New edition sadlier

I can't seem to find any discussion why this happens. I have shot about hour long gig with 3 cameras. 2 of them are stationary running throughout the gig and one was shot handheld in few minute clips. There is around 35 of these short clips + 2 long ones.
Once brought to Resolve media pool I created proxies and in metadata I gave proper "Camera#" coresponding with the cameras. I highlighted them all and from the context menu clicked "Create new multicam clip using highlighted clips". From there sync with sound and detect clips with same camera by "Camera#" and hit Create. Everything goes well without any errors or warnings. Once I right click multicam clip and choose "Open in timeline" there is only 11 of those short clips aligned on top of those 2 long ones.
Why most of the short clips are missing from the multicap clip? Shouldn't it give some error if it is not able to put them on timeline?
Another weird thing is that when I try to make clips line up by making a bin and then syncing them within that bin to create sync bin there is only few of those small clips in the end of "camera 3". This seems to be issue with the "Camera#" property. Once I remove "Camera#" They are synced correctly but then all of the clips are spread on its own camera which makes at least for me editing bit difficult. In conclusion sync via sound is able to find correct places for the clips but there is something else wrong with the multicam. And I assume that sync bin should also sync correctly if there is "Camera#" assigned.

i changed my logo but and also saved it but when it boots up it shows nothing any idea why (btw i just edited the logo not created a new one) (keep in mind i am a beginner so pls dont use fancy woords ty!

I was playing last night for a few hours and CTD after going to the scavengers platform. Today when I loaded my save (made before last nights CTD) I can no longer fast travel, Save, or load interior cells without CTD. My load order follows:
FalloutNV.esm
DeadMoney.esm
HonestHearts.esm
OldWorldBlues.esm
LonesomeRoad.esm
GunRunnersArsenal.esm
Fallout3.esm
Anchorage.esm
ThePitt.esm
BrokenSteel.esm
PointLookout.esm
Zeta.esm
CaravanPack.esm
ClassicPack.esm
MercenaryPack.esm
TribalPack.esm
TaleOfTwoWastelands.esm
YUPTTW.esm
FO3_Optimization.esm
Tale of Bi Wastelands.esm
Functional Post Game Ending.esm
Functional Post Game Ending - TTW Patch.esm
TLD_Travelers.esm
A Trail of Crumbs.esm
Regulators.esm
AWorldOfPainFO3.esm
Alton, IL.esm
AnotherInteriorMod.esm
BelowtheDepthTTW332.esp
CFEE.esp
CFEE - TTW.esp
ClaimtheMojave.esm
DCXpansion - Stanton Park.esm
Functional Post Game Ending - YUP Patch.esm
MBFNPCs.esp
MCmaster.esm
MCmod.esp
NewCalifornia.esm
NukaExpansionUltTTW.esm
Point Lookout Reborn.esm
Rebuild the Capital.esm
RtC-AnotherInterior.esm
RtC-Hotpatch.esm
SaltLakeStories.esm
Simple Open Freeside.esm
Simple Open Strip.esm
SomeguySeries.esm
Sortomatic.esm
SpringvaleGarage.esm
Tales from the Burning Sands.esm
The Frontier.esm
TTW Halls of Today.esp
TTWInteriors_Core.esm
TTWInteriorsProject_Combo.esm
UncannyValleyResearch.esp
UWHNV-Core.esm
WashingtonsMalevolence.esm
ZionTrail.esm
Haunted Casino.esm
AutumnLeaves.esp
AutumnLeavesTTWPatch.esp
BeamMeUp.esp
Casino Crowds.esp
KingOfTheRing.esp
TTWTransportalponderEx.esp
ClaimtheMojaveFPGE.esp
The Mod Configuration Menu.esp
ClaimtheMojaveFrontier.esp
ClaimtheMojaveRebuildtheCapital.esp
ClaimtheMojaveTLD.esp
Classic Fallout Weapons Remastered v1.2.esp
Fallout The Frontier Unofficial Uncut Patch.esp
FreesideOpen-Functional Post Game Ending.esp
FreesideOpen-NVInteriors_ComboEdition.esp
Frontier_-_Enable_Slaves_Harbour.esp
Frontier_TTW_Patch.esp
JokerineTTWBauPetSupplies.esp
Lucky38RevolutionsTTW.esp
MCanchorage.esp
MCpark.esp
MCPitt.esp
MCPL.esp
More Perks v3.esp
NewCalifornia Courier Stash Control.esp
NewCalifornia DLC Control.esp
NewVegasBounties.esp
FreesideOpen-NewVegasBounties.esp
NewVegasBountiesII.esp
FreesideOpen-NewVegasBountiesII.esp
NewVegasBountiesIII.esp
FreesideOpen-NewVegasBountiesIII.esp
Project Reality Footsteps.esp
RagsToRiches.esp
FreesideOpen-RagsToRiches.esp
RbtcMcmodPatch.esp
Rebuild the Capital - No Pony Express Boxes.esp
rotfacetoriches.esp
RtC-TrailofCrumbs.esp
Russell.esp
FreesideOpen-Russell.esp
Simple Open Freeside-Functional Post Game Ending-rotfacetoriches.esp
SomeguySeries Revamped.esp
Someguy Series Revamped perk fixes.esp
sosik.esp
StarBright.esp
TFHotfixes.esp
TheBetterAngels.esp
TheInheritance.esp
FreesideOpen-TheInheritance.esp
CFEE - Someguy Series.esp
TTW Interiors Opt.esp
TTW Music Addition.esp
TTW-vTZv_CombatShotgun.esp
TTWCollectiblesMerged.esp
UWHNV-Addon-DLC.esp
UWHNV-Addon-FollowerHome.esp
UWHNV-Addon-GRA.esp
UwatGRAFix.esp
UWHNV-Addon-Time for Bed NV.esp
ZionTrail-NV.esp

