and you think this mine has something to do with it?”
Bianca exclaimed excitedly. I could almost see the lightbulb going off over her head.
“Yeah that’s pretty much it, do you want to come with? I mean you don’t have to go but I”
She cut me off,
“You know what maybe I should go. Two sets of eyes gives us better odds right? And you have a bad history with forgotten places I seem to recall.”
Bianca said with a coy smile.
“That’s what we’ll do then, I’ll get some things ready and stop by tomorrow, we’ll leave from there.”
And before she had a chance to rethink her answer I left feeling pleased with myself.
My next stop was the hardware store on the other side of town. Of course I still had my travel bag from the good old Imalone trip but I figured I’d pick up some more tools that could come in handy.. I ended up with two heavy duty flashlights, some work gloves of various sizes cause I had no idea what size would fit Bianca, and a set of bolt cutters. It was only when I got up to the counter and the clerk gave me the stink eye that I noticed my mistake.
“You planning to break into something kid?”
Questioned the older guy cashing me out. I responded before my brain caught up with my mouth.
“I was planning on it but you guys didn’t sell balaclavas. So I guess I’ll have to wait.”
The man eyed me for a second then burst out laughing as he handed me my things. Which was good because I knew a few places back in Wisconsin where pulling that would’ve got me pulled into a backroom for questioning. Not a lot of people knew how to take a joke back home. Weirdly enough it was the first time I thought of home since coming here. Obviously I had family back there but we weren’t exactly close like I said before. I just found myself missing the familiarity of the area I had lived in for the past 24 years of my life. I think that’s why I came to the decision to call my mother when I got home later that night.
The whole walk home I had this strange feeling of being watched. No-one was there, I’m sure because I checked… several times. But even as I locked the door to my house and starting sorting out a bag of supplies for Bianca, the feeling didn’t go away. As I pulled out my phone to call my mother the feeling finally faded into the background as I got her familiar answering machine.
“Hi, you’ve reached Carla, leave your name and number after the tone.”
Straight and to the point as quickly as possible, that was the best way to describe mom and it showed even in her answering machine.
“Hi mom I bet you’re wondering where I ended up. Well I’m in New York now, in a sleepy little town. Its nice really, I already met some new people they’re… well they’re a bit strange but I think I might fit in with them. I’m still looking for a job but I had a really well paying temp thing the other day so I’ll be fine for a little while. Anyways, hope you’re doing well, love you.”
I teared up a bit as I ended the call, I hadn’t called my mother in at least a year. She never checked up on me and I never checked in with her. We’d see each other at family gatherings and talk but outside of that I didn’t really contact her much anymore. It was sort of a mutual agreement that we both had, we assumed the other was alright. But being this far from Wisconsin, this far from home, had finally caught up with me. I wanted to at least hear her voice, even if it was just a recording.
As I finished up packing for tomorrow I was quite proud of myself. I’d thought of just about everything, I dug some old hiking boots out for myself and some rope from my old travel bag. Several different sets of flint and steel and about three days worth of dehydrated food adorned the top pocket of both bags. I’d even found an old water purification kit that ended up in one of the duffle bags I brought from my apartment. In short, I was the most over prepared for an excursion like this I’d ever been. It did help push back the eyes I felt peering at me from somewhere over my shoulder, the feeling of being watched still not leaving me. Once I laid down and tried to fall asleep the feeling only intensified. Sounds of rolling thunder in the distance reminding me of my time in Imalone and the fury of the storm the Thunderbird brought. I felt strangely confident as well though, tomorrow Bianca and I may finally start to uncover some answers as to why I felt called to this town, and maybe even what this mark could mean for me.
submitted by CDown01 to AllureStories [link] [comments]
I woke up to the smell of sausage and eggs. Over by the side of my bed was a tray with a masterfully prepared omelet and sausage to match. That’s not what caught my eye though. What did that was the little note stuck to the side of they tray.
“Sorry for terrorizing you- R”
Was scrawled in barley legible hand writing, Rocco’s I imagined.
“So it can cook but not write?”
I muttered to myself as I got out of bed.
A fresh change of clothes was laid out for me and I decided just not to question it. The clothes fit perfectly and I tried not to let my mind wander as to why that was while I ate breakfast. Rocco’s omelet was outstanding, for a trash panda he made a great cook but I have no idea where he would’ve picked that up. After I finished I brought my dishes downstairs and ran into Stein in the kitchen.
“The clothes fit don’t they? My eyes aren’t what they used to be, I should’ve just sent Rocco up to ask your size.”
