Homemade dust collector plans
Mace Windu: Formicidae Face-off
2024.05.21 13:02 Spike_78822 Mace Windu: Formicidae Face-off
Mace Windu: Formicidae Face-Off
In the distant reaches of the galaxy, the planet Arthron Prime lay hidden within the Veiled Nebula. Arthron Prime was a lush, green world teeming with strange and unique wildlife, including the formidable Formicidae—giant, intelligent ants that ruled the forested regions.The Galactic Republic had recently established an outpost on Arthron Prime to study its diverse ecosystems and extract valuable resources. However, this attracted the attention of the Separatists, who saw an opportunity to disrupt the Republic's plans and gain control of the planet's resources.
One fateful day, a detachment of the 187th Legion, led by the esteemed Jedi Master Mace Windu, was dispatched to reinforce the Republic outpost. The mission was to protect the scientists and secure the area from any potential threats. Little did they know, danger lurked in the dense forests.
As Mace Windu and his troopers patrolled the perimeter, they were ambushed by a swarm of Formicidae, led by a massive, alpha ant. The creature's mandibles clamped around the throat of a 187th Clone Trooper, rendering him helpless. The trooper struggled in vain as the ant's powerful grip tightened.
Without hesitation, Mace Windu ignited his purple lightsaber and leapt into action. With a forceful slash, he severed the ant's mandibles, freeing the trooper. The Formicidae, undeterred, turned its attention to Windu, its multifaceted eyes glinting with fury.
Mace Windu's movements were a blur of precision and power as he engaged the ant in a fierce duel. The surrounding troopers provided cover fire, but the battle was primarily between the Jedi and the beast. The alpha ant's size and strength were formidable, but Windu's mastery of Vaapad allowed him to channel the creature's aggression against it.
With a final, decisive strike, Mace Windu drove his lightsaber through the ant's exoskeleton, bringing the beast down. The remaining Formicidae retreated into the forest, their leader vanquished.
As the dust settled, the 187th Legion regrouped. Mace Windu approached the trooper who had been attacked and placed a reassuring hand on his shoulder. "You're safe now," he said, his calm voice a stark contrast to the intensity of the battle moments before.
The victory on Arthron Prime was a testament to the bravery and skill of the 187th Legion and their Jedi leader. With the immediate threat neutralized, the Republic could continue their mission on the planet, ensuring the secrets of Arthron Prime were safeguarded from the clutches of the Separatists.
2024.05.21 12:16 mattposts6789 A fun game variant: have secret and public objectives swap places!
This is a variant I've played three games with now, and its really superb. The full rules go like this:
1- During setup, set aside the following SOs: Destroy their Greatest Ship (Destroy another player's war sun or flagship. ), Make an Example of Their World (Use BOMBARDMENT to destroy the last of a player's ground forces on a planet. ), Turn Their Fleets to Dust (Use SPACE CANNON to destroy the last of a player's ships in a system.), and Form a Spy Network (Discard 5 Action Cards.).
2- Shuffle the rest of the SOs together, and pick 5. These are now the Stage I Public Objectives. They work just the same as in the real game- with the exception that if they come up, Spark a Rebellion (Win a combat against a player who has the most victory points) and Unveil Flagship (Win a space combat in a system that contains your flagship) are able to be scored in the Action Phase, as soon as you fulfil them. For the rest, you can only score 1 in the Status Phase (unless you have Imperial) just like the vanilla game.
3- Shuffle together the unused SOs, the set aside SOs, and the real Stage I POs. These now form a common Secret Objectives deck. Secret Objectives are unchanged from the base game.
NOTE: we're only using the base game here, friends and I are too broke to shell out for POK.
I don't think this will ever beat the base game; but as a refreshing novelty I can 100% recommend. The other 3 Action Phase secrets need to be kept out of contention for obvious reasons, and while you could leave Form a Spy Network in there, I just think that it would get boring if everyone was stockpiling Action Cards.