Hi There, DITs! Post calling here. I am hoping someone will be able to help me here as I really want to use this tool on set, but I keep banging my head up against the wall with this.
The Scenario: We are shooting a multicam TV show with anywhere from 10 to 15 cameras. It's a Mix of Sony Cams (FX6, FX9, FX7) and Go Pros and DSLRS. We are shooting 1080p, 29,97 and it is a mix of DF and NDF. (DF for the main cameras, NDF for the h264 cameras)
The show is going to be edited on Avid Media Composer
What I would like to do: Use Silverstack to offload cards, and create Proxies on set as it can transcode faster and generally without glitches as opposed to Avid. I've done this before with Davinci Resolve for proxy creation, but I would like to deal with just one app for this
The issues: Everytime I transcode anything in Silverstack Lab (DNxHR, OP1a-Atom), a tape name/reel name always gets added to the file no matter what options I choose. Tape name is a legacy metadata from Avid that is super problematic for many reasons I won't get into. But it makes the edit media very inflexible, and once it gets added, you can't get rid of it. It also forces you to add metadata to the raw one file at a time to be able to relink. We've been using Source File name for this for years now.
The other issue is that I can't get the Drop-Frame time code to transfer over. All media comes in as NDF. But the .ALE and AAFs come in as DF. So nothing will merge when I bring it in. This is somewhat normal for Avid. All transcoded media lives in the media drives as NDF. What makes it DF is the metadata if you can get it to merge, which at the moment I cannot. The tape name/reel name issue I describe above makes this worse, because I can always modify the clips to be DF, but that creates a whole new set of tape names, which I would have to assign to the Raw, one file at a time if I want to uprez.
I am sure this workflow is very unlike anything you guys deal with since this is USA legacy cable TV we are dealing with here.
If only I could get Silvertack to stop adding Tape Names (AKA Reelnames) to my media, I could deal with the rest of the issues and massage the metadata myself. DaVinci Resolve was able to let me switch off the tape name/reel name on export. How can I do the same with Silverstack?
If you've made it this far, I thank you!
PS: I am using the trial do run these tests.

