RELEASE NOTES 1.35.21.0
If you are playing on PC, outdated packages in your community folder may have an unexpected impact on the title’s performance and behavior. If you suffer from stability issues or long loading times, move your community package(s) to another folder before relaunching the title. How to install a new update safely
NEW CONTENT/FEATURES Added flight plan assistance setting for ATC in the user experience assistance settings so that users can request the ATC to favor their flight plan or world map flight settings over the current conditions. This assistance is set to “Active” by default. Active: ATC will set the active runway and approach for the departure and arrival airport based on the users flight plan or settings in the world map. Deactivated: ATC will set the active runway and approach based on current conditions only. ATC now clears a step to the next altitude some time before arriving at the previously cleared altitude, rather than once arrived at the previously cleared altitude. (Next step is issued when at 2000FT from cleared altitude rather than 250FT from cleared altitude). ATC Vectoring bug fixes: Now assigning the correct clearance when the first two waypoints were one over the other, Now assigning a new vector & clearance every time the user asks the ATC for a new vector. Added completely new Cirrus SR22T G6 model with custom engine simulation, book-accurate performance, and extensive Perspective Plus NXi features.
GENERAL BUG FIXES Several crashes have been fixed across the title Fixed localization bugs Performance optimizations for long flights. Fixed ATC that was mixing voices in localized languages Automated Weather Report temperature reading updated
MARKETPLACE Fixed an issue where the Wishlist would not sort properly in the Marketplace
MENU Fixed freeze when opening the logbook
NAVIGATION/TRAFFIC Enhanced ATC phraseology. Some of the improvements include: The removal of the word ‘for’ in altitude change requests. Eliminating the requirement to include altimeter settings in takeoff clearances.
WEATHER Snow and ice coverage accuracy has been improved in live weather Fixed an issue where the wind from a malformed METAR was incorrectly read Fixed an issue where the sim occasionally retrieves obsolete weather data Improved transition during cloud coverage updates AND fixed an issue where clouds don’t load when starting a flight.
GLASS COCKPITS GARMIN G3000 / G5000 Fixed an issue where removing an airway entry leg from the flight plan could sometimes corrupt the flight plan.
G1000 NXI Added support for hardware keyboard with new AS1000CONTROL_PAD H events. Fixed an issue where removing an airway entry leg from the flight plan could sometimes corrupt the flight plan. AP: Added support for LVL and TO/GA modes MFD: Added Page Menu popup for MFD’s Nearest Airports page. CAS: PFD Alerts softkey indicator now flashes color and changes to appropriate label with CAS messages CAS: Pressing PFD Alerts softkey now acknowledges CAS messages and cancels aural chimes CAS: Alerts now display in order of priority and time first seen SIM: Added support for knob-based XPDR code entry using H events. For aircraft developers: Made all methods in PFD and MFD plugins optional. Exported NavSystems’s class FrequencyItem and its props interface FrequencyItemProps. CAS messages may now be assigned associated Alerts messages via JS and/or plugin code Added support for control pad entry for Constraint Selector in the FPL dialog Added support for LVL and TO/GA autopilot modes Added support for control pad entry on several UI input components Added support for styling the Com selection based on the radio selected to transmit, and for both Nav and Com standby frequencies selected to edit WT21 For aircraft developers:
Added configurable side button support to the WT21
AIRCRAFT GENERAL Payload station weights that are set via SimConnect are now properly displayed in the Weight&Balance toolbar panel. Fixed – L-39 Pipsqueak – Unable to enter values by double-clicking on GNS screen Fixed – L-39 Sarance – Unable to enter values by double-clicking on GNS screen Contact Points compression under some kind of roof (bridge, cave, arch, etc.) was fixed Fixed – P-51D LadyB – Unable to enter values by double-clicking on GNS screen Aircraft Registration can no longer be lowercase Fixed – P-51D Miss America – Unable to enter values by double-clicking on GNS screen Fixed – P-51D Strega – Unable to enter values by double-clicking on GNS screen Fixed – T-6 Baby Boomer – Unable to enter values by double-clicking on GNS screen Improved aircraft simulation stability (few potential crashes were fixed) Fixed – T-6 Undecided – Unable to enter values by double-clicking on GNS screen Corrected an issue that could prevent cockpit interactions from working in some rare conditions Correct many false positive errors regarding InputEvents when loading AI planes Corrected an issue that would cause some P51 to lose power in reno races. Fixed an issue that could cause the state of Avionics circuit depend features to be toggle on and off when no MarkerBeacon circuit was present It is now possible to slow down the simulation speed to 1/8 and 1/16 of real time. EXTERNAL HUD Minimized HUD can now display more than 8 engines power values HELICOPTERS Anti-stall protection is now disabled for helicopters. AIRBUS 310-300 A310 Radio Stuck Broadcasting on KSNS ATIS After Departing KSFO. Vertical speed knob labeled as “altitude knob” in tooltip. AIRBUS A320NEO (V2) During testing of the A320neo, we encountered an application crash rate on console that is too high to pass certification. We need to address this issue before the A320 can ship. BELL 407 Rotor weight changes. Rotor brake force adjustments. Rotor blade dynamics adjustments. Throttle/governed RPM during startup and shutdown. Engine performance changes. Fuel management on the weight and balance settings. Performance data on the aircraft selection screen. Localization text changes. FADEC tooltip. Fuel Pressure gauge illumination. Cold and dark state changes. Checklist correction. Fixed checklist AutoStart. AutoStart sequence now works. BOEING 787-10 / BOEING 747-8I General performance optimizations for consoles and some hardware configurations W&B: An operational CG margin is considered now to avoid extreme CG values when loading the aircraft. SIM: ATC will now know about your planned cruise altitude and will assign you a flight level accordingly. CHECKLISTS: Fixed bug where checklists that only contain closed loop items would sometimes be skipped when entering the checklist page if all items are completed. [787] CHECKLISTS: Fixed flaps checklist items being completed before the flaps reached the selected position. [787] W&B: Corrected movement of the CG as fuel is burned by moving the tanks to the exact locations of those on the real plane. [787] EFB: Support clearing of the TOW field. [787] EFB: Cap the achievable MTOW at the certified limit of the plane. [787] EFB: Correct error message when current TOW exceeds the achievable MTOW. [787] EFB: Added Automatic brightness adjustment. [787] EFB: Fixed spelling errors. [747] SYSTEMS: Reserve fuel transfer will now not stop once started mid flight. CDU: Fix takeoff speeds being invalidated when opening TAKEOFF REF on the copilot side CESSNA CITATION CJ4 SIM: ATC will now know about your planned cruise altitude and will assign you a flight level accordingly CIRRUS SR22T G6 Completely brand-new art and model of the SR22T G6 GTS. Completely reworked flight model and performance featuring: CFD with book accurate performance and pilot tested handling. Modern propeller system. New turbo and fuel engine systems. Custom ECU, engine computer, and EGT/CHT simulation. Custom lean misfire, detonation, and engine failure simulations. Full Perspective Plus features implemented for G1000 NXi, including: Full-screen engine page with anti-ice status and fuel flow targets. Full-screen fuel management page. Weight and Balance page with graphical CG envelope. Trip planning page with automatic and manual modes. Massive suite of interactive checklists. MFD destination inf-box. PFD power gauge, GAGL indicator, GS and TAS. Frequency loading menus on airport and waypoint inf-pages. FIKI (Flight int-Known Icing) and TKS simulation. Stabilized approach system with PFD alerting and monitoring for: Bar-mismatch, crosswind, tailwind, flaps, lateral deviation, and vertical deviation (GS and GP). Updated EIS with custom reversionary mode version. Lean assist, fuel flow green band, and cyan fuel flow lean target indicators. Fully modeled GCU479 Garmin Control Unit keypad with all entry modes. Additional new autopilot mode support including LVL, TO, and GA. Large suite of accurate CAS messages including new G1000 NXi alerts acknowledgement and menu behavior. CURTISS JN-4 “JENNY” Fixed – [KO-KR] Some instruments in cockpit are not localized in Korean in Curtiss Jenny. Fixed – [Localization] Livery names are not localized in liveries page. Fixed – [pl-PL] Missing/untranslated words in checklist. Fixed – [TR-TR] Some instruments in cockpit are not localized in Turkish in Curtiss Jenny. DAHER TBM 930 Fixed broken autopilot panel backlighting. DOUGLAS DC-3 Fixed starting engine in Multiplayer causes other DC3 engines to animate starting Fixed overlapping words on the warning labels inside the cabin and on the rear cabin door. (Enhanced) Fixed Radio altimeter appearing off above 400ft. Classic 8-way Quick view controls fixed during flight. Fixed fuel pump does not indicate fuel flow from Cold/dark until after mesh switch is engaged. (Enhanced) Improved low resolution text in the Enhanced Edition cockpit. (Enhanced) Fixed missing panel texture for Beacon light. (Enhanced) Fixed HUD not correctly indicating state of flap. Fixed Decision height/Radar altitude setting knob setting does not match panel texture. Fixed fuel pump not indicating fuel flow from Cold/dark until after mesh switch is engaged. GRUMMAN G-21 GOOSE AI copilot completes checklist items for you in Evaluation mode. Attitude Indicator doesn’t provide pitch indications. Fuel drawn from wrong tank when starting Cold & Dark. Part of tooltip description for Magneto Cutoff not localized. Unable to toggle “taxi light” in cockpit–must use key binding. H-4 HERCULES “SPRUCE GOOSE” Camera Quick views fixed Engine 5-8 throttle fixed when using a gamepad ROBIN DR400 Fix Flaps looking misaligned with the wings in neutral position. RYAN NYP “SPIRIT OF ST. LOUIS” Camera Quick views fixed WRIGHT FLYER Camera Quick views fixed WORLD Used more realistic mapping of wave lengths onto RBG values for the ozone layer scattering and the sun color, resulting in more realistic colors of the sky and the lighting in the world.
TOP-GUN MAVERICK Fix for the aircraft carrier wake in Maverick landing challenge that was missing
PERIPHERALS Various peripheral fixes Pause mapping on the Occulus touch left controller switched from Y to Menu button Anti Ice and Aux Fuel Pump LEDs are now working properly with Bravo Throttle Quadrant
SDK Added new Coherent calls SET_CRUISE_ALTITUDE and GET_CRUISE_ALTITUDE to get/set the planned cruise altitude the in game ATC knows about. Fixed crash when “positive_g_limit_flaps_up” parameter is present in [AIRPLANE_GEOMETRY] section in flight_model.cfg, but one of the parameters: “positive_g_limit_flaps_down” or “negative_g_limit_flaps_up” or “negative_g_limit_flaps_down” is missing. See SDK for details. More parameters have been added to the “[VIEWS]” section of the “camera.cfg” file to control the behavior of the external camera (“external_camera_distance”, “external_camera_follows_heading”, “external_camera_follows_velocity”). See SDK for details. Several features have been added and bugs have been fixed for the skid-type landing gear, which can now be retractable. See SDK for details. Added “set_max_compression” and “spring_exponential_fix” parameters to the “[CONTACT_POINTS]” section of the “flight_model.cfg” file. See SDK for details. DEVMODE Debug old: option to disable 30Km mesh display limit “Exponential Constant” parameter is added to the Contact Point serialization (it was missed) Aircraft debug windows stability was improved Fixed context setting of Material Editor when opening Scenery Editor Added Interactive Points state initialization via .FLT files The “gear_locked_on_ground” parameter in the [CONTACT_POINTS] section of the “flight_model.cfg” file now works for SKI and SKID type retractable landing gear. Fixed random crash when exiting the game with DevMode open AssetReload: Reload gltf lod min size Fixed some scenery option not applied during multiple selection Add SpeakerFullName in DialogAction Improved linear memory size formatting in WASM Debug window SIMCONNECT SimConnect Input Events function can now be used while devmode is disabled SimConnect Input Events shouldn’t crash the sim after going back to main menu (or restarting a flight) Ident and region are now two separate fields while requesting Facilities New Data are available through NavData API (Pavement, Vasi, Approach Lights) SIMVARS Added simvars AIRCRAFT_AGL and AIRCRAFT_ALTITUDE_ABOVE_OBSTACLES Aircraft editor Added an option to delete a parameter from the cfg file, or to reset it to its default value Added rotation Gizmo Added new parameters Added expert Mode to the editor. Expert Mode eliminate all constraint on the editor regarding conditional fields, required parameters or array sizes. Only already existing parameters and modified parameters are saved. This mode allows for greater flexibility of the editor but require more knowledge on how to configure an aircraft. Made NdArrays more flexible, avoid writing too much data per line. Fixed ctrl+f focus that would not focus parameters properly Fixed unwanted or incorrect changes when saving a file in the editor VISUAL EFFECTS EDITOR Fixed visual effect instances not being properly stopped and restarted when the Visual Effects Editor is closed New fixed orientation feature New nodes: Abs, Sin, Cos WASM Fix clipping modes (intersect, complement and Xor) for GDI+ API Fix an error in the dependencies of the VFX Aircraft Sample (and rename the sample from “SampleWasmModule” to “VfxWasmModule”) Fix a bug in CommBus API that cause first registration of an event in Wasm to be ignored CommBus : When register an event in Wasm the triplet [eventName, callback, ctx] can be registered only one time per module CommBus : New function added in Wasm : fsCommBusUnregisterOneEvent CommBus : In JS a CommBusListener has been added