I once had the pleasure of playing this variant, and had Spark a Rebellion, Unveil Flagship, and Adapt New Strategies (Own your two faction techs) come up as Public Objectives. We hadn't sorted out all the kinks of this variant at that stage, so we had all 5 Action Phase SOs in the running to come up as public objectives, and Destroy Their Greatest Ship (Destroy another player's war sun or flagship) came up as the fifth Stage I Public Objective, when there were already 3 flagships on the board. I'll remember that night for the rest of my life.
LESS SPICY VARIANT: Another way to spice up objectives is to have the first two Stage I POs be base-game POs, and the other 3 Stage I POs be secrets. This is probably a far more robust system than what I am proposing above. Usually if we do this, we have the first two POs set as Expand Borders (Control 6 planets in non-home systems )and Intimidate Council (Have 1 or more ships in 2 systems that are adjacent to Mecatol Rex's System). That is because these two objectives encourage conflict, which leads to more exciting games. We always use these 2 as the 2 starting objectives if we have new players, because let's face it, games with 5 non-conflict Stage Is can get boring.
ONLY MILDLY SPICY VARIANT: Replace only the third Stage I PO with a secret. We have played this way once to add a touch of spice, and we plan to now do this in every game, unless we're playing my variant, or the Red Tape variant that is also very popular.
submitted by mattposts6789 to twilightimperium [link] [comments]
1- During setup, set aside the following SOs: Destroy their Greatest Ship (Destroy another player's war sun or flagship. ), Make an Example of Their World (Use BOMBARDMENT to destroy the last of a player's ground forces on a planet. ), Turn Their Fleets to Dust (Use SPACE CANNON to destroy the last of a player's ships in a system.), and Form a Spy Network (Discard 5 Action Cards.).
2- Shuffle the rest of the SOs together, and pick 5. These are now the Stage I Public Objectives. They work just the same as in the real game- with the exception that if they come up, Spark a Rebellion (Win a combat against a player who has the most victory points) and Unveil Flagship (Win a space combat in a system that contains your flagship) are able to be scored in the Action Phase, as soon as you fulfil them. For the rest, you can only score 1 in the Status Phase (unless you have Imperial) just like the vanilla game.
3- Shuffle together the unused SOs, the set aside SOs, and the real Stage I POs. These now form a common Secret Objectives deck. Secret Objectives are unchanged from the base game.
NOTE: we're only using the base game here, friends and I are too broke to shell out for POK.
I don't think this will ever beat the base game; but as a refreshing novelty I can 100% recommend. The other 3 Action Phase secrets need to be kept out of contention for obvious reasons, and while you could leave Form a Spy Network in there, I just think that it would get boring if everyone was stockpiling Action Cards.
I once had the pleasure of playing this variant, and had Spark a Rebellion, Unveil Flagship, and Adapt New Strategies (Own your two faction techs) come up as Public Objectives. We hadn't sorted out all the kinks of this variant at that stage, so we had all 5 Action Phase SOs in the running to come up as public objectives, and Destroy Their Greatest Ship (Destroy another player's war sun or flagship) came up as the fifth Stage I Public Objective, when there were already 3 flagships on the board. I'll remember that night for the rest of my life.
LESS SPICY VARIANT: Another way to spice up objectives is to have the first two Stage I POs be base-game POs, and the other 3 Stage I POs be secrets. This is probably a far more robust system than what I am proposing above. Usually if we do this, we have the first two POs set as Expand Borders (Control 6 planets in non-home systems )and Intimidate Council (Have 1 or more ships in 2 systems that are adjacent to Mecatol Rex's System). That is because these two objectives encourage conflict, which leads to more exciting games. We always use these 2 as the 2 starting objectives if we have new players, because let's face it, games with 5 non-conflict Stage Is can get boring.
ONLY MILDLY SPICY VARIANT: Replace only the third Stage I PO with a secret. We have played this way once to add a touch of spice, and we plan to now do this in every game, unless we're playing my variant, or the Red Tape variant that is also very popular.