Welcome to The Garden, a (Bedrock Edition) laid back experience thats been running for 2 years now. Our server is powered by the Forsaken Odyssey expansion made by Nico the Kid. No modding required, just join and download the resource packs.
I pride myself on keeping this world running until i absolutely cant. The only reason the world will be reset is if a new minecraft update requires it, and i'll do my best to work around that as well. Blocks outside of 15,000 in any direction are reset every once in a while to add new land to explore.
🌱 No Obligations: I believe in creating an environment where you can play Minecraft on your terms. There are no playtime obligations, and we don't have any paid packages or donation systems. The server's expenses are entirely covered by me, ensuring that it's a place for pure enjoyment.
🌍 Fresh and Unique: The Forsaken Odyssey expansion introduces a variety of new content while maintaining game balance. Expect new mobs, blocks, biomes, and items, along with carefully selected personal addons that keep the server fresh and unique. You dont have to download anything on your own to join. Just download the resource packs when you log in.
🌟 Play Your Way: There's no "right way" to participate here. Whether you prefer a solitary experience or want to create or join a community, you're welcome. We respect your choice and value your presence. As long as you are respectfull of others, you'll have a great time here.
⚔️ Survival Challenges: The server is set to Hard difficulty with enabled coordinates. PvP is allowed for duels or consensual battles, and players can form factions and engage in PvP when agreed upon. Check our Discord for more details on rules. Modded creatures get added and removed occasionally to keep things interesting, and the landscape is dotted with abandoned buildings and dungeons to explore.
🏡 Convenience Features: We offer features like Homes, Warps, and TPA for easy navigation and a smoother gameplay experience. Economy features make catching up to long term players easier, and allow you to focus on building what you want.
Joining is easy, simply click this link: https://discord.gg/TvyAb9ga7g
After reading the rules, click the verify button in our Discord server. No captchas, external links, or additional authorizations are required. The IP and port will be readily available in the Discord. We're excited to welcome new players to The Garden, and we hope you have a wonderful and stress-free time here.

[WTS] Selling off some more gear that I am not using and it needs a new home. I have a few sales here on ULgeartrade and geartrade, and I had many before the new rating system kicked in. Prices include shipping from 98501 USA to CONUS only, I accept PayPal G&S only, add that 3% pretty please.

• Two Thermarest Neoair XLites, one regular LxW, one short 48". They are both the old style valve, and they are both in excellent condition, nor leaks or repairs. I used the big pad on 10 hikes? 20? I don't really recall, and the short pad was used on ONE HIKE on the WA coast, and I always used a pump sack or the Thermarest electric pump to inflate them. The regular size pad has some stick-on attachments for a Thermarest quilt I used to have but sold. Buyer can use them or remove them, but I will leave them on. The regular pad comes with a stuff sack, the short does not. The regular 20x72 weighs 13.4oz in the sack. The regular size pad has been I am selling these because I have another regular Xlite (plus an XTherm and an Uberlite) and I definitely don't need two Xlites, and my niece outgrew the short pad in the space of 3 years. What a jerk. $100 each. Photos and verification HERE.
• Custom Zimmerbuilt Quickstep, 12.9oz. I had this pack made 3-4 years for an ex-GF, she's gone but the pack remains. She was fairly petite, around 5'4" I think, so the measurement from the top seam where the padded shoulder straps are sewn in to the bottom of the pack is 13", so best for a smaller person, or someone that likes their pad to sit high. I don't remember what kind of DCF this is, and I no longer have the order email, but it feels like the thicker kind, but I don't have a lot of DCF experience outside of some stuff sacks, so... This pack was used 3 times, with the longest hike being32 miles/3 days, and it has zero signs of wear, every part of it is pristine. You can check out the photos of the pack, all the fancy bells and whistles, and the verification HERE. So here are the custom bits-