“No no, they fit fine, and please don’t send Rocco to do anything without telling me. I think that might just give me a heart attack on the spot. I’m still really not used to all… this going on”
I said gesturing to the raccoon who had wandered into the kitchen and was now flipping me the bird with both his paws.
Stein nodded to me with what I hoped was understanding. As much as Rocco seemed harmless (Maybe… hopefully?) I really didn’t want the furry little demon arriving anywhere near me unexpectedly. We already saw how that went in the basement yesterday. I finished washing my dishes in the sink as Stein ate his breakfast. He seemed so calm and normal, compared to the things I’d seen in this house so far. If you took one look at Bianca you say she looked too good to be true. Rocco is… well, he’s a talking raccoon, that’s immediately strange. But when it came to Frank and Stein you couldn’t tell there was anything off about them. Honestly I still had trouble seeing where they fit into this whole thing.
I was lost in this train of thought as I went through the motions of taking my groceries out of the refrigerator where someone had put them. I didn’t even realize Bianca was standing behind me till she tapped my shoulder. Jumping out of my skin I screeched out,
“Jesus Rocco what the hell!”
Bianca went from serious to laughing hysterically in no time flat.
“He really has you spooked after last night doesn’t he?”
She barely got out between bouts of laughter.
“I’m sorry really, oh and I’ve got this for you.”
Chuckled Bianca, handing me a wad of cash with a face that didn’t look remotely sorry for laughing at me.
“Just for that I’ll take it! But I’ve got to ask, how do you have this much cash just lying around, isn’t that a little risky?”
“You’d have to ask my unc… Frank or Stein.”
Bianca answered, stumbling on the apparently familiar lie. As she said this Stein stood up from the table and answered my question.
“Researching the supernatural isn’t always safe but Germany pays its scientists well, even if we don’t work for them anymore.”
“Germany? When did you work with the German government?”
I asked, a sinking suspicion settling into the pit of my stomach.
“1941, The Führer requested me specifically and I met Frank there. Oh don’t look at me like that! I didn’t support his cause, he simply wanted to look into forces outside his control and that was my specialty. It was business nothing more.”
Stein responded, pointing his finger at me and sounding a little annoyed.
“But that would make you… there’s no way you’re that old. Uh I don’t mean!”
“Think nothing of it, if anything, it means our serum worked. Distilled it from the DNA of a few pureblooded vampires and designed it to slow human aging to a crawl.”
Bianca cut him off,
“Stein, I think I can see steam coming out his ears. Can we maybe give the supernatural stuff a rest? I know you’ve been around it all your life but I think its a bit much for him.”
“Yes, I suppose your right Bianca. I’ll leave you two be then.”
Stein surrendered, as he turned and walked out of the room. Like he hadn’t just dropped yet another bomb on me.
I held myself together much better this time. After talking raccoons and succubi, learning vampires apparently existed in such an offhanded manner just didn’t surprise me as much. At this point I was just about ready to accept any supernatural entity I’d ever heard of existed in some capacity. In fact that might be the best policy moving forward.
“Hey you’re not going to pass out on us again right?”
Bianca asked turning back to me, genuine concern in her voice.
“No, I’ll be fine. The more I hear about this kind of thing the better I am at just accepting it. It’s a lot easier hearing it from one of you guys than having it drop out of the sky at me.”
I joked, walking with Bianca to the door. I noticed my poor attempt at a joke was the first time I said anything about Imalone without feeling like someone would call me crazy. I couldn’t dwell on that for too long right now though, I had to drop off the groceries that had taken me a full day to get. In hindsight though, I’ve had worst trips to the grocery store.
The next few days passed without any real issues, I got things set up in the house and ordered some furniture with the money I got from Bianca. On the second day I figured I should go out and explore the town a bit. I was getting bored being cooped up doing normal things and apparently I wanted to throw a wrench in all that.
“Maybe a bar” I thought to myself as I walked out the door just as the sun had started to think about setting, “Those are always a good place to meet people”.
This is where I tell you I may be just a little awkward. Even back home I didn’t really get out and meet new people much but I figured now is as good a time as any to start. I threw together a quick outfit with the clothes I brought with me from home. Hopefully I looked at least a little bit presentable in khakis and a red dress shirt. I walked out my door and immediately saw Bianca’s house peering out over the town. I considered dropping by to see if Bianca wanted to join me. I had told her about the reasons I ended up in Eagles Peak but I still knew precious little about her. I assumed her past wasn’t all sunshine and rainbows. I wanted to know what exactly drew someone like her to a sleepy little town like this. Maybe seeing if she wanted to join me would be a good opportunity to learn something about her? It’s entirely possible I just wanted to spend more time around her because she was drop dead gorgeous. Maybe it was because she was the first person I bumped into in town? I couldn’t put my finger on it and if we’re being honest I didn’t want to admit the real reason to myself.