AnkiDroid releases are back to a regular schedule! Highlights of this release are an improved syncing UX, a new design for our previewer, and additional ecosystem compatibility improvements for card browser functionality.
Sending out an additional thank you to everyone who contributed to AnkiDroid during the Google Summer of Code application period, and an additional welcome to our 3 selected GSoC contributors for 2024: Anish, Sanjay and Anoop. If you're on GitHub, give them a follow! We're excited to be back for 2024!
General releases should be rolling out once Google are done with their reviews, they'll be available:

• Play Store (don't forget to give us a rating)
• F-Droid
• Amazon
• GitHub - Parallel Builds for Multiple Profiles

🤜🤛 Thank you! Your donations makes progress like this happen! Donate here💰

Changelog

Features

• Newly designed previewer
• Improved media syncing user experience (enable notifications to enable)
• Added the ability to 'Delete Account' for AnkiWeb (to meet new Google requirements)
• Redesigned 'Set due date' screen, with new options:
  • select from date range
  • optionally update interval
• Updated 'Forget Cards' dialog with additional options:
  • Restore queue positions (where possible)
  • Reset repetition & lapse counts
• Card Browser: Toggle 'bury' status of multiple cards
• Deck Options: Show progress when optimizing all presets
• Reviewer: streamlined 'Check Pronunciation' design
• Previewer: keyboard shortcuts for 'flag' and 'mark'
• Deck Picker: add 'search' keyboard shortcut
• Drawing editor: "undo stroke"
• Note Editor: Hierarchical deck selection
• Deck creation
  • Add a suggestion to fix the [1 > 10 > 2] problem when ordering decks
• Statistics: Hide toolbar on scroll
• Statistics: Match color of status bar with toolbar
• Manage Note Types: Add search bar
• Unused Media: make text selectable
• Too many translations to mention. Thank you!
  • Contribute here: https://crowdin.com/project/ankidroid

Fixes

• Reviewer: Video Playback is now automatic
• Reviewer: Prevent highlights when using a bluetooth controller
• Reviewer: Fix crash with custom study when deleting parent deck
• Filenames displayed correctly when they contain multiple periods
• Removed unnecessary sync reminders
• Deck Picker: Restoring a backup no longer hides the menu
• Creating a new deck no longer immediately displays a 'duplicate' warning
• Tags dialog: fix alignment of ripple animation
• Improved CSS compatibility with Anki Reviewer: word wrap; background alignment; lists and preformatted text are now left-aligned; type answer changes
• Reviewer: audio can now be recorded using JavaScript
• Deck Picker: scroll position is maintained on deleted deck
• fix crash on clicking 'user actions' in preferences search
• i18n: Hebrew localization fixes
• Card Template Editor: fix scrolling issues
• Tablets: Update study options after deleting a deck
• Shared decks: fix 'cancel' icon alignment
• Shared decks: Restrict browser to required websites
• JS API: new/lrn/rev counts are now integers