2024.05.21 12:00 AutoModerator Weekly Team Help Megathread!
Hello and welcome to the Team Help megathread! This is a weekly thread for advice on team building for Arena Cups and GO Battle League! You can ask for feedback on your battle teams, for help on which Pokémon and moves to use, to get opinions on which Pokémon to invest candy/dust in, or any other team questions you may have! This thread will allow newer battlers to get help more easily, and more experienced competitors to spread their knowledge and help the community improve their skills.
A few guidelines:
__ __
Want to learn more about the Silph Arena and Pokémon Go PvP? Check out the following links!
Join the Arena Discord ServerAbout the Arena Competitive Season
Guide to Player Rank
Getting started in PvP
Team Building Basics
Find a local community or tournament near you!
Arena Tournament Map
Silph League Community Map
Resources for Tournament Organizers!
How-to Host a Tournament
Guide to Remote Tournaments
Helpful Resources for Planning and Organizing Tournaments
submitted by AutoModerator to TheSilphArena [link] [comments]
A few guidelines:
- Keep it civil and constructive: Above all, the goal of this thread is to help players improve and get advice on their teams. Rude, cynical, off-topic, or accusatory posts against individuals or groups will be removed. Let’s be excellent to each other!
- Help where you can: We need experienced battlers to lend their expertise and give advice! If you see someone you can help, please leave a comment or feedback for them.
- Limit your requests: In order to give everyone a fair shake at receiving advice, try to limit your request posts to once or twice per week. The PvP community is growing every day, and we want to make sure everyone gets the help they need!
- Give details in your post: When asking for team advice, be sure to include some background. Tell us what League or Meta you need help with, what your rank/tierating is, what resources or Pokémon you may have to invest, and what your goals are. The more details you give, the more likely your questions will be answered.
__ __
Want to learn more about the Silph Arena and Pokémon Go PvP? Check out the following links!
Join the Arena Discord ServerAbout the Arena Competitive Season
Guide to Player Rank
Getting started in PvP
Team Building Basics
Find a local community or tournament near you!
Arena Tournament Map
Silph League Community Map
Resources for Tournament Organizers!
How-to Host a Tournament
Guide to Remote Tournaments
Helpful Resources for Planning and Organizing Tournaments
2024.05.21 11:56 ONsoleOFFICIAL Wiimote or psmove or kinekt?
In the last few months I have been planning to make a small homemade VR kit with my mobile, a VR kit for mobile phones and so on. But I still haven't decided which control to choose or which one is best for pcvr, wiimote with nunchuck, two PS move controllers or a kinect I want you to take into account how easy it is to use them and configure the necessary programs to connect them and the functions they have. I mainly want them to play half life alyx, vr chat, hl 1 and 2 with their respective vr mods and ultrakill vr mod
submitted by ONsoleOFFICIAL to virtualreality [link] [comments]
2024.05.21 11:49 BuildingGrouchy2760 Top Pest Control Services in Ghaziabad
 | Pest infestations are a common problem in urban areas, and Ghaziabad is no exception. Whether it's rodents, termites, cockroaches, ants, or bedbugs, pests can cause significant damage to property and pose serious health risks. This blog aims to guide you through the top pest control services in Ghaziabad, with a special focus on Care Green Pest Control, a leading service provider known for its effective and eco-friendly solutions. submitted by BuildingGrouchy2760 to u/BuildingGrouchy2760 [link] [comments] https://preview.redd.it/shct9hcvwq1d1.png?width=1080&format=png&auto=webp&s=c71045710c41c5ef7aa3320d4e61f36701ac3a12 Why Pest Control is EssentialPests can be more than just a nuisance. They can:
Criteria for Choosing a Pest Control ServiceWhen selecting a pest control service in Ghaziabad, consider the following factors:
Top Pest Control Services in GhaziabadHere are some of the top pest control services in Ghaziabad, known for their reliability and effectiveness:1. Care Green Pest ControlOverview: Care Green Pest Control is a leading pest management company in Ghaziabad, renowned for its comprehensive and eco-friendly pest control solutions. They offer a wide range of services tailored to meet the needs of both residential and commercial clients.Services Offered:
Customer Service: They offer prompt and courteous service, with a focus on customer satisfaction. Their technicians are well-trained and provide detailed information on the treatments and preventive measures. Pricing: Competitive pricing with customized plans to suit different budgets and requirements. Contact Information: Website: https://caregreenpestcontrol.com/ Phone: 8126223626 2. Urban Pest ControlOverview: Urban Pest Control is another well-regarded pest control service in Ghaziabad, known for its advanced pest management techniques and customer-centric approach.Services Offered:
Customer Service: They offer excellent customer support, with quick response times and professional service. Pricing: Moderate pricing with various service packages available. Contact Information: Website: https://caregreenpestcontrol.com/ Phone: 8126223626 3. Green Earth Pest ControlOverview: Green Earth Pest Control focuses on providing safe and eco-friendly pest control solutions. They cater to both residential and commercial clients in Ghaziabad.Services Offered:
Customer Service: Friendly and responsive customer service, with a strong emphasis on client satisfaction. Pricing: Reasonable pricing with discounts available for long-term contracts. Contact Information: Website: https://caregreenpestcontrol.com/ Phone: 8126223626 4. Pest Free SolutionsOverview: Pest Free Solutions offers a wide range of pest control services with a focus on quality and reliability.Services Offered:
Customer Service: Responsive and professional, with a commitment to addressing client concerns promptly. Pricing: Competitive rates with customized service plans. Contact Information: Website: https://caregreenpestcontrol.com/ Phone: 8126223626 ConclusionChoosing the right pest control service in Ghaziabad is crucial for maintaining a safe and healthy environment. Among the top service providers, Care Green Pest Control stands out for its eco-friendly approach, comprehensive services, and commitment to customer satisfaction. Whether you're dealing with termites, rodents, or any other pest, these companies offer reliable and effective solutions to keep your home or business pest-free. Remember to consider factors like reputation, experience, and eco-friendliness when selecting a pest control service to ensure the best results. |
2024.05.21 11:49 Count-Daring243 Best Cold Steel Smatchet
 | submitted by Count-Daring243 to u/Count-Daring243 [link] [comments] https://preview.redd.it/pksvc1n24r1d1.jpg?width=720&format=pjpg&auto=webp&s=b7bbd87f65c9604c366faad3911ca9f003c0990f In the world of blades, the Cold Steel Smatchet has made a name for itself. Known for its versatility and quality, this product has caught the attention of many. In this article, we will delve into the unique features and benefits of the Cold Steel Smatchet, showcasing why it has become a popular choice among customers. Come with us as we explore the world of blades and discover what makes the Cold Steel Smatchet stand out from the rest. The Top 20 Best Cold Steel Smatchet
Reviews🔗Stanley Quick Flip Go Water Bottle: 24 oz., Tigerlily, Dishwasher Safehttps://preview.redd.it/70u2s2334r1d1.jpg?width=720&format=pjpg&auto=webp&s=f71c05c8affa7a4c94dfbb6b87590203cbfc4684 As a product reviewer, I've had the pleasure of trying out the Stanley 24 oz. Quick Flip Go Water Bottle in the Tigerlily color. This water bottle has become a staple in my daily routine. The first thing that caught my eye was its sleek design – perfect for carrying on the go. The double-wall vacuum insulation is a real game-changer. Whether I'm sipping on iced water in the summer or a hot cup of tea in the winter, the temperature remains consistent for hours. One feature I particularly appreciate is the trigger-action lid. It's easy to use and helps prevent spills, making it great for when I'm on the move. Plus, the fact that it's dishwasher safe is a lifesaver. No more scrubbing by hand! However, there are a couple of downsides. Firstly, the weight of the bottle can be a bit of a struggle for those who prefer a lighter option. Secondly, the dimensions might not fit all car cup holders, which can be a hassle during road trips. Overall, the Stanley Quick Flip Go Water Bottle has been a reliable companion in my everyday life. Its combination of style, functionality, and durability make it a must-have for anyone looking for a reliable water bottle. 