That would have to wait for another day though. I had spent so much time thinking about it that by the time I snapped back to reality I was by the greyhound bus stop, well past her house. There was another bus stopped there and people were getting off of it. None of them looked like what I would call a local but its not like I’d really know what a “local” looked like here anyways. Still, this town couldn’t get this many visitors right? It was weird but probably had a completely reasonable explanation.
“The Eagle’s Roost” read the sign above the bar’s entrance, it was actually a pretty high class looking establishment. The fresh red paint gleamed against the faded whites and grays of the other buildings on the street. Inside, a well polished dark wood floor greeted me. The room was completed by a roaring stone fireplace and a well used set of stools by the counter.
“Hey there! Anyone home?!”
I called out into the empty bar.
“Give me a minute!”
Replied a deep gruff voice form the back room. Eventually a man emerged from the room, well I say man but what I mean was a mountain in human form. This guy had to be about 7 feet tall and built from solid granite. Seriously, the muscles on this guy would’ve put The Rock to shame.
“Little early to start drinkin’ isn’t it?”
The mountain grunted judgmentally.
“Well I’m new here I just wanted to see the town. I could come back later if you want.”
“New, why didn’t you say so! New here, I haven’t seen anyone new here in years! come sit down if you’ve got questions about this place I can probably answer them!”
The now elated giant boomed at me. He turned hospitable in an instant, offering me a drink on the house for his poor manners before. His name was Tucker and he’d come to the town years ago as a foreman for it’s mine. The mine dried up and the workers moved on but something about this town spoke to him and he decided to stay. He opened up this bar and the rest is history. Something about the way he talked about the mine did’t sit right with me though. He kept mentioning how it dried up like he was trying to convince me that was what happened. Plus a mine out here didn’t exactly make much sense to me.
“So you run this place alone then?”
I asked, more to be polite than out of genuine curiosity. We had started to run out of things to talk about after conversation about the mine dried up much like it apparently had.
“Never needed any help besides my wife’s, but most days I just run the place alone, yes. No sense in hiring help here, not many people looking for work outside of the ones working at that grocery store down the street. Anyways I should get back to work, its getting to be about time we actually open to the public.”
I turned my head to look at the sign I now realized was stuck to the door. “Eagle’s Roost Hours: 6PM-1AM every night”. I realized with embarrassment I had walked through the door an hour before opening. Tuck had been nothing but friendly though, and I almost felt bad for assuming the locals like him would want to shoo me away. After all, everyone I’d met so far had been nothing but nice, not including Rocco that is.
As I turned my attention back to my drink I thought about the mine again. I hadn’t seen any records of the mine Tuck mentioned in my internet searches of the town before I came here. Honestly it had been incredibly difficult to dig up anything on the town. I wasn’t necessarily the most thorough in my search, but mines tend to be a staple of the towns they’re located in. This mine in particular seems to be what the town was built on. I’m not sure what had me so worked up on this mine issue but I was sure it was important. I sat there at the bar, mulling it over and sipping on my drink when a hand slapped down on my shoulder.
The man it was attached to said something but I couldn’t catch it even if I wanted to. I was far to laser focused on the mark seared black into the mans hand, the exact same eagle that was burned into my back. I pushed him off and bolted for the door, all I heard behind me was the mans confused “What?” And Tuck shouting at him.
“Now what in the Blazes did you do to the poor kid Robert!”
I shot off into the street from the bar, no one was chasing me but the fact that the symbol was here had set me off like a deer running from a gunshot.
“What the hell happened to you?”
Called a now familiar, heavily accented voice from the alleyway.
“Rocco, what are you doing out here?”
I questioned, bewildered at finding him out in the open. I’d never admit it but seeing a familiar face, even Rocco’s, calmed me down a little
“I’m a raccoon in an alleyway, what do you think I’m doing, fishing? No, I’m rootin' around in the trash, Frank needs some lithium foil and he can’t be bothered to run out and buy some batteries himself, stingy bastard.”
He retorted, looking for all intents and purposes like a normal raccoon at the moment.
“Even if I were to guess I wouldn’t have even come close to that.”
“I live to surprise”
Rocco sneered, taking a bow dripping with sarcasm.
“Anyways Frank is back at the house right? There’s something I’ve got to tell him.”
I asked, turning and running as soon as I got a response in the affirmative.