Anki Changes

AnkiDroid now uses Anki Desktop's backend logic for most operations. Any backend changes from the following have been included:

• Anki 24.04 Changelog
• Anki 24.04.1 Changelog

Release Statistics:

• 442 changes from 41 contributors since 2.17
• Thank you to our 4333 backers on Open Collective 💰
• And our 2041 Translators

If you encounter any problems, please don't hesitate to get in touch, either on this post, Discord [#dev-ankidroid] or privately to me via PM or chat.
Thanks for using AnkiDroid,
David (on behalf of the AnkiDroid Open Source Team)
Full 2.18.0 Changelog 2.18.0 code changes [For developers] AnkiDroid 2.18 on GitHub (issues & pull requests)

🌱 Easiest Setup to ‘getgrass’ and recieve 5000 free points credited to your account with the free sign up link: https://app.getgrass.io/registe?referralCode=au_t_WOWv2wXqBk
🌱 Click the registration link and complete the registration. Once you've signed up and the app has connected, you can open the dashboard where you will see how many points you've farmed and you'll have a referral link in the bottom right that you can copy and promote as many times as you want to, here in the Grass_io subreddit. Send to your friends and family and promote it as many places as you can! 👍✨
🌱 Lastly, Download the Grass Extension on Google Chrome and Right-Click to Pin it to your Toolbar: https://chromewebstore.google.com/detail/grass-extension/ilehaonighjijnmpnagapkhpcdbhclfg?hl=en&authuser=0 ...With this you can quickly monitor the most important pages: Dashboard, Connection, Referrals & Earnings (🔥PRO TIP🔥: If you don’t have multiple computers, you can download “Mises Browser” app on android 🧠) which supports the chrome extension for mobile👌, then send your own referral link to each of those devices… Rinse & Repeat as many devices as you want to create a massive, passive ‘getgrass’ farming chain to earn max grass!✨
✅ That's all! As long as you you're logged in & have the Grass Extension running , you'll be earning grass points. Welcome to Grass, Farmer 🤝🏼👨‍🌾✨

Ready to supercharge your farming journey? Join our community at Grass and unlock a world of opportunities to maximize your earnings! By registering with us, you gain access to cutting-edge tools and resources designed to optimize your farming experience.
Here's why you should join us:

1. Maximize Your Returns: With Grass, you'll have the chance to accumulate Grass points like never before. Our platform is designed to help you make the most of every farming epoch, ensuring you maximize your returns.
2. Community Support: Join a vibrant community of like-minded individuals who are passionate about farming and maximizing their earnings. Share tips, strategies, and insights with fellow members to enhance your farming journey.
3. Exclusive Benefits: As a registered member of Grass, you'll gain access to exclusive benefits and rewards. From bonuses to special offers, there are plenty of incentives to fuel your motivation and keep you engaged.
4. Stay Ahead of the Curve: Our platform is constantly evolving with new features and updates to help you stay ahead of the curve. By registering with Grass, you'll ensure you're always at the forefront of the farming game.

Don't miss out on this incredible opportunity to take your farming efforts to the next level. Join us today at Grass and start your journey towards greater success!
To register and install the Chrome extension for Grass, follow these steps:

1. Registration:
   • Click on the following link to register with Grass: Grass Registration.
   • Fill out the registration form with your details and create your account.
2. Install Chrome Extension:
   • After registering, navigate to the Google Chrome web store.
   • Search for the Grass extension in the store.
   • Click on the "Add to Chrome" button next to the Grass extension.
   • Confirm the installation by clicking "Add extension" in the pop-up window.
3. Login:
   • Once the extension is installed, click on its icon in the Chrome toolbar.
   • Log in using the credentials you created during registration.
   • After logging in, you should see a connected status within the extension indicating that your account is linked and ready to use.
4. Verify Connection:
   • To ensure successful connection, visit the Grass website and log in with your credentials.
   • If the Chrome extension is properly installed and connected, you should see a confirmation message or indicator on the website.

By following these steps, you'll be able to register, install the Chrome extension, and verify the connection to your Grass account. Enjoy optimizing your farming experience with Grass!

I've been working on adapting scrcpy that is a tool for Android device mirroring. I tried to improve its usability for gaming on Apple Silicon Macs. In android studio, frustrations with native controls for games like PUBG, Pixel Gun 3D, and Clash Royale led me to make a customized version that better fits the gaming scene. It is better than nothing for me, at least. After I developed it and after a few days of gaming, I thought it would not hurt to share it
What I added:

• Dynamic Key Mapping: Customize game controls for precision and responsiveness.
• Directional Textures: Visual cues for control orientations to improve gameplay.
• Keymap Settings: Save and open keymap setups with JSON configuration files
• Toolbar: Quick access to control action buttons (back, home, menu, volume, etc.)

This project is super early stage. It’s bas a long way to go and a lot to improve. I’m all ears for ideas and feedback. I just hope it can make gaming on apple silicone macs a bit less headachy.
Check it out here: https://github.com/Oct4Pie/anemu
Also, if you are curious about the code changes, you can look here scrcpy fork: https://github.com/Oct4Pie/scrcpy

Hello, I'm having an issue with my heavily-customized Firefox installation. I have two Macs, a MacBook Pro (2020) and iMac (2019), both olde-worlde Intels. I've customized FF within an inch of it's life, including a drop-down bookmarks' toolbar which pops up when you get the cursor near to the left-hand side of where it drops down from.
This has worked fine for many years. The recent Beta update to v126 broke a few things, like all my menu title bars went transparent and on some the close button doesn't close it.
But the biggest problem was that on the iMac the bookmarks bar wouldn't appear. So I went into userChrome.css and fiddled with it. I also used the 'Customize' settings as this had happened before and telling it to remove title bar / defaults / restore etc. worked. It didn't this time.
If I run in troubleshooting mode, the bar appears where it should be, fixed. So the bookmarks data itself, I think, is ok. If I run as usual with my profile it doesn't appear at all. I've literally taken out all of the code for the toolbar, every jot to do with that area, and nothing changes. All that appears is the #booksmarks-toolbar-menu icon (which I thought I hid but obviously haven't) and if I click that then the bookmarks appear as a submenu of a submenu.
I've made a new profile, then activate the userchrome and usercontent files - all code relating to bookmarks commented out - no change. I've deleted the places.sqlite file and all other similar ones and re-run. I've taken old bookmarks' backups from before all this happened - no change.
I'm sure I clicked something when doing customize toolbars, the bookmarks came into the main display and I dragged them to drop them on where the toolbar normally pops up. If I color that bar all the time, it appears. But it's empty. I've been thru all the code for the various parts of the bar, and the code is identical on the (working) Macbook and (not working) iMac. All I can think is that I've somehow hidden something that shouldn't be hidden. I've compared both and can't see a difference.
I did drag the bookmarks around within the 'Manage Bookmarks' window but again they seem the same structure between the machines, and both work in troubleshooting mode. I've also imported the laptop bookmarks onto desktop but it still doesn't appear. (They are different between the two - smaller screen = less bookmarks on the bar on the laptop to fit, but nothing appears no matter what)
The trouble is that years' old code, edited and borrowed from the marvellous people on here, then augmented and modified over and over again, fiddled with when updates break it, kinda working on top of whatever Mozilla is doing.. I know this isn't a good recipe to make robust, simple, reliable code. So here I am, two weeks of trying anything and everything, and nothing seems to reset the bookmarks - even, as I say, removing every bit of code to do with them at all.
Er, any ideas?

Before submitting a comment about an issue, the #1 thing any user should do when they first experience issues with a new update is to follow these troubleshooting steps.

If issues still persist despite the efforts made in this thread, report the issue to cricut.

⭐⭐Print then Cut users⭐⭐
Calibrate your machine right after an update as your calibration settings will not carry over into the latest update. Follow the advice of the calibration guide. Then do a test print then cut of your project using plain printer paper.
If for some reason after calibration your cuts are still inaccurate, clear cache (the troubleshooting guide above this) and try calibration again.