-It has the adjustable back panel bungie, and there's an included 13"x9.5" folding sit pad that tucks in there for support and breathability, and you can even use it for sitting on! And it weighs just a scant 0.8oz.
-it has the sternum strap with a built-in whistle, and a haul loop. But wait, there's more!
-it also comes with padded shoulder straps, with daisy chains! Fancy!
-it has hipbelt loops, but alas, there is no hipbelt included. Bummer. But---
-above the shoulder straps, built-in to the rolltop is a waterproof zip pocket that is 4.5"x9". This is a good pocket for stakes, your spork, eyeglasses case, whatever. The rolltop still functions perfectly when you got your stuffs in here. And if you like pockets, check this next feature out...
-above the mesh pocket on the front of the pack is another waterproof zip pocket that's 6.5"x9". The ex-girl stuck her FAK, poop kit and I think a power bank in here. Be creative, you can stick anything you want in this pocket, I won't judge. And now...
-the bottom pocket! I went crazy on this one...it has openings on BOTH ends. That's right! Left-handed, right-handed, ambidextrous? This pack will work for you. Totes bonkers.
this pack also has loops up top for a Y-strap or Y-bungie, I honestly don't remember what used to be there, but whatever it was, it isn't there anymore. So the buyer gets to pick their own adventure up top. You get to make a custom pack even more custom! Crazy. So there you have it, a weird little superlight 28L pack (+8L in the pockets). I remember paying around $240 for this before shipping, I'm asking for $160 shipped. Thanks for looking, and happy trails.
Edit because I forgot to include the sleeping pad condition and usage.

I will continue to update this post as reviews come in.
Rotten Tomatoes: N/A
Critics Consensus: N/A

	Score	Number of Reviews	Average Rating
All Critics	%	0	/10
Top Critics	%	0	/10

Metacritic: N/A (0 Reviews)
Sample Reviews:
​
SYNOPSIS:
Megalopolis is a Roman Epic fable set in an imagined Modern America. The City of New Rome must change, causing conflict between Cesar Catilina, a genius artist who seeks to leap into a utopian, idealistic future, and his opposition, Mayor Franklyn Cicero, who remains committed to a regressive status quo, perpetuating greed, special interests, and partisan warfare. Torn between them is socialite Julia Cicero, the mayor’s daughter, whose love for Cesar has divided her loyalties, forcing her to discover what she truly believes humanity deserves.
CAST:

• Adam Driver as Cesar Catilina
• Giancarlo Esposito as Mayor Franklyn Cicero
• Nathalie Emmanuel as Julia Cicero
• Aubrey Plaza as Wow Platinum
• Shia LaBeouf as Clodio Pulcher
• Jon Voight as Hamilton Crassus III
• Jason Schwartzman as Jason Zanderz
• Talia Shire as Constance Crassus Catilina
• Grace VanderWaal as Vesta Sweetwater
• Laurence Fishburne as Fundi Romaine
• Kathryn Hunter as Teresa Cicero
• Dustin Hoffman as Nush "The Fixer" Berman

DIRECTED BY: Francis Ford Coppola
WRITTEN BY: Francis Ford Coppola
PRODUCED BY: Francis Ford Coppola, Michael Bederman, Barry Hirsch
EXECUTIVE PRODUCERS: Darren M. Demetre. Anahid Nazarian, Barrie M. Osborne, Fred Roos
DIRECTOR OF PHOTOGRAPHY: Mihai Mălaimare Jr.
PRODUCTION DESIGNER: Beth Mickle, Bradley Rubin
EDITED BY: Cam McLauchlin, Glen Scantlebury
MUSIC BY: Osvaldo Golijov
COSTUME DESIGNER: Milena Canonero
CASTING BY: Courtney Bright, Nicole Daniels
RUNTIME: 138 Minutes
RELEASE DATE: N/A