🔗Cold Steel Heavy Duty Nylon Cane with Rubber Ferrulehttps://preview.redd.it/v48i5gn34r1d1.jpg?width=720&format=pjpg&auto=webp&s=64aac772c9910fa7f43dc2f916fb8b53b380e7fc I've been using the Cold Steel Heavy Duty Cane in my daily life, and it has proven to be quite the companion. The nylon handle provides an enhanced grip that makes it convenient to hold, while the steel construction ensures structural strength for long-term use. I particularly appreciate the rubber ferrule, which is designed to be slip-resistant, making it an excellent choice for uneven terrain or icy sidewalks. One downside is that it might be a bit heavy for some people, especially those who don't need the extra weight for support. However, the overall design and engineering of the cane are top-notch, and it gives me a sense of reassurance knowing I have a sturdy and reliable walking staff whenever I need it. 🔗Cold Steel Special Forces Shovel: Robust, Stainless Steel Outdoor Essentialhttps://preview.redd.it/onud1it34r1d1.jpg?width=720&format=pjpg&auto=webp&s=19aa78d8c58949aae696362f44a26b21b9da0dca This past summer, I found myself on a weekend camping trip and realized I didn't pack a shovel. I needed to dig a small trench around my campsite to divert water. Luckily, a friend had a Cold Steel Special Forces Shovel that he let me borrow. On the first day, he taught me how to use it. The edge was sharp, and the handle felt sturdy. I was surprised by how strong it was. I struggled a bit at first, but it didn't take long before I was able to dig the trench. After returning from the camping trip and reflecting on the weekend, I realized that the shovel had some flaws. Firstly, it was a bit heavy for a camping trip, and I felt it could cause strain on my back over time. Secondly, it didn't come with a sheath, which was inconvenient since I had to keep it in my vehicle's trunk, where it took up too much space. Despite these issues, I still appreciated the durability of the Cold Steel Special Forces Shovel. It was clear that it was designed for heavy-duty tasks. The edge remained sharp even after I used it heavily. The wooden handle felt comfortable to hold, even though it was a bit on the thick side. Overall, the Cold Steel Special Forces Shovel was a functional tool, but it could be improved for camping trips or situations where portability is a priority. 🔗Cold Steel Smatchet: Deluxe Edition for Playstation 5https://preview.redd.it/duzypj644r1d1.jpg?width=720&format=pjpg&auto=webp&s=4feb4a7502a34a0974f6539f3524c5dc9b0652ab As someone who thoroughly enjoyed diving into the Legend of Heroes: Trails of Cold Steel III and IV, let me share my experience with this dynamic duo. The deluxe edition for Playstation 5 was a refreshing return to the rich world of Erebonia, where war hero Rean Schwarzer began his new life as an instructor at Thors Military Academy's branch campus. What stood out to me was how the game expertly handled the aftermath of the Erebonian Civil War and introduced new threats to keep the story alive. Delving into it with the improved RPG gameplay on PlayStation 5 made my journey even more immersive. Plus, the cosmetic DLC available with these iterations ensured that every member of my party was looking their best, adding a unique touch to the experience. However, like any other game, it wasn't all smooth sailing. There were moments that were a bit challenging, but overall, the Legend of Heroes: Trails of Cold Steel III and IV truly delivered an engaging experience that I thoroughly enjoyed as a fan of the genre. 