If you are experiencing issues despite clearing cache, please give some background information:

• Cricut machine (Joy, Joy Xtra, Explore Air 2, Explore air 3, Maker, Maker 3, etc.).
• Device (Windows 10, Window 11, Mac, iPhone, iPad, Android).
• Type of project you were attempting to do. (Basic cut, print then cut, drawing, foiling, scoring, etc.)
• Were you successful in doing this project in the past? Or is this a new project?

What has changed (Desktop v8.29.66)? Update on May 6, 2024.

​

New Machine Setup Welcome Screen
A new overview of the machine setup steps will now show when starting the setup process.
Videos In Project Details After Finishing Cut
After completing a project cut, the project details page will now display videos about the materials just cut in the Tips & Tricks section.
Fixed field issues: This release
- Selecting certain fonts in the font selection process is causing delays in rendering on the Canvas
- The text box fails to load on the Canvas, and adding a text field in Chinese is not possible.
Last 6 weeks:
Over the last 6 weeks we've fixed 74 software defects, including the following priority field issues and reliability concerns:
- Selecting certain fonts in the font selection process is causing delays in rendering on the Canvas
- The text box fails to load on the Canvas, and adding a text field in Chinese is not possible
- Changes made to the latest project are lost upon sharing.
- Draw projects are being opened as cuts instead of drawings, resulting in a color change.
- Save a project on iOS, then open it on desktop, and notice that the changes fail to appear.
- The Canvas tab disappears and it takes longer for the Canvas tab to load.
- The saved project only shows letters on the Canvas, but double-tapping the text box reveals the entire sentences.
- After finishing cutting the mat that's off-screen, the scrollbar scrolled back to the top instead of moving to the next mat.
- My Stuff doesn't show any projects, and the collection is displayed without a name.
- Follow button is not working on profile page
- Profile links that are copied and pasted shows Blank home page.
- Forever stuck on the project details page, with both the customize and make buttons greyed out.
- Print Then Cut images appear distorted or the print preview is not accurate
- Print Then Cut images did not appear correctly on the cut screen.
- The Print Then Cut quality warning message is preventing the user from proceeding to make it.
- Clicking "View All" on recent uploads either redirects to the Inspire/Discover page or results in the inability to access the full set of uploaded images.
- The Canvas performance drastically slows down when inserting high-quality uploaded images.
- The functionality of the automatic background remover has stopped working.
- Uploaded high-resolution images, those above 300 DPI, are displaying low-resolution warnings.
- When uploading an image with a resolution exceeding 300 DPI, it undergoes downsizing, accompanied by a low-resolution warning message for each uploaded image.
- The image icon that regulates the number of images per line remains unresponsive.
- The image loses focus when resized, and after hiding contour and resizing, it becomes impossible to move the image upward in the Canvas.
- There are performance issues with Warp, as it takes more than a second to enter edit mode and experiences lag when additional characters are entered. Additionally, after completing editing and clicking outside the box, there is a delay.
- There's no prompt to confirm unsaved changes, and the previous unsaved Canvas disappears without any notification to replace or save it.
- Using the keyboard shortcut cmd + shift + left arrow key to highlight everything results in improper rendering of the highlight.
- When opening Image Sets, the images load closely together, and the Image Set name tile appears misplaced, positioned between the top and second row instead of the first row.
- When performing combine, subtract, intersect, or exclude operations and attaching them, the color or operations remains unchangeable.
- Upon launching the app, users encounter a white screen, a continuous spinner, and a missing refresh token.
- Even after power cycling and setting the load to go, the -18 machine connection error continues to persist
- When hovering over the mat control multiple times, the mat preview fails to appear.
- When toggling the mirror function, the mat selection jumps, causing the left side to scroll back to the top.
- Cannot remove images from a collection
- Completing the product setup for a second time with a different machine leads to going to the "Get Started" page without setting the correct machine type.
- The "Get Started" page on the left rail and the pointer finger suggest that there's a reason to click there.
- It's not possible to unlike projects, and an error message stating "unable to remove likes" is displayed.
- The bookmark icon fails to switch to "bookmarked" for image sets
- The private profile message fails to display, and opening a project link leads to an empty Canvas without the project
- The shared profile links are incomplete, leading to the home page instead of directing to the profile
- Card Mat - If users attempt to make or customize without selecting a finished size, they will be prompted with the error message, "Select a Finished Size to continue
- When adding a photo to the Project details, it's observed that the image is zoomed in excessively, making it impossible to zoom out sufficiently to display the entire photo.
- It is not possible to cancel a full-page Print Then Cut project from the Mat Prepare screen.
-After completing the cut with Print Then Cut and Basic Cut operations attached, the mat remains unloaded.
-Performing a second search after the initial one yields no results
-Attempting to open a project with numerous sticker groups results in the Canvas displaying a perpetual spinner, rendering the project inaccessible.
-Loading stickers with multi-layered complex projects from project details takes considerable time to customize or make, typically ranging from 5 to 7 minutes.
- The custom border feature fails to function properly with complex shapes and does not create sticker-cut interior shapes combinations as intended.
- The Offset function fails to work with intricate PNGs for creating sticker-cut interior shapes combinations, and the Apply button remains disabled, accompanied by a continuous green bar.
- When deleting a Warp within a sticker group, the border is not redrawn.
- When resizing the sticker image using the Kiss cut & Die-cut Edge option, the image vanishes from the Canvas.
- After ungrouping and regrouping the text, the font toolbar is unavailable for the group.
- Apostrophes and quotes fail to transform into their left-right variants, causing coded single and double quote marks to appear instead of the anticipated left and right variants.
- Text is positioned closer to the bottom right corner, resulting in incorrect text placement after opening a new Canvas and adding new text
- When using the delete button on the laptop to erase text, it becomes evident that the undo and redo functions are not operating correctly.
- After changing a color or moving an image, the undo feature fails to function.
- Users have the ability to delete uploaded images when using new Image Inspiration designs.
- When attempting to upload an image, a message indicating "unable to upload image" is displayed, prompting users to check their internet connection.
- The learning plan redirects to the Canvas instead of remaining on the home page.
- When the uploaded image is added to the Canvas, it displays an image load failure.

iOS

Version 5.66.0 was released on May 6, 2024.

App Improvements
Bug fixes and performance enhancements.

Read more about the update in the Apple Store.

Android

Version 5.58.1 was released on May 6, 2024.

App Improvements
Bug fixes and performance enhancements.

Read more about the update in the Google Play Store.

I am building a website with Wix and have been experimenting with the embed code and how it can be used. On my home page I have an embedded dashboard that presents the users with options to select from.
After selecting one of these options which sets the parameter value, the user would then select "GO" leading them to a new page with a new embedded dashboard, containing the details only relevant to that parameter value.
https://playfairdata.com/tableau-ui-tip-4-how-to-pass-filters-and-parameters-between-workbooks/
In this tip, we can create the go to url action in tableau and pass the parameter by adding ?my_parameter=. this works great, but only seems to be useful when using the tableau urls like https://public.tableau.com/.
It does not work for my case though as I am looking to direct the go to url to my website, with the dashboard embedded.
https://help.tableau.com/current/api/embedding_api/en-us/docs/embedding_api_parameters.html
The other option I found is to add the parameter value directly into the embed code:

In my scenario, I cannot hardcode the parameter value.
I have read a little about javascript and getting parameter value, but am unsure how to put it together. Does anyone have experience with doing this?

Here's a list of various shreddit issues I've encountered which (for the most part) make moderating more difficult.