Hi, I've been trying to get port forwarding to work and can't quite get it going. Hoping someone here can help me figure out where I'm going wrong. Feels like it's almost there.
I recently set my modem to transparent bridge mode and have my Mikrotik CRS328 handling the PPPoE connection through a 201 tagged VLAN. This VLAN is called "centurylink-internet" and it is pointed to my "ether1-WAN" interface which connects to my modem. I have a PPPoE client that also points to "ether1-WAN". Internet works great.
I'm running a service in a machine within my network at IP 192.168.30.4 with ports 80 and 443. I need to access this machine from outside my network. I have been messing with a bevy of IP filter and NAT rules, but have been unable to get it to work. The NAT rules are a bit of a mess I think, since I've been trying stuff here and there. The last two NAT rules are the latest attempt. I may definitely be messing up the Filter rules here too, since I'm starting from scratch and I'm pretty new to firewalls. Any help appreciated!

IP > Services - www port 80 enabled - www-ssl port 443 enabled IP > Firewall > Filters - chain=forward action=passthrough - chain=input action=accept connection-state=established,related - chain=input action=drop connection-state=invalid - chain=input action=accept in-interface-list=LAN - chain=input action=accept protocol=icmp - chain=input action=accept src-address-list=Devices log=no log-prefix="" - chain=input action=drop log=no log-prefix="" - chain=forward action=accept protocol=tcp dst-address-list=Services in-interface=centurylink-internet dst-port=80 log=no log-prefix="" - chain=forward action=accept protocol=tcp dst-address-list=Services in-interface=centurylink-internet dst-port=443 log=no log-prefix="" - chain=forward action=accept connection-state=established,related log=no log-prefix="" - chain=forward action=drop connection-state=invalid log=no log-prefix="" - chain=forward action=accept connection-nat-state=dstnat log=no log-prefix="" - chain=forward action=drop connection-state=new in-interface=centurylink-internet log=no log-prefix="" - chain=forward action=accept src-address-list=Devices log=no log-prefix="" - chain=forward action=accept src-address-list=Services log=no log-prefix="" - chain=forward action=drop IP > Firewall > NAT - chain=srcnat action=masquerade out-interface=pppoe-out1 log=no log-prefix="" - chain=srcnat action=masquerade src-address=[192.168.30.0/24](https://192.168.30.0/24) out-interface=ether1-WAN - chain=srcnat action=masquerade src-address=[192.168.20.0/24](https://192.168.20.0/24) dst-address=[192.168.0.0/24](https://192.168.0.0/24) out-interface=ether1-WAN - chain=dstnat action=dst-nat to-addresses=[192.168.30.4](https://192.168.30.4) to-ports=443 protocol=tcp in-interface=centurylink-internet dst-port=443 log=no log-prefix="" - chain=dstnat action=dst-nat to-addresses=[192.168.30.4](https://192.168.30.4) to-ports=80 protocol=tcp in-interface=centurylink-internet dst-port=80 log=no log-prefix="" 

Edit: Forgot to mention that I'm using Cloudflare to send traffic to my domain over to my public IP. If I don't drop the forward new connections via the centurylink-internet interface, hitting my IP address externally shows me RouterOS, not my service.

I just finished installing windows on my new build, everything seemed fine. Did all the updates for drivers and other windows stuff. Rebooted just fine. Still reboots fine but a cold boot brings up BIOS and then I have to exit without saving and then windows boots like expected. BIOS is up to date and everything else is working as expected.
Mobo is a MSI MAG x670e Tomahawk and the M.2 is a WD Black SN850x Any help would be most appreciated.
EDIT: The M.2 is in slot one but BIOS says all slots are empty

Tldr this can kill moass, we have to comment now!
SR-OCC-2024-007
Need more attention on the rules proposed by the NSCC/OCC to the SEC
We need more attention and DD posted about the new rules the NSCC and OCC (The options Clearing Corporation) have been proposing to the SEC last couple months. Mainly because they have been pulling alot of bullshit like redacting whole pages from the public’s view of these rules couple months ago to completely removing the ability to view/posting comments on the SEC’s website last week so you know they are on some BS.