“Yeah he is, what exactly is so importa…. And he’s gone”
I made it to their strange high house in record time and burst through the door like I owned the place. For some reason Bianca seemed completely unfazed as I crashed into the entryway without so much as a knock.
“You know, you don’t live here right?”
“Oh yeah, good to see you too Bianca. Anyways, were is Frank, or Stein for that matter I’ve got something to ask.”
“They’re in the basement.”
Bianca said pointing to the door without looking up from the book she was reading.
Her dismissive attitude didn’t even register to me as I made my way down the basement steps. I got to the bottom and an acrid scent assaulted my nostrils.
“Do I even want to know what that is?”
I called into the basement, announcing my presence. Frank emerged from a room to my side decked out in a full lab coat and goggles along with a hairnet to protect what little of his still remained.
“What do you need?”
“You guys seem to know a lot about the supernatural right? Well, does this symbol mean anything to you?”
I said pulling off my shirt and turning my back to show him the mark that woman had left me with. His reaction could best be described by the sound of shattering glass as he dropped the beaker he was holding as he saw the symbol.
“Where did you get that?!”
He yelled more than asked.
“Back in Imalone.”
“Imalone? What’s that supposed to mean?”
It dawned on me that I hadn’t explained it to him like I had Bianca, so I filled him in. I told him the whole truth this time, where the mark came from, what really drove me to Eagles Peak, all of it. Frank listened diligently looking more concerned by the minute, at some point Stein joined him. A similarly shocked look was plastered across his face. I swear he was turning white when he answered my question.
“It’s the mark of the Thunderbird, and from what you told us, you met… her in person.”
“So why do you look so worried about it?”
I asked, feeling a little worried.
“Well she’s marked you personally, most people that have that mark would’ve gotten it to show devotion or allegiance and it certainly wouldn’t have come directly from the Thunderbird.”
The way Stein talked about this “Thunderbird” made me think I may be in even deeper shit than I realized.
“So do you two actually know anything about the Thunderbird?”
I asked, hoping these two would know something considering their long study of the supernatural.
“Until recently I only knew of the native legends surrounding the creature. I heard of people marking themselves with that symbol so I assumed there must be some truth to the legends. But neither me nor Frank has ever seen the Thunderbird, much less seen it..er, her take a human form.”
Stein answered, sounding almost disappointed in himself. I got the sense that not knowing something like this really ate at him. Which was just further proven by what he said next, a grin suddenly appearing on his face.
“Frank, I think we have our next big research project on our hands then.”
“I’ll start pulling any records I can find of accounts like Keith’s here.”
Frank said, hurrying over to a computer in the basement corner that looked ancient.
“Yes and compare those to the various legends surrounding the Thunderbird.”
Stein responded, rifling through a row of cabinets against the far wall.
Those two seemed to be whipped into a frenzy by something they knew next to nothing about being dropped in their laps.
“Guys… Guys! Can we hold off on going full mad scientist mode for just a second I’ve got one more thing to ask!”
I yelled trying to get their attention. when they turned to me I could see the spark in both their eyes as they hastily responded in unison.
“Yes, what!”
“Have either of you heard about a mine in this town? Tuck at “Eagle’s Roost” mentioned it but I don’t remember seeing anything about it when I looked into this town.”
“Ah the mine, it’s out in the forest north of town somewhere. There was a collapse or something a few years after it opened and the town covered it up. It would’ve been very embarrassing for them to admit the screw up so they just… didn’t, that’s all there is too it.”
Frank answered, seemingly bothered by the mundaneness of that question.
“So the mine is still out there then?”
“Of course! What did you think it just walked away? No, leave us be we’ve got work to do.”
Stein snapped.
As I left the two to their business and made my way out of the house I ran into Rocco, several grimy batteries grasped in his paws.
“They uh… I don’t think they’ll need those batteries anymore bud.”
“God damnit! That’s what I get for trying to be helpful.”
Rocco yelled, as he threw the batteries against the wall. I had to chuckle at the absurdity of it all. Here I was walking past a talking raccoon on his way down to two scientists looking into a Thunderbird. That’s a real thing that’s currently happening to me. Just a few days ago simply seeing Rocco knocked me out almost immediately and now he was just a minor inconvenience. Could it be that I was actually adjusting to all the crazy things that had been happening around me? I sure thought so.
Upstairs, Bianca was still nose deep in her book at the kitchen table.
“Hey can I ask you something?”
“Yeah sure, what is it?”
“Ever been into the woods around town? There’s something I want to check out there.”
“I don’t usually leave the house all that much if I’m honest.”
Bianca answered, a touch of sadness in her voice.
“Do you want too? Leave the house I mean.”