🔗Heavy Duty Cold Grease Remover for Effortless Cleaninghttps://preview.redd.it/u3w4xrr44r1d1.jpg?width=720&format=pjpg&auto=webp&s=c04c7764c1fb93b8481b812e63772b4366bf500d As a home cook who's always experimenting with new recipes and kitchen tools, I've found myself in a bit of a pickle when it comes to removing stubborn grease from my appliances. That's why I was thrilled to try the Shumanit Cold Grease Remover. Right off the bat, I found it remarkable how quickly this cold grease remover works. No need for a heat source or any harsh chemicals. In fact, it's effective on all sorts of surfaces - my oven, pots, frying pans, baking trays, stainless steel dishes, cooking surfaces, steam extractors, and even hard-to-clean vents. I've had my fair share of leaky packages in the past, but the Shumanit Cold Grease Remover was surprisingly well-packed. It comes in a sturdy plastic bottle with a trigger spray that's easy to use. The product has a delightful citrus smell that lifts the spirits while I'm getting my hands dirty in the kitchen. Plus, the grease and grime just seem to vanish as if by magic. However, there's one small downside to my Shumanit experience. On one occasion, the package was partially leaking, which made me worry about the condition of the other products in the batch. I just hope it was a one-time issue and not a trend. To sum up, the Shumanit Cold Grease Remover is a truly versatile and effective grease and grime remover. It's a lifesaver for anyone who values a sparkling clean kitchen. Let's just hope the packaging improves in the future. 🔗Insulated Stanley Classic Legendary Bottle: Perfect for Outdoor Adventureshttps://preview.redd.it/94c0sq154r1d1.jpg?width=720&format=pjpg&auto=webp&s=5e05bc9a8d38beb755f6ee94776ff2533d2ed8d3 The Stanley Classic Legendary Bottle is a versatile and durable companion for any outdoor excursion. It's been a part of my camping adventures for years, ensuring that my beverages stay the perfect temperature no matter the weather. The thick stainless steel walls not only keep my iced drinks cold for two days but also keep my hot beverages warm for up to two weeks. Plus, the leak-proof lid doubles as a cup, providing a convenient and easy-to-use option for sipping on the go. The 2.5-quart capacity is ideal for sharing drinks with friends or keeping a large quantity of your favorite beverage at the ready. I've washed my Stanley Classic Legendary Bottle in the dishwasher without any concerns about rust or BPA exposure, and it continues to perform as well as it did on day one. Overall, the Stanley Classic Legendary Bottle has become an essential part of my outdoor gear, and I can't imagine spending time in nature without it. 🔗Stanley Vacuum Insulated 1.5qt Bottle: Leakproof and Durable for Any Adventurehttps://preview.redd.it/hv1cfgh54r1d1.jpg?width=720&format=pjpg&auto=webp&s=92c3e83a1e6ed9bde65bd49c95962c0425bd9025 For my outdoor adventures, the Stanley Legendary Classic Bottle 1.5qt Habitat has truly been a game-changer. This insulated beverage container ensures my drinks remain at the perfect temperature for hours on end, whether I'm savoring a hot cup of coffee on a chilly morning or enjoying an icy beverage on a sweltering day. One of my favorite features is the stainless steel construction, which not only makes the bottle sturdy and durable but also ensures it's free of BPA, a nice touch for any health-conscious individual. The double-wall vacuum insulation, another key highlight, works wonders in keeping my beverages at their desired temperatures, even in extreme conditions. However, I found that the bottle can be quite difficult to clean, especially along the insulated areas. Additionally, the screw cap lid, while functional, can be a bit tricky to twist off after a while, depending on the grip strength. These minor inconveniences aside, the Stanley Legendary Classic Bottle has proven to be an indispensable companion on all my outdoor excursions. 