• The NSCC is the National Security Clearing Corporation that is a subsidiary of the DTCC that provides central clearing, risk management, info, and settlement services to the market.

-The OCC is the Options Clearing Corporation that delivers clearing and settlement services for options, futures and securities lending transactions to exchanges and trading platforms.
———————————————————————
The main rules I’m referring to are as Follow:

• SR-OCC-2024-007
  
• SR-OCC-2024-001
  
• SR-OCC-2024-002
  
• SR-OCC-2024-003
  
• SR-OCC-2024-004
  

———————————————————————
The main concerns with these rules and things that need to be looked in to are as follow-
*Lack of transparency to the public/retail investors vs Market Makers, hedge funds and other institutions
*A major decrease of margin requirements for institutions, rule 007 even says something about OCC being able to decrease the required collateral for a party in one scenario from $300 Billion to $6 Billion if they used the new proposed rule of using NSCC for settlements instead of outside parties (brokers), stinks like some BS kicking the can pile of shit to me covered in words like “more efficient markets.” Look at page 5 of rule “007” for reference.
*Bail outs
*Avoiding Margin Calls if the OCC thinks it was a “mechanical/systematical issue or error.”
*(Rule NSCC-2023-007) Without NSCC, there's no netting for OCC & in January 2022, the largest gross broker-to-broker settlement amount in the case of a larger Clearing Member default would have resulted in liquidity needs of approximately $384,635,833,942 from OCC. ($384 BILLION) -Anybody know who almost defaulted? I don’t remember anything happening in Jan 2022 except crypto going down. Maybe they “accidentally” put 2022 instead of 2021?
———————————————————————
This discussion is not covering the T+1 change that is also proposed in the rules, which I personally think would be good for both retail and the big players. But feel free to comment on that as well if you wish.

• I may make edits as I get updates from comments. They will be linked under this section:

———————————————————————
Links to proposed rules-
(007) https://www.sec.gov/files/rules/sro/occ/2024/34-99735_0.pdf
(001) https://public-inspection.federalregister.gov/2024-01386.pdf
(002) https://www.theocc.com/getmedia/88a24549-3a86-458f-9231-d0b072608c63/SR-OCC-2024-002.pdf
(003) https://www.theocc.com/getmedia/99490271-394d-4bab-ba33-d27f33cdef6e/sr_occ_2024_003.pdf
(004) https://www.theocc.com/getmedia/11b35eef-2020-4dfc-af8f-25ae41acdc91/sr-occ-2024-004.pdf
Copy pasta from, gme https://www.reddit.com/Superstonk/s/fcevpRZjVS

Hey all got a single binder to show off today. Ranges from SM Era to Modern ex cards so hope there's something ya'll will like. All cards will have a price on them already, and will be penny sleeved w/ toploader when sold.
Prices are based off of TCGPlayer Market Price
PWE will be $1 BWMT will be $5
Binder:
The Binder
Wants:
Spreadsheet of wants
TCGCollector Visual Want List

I haven’t been back on fallout 4 in years and I’ve heard recent updates have broken major mods like the script extender and unofficial patch which I intend to use.
Are the majority of mods already updated that you guys use? Or should I wait a couple more months and put more time into New Vegas?
Edit: I’m on PC