Editing

1. There's a bug where trying to edit some posts or comments removes their content, making it impossible to edit them on this interface. Video Link + Link to a comment that is not in the video
2. There's another bug where the edit button sometimes doesn't even show up on this interface. Video Link
   1. I had reported this previously as part of another bug, but it's possible it's been overlooked.
   2. I think this also happens to some comments, but I can't find examples in my saved right now or I've waited too long and examples got archived already.
      1. Speaking of which, comments that are locked archived can't be edited on this interface. Video Link
3. Trying to edit any message automatically forces Fancy editor, which means any markdown-specific features/formatting is lost. For a technical community that heavily relies on the use of inline code and code boxes, forced fancy editor is a real inconvenience.
   1. Having been using markdown for years, the use of backticks is just ingrained in us. I've been trying to use this interface for the past couple of months, yet I regularly have to edit comments after submission because I forget to switch to markdown and use that syntax in fancy.
      1. The fact that the markdown button is hidden by default makes things even worse.
      2. After switching to markdown the editor collapses to a minimum until you type anything, which is very distracting and can make you lose your train of thought.
   2. Enabling inline code or code boxes via menu items is very inconvenient. And like above, they're hidden by default.
4. Editing code boxes is sometimes buggy too.
   1. The contents inside can get switched around. Video Link - Link2 - Link3
   2. Or something weird I just found - the edit box shows up ABOVE the contents of the comments. The edit box doesn't work. It thinks it's always empty. So this is basically worse than the "wipe" bug. Video Link - Link2 - Link3
      1. To be honest, I'm not sure if this bug is limited to comments with code boxes. That's what I was looking checking, so that's what I found.

​

Replying

1. Selecting text of a comment and pressing Reply no longer quotes it, like it does on "old" and "new". Quoting now takes a lot more effort than it used to.
2. Selecting text and dragging it to a text box is no longer possible. The text gets reselected instead of being dragged.
   1. I understand it's probably because you added the embed feature... I'll never use that feature. I have no use for it. There should be a setting to disable it. Why don't you add a Quote button next to it? That is something I'd (and likely many others) gladly use.
   2. The problem with it is that I rely heavily on dragging text, whether to do partial quotes, grab content from the Rules sidebar or even to copy the ban reason (which seems to be hidden from users) to the message to the user.
3. On mobile, the Reply button is hidden in the 3-dot menu. And it's not even the first option under it when clicked. Seems like an awful obstruction to one of the most used features on the site.
4. Replying to a locked or archived thread (as a mod) is not possible on this interface (similar to the edit section above).

​

Flairs

1. There's no flair editing on this interface. We can only choose premade flairs or switch to another interface.
2. Flairs are hidden under the mod menu and are not easily available outside like on new.reddit. This is a huge inconvenience for mods who need to change flairs sometimes multiple times per post (depending on the progress).

​

Moderating

1. Posts removed by automod don't have the "confirm removal" button inside. They look like normally removed and can only be approved. To confirm removal, I need to get back to mod queue.
2. Removed or spammed posts cannot be changed to the other like it's possible on previous interfaces.
3. Removal reasons are highly buggy. After choosing one of the reasons, "cancel" or "[X]" submits the removal reason. Here's a post where I tested this yesterday.

​

Notifications

1. Notifications don't get marked read when clicked or opened in a new tab. Sure, clicking a notification shows it being marked read, but after a page reload or opening the notifications list in another tab, it shows the notifications as unread again.
   1. I don't want to click "Mark all as read", because that's gonna be annoying to do every single time. Also, I sometimes leave notifications unread on purpose when I don't have the time to reply and want to circle back later.
2. Notifications to comments containing images don't display the comment's text. Just some "check it out at (subreddit)".
3. Notifications linking to comments in posts that were removed by us (mods) cannot be clicked because "the content is not available anymore" (or something like that). No problem in a new tab though.
4. If a user has a broken avatadead external link, they're not given a broken icon in notifications. Alt text is used instead. Due to limited width the text stretches under the previous notification too.
5. There is no longer a modmail shortcut in the toolbar, meaning no separate modmail indicator. Relying on a single notification that leads to the latest message (or sometimes doesn't even show up), whatever it is, isn't reliable enough and might lead to missing some important messages. And having to open mod tools to then navigate to modmail you might want to search or so you can contact other mods, seems like an unnecessary step.

​

Interface

1. User settings don't exist for SHreddit. It opens new reddit's, which are not honored on SH. Other than occasionally needing to open a pinned post, I don't want to sort the sub I mean moderate by "Hot". Unfortunately, all links leading to it, even leaving mod tools resets it back to "Hot".
2. Post creation doesn't exist either. Not a big deal for desktop since it launches new reddit's, but the mobile version is way too bare-bones. And selecting communities is broken there.
3. While viewing profiles (even one's own) it's nearly impossible to open comments in new tabs. You can only use the timestamp for that. That's not very convenient... If you click on one comment itself, you get redirected. Obviously, going back will not bring back you back to the same place you were before (if you were past the initially loaded comments).
4. There is no option to disable these ridiculous, often half-a-screen (or more) thumbnails that SHreddit grabs from external links. Most of the times the added images have nothing to do with the actual post content. Even if you include images yourself, if there is an external link used before the image, the random preview will get added at the end of the post. And so what that the image it grabs is tiny? It'll still force expand it to match the width of the post. Video
   1. At least it doesn't seem to show up on mobile.
5. No following posts or comments.
6. Theming is kinda limited and used the same values for both color modes so you can only choose semi-good values for either dark or light mode, not both.
   1. It doesn't seem to work for everyone. E.g. I have an account I use for testing automod, etc., and the theme only shows up for a split second there, then it disappears. No way I could find to enable it. Video
      1. Similarly, the account seem to autocollapse removed comments (doesn't happen on "new" or "old"), when the sub itself is set to not collapse them. (Shouldn't be part of theming, but I don't wanna create a separate point for that.)
7. There is no way of hiding that left side menu other than zooming about 200% or resizing your browser window. There's really not many links I might want to use there. And the collapse section buttons are totally useless since they reset on a page refresh.

​
---
​
All of these have significantly impacted my moderating such that my activity dropped from the long time 2nd (sometimes 1st) position to 4th (sometimes lower), even below that of automod.
​
There's probably more issues I've yet to find. I haven't paid mobile much attention either. But I've been postponing the submission for too long already - 80-90% of this was drafted about two months ago, I just didn't have time to finish this (gather examples, etc.)
​
---
​
I wasn't sure if I should submit this as a bug report in bugs since it involves multiple bugs (some might be related though) and other things that might not be considered as such.