“What are you getting at?”
“Well, I’m going to be headed out there tomorrow looking for the old mine.”
“And why are you looking for that?”
She questioned suspiciously.
“I have a feeling it has something to do with the mark that woman… and I forgot I didn’t tell you about that.”
Bianca looked up at me as she said with a smirk.
“I knew there was more to that story from the other night. Why didn’t you tell me?”
I’ll spare you the details but needless to say I told the story again. I really need to start bringing everyone together when I do these things, it would save me time.
“So that’s why you came here, and you think this mine has something to do with it?”
Bianca exclaimed excitedly. I could almost see the lightbulb going off over her head.
“Yeah that’s pretty much it, do you want to come with? I mean you don’t have to go but I”
She cut me off,
“You know what maybe I should go. Two sets of eyes gives us better odds right? And you have a bad history with forgotten places I seem to recall.”
Bianca said with a coy smile.
“That’s what we’ll do then, I’ll get some things ready and stop by tomorrow, we’ll leave from there.”
And before she had a chance to rethink her answer I left feeling pleased with myself.
My next stop was the hardware store on the other side of town. Of course I still had my travel bag from the good old Imalone trip but I figured I’d pick up some more tools that could come in handy.. I ended up with two heavy duty flashlights, some work gloves of various sizes cause I had no idea what size would fit Bianca, and a set of bolt cutters. It was only when I got up to the counter and the clerk gave me the stink eye that I noticed my mistake.
“You planning to break into something kid?”
Questioned the older guy cashing me out. I responded before my brain caught up with my mouth.
“I was planning on it but you guys didn’t sell balaclavas. So I guess I’ll have to wait.”
The man eyed me for a second then burst out laughing as he handed me my things. Which was good because I knew a few places back in Wisconsin where pulling that would’ve got me pulled into a backroom for questioning. Not a lot of people knew how to take a joke back home. Weirdly enough it was the first time I thought of home since coming here. Obviously I had family back there but we weren’t exactly close like I said before. I just found myself missing the familiarity of the area I had lived in for the past 24 years of my life. I think that’s why I came to the decision to call my mother when I got home later that night.
The whole walk home I had this strange feeling of being watched. No-one was there, I’m sure because I checked… several times. But even as I locked the door to my house and starting sorting out a bag of supplies for Bianca, the feeling didn’t go away. As I pulled out my phone to call my mother the feeling finally faded into the background as I got her familiar answering machine.
“Hi, you’ve reached Carla, leave your name and number after the tone.”
Straight and to the point as quickly as possible, that was the best way to describe mom and it showed even in her answering machine.
“Hi mom I bet you’re wondering where I ended up. Well I’m in New York now, in a sleepy little town. Its nice really, I already met some new people they’re… well they’re a bit strange but I think I might fit in with them. I’m still looking for a job but I had a really well paying temp thing the other day so I’ll be fine for a little while. Anyways, hope you’re doing well, love you.”
I teared up a bit as I ended the call, I hadn’t called my mother in at least a year. She never checked up on me and I never checked in with her. We’d see each other at family gatherings and talk but outside of that I didn’t really contact her much anymore. It was sort of a mutual agreement that we both had, we assumed the other was alright. But being this far from Wisconsin, this far from home, had finally caught up with me. I wanted to at least hear her voice, even if it was just a recording.
As I finished up packing for tomorrow I was quite proud of myself. I’d thought of just about everything, I dug some old hiking boots out for myself and some rope from my old travel bag. Several different sets of flint and steel and about three days worth of dehydrated food adorned the top pocket of both bags. I’d even found an old water purification kit that ended up in one of the duffle bags I brought from my apartment. In short, I was the most over prepared for an excursion like this I’d ever been. It did help push back the eyes I felt peering at me from somewhere over my shoulder, the feeling of being watched still not leaving me. Once I laid down and tried to fall asleep the feeling only intensified. Sounds of rolling thunder in the distance reminding me of my time in Imalone and the fury of the storm the Thunderbird brought. I felt strangely confident as well though, tomorrow Bianca and I may finally start to uncover some answers as to why I felt called to this town, and maybe even what this mark could mean for me.