🔗Versatile Cold Welding Formula for Robust Bondshttps://preview.redd.it/4ogfz5u54r1d1.jpg?width=720&format=pjpg&auto=webp&s=c4866a573a4c06607a53a48abca3bb57ecd3aa95 Recently, I got my hands on the J-B Weld Original Cold-Weld Formula Steel Reinforced Epoxy. I was intrigued by the fact that it could serve as an inexpensive alternative to welding, soldering, and brazing. To my surprise, this versatile epoxy proved to be a game-changer in my daily life. One of the most impressive features of the J-B Weld epoxy is its water-resistant nature. I used it to seal a leak in my water pipe, and it worked like a charm. The epoxy's petroleum and chemical resistance made it perfect for my project, as it withstood various tests without any damage. Another standout feature of this product is its non-toxic and safe-to-use nature. I used it to fix my child's broken toy, and its safety made me feel more comfortable. However, I did notice that the mixing ratio of the epoxy is quite sensitive. One must be cautious not to deviate too far from the 1-1 ratio of liquid steel/epoxy resin and the hardener. A slight miscalculation could result in a weaker bond or the need for reapplication. In conclusion, the J-B Weld Original Cold-Weld Formula Steel Reinforced Epoxy is a must-have for DIY enthusiasts and professionals alike. Its ease of use, remarkable strength, and versatility make it a standout product in its category. Despite the minor drawback of the mixing ratio, the benefits far outweigh the inconvenience. 🔗Insulated Bottle for Long-Lasting Beverageshttps://preview.redd.it/hjiqws764r1d1.jpg?width=720&format=pjpg&auto=webp&s=778b7036f610f7931a5d1bf47b1544b1da25f09e I recently put the Stanley Classic to the test on an outing to the mountains. This bottle is a true companion for outdoor enthusiasts, with its impressive 18/8 stainless steel construction and BPA-free design. The 1.5 quart capacity means it can handle all types of drinks, from hot coffee to icy coolers, and keep them at the optimal temperature for up to two days. The folding handle is a clever added feature that allows for easy carrying without the risk of it rolling away. One of the standout features of this bottle is its leakproof design, making it a reliable option for packing in a backpack or storing in a truck bed. The wide mouth also makes it easy to fill and clean, which is especially helpful for those who enjoy making their own homemade brews. However, I did notice that the bottle is quite heavy, weighing in at 2 pounds, making it more challenging to carry for longer periods of time. Overall, the Stanley Classic is an excellent investment for those who love spending time outdoors and need a reliable companion to keep their drinks at the perfect temperature. 🔗Portable Insulated Water Bottle with Silicone Strawhttps://preview.redd.it/l5lg54i64r1d1.jpg?width=720&format=pjpg&auto=webp&s=e07172bcc88a069950d96dd4cfb862f209f40f40 I recently had the chance to put the Cooper Stainless Steel Water Bottle to the test, and I have to say, it impressed me with its performance. The most standout feature of this water bottle is its ability to keep drinks cold for an impressive amount of time. I often struggle to find a water bottle that can truly keep my beverage chilled all day long, but this one did just that. The double-walled and vacuum insulated design does an excellent job of maintaining the temperature of the liquid inside. Another feature I appreciated is the leak-proof lid. No matter how rough I was with it, it never leaked once. The one-touch silicone push button locking mechanism helped keep my bag and clothes dry, while the straw was a fun and convenient addition. Cleaning it was also a breeze, thanks to the top rack dishwasher safe lids and BPA-free materials. However, I did experience a downside with the product - it isn't suitable for hot beverages. If you're someone who prefers drinking tea or coffee, this may not be the best option for you. Additionally, I found it slightly difficult to fit the bottle in my usual cup holders, which can be inconvenient during travel or at the gym. Overall, the Cooper Stainless Steel Water Bottle did an incredible job of keeping my drinks cold and providing a leak-proof, easy-to-clean design. Although there were minor drawbacks, I still enjoyed its benefits and would definitely recommend it to anyone looking for a reliable and stylish water bottle. 