I understand that Tello has recently doubled all the data quota in all it's plans but set a hard limit to cut it off once you exhaust the data.
Few months back, I had gone out alone to my doctor's appointment. While returning home from the clinic, I took a stop at a local grocery store to buy some groceries. When I was done and putting the home location on Google maps, I noticed I cannot connect to the Internet anymore and realized that my data got exhausted. I got stuck there for like good 1 hour. The grocery store or any nearby store didn't have any WiFi. I had to literally beg from strangers to share their mobile data temporarily for me to recharge my data plan. One of them did and I was able to get home. However, this was a frustrating experience. Yes, I could have called someone to recharge the plan but that would have meant I would have to share my account credentials to them, which I wanted to avoid.
My feedback to Tello: once the data (or any monthly plan) is exhausted, please continue to allow normal and unlimited internet connection to only Tello website and Tello app from the phone with normal internet speed, so that if we users want to recharge it with additional data (or a new plan) they can do so easily from any where.
Edit: I later got to know you could recharge by SMS too. But I didn't find it out until later when I got home. There was no way to get that info without mobile data while I was in the grocery store.

Hello!! I'm a bit new to the FM Editor and I'm trying to edit DanFMDatabases' E20 - England Level 20, mainly adding some regional cups. But while I was messing around with the database I noticed the regional promotion/relegation system and I don't know if it's working correctly or not in the game.
For example, how can I ensure that club A, which is in the Isthmian League First Division, is promoted to the National League South instead of the National League North?
And how can I guarantee that if this club is relegated from the National League South, it will go to the Isthmian League First Division rather than the Southern League South First Division or the Northern Premier League First Division?

Hey guys,
I am a pilot by trade and keep my passport in my backpack in a secretish compartment. Anyway im an idiot and washed my bag, passport inside. I am going to China again in September so need to get my visa sorted. Do i need to apply for a new visa after replacing my Canadian passport or can I just travel with the washed one and new passport? ID page and visa page are perfectly legible its just that it looks a little wrinkled now.
EDIT: One issue i could see is the entry stamps bled into the visa a bit, but still can read everything...

Hey 25M here and when it comes to relationships I have things that give me anxiety, of course depending on few cases I've seen particularly in recent times.
So Most of the girls I've seen (seniors, batchmates) they usually say 25 is too early for marriage and they say they want to get married around 27-29 ish just before 30. I don't have anything for or against this opinion of theirs, but it's their logic that makes me more anxious about marrying a girl. Few cases when this marriage topic came up, they usually say, they have to see the life, experience and set their career and Focus on them selves. Which sounds very ideal. But their actions doesn't just add up, it all just comes to staying in the job that pays just enough to live like they want and I never seen any of them till now doing investments or plan on savings, anything of that sort. Now coming to commited relationships, most of these girls were not single at all, they're already in their 2nd/3rd+ relationship and well aware they're not dating that guy to marry. But he fills the role of companionship for intimacy/validation/attention, while they live their life at their will with option to break it off whenever they wan or promote him for husband only if their family agrees.
So now, the anxious part, So for a typical girl who spent life from 21-28 in this life style, now goes for an arrange marriage for a well settled, high earning dude who shouldn't give a fuk about their life choices till then. My question here: is it fair to give all the energy, time and efforts at the best of your youth to partying, frnds and on&off relationships and whoever the dude, whos going to marry you and spend rest of his life, all he gets is that left over trauma and wornout version of her in the name of maturity..? Do women just think marriage as some backup plan when they feel tired of their lifestyle..?
Your honest opinion can really help, I know a girl who does exactly that and someone I know might be her fiance, if things go well. I have no plans in saying anything to anybody, but I needed some place to let my thoughts go.
Open to every opinion.. Except: "Age is just a number, 30 is new 16 bullsiht"
Age is measure of our time in this world and time can bend one to his knees. Those things only work partially when one's super rich or just genetically blessed. So kindly keep those opinions to yourselves.
Edit: "worn out version" I refer to the deteriorated body/health (i.e smoking, drinking, digestion, sugar, isonmia etc..)