2024.05.18 23:41 Sweet-Count2557 Best Travel Toys For 5 Month Old
 | Best Travel Toys For 5 Month Old submitted by Sweet-Count2557 to worldkidstravel [link] [comments] Exploring the world with a baby can be an exciting adventure. But, while they may not have any say in where you go and what you do, it’s important to bring along some of their favorite things too! Choosing the right travel toys for your 5 month old is essential for ensuring that both your little one and yourselves are happy on the road. As a travel expert specializing in infant journeys, I'm here to guide you through selecting the Best Travel Toys For 5 Month Old that will keep them entertained and content during those long car or plane rides! Rattles And Teethers Traveling with an infant can be a daunting task, but it doesn't have to be! With the right travel toys for your 5-month-old baby, you can make sure that every journey is enjoyable. Rattles and teethers are essential for any trip - they give babies something to hold, soothe them when upset, and provide hours of entertainment. For traveling purposes, lightweight rattles are ideal - look for ones made from soft materials like cloth or silicone, as those will easily fit in a diaper bag. If possible, find options that come with different textures and shapes; this way you'll keep your little one's attention longer. Soothing sounds are also key: pick out some musical options that will help lull them into peaceful slumber while on the go. When choosing rattles and teethers for your 5 month old baby, always consider portability and convenience over size and complexity. Traveling should never mean sacrificing comfort; by equipping yourself with the right tools you can ensure your child has all the sensory stimulation they need without having to lug around extra items along the journey. And who knows? You might even enjoy it too! Books And Music Now that you have chosen the rattles and teethers for your 5 month old, it is time to think about other toys they can enjoy while traveling. Books and music are great options since they both provide an educational opportunity as well as entertainment during long trips. For books, look into interactive ones with bright colors and fun characters. These types of books will keep your baby entertained throughout the journey: A touch-and-feel book with different textures on each page An alphabet board book that teaches letter recognition A pop-up book made from sturdy paper that stands up to wear and tear Interactive music is also a great tool for keeping your infant engaged during travel. Consider these musical items: A toy instrument like a xylophone or drum set so your little one can make their own tunes Educational songs featuring animal noises, counting, letters, etc. Playlists of calming classical music for naps in transit With books and music at hand, you'll be able to create a learning environment no matter where you are! Keep in mind that safety comes first when selecting any type of toy; always double-check age recommendations before purchasing anything for your 5 month old. Soft Toys It won't be long before you and your 5-month old baby are packing up the car for a road trip. As an expert in infant travel, I recommend having soft toys, to keep them entertained as well as comfortable during their travels. Here's a list of some of my favorite travel toy companions: ToyAge RangeWeightTeddy Bear Rattle0+ Months2 lbs.Cuddle & Coo Owl3+ Months.99 lbs.Soft Book0+ Months1 lbLamaze Activity Gym0+ Months4 lbs. Soft toys are great when traveling with an infant because they provide sensory stimulation through bright colors and engaging textures. They also give babies something familiar to hold onto while exploring new sights, sounds, and smells on the open road. Plus, they're small enough to fit into diaper bags or backpacks without taking up too much space! When it comes time to say goodbye to home comforts, these beloved friends can serve as a reminder that no matter how far away from home we may go, there will always be something along for the ride that is sure to make us feel loved and secure - even if it’s only just a little plush bear rattle! Activity Mats Traveling with a 5-month old can be both exciting and daunting. To make it easier, having the right travel toys is essential. Activity mats are perfect for keeping your baby entertained during long trips. They’re lightweight, foldable, and easily stored away when not in use. Plus they come in many different designs that promote imaginative play and sensory exploration through tactile materials. Activity mats provide endless hours of fun at home or on the go because they’re made from durable yet soft baby-safe materials like cotton and foam which makes them travel-friendly too! Your little one will love exploring all the textures and colors of the mat while developing motor skills as well as hand-eye coordination. They’ll also love getting lost in their own world of pretend play using various shapes, patterns, and objects found on the activity mat! Your 5 month old deserves to enjoy every journey with you just as much as you do! With an activity mat, they won’t only have something entertaining to play with but something that promotes learning too – making it a win-win situation for everyone involved! So why wait? Get creative with your travels by investing in some portable toys that your baby can cherish no matter where life takes them. Stacking Blocks And Puzzles Ah, the joys of traveling with an infant! Nothing quite compares to it. It's a special time - and one that can be made even more enjoyable when you have the right travel toys for your 5-month old little one. Here are some ideas that just might make life on the go a bit easier: Stacking blocks and puzzles: These are great for helping babies develop their fine motor skills while learning about colors, shapes, numbers, letters and other concepts. Not only do they provide hours of fun but also help create strong cognitive connections in young minds. Building Blocks: This is another favorite among five month olds because they allow them to experiment with gravity as well as discover new ways to build structures by connecting pieces