:root { --n-bg: #000000; --n-icon-color: #ff0000; --n-nav-toolbar-padding: 6px; --n-sidebar-bg: var(--n-bg); --n-sidebar-color: #ff0000; --n-tab-border-radius: 0px; --n-tab-color: #FF0000; --n-tab-font-family: "VictorMono Nerd Font", sans; --n-tab-font-size: 11pt; --n-tab-font-weight: 400; --n-tab-height: 20px; --n-tab-pinned-bg: #ff0000; --n-tab-selected-bg: #ee6c4d; --n-tab-soundplaying-bg: #9c89b8; --n-urlbar-color: #98c1d9; --n-urlbar-focused-color: #ff0000; --n-urlbar-font-family: "VictorMono Nerd Font", sans; --n-urlbar-font-size: 12pt; --n-urlbar-font-weight: 700; --n-urlbar-results-color: #ff0000; --n-urlbar-results-font-family: "VictorMono Nerd Font", sans; --n-urlbar-results-font-size: 12pt; --n-urlbar-results-font-weight: 700; --n-urlbar-results-url-color: #98c1d9; /* --n-tab-selected-bg: linear-gradient(90deg, rgba(232,74,95,1) 0%, rgba(255,132,124,1) 50%, rgba(254,206,168,1) 100%); */ /* --n-urlbar-font-weight: 600; */ /* Overriden Firefox variables*/ --autocomplete-popup-background: var(--n-bg) !important; --default-arrowpanel-background: var(--n-bg) !important; --default-arrowpanel-color: #ff0000 !important; --lwt-toolbarbutton-icon-fill: var(--n-icon-color) !important; --panel-disabled-color: #ff0000; --toolbar-bgcolor: var(--n-bg) !important; --urlbar-separator-color: transparent !important; --bookmark-block-padding: 4px 6px !important; --arrowpanel-menuitem-padding: 0px 0px !important; --tab-block-margin: 0px !important; --tab-border-radius: 0px !important; --arrowpanel-border-radius: 0px !important; --arrowpanel-padding-inline: 0px !important; --arrowpanel-background: #000000 !important; --arrowpanel-color: #ff0000 !important; --arrowpanel-hover-background-color: #ff0000 !important; --arrowpanel-disabled-hover-background-color: #ff0000 !important; --arrowpaenl-disabled-color: #ff0000 !important; --arrowpanel-border-color: #ff0000 !important; --arrowpanel-icon-opacity: 0.7 !important; /* now the history sidebar color */ --lwt-sidebar-background-color: #ff0000 !important; } .tab-text { font-family: var(--n-tab-font-family); font-weight: var(--n-tab-font-weight); font-size: var(--n-tab-font-size) !important; color: var(--n-tab-color); } #tabbrowser-tabs { --tab-line-color: #ff0000 !important; } #urlbar-results { font-family: var(--n-urlbar-results-font-family); font-weight: var(--n-urlbar-results-font-weight); font-size: var(--n-urlbar-results-font-size) !important; /* color: var(--n-urlbar-results-color) !important; */ } .urlbarView-url, .search-panel-one-offs-container { /* color: var(--n-urlbar-results-url-color) !important; */ font-family: var(--n-urlbar-font-family); font-weight: var(--n-urlbar-results-font-weight); font-size: var(--n-urlbar-font-size) !important; } #urlbar-input { font-size: var(--n-urlbar-font-size) !important; /* color: var(--n-urlbar-color) !important; */ font-family: var(--n-urlbar-font-family) !important; font-weight: var(--n-urlbar-font-weight)!important; text-align: center !important; } toolbar { background-image: none !important; } #urlbar-background { opacity: .98 !important; } #navigator-toolbox, toolbaritem { border: none !important; } #urlbar-background { background-color: var(--n-bg) !important; border: none !important; } .toolbar-items { background-color: var(--n-bg) !important; } .urlbarView-row[type="bookmark"]>span { color: red !important; } .urlbarView-row[type="switchtab"]>span { color: orange !important; } #urlbar { max-width: 70% !important; margin: 0 15% !important; /* position: unset!important; */ } /* This positions the tabs under the navaigator container */ #titlebar { -moz-box-ordinal-group: 3 !important; } #sidebar-box { --sidebar-background-color: #000000 !important; } @media (-moz-mac-big-sur-theme: 1) { /* Remove Title (x)(-)(+) */ hbox.titlebar-buttonbox-container { visibility: collapse !important; } } /* Bookmarks Toolbar Auto-hide */ #navigator-toolbox:hover #PersonalToolbar, #navigator-toolbox:hover #PlacesToolbarItems > toolbarbutton > menupopup { visibility: collapse !important; } #PersonalToolbar, #PlacesToolbarItems > toolbarbutton > menupopup { visibility: collapse !important; } 

You should know the drill by now. Another month, another release, another reason to play OpenRCT2!
This month, we had opportunity to use AI to improve performance in OpenRCT2 code, if you're interested, you can read the whole article here: https://sourcegraph.com/blog/enhancing-openrct2-performance-a-journey-cody-simd
Here's what's new:

• Feature: [#11512] Coloured usernames by group on multiplayer servers.
• Feature: [#21734] Park admittance price can now be set via text input.
• Feature: [#21957] [Plugin] Expose whether the game is paused to the plugin API.
• Improved: [#21728] “Fix all rides” cheat now also works if a mechanic is already fixing the ride.
• Improved: [#21769] Expose “animation is backwards” wall property in Tile Inspector.
• Improved: [#21855] Add a separator between “Load Game” and “Save Game”, to avoid accidental overwriting.
• Change: [#21715] [Plugin] Remove access to the internal owner property. Note: ownership is still accessible.
• Change: [#21855] Cheats menu dropdown no longer requires dragging.
• Change: [#21866] Hide the FPS Counter when the top toolbawidgets have been toggled off.
• Change: [#21950] Construction and removal buttons can now be held down for repeated placement.
• Fix: [#866] Boat Hire boats get stuck entering track (original bug).
• Fix: [#10701] No reason specified when placing door over unsuitable track.
• Fix: [#18723, #21870] Attempting to demolish a flat ride in pause mode allows you to place multiple copies.
• Fix: [#19559] Custom rides with long descriptions extend into lower widgets.
• Fix: [#21696] Fullscreen window option not correctly applied on macOS.
• Fix: [#21749] Crash when loading park bigger than current limits.
• Fix: [#21787] Map generator heightmap should respect increased height limits.
• Fix: [#21829] When creating a new scenario, the default name contains formatting codes.
• Fix: [#21937] Build errors with the ORIGINAL_RATINGS flag.
• Fix: [objects#324] Cannot build Colosseum inside a turn or helix.
• Fix: [objects#325] Sloped castle walls are vertically offset by one pixel (original bug).

You can download OpenRCT2 v0.4.11 and view the whole changelog here
We would like to thank everyone who contributed with code, testing, translations, bug reports and everything else. We would also like to thank our sponsors:

• Digital Ocean, for hosting the multiplayer master server and our infrastructure
• Backtrace, for handling our automated crash reports
• JetBrains, for providing us with development software
• Github, for handling our development and issue tracker

If you're interested in contributing to OpenRCT2, feel free to join us on Discord.
You can also sponsor OpenRCT2 team members:
https://github.com/sponsors/IntelOrca
https://github.com/sponsors/janisozaur (yours truly)
https://github.com/sponsors/broxzier
https://github.com/sponsors/Gymnasiast

const int ledPin = 13; void setup() { pinMode(ledPin, OUTPUT); Serial.begin(9600); } void loop() { Serial.println(0); digitalWrite(ledPin, 0); delay(1000); Serial.println(1); digitalWrite(ledPin, 1); delay(1000); } 

{ "patcher" : { "fileversion" : 1, "appversion" : { "major" : 8, "minor" : 6, "revision" : 2, "architecture" : "x64", "modernui" : 1 } , "classnamespace" : "box", "rect" : [ 214.0, 138.0, 640.0, 629.0 ], "bglocked" : 0, "openinpresentation" : 0, "default_fontsize" : 12.0, "default_fontface" : 0, "default_fontname" : "Arial", "gridonopen" : 1, "gridsize" : [ 15.0, 15.0 ], "gridsnaponopen" : 1, "objectsnaponopen" : 1, "statusbarvisible" : 2, "toolbarvisible" : 1, "lefttoolbarpinned" : 0, "toptoolbarpinned" : 0, "righttoolbarpinned" : 0, "bottomtoolbarpinned" : 0, "toolbars_unpinned_last_save" : 0, "tallnewobj" : 0, "boxanimatetime" : 200, "enablehscroll" : 1, "enablevscroll" : 1, "devicewidth" : 0.0, "description" : "", "digest" : "", "tags" : "", "style" : "", "subpatcher_template" : "", "assistshowspatchername" : 0, "boxes" : [ { "box" : { "id" : "obj-5", "maxclass" : "message", "numinlets" : 2, "numoutlets" : 1, "outlettype" : [ "" ], "patching_rect" : [ 258.0, 157.0, 35.0, 22.0 ], "text" : "open" } } , { "box" : { "id" : "obj-7", "maxclass" : "newobj", "numinlets" : 1, "numoutlets" : 0, "patching_rect" : [ 271.0, 360.0, 55.0, 22.0 ], "text" : "print raw" } } , { "box" : { "id" : "obj-6", "maxclass" : "toggle", "numinlets" : 1, "numoutlets" : 1, "outlettype" : [ "int" ], "parameter_enable" : 0, "patching_rect" : [ 176.0, 155.0, 24.0, 24.0 ] } } , { "box" : { "id" : "obj-4", "maxclass" : "newobj", "numinlets" : 2, "numoutlets" : 1, "outlettype" : [ "bang" ], "patching_rect" : [ 167.0, 216.0, 56.0, 22.0 ], "text" : "metro 33" } } , { "box" : { "id" : "obj-3", "maxclass" : "message", "numinlets" : 2, "numoutlets" : 1, "outlettype" : [ "" ], "patching_rect" : [ 333.0, 208.0, 32.0, 22.0 ], "text" : "print" } } , { "box" : { "id" : "obj-1", "maxclass" : "newobj", "numinlets" : 1, "numoutlets" : 2, "outlettype" : [ "int", "" ], "patching_rect" : [ 204.0, 274.0, 77.0, 22.0 ], "text" : "serial d 9600" } } ], "lines" : [ { "patchline" : { "destination" : [ "obj-7", 0 ], "source" : [ "obj-1", 0 ] } } , { "patchline" : { "destination" : [ "obj-1", 0 ], "source" : [ "obj-3", 0 ] } } , { "patchline" : { "destination" : [ "obj-1", 0 ], "source" : [ "obj-4", 0 ] } } , { "patchline" : { "destination" : [ "obj-1", 0 ], "source" : [ "obj-5", 0 ] } } , { "patchline" : { "destination" : [ "obj-4", 0 ], "source" : [ "obj-6", 0 ] } } ], "dependency_cache" : [ ], "autosave" : 0 } } 

I've been using the excellent autohide_toolbox CSS from MrOtherGuy's firefox-csshacks GitHub, and for the vast majority of browsing it works perfectly. I have two issues I'd like to solve, but I'm unsure of how to do so.