Played a 2.5k game against tyranids, my foe I knewn would have some damage two flammers and two big blobs of genestealers with broodlord so I took the following: 10 Terminators 1 Sorcerer in term armour 1 Vindactor 10 Havocs 1 Warpsmith 60 Legionaires 1 Sorcerer (with the soul link) 1 Chaos lord 3 MOE 1 Dark Apostle 20 Cultist Using our sub faction rule I did a semi aggressive deployment favoring my right flank, placing half the cultist on the right objective, backed up by two melee squads of ten each legionaries further back (One no attachments, other with regular Sorcerer and a MOE). While I placed my Dark Apostle with MOE in a squad of 10 legionnaires about 4 inches forward of my deployment zone but behind a big piece of cover. My friend got first turn, scout moved his genestealers forward, and moved forward with most of his army. Some overwatch killed 4 genestealers. His shooting killed most of my infiltrating units, and killed just shy of 30 legionaries. He also killed the 10 forward placed cultist on my right flank, 5 of my havocs on my left, decimated my Dark apostle unit and the chaos lord units. His charge and fight phase would wipe out my warpsmith, 5 more havocs and my regular sorcerer unit.
He kindly let me have a rematch and for me to change my list. I removed my terminators and added 40 more cultist and another 5 havocs. I decided to go all in with the infltrate, once again favouring the right flank with an even more aggressive deployment banking on that first turn rush. He got first turn, with me having a near repeat of the last time I conceded once again, thanked him for his time.
What I did learn was a few things, beyond the obvious swinging nature of over committing to infiltration was just how squish we are. Our lack of an equivalent to AOC, a very limited reaction move strat and a lack of good flammers make us feel very flimsy. This is compounded when you remember we are giving up critical hits on 5+, and ease Command Point generation. We feel like a very aggressive sub faction that does have a few interesting cards but the lack of stealth, good reactive shooting, no ability to alter one deployment, lack of AOC equiv, no good HQs to buff shooting (outside terminator sorcerer) and ways to get command points to use our good if sometimes a little niche strats can be devastating. I plan to try again next week with a list focusing less on our sub faction rule and more on a lot of havocs, legionaries with two squads of raptors and far fewer support characters to see if that is better. Yet I am struggling to find a good use of our shooting stratagem that acts the same way a MOE does in melee, the detonate stratagem can be very useful though requires us to be close, our charge strat can be a great way to get a deep strike unit into melee, our reactive stratagems feel weak, not to mention our relative lack of CP and the fact only two of our 6 stratagems can be used for free by our chaos lord. I feel we are weaker then the index sub faction. Not to mention we have no way to buff cultist, like we did a few editions ago or even anything for redeploy.
What do you fellow alphla legionaries think? What lists do you intend to take? Ands whats your out look on the new codex thanks for your time.

Until two weeks ago I was set on a 14900K, 96GB 6400 DDR5 CL32, 4080 Super, x3 Nvme PC for video/photo editing. I've watched so many videos about Intel issues, but can't find new production benchmarks resulting from the nerf coming from motherboard manufacturers. Obviously don't want degradation.
Any insight on if the 14900K still wins out post-nerf vs. AMD 7950 x or 3dx? Mainly working with H265 and H264 footage.

FELLOW HELLDIVERS,
If we stay on Erata Prime and take it then we will automatically defend Heeth, by virtue of cutting the supply line. I see that currently half the Helldivers that were on Erata Prime have peeled off for the defend order. This is major strategic error.
EDIT: pretty much everyone has gone to Heeth
If we fail the defend order, which is likely, then we will lose access to Erata Prime altogether and have to start a whole new liberation campaign on Heeth. That will tie up our forces that could be deployed at Aesir Pass for at least a day.
Heeth is at 0 percent. Erata Prime is at 50 percent and the we do not have to do defend missions over and over on Erata Prime. We should be diving on Erata Prime and Aesir Pass if we do not want to fail ANOTHER major order.
I hope they make the supply lines visible soon. I think they are hidden deliberately to make it easier to bait the community to certain planets.
BRASCH TACTICS, USE THEM OR DIE TRYING.