together. Plus, building blocks come in all sorts of colors and shapes which helps stimulate tactile senses as well sensory development too. Sensory Toys: Finally, consider investing in a few sensory toys (rattles, teethers, or stuffed animals) that will help engage the baby’s sense of hearing, touch, and sight while on the move. Just make sure they aren't too noisy so as not to disturb other travelers! Traveling with an infant doesn't need to be stressful – especially if you plan ahead and pick up a couple of age-appropriate items like stacking blocks or puzzles before heading out on your journey. With these simple tips in mind, you'll be able to enjoy yourselves during those long days spent away from home without breaking the bank either! Push And Pull Toys When it comes to traveling with a 5-month old, push-and-pull toys can provide an invaluable source of entertainment. From bouncy seats to travel strollers, these items are guaranteed to keep your little one engaged during even the longest trips. If you're searching for something that's easy to transport and set up quickly, a bouncy seat is ideal. Its lightweight design makes it simple to move from place to place without taking up too much space. Plus, its soft material is comfortable enough for prolonged periods of use. Travel strollers offer more stability than traditional ones due to their durable frames and tight turns capabilities. The ergonomic handlebars make them particularly convenient when navigating busy streets or tight corners in airports. Furthermore, they contain ample storage compartments so parents can easily store all the essentials while on the go – like snacks, extra clothes, and diapers! All in all, push and pull toys are must-haves for any parent looking for a stress-free experience when travelling with young babies. Activity Centers When it comes to travel toys for a 5 month old, activity centers offer a great range of educational benefits. Not only can they help promote cognitive development, but they also provide a stimulating environment to help your little one practice their motor skills. Before you buy an activity center, it's important to ensure you're following all safety guidelines to ensure the safety of your baby. Educational Benefits When it comes to educational benefits, activity centers are a great way for 5 month olds to learn and develop new skills! They're designed with language development and motor skill growth in mind. Plus, the bright colors and fun sounds provide plenty of stimulation for their growing minds. And when you're traveling, these all-in-one toys can be easily packed away or even attached to the stroller so your little one has access to them wherever they go. With an activity center, you can rest assured that your child's learning process is not put on pause during your travels - allowing them to continue to grow and have fun along the journey! So why wait? Invest in an activity center today for your 5-month-old traveler – because nothing beats being able to take education on the road. Motor Skill Development As a dedicated travel expert and consultant for baby/infant travels, I know how important it is to help your little one grow even while on the go. Motor skill development can be achieved in many different ways with an activity center! Playing with buttons, pulling strings, pushing levers, or turning knobs - they're all great ways to enhance their motor skills. Plus, these activities will also encourage socializing as you talk about what each part does. What's more? These toys are designed so that they can easily transition from playtime to bathtime without any fuss. So don't wait - get an activity center today and watch your child learn new skills wherever the road takes them! Safety Guidelines When traveling with an infant or toddler, it's important to consider safety guidelines. This is especially true when using activity centers! Make sure that the center has a secure base and won't move once placed on any surface. Additionally, avoid leaving your little one unattended for long periods of time - even if they are sitting in their activity center. Babysitting tips such as having another adult present can help you enjoy some well-deserved freedom while still keeping your child safe. Don't forget: use common sense and make sure all parts are age appropriate before letting them play! With these simple rules, there's no reason why both parents and children alike shouldn't be able to travel safely while enjoying the benefits of an activity center. Baby Gyms The activity centers are great for keeping your 5 month old occupied at home, but when it comes to travel safety and entertainment on the airplane, baby gyms have you covered. Baby gyms come in different shapes and sizes that easily fold away so they can fit into your carry-on luggage with no problem. Many of them even come equipped with a mirror, hanging toys, and activities designed specifically to stimulate developing minds. Baby gyms provide ample opportunities for exploration during flights, as well as being safe enough to use in confined spaces like an airplane cabin or hotel room. You don't need to worry about loose parts or small pieces getting lost; most models incorporate all the elements into one interactive unit. Traveling parents will also appreciate that the setup is quick and easy – just unroll it from its compact carrying case and pop out the connecting rods - so there's plenty of time left over for exploring new places! These versatile items make long journeys more enjoyable by providing endless hours of fun without taking up too much space in your travel bag. Plus, given their unique designs, your 5 month old won't be able to resist discovering what lies inside these colorful play areas! Playpens As a travel expert specializing in baby/infant travel, I recommend playpens as one of the best options for keeping your 5 month old safe and entertained during trips. Playpens offer convenience and portability, allowing you to keep an eye on your little one wherever you go. Plus, they can make any unfamiliar environment more secure and comfortable for babies. Here are some tips when choosing the right playpen: Look for