1. Because the toolbox appears as soon as you hover over the bottom of where it would usually be (which is some way from the top of the screen), this covers up the very top of some websites - the main one being YouTube. Because of where the search bar is on the YT homepage, search is inaccessible as the toolbox pops in and covers it before you can reach it with the mouse. My hope to fix this if possible was to change the point at where the mouse cursor causes the toolbar to appear, so it's closer to the top of the screen (even right at the top would work).
2. The same issue affects Firefox's PDF reader and its toolbar - the main FF toolbox covers up the PDF bar. I don't use this much so it's not a huge issue, but I think if my theory for fixing point 1 above was possible, it'd fix this as well.

The current code I have is the original code on GitHub here - https://github.com/MrOtherGuy/firefox-csshacks/blob/mastechrome/autohide_toolbox.css
I tried modifying some of the numerical values to see if I could change where the mouse cursor has to be to make the toolbar appear, and try to set that point to be closer to the top of the screen - but I clearly didn't modify the right part of the code, as I couldn't get this to work.
Does anyone have any suggestions on how I could tweak this please? Thanks in advance!

Learn how to use Xcode for your first iOS app project in this step by step tutorial!
I made a new Xcode 15 video tutorial: https://youtu.be/8Xcq4yRQ0pU?si=QiiGvoBQmPh28RUr
This tutorial will show you where to get Xcode, how to create your first iOS project, what all the files mean, how to use Xcode to code in Swift and build user interfaces and more!
Here are the topics that are covered in the video:
00:00 1. Intro
00:17 2. Where to Download Xcode
02:20 3. How to Start a New Xcode Project
07:36 4. The Main Areas of Xcode
09:40 5. Xcode Project Files and Navigator Area Basics
18:07 6. Xcode Editor Area Basics
29:03 7. Xcode Inspector Basics
34:02 8. Xcode Toolbar Basics
38:19 9. Using The iOS Simulator
40:48 10. Installing your App on a Physical Device
45:00 11. Outro
Did I miss anything in the video? Let me know and I'll try my best to record a follow up!
​

Before submitting a comment about an issue, the #1 thing any user should do when they first experience issues with a new update is to follow these troubleshooting steps.

If issues still persist despite the efforts made in this thread, report the issue to cricut.

⭐⭐Print then Cut users⭐⭐
Calibrate your machine right after an update as your calibration settings will not carry over into the latest update. Follow the advice of the calibration guide. Then do a test print then cut of your project using plain printer paper.
If for some reason after calibration your cuts are still inaccurate, clear cache (the troubleshooting guide above this) and try calibration again.

If you are experiencing issues despite clearing cache, please give some background information:

• Cricut machine (Joy, Joy Xtra, Explore Air 2, Explore air 3, Maker, Maker 3, etc.).
• Device (Windows 10, Window 11, Mac, iPhone, iPad, Android).
• Type of project you were attempting to do. (Basic cut, print then cut, drawing, foiling, scoring, etc.)
• Were you successful in doing this project in the past? Or is this a new project?

What has changed (Desktop v8.28.55)? Update on April 29nd, 2024.

Convert to Layers
This exclusive feature for Cricut Access subscribers lets you instantly convert an uploaded multicolored image into separate layers! Once you upload an image, select Multiple Layers, then select how many layers (separated by color) you want to work with on the Canvas. Anyone can preview the results of the Convert to Layers feature. To add it to your Canvas, you'll need a Cricut Access subscription.
USB Connection Screen Refresh
The USB page of Product Setup was updated with more detailed instructions.
Cricut Destination Pages Show in Search
Now Cricut destination pages will appear as tiles under Collections in search results.
Fixed field issues: This release
- Copying the project link and pasting it on Facebook doesn’t work and it fails to open the project
- Changing a material does not remove the star wheel warning message on the Set-Load-Go screen
- Unable to change fonts, the Canvas fails to render font changes after multiple attempts
- Some system fonts are not displaying font previews
- When editing a duplicate or copy-pasted non-basic cut text, the operation type defaults to basic cut
- Save the Pattern results in an error message stating, “Pattern fill not saved.”
- When dragging or rotating, the path data remains unchanged.
- User is able to skip the consent prompt and keep using Design space.
Last 6 weeks:
Over the last 6 weeks we've fixed 74 software defects, including the following priority field issues and reliability concerns:
- Changes made to the latest project are lost upon sharing.
- Draw projects are being opened as cuts instead of drawings, resulting in a color change.
- Save a project on iOS, then open it on desktop, and notice that the changes fail to appear.
- The Canvas tab disappears and it takes longer for the Canvas tab to load.
- The saved project only shows letters on the Canvas, but double-tapping the text box reveals the entire sentences.
- After finishing cutting the mat that's off-screen, the scrollbar scrolled back to the top instead of moving to the next mat.
- My Stuff doesn't show any projects, and the collection is displayed without a name.
- Follow button is not working on profile page
- Profile links that are copied and pasted shows Blank home page.
- Forever stuck on the project details page, with both the customize and make buttons greyed out.
- Print Then Cut images appear distorted or the print preview is not accurate
- Print Then Cut images did not appear correctly on the cut screen.
- The Print Then Cut quality warning message is preventing the user from proceeding to make it.
- Clicking "View All" on recent uploads either redirects to the Inspire/Discover page or results in the inability to access the full set of uploaded images.
- The Canvas performance drastically slows down when inserting high-quality uploaded images.
- The functionality of the automatic background remover has stopped working.
- Uploaded high-resolution images, those above 300 DPI, are displaying low-resolution warnings.
- When uploading an image with a resolution exceeding 300 DPI, it undergoes downsizing, accompanied by a low-resolution warning message for each uploaded image.
- The image icon that regulates the number of images per line remains unresponsive.
- The image loses focus when resized, and after hiding contour and resizing, it becomes impossible to move the image upward in the Canvas.
- There are performance issues with Warp, as it takes more than a second to enter edit mode and experiences lag when additional characters are entered. Additionally, after completing editing and clicking outside the box, there is a delay.
- There's no prompt to confirm unsaved changes, and the previous unsaved Canvas disappears without any notification to replace or save it.
- Using the keyboard shortcut cmd + shift + left arrow key to highlight everything results in improper rendering of the highlight.
- When opening Image Sets, the images load closely together, and the Image Set name tile appears misplaced, positioned between the top and second row instead of the first row.
- When performing combine, subtract, intersect, or exclude operations and attaching them, the color or operations remains unchangeable.
- Upon launching the app, users encounter a white screen, a continuous spinner, and a missing refresh token.
- Even after power cycling and setting the load to go, the -18 machine connection error continues to persist
- When hovering over the mat control multiple times, the mat preview fails to appear.
- When toggling the mirror function, the mat selection jumps, causing the left side to scroll back to the top.
- Cannot remove images from a collection
- Completing the product setup for a second time with a different machine leads to going to the "Get Started" page without setting the correct machine type.
- The "Get Started" page on the left rail and the pointer finger suggest that there's a reason to click there.
- It's not possible to unlike projects, and an error message stating "unable to remove likes" is displayed.
- The bookmark icon fails to switch to "bookmarked" for image sets
- The private profile message fails to display, and opening a project link leads to an empty Canvas without the project
- The shared profile links are incomplete, leading to the home page instead of directing to the profile
- Card Mat - If users attempt to make or customize without selecting a finished size, they will be prompted with the error message, "Select a Finished Size to continue
- When adding a photo to the Project details, it's observed that the image is zoomed in excessively, making it impossible to zoom out sufficiently to display the entire photo.
- It is not possible to cancel a full-page Print Then Cut project from the Mat Prepare screen.
-After completing the cut with Print Then Cut and Basic Cut operations attached, the mat remains unloaded.
-Performing a second search after the initial one yields no results
-Attempting to open a project with numerous sticker groups results in the Canvas displaying a perpetual spinner, rendering the project inaccessible.
-Loading stickers with multi-layered complex projects from project details takes considerable time to customize or make, typically ranging from 5 to 7 minutes.
- The custom border feature fails to function properly with complex shapes and does not create sticker-cut interior shapes combinations as intended.
- The Offset function fails to work with intricate PNGs for creating sticker-cut interior shapes combinations, and the Apply button remains disabled, accompanied by a continuous green bar.
- When deleting a Warp within a sticker group, the border is not redrawn.
- When resizing the sticker image using the Kiss cut & Die-cut Edge option, the image vanishes from the Canvas.
- After ungrouping and regrouping the text, the font toolbar is unavailable for the group.
- Apostrophes and quotes fail to transform into their left-right variants, causing coded single and double quote marks to appear instead of the anticipated left and right variants.
- Text is positioned closer to the bottom right corner, resulting in incorrect text placement after opening a new Canvas and adding new text
- When using the delete button on the laptop to erase text, it becomes evident that the undo and redo functions are not operating correctly.
- After changing a color or moving an image, the undo feature fails to function.
- Users have the ability to delete uploaded images when using new Image Inspiration designs.
- When attempting to upload an image, a message indicating "unable to upload image" is displayed, prompting users to check their internet connection.
- The learning plan redirects to the Canvas instead of remaining on the home page.
- When the uploaded image is added to the Canvas, it displays an image load failure.