models with adjustable heights so that it can grow with your child’s needs. Select lightweight designs that fold easily and come with carrying cases or straps for extra mobility. Choose materials that are easy to clean and transport without taking away from comfort. Make sure the playpen meets safety standards like ASTM International Standards before purchasing. When traveling with your infant, it's important to have a secure place where you can set them down safely while still having access to their belongings such as toys or diapers. Playpens provide peace of mind by giving parents control over their child’s surroundings without sacrificing freedom or spontaneity of movement during holidays or excursions abroad. The key is finding a balance between practicality, portability, and kid-friendly features—playpens provide just that! Stuffed Animals Stuffed animals may seem like a classic, but often overlooked option when it comes to travel toys for 5-month-olds. But don't be fooled: they can provide just as much comfort and entertainment on the road as all those other fancy gadgets. Portable cuddles and soft sensory stimulation are what make these playthings so great – not to mention that there's something special about loving a stuffed animal from infancy through adulthood. One of the best things about travel toys in this category is their size. Tiny teddy bears, bunnies, and dinosaurs fit easily into carry-on bags (or even pockets) without taking up too much space or adding extra weight. These small wonders also come at an affordable price point, allowing parents to stock up on multiple items without breaking the bank. Plus, since most babies love snuggling with something soft, it's easy to find one that suits your little one's individual preferences. You can have some fun playing around with different textures when you select your baby's new companion. Experimenting with fabrics like plush fur and corduroy gives them plenty of tactile exploration opportunities while providing comforting companionship whenever needed during your travels together. So go ahead and give the tried-and-true stuffed animal a chance: odds are it'll become your infant's favorite toy in no time! Frequently Asked Questions What Age Should My Child Be Before I Start Traveling With Them? When it comes to traveling with your infant, the most important factor to consider is their age. Generally speaking, you should wait until at least 6 months before beginning any kind of travel plans for a baby - this gives them time to build up an immunity and strength in order to handle the stresses and environmental changes associated with being on the go. Additionally, having all your packaging essentials (diapers, wipes, formula, etc) ready beforehand will help make sure that everything goes as smoothly as possible when you leave home. When done right, traveling with a young child can be a fun and rewarding experience – just remember to plan ahead! How Much Should I Spend On Travel Toys For My 5 Month Old? When it comes to travel toys for your 5 month old, one of the most important things to consider is how much you should spend. As a travel expert specializing in baby and infant travel, I recommend carefully selecting quality toys that suit your budget so that both mommy and baby can have an enjoyable trip. With such a wide selection available nowadays, there are plenty of options when it comes to finding the perfect toy - just make sure they meet all traveling requirements! Taking into account cost as well as safety and entertainment needs will help ensure a successful journey with your little one - allowing freedom to explore while still having peace of mind. Are There Any Safety Considerations To Keep In Mind When Selecting Travel Toys? When selecting travel toys for your 5 month old, it is important to consider safety first. Choosing materials that are non-toxic and durable will ensure your baby's health and well-being. Additionally, you should look out for toy features such as removable parts or button attachments that could present a choking hazard. As a travel expert specializing in infant travel, I highly recommend considering these factors when choosing the best travel toys for your little one! How Can I Make Sure That My 5 Month Old Stays Entertained While Traveling? Traveling solo with a 5-month-old can be quite the challenge, especially when it comes to keeping them entertained. However, with some clever planning and socializing tips, you can make sure your little one has an enjoyable journey. You'll need to select toys that are age-appropriate, small enough to fit in their bag, and safe for travel use. Look for items like teething rings or rattles that will keep them interested while also helping them learn new skills such as grasping and reaching. Additionally, provide plenty of stimulation through conversations and songs during long trips! With these strategies in place, you can ensure a fun-filled adventure for both parent and baby alike! How Often Should I Replace Or Upgrade My 5 Month Old's Travel Toys? A travel expert's dream, upgrading and replacing your 5 month old's travel toys are an absolute must for parents on the go! To make sure that your little one stays entertained while traveling, you should always have a variety of toy types and travel gear readily available. From teething rings to stuffed animals, there are countless options that will help keep them content no matter how long their journey may be! With the right selection of toys and a bit of creative thinking, you can ensure that your baby stays happy and occupied - making it easier than ever to explore new places together. Conclusion Traveling for a 5-month-old can be daunting, but it doesn't have to be. With the right travel toys and safety considerations in mind, you'll be able to ensure your little one stays entertained while on the go. You don't need to break the bank when selecting toys; investing in a few good quality items that last is key. It's also important to keep an eye out for upgrades as your baby grows. As long as you're prepared, traveling for a 5-month-old is like taking a journey of discovery - full of fun surprises along the way! |