Android

Version 5.57.0 was released on April 29nd, 2024.

App Improvements
Bug fixes and performance enhancements.

Read more about the update in the Google Play Store.

Hello everyone
For my master's thesis i'm working with qualitative data, so I'm using Nvivo to code my data (thematical analysis). But, I got a problem with Nvivo and I don't know how to fix it... I can't code anymore on Nvivo, everytime i try to do it it just won't work and then there comes an error on my screen:
"Error Message: Cannot nest DataTransactions
Stack Trace: at QSR.NVivo.Common.Data.DatabaseSession.b(DataTransactionType A_0) at QSR.NVivo.Common.Business.Services.TransactionService.BeginDataTransaction(DataTransactionType aType) at QSR.NVivo.Common.Business.Services.TransactionService.Save(Boolean anProcessEvents) at QSR.NVivo.Common.Business.Services.TransactionService.Save() at QSR.NVivo.Client.Presentation.Forms.NVivoApplication.a(Boolean A_0, Boolean A_1, TaskCompletionSource`1 A_2) at QSR.NVivo.Client.Presentation.Forms.NVivoApplication.ae() at QSR.NVivo.Client.Presentation.Forms.NVivoApplication.aw() at QSR.NVivo.Client.Presentation.Forms.NVivoApplication.a(Control A_0, ToolClickEventArgs A_1) at QSR.NVivo.Client.Presentation.Forms.NVivoApplication.a(Object A_0, ToolClickEventArgs A_1) at Infragistics.Win.UltraWinToolbars.UltraToolbarsManager.OnToolClick(ToolClickEventArgs e) at Infragistics.Win.UltraWinToolbars.UltraToolbarsManager.FireEvent(ToolbarEventIds id, EventArgs e) at Infragistics.Win.UltraWinToolbars.PopupMenuItemUIElement.DoClickProcessing(MouseEventArgs e) at Infragistics.Win.UltraWinToolbars.PopupMenuItemUIElement.OnMouseUp(MouseEventArgs e) at Infragistics.Win.TextUIElementBase.OnMouseUp(MouseEventArgs e) at Infragistics.Win.ControlUIElementBase.ProcessMouseUpHelper(Object sender, MouseEventArgs e) at Infragistics.Win.ControlUIElementBase.ProcessMouseUp(Object sender, MouseEventArgs e) at Infragistics.Win.Utilities.ProcessEvent(Control control, ProcessEvent eventToProcess, EventArgs e) at Infragistics.Win.UltraWinToolbars.UltraToolbarsDockArea.OnMouseUp(MouseEventArgs e) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) "
Does anyone know what this means and what i could do? I'm really clueless, i just hope i dont have to start all over again?
Thank you in advance!

I'm following the instructions from the book for Lesson 1, and when I copy and pase the data from the 'Create' file, then hit the 'Execute' button, the action output always returns with an error.
Here are the instructions from the PDF -

1. You can now type SQL [I did] in the editor window, but you must first make sure that your newly created schema is selected. You’ll know it is selected if the name tysql is shown in the Information panel below the Navigator panel.
2. To create the database tables, copy and paste contents of the Create file into the SQL [I did] editor window (you may see warnings about keys, you can ignore these).
3. Click the Execute Query button (yellow lightning bolt) to execute the script.
4. Now that you have tables, we need to populate them with data. Delete the text from the SQL editorwindow. Nope, no tables, only errors for me.

Running on a Mac, but everything up to this point didn't seem to give me any issues. Any ideas of help would be greately appreciated.
Reddit didn't like my image I included, so here is a link to it.

I wrote a desktop dashboard app that is well liked by my office, but it is a bear to maintain and distribute with pyinstaller false positives. I here to make parts, not distribute code so I am looking a good path to move to the web.
Here is what it currently does:
* Talks to Zoho Creator, PaperlessParts, Autodesk, and a few other APIs to trigger operations. * Uses jinja2 to make editable/printable work orders that can be saved as html. * Makes and finds OneDrive folders for work order file storage * Has about 12 other buttons that just trigger stuff over apis. * Jinja2 produced directory of our vendors, and customers
The current layout: * A toolbar up top * A QWebEngineView where I push the jinja
Essentially it's a dashboard made with pyqt6, qwebengine, and qsettings. I've reasonably separated the UI and the rest of the app when I switched from tkinter last year. Having never built a web app, I didn't design it for multi user.
My requirements are simple: * I don't want to fuss a ton with login and auth. I just want it to sorta work if possible * A UI template would be nice. So if your suggestion is flask or Django, I'd appreciate templates to avoid fussing here. * easy deployment
Thanks for the help everyone.

Hi everyone 👋 I want to introduce my open source project Yoopta-Editor and I want to ask you to give me some feedback. It’s packed with features that let you build editor as powerful and user-friendly as Notion, Craft, Coda, Medium etc. Feel free to use, it's under MIT License!
Check features and examples below. Examples - https://yoopta-editor.vercel.app
Features:

• Easy setup
• Default list of powerful plugins
• Many typical solved problems in UX behavior.
• Media plugins on steroids with optimization and lazy loadings
• Code plugin on steroids with themes and languages
• Each plugin can be easily customized and extensible
• Drag and drop, nested dnd is supported also
• Selection box for manipulating with multiple blocks at once
• You can create your own plugin
• A list of useful tools (ActionMenu, Toolbar etc.) for the convenience of working with the editor
• Automatic lazy loading for media components (eg. embeds)
• Large documents
• Mobile friendly
• Indent and outdent for every plugin by tabs and shift+tabs
• Editor instance to programmatically control your content
• Editor events for saving to DB in real-time
• Exports in markdown, plain text, html - [in progress. Currently available only HTML exports]
• Shortcuts, hotkeys. And customization for this!
• Super AI tools not for HYPE, but for real useful work with editor content - [in progress]