🔗Stanley 1.1 Qt. Legendary Classic Canteen - BPA-Free Stainless Steelhttps://preview.redd.it/fva5u8074r1d1.jpg?width=720&format=pjpg&auto=webp&s=021a8e122aa23b47e0dbf977a9a0b77939f8066e I recently had the chance to try out the Stanley 1.1 Qt. Classic Canteen, a 18/8 stainless steel bottle that promises to be leakproof, packable, and perfect for outdoor use. At first glance, the canteen looks sleek and sturdy, with a classic design that makes it easy to hold and carry around. It comes equipped with a removeable carrying strap that keeps your hands free and adds a touch of style to the canteen. One of the standout features of this canteen is its non-insulated stainless steel material, which allows for easy packing while still offering a decent capacity for your favorite beverage. However, I found that the lack of insulation means that the canteen doesn't retain temperature as well as I would have liked. While it's fine for day-to-day use, it's not ideal for taking on long hikes or camping trips where maintaining the temperature of your drink is important. Another downside to the canteen is the attached cap, which can be a bit tricky to open and close, especially with one hand. Though I appreciate the convenience of having it attached, it would be nice if the cap were more user-friendly and easy to access. Additionally, the metal clips on the carrying strap can be quite loud when walking or hiking, which can be a bit distracting and might not be the most discreet choice for stealthily navigating through the wilderness. Despite these minor drawbacks, overall I found the Stanley 1.1 Qt. Classic Canteen to be a functional and stylish option for everyday use. It's a good choice if you're looking for a versatile water bottle that won't break the bank, but just remember to manage your expectations when it comes to insulation and noise. 🔗Corkcicle 32oz Sport Canteen: Triple-Insulated, Wide-Mouth Drink Container with Quick Sip Lidhttps://preview.redd.it/g8jdgja74r1d1.jpg?width=720&format=pjpg&auto=webp&s=5900642083119fc5f56b1e9d8f8477efab04f303 The Corkcicle 32oz Sport Canteen boasts a spacious 950mL capacity, perfect for hydration while on the go. Its quick sip lid adds convenience to everyday use, and the signature flat sides and Duraprene finish ensure a secure grip. Triple-insulation maintains drinks at their desired temperature for extended periods, making it an ideal choice for both hot and chilled beverages alike. A wide mouth allows for ice cube insertion, while the lid's easy-to-use one-hand opening adds practicality. Regrettably, some users have experienced issues with the lid's functionality and structure, which may prove a disadvantage for those seeking a seamless drinking experience. Nonetheless, for those seeking a durable, stylish, and functional water bottle, the Corkcicle 32oz Sport Canteen offers an impressive range of features. 🔗Versatile Insulated Water Bottle with Cup Lidhttps://preview.redd.it/ba7lnum74r1d1.jpg?width=720&format=pjpg&auto=webp&s=4236dde9fc2a1109edb6d8a02ff4d627c9fb186e This Stanley Classic Legendary Bottle, aptly named "Nightfall, " has become an essential companion in my daily life. The bottle's robustness and dependability have captivated me, as my newfound favorite keeps the brew piping hot during those frigid mornings or even chills your favorite beverage during scorching summer days. One of the key features that have blown my mind is its innovative, leak-proof design. By using the twist-and-pour stopper, it ensures that my adventures are safe from any accidental mishaps involving the bottle. Moreover, the slim design makes it the perfect single-handed companion, ensuring a comfortable grip. However, there are a couple of minor nits. The lid being insulated and doubling as a cup is a fantastic idea, but I found it a tad more tedious than convenient during my first few times. Additionally, while the bottle's sturdiness won my heart, it unfortunately lacks a wider mouth, which might make it a bit more practical for my soup-loving, chunky ingredients cravings. The Stanley's performance has made me believe it's not just about the product but also about the spirit of adventure it represents - one sip at a time. Despite a few minor quirks, it's a reliable bottle worth every penny spent. 🔗Corkcicle Star Wars Darth Vader Canteen: Sleek and Stylish Insulated Travel Drink Bottlehttps://preview.redd.it/xxibmox74r1d1.jpg?width=720&format=pjpg&auto=webp&s=6584f5a3f92b026e1f6c93d8578b4827c47490b6 Crafted in the image of the infamous Darth Vader, this Corkcicle Star Wars canteen is not just a stylish way to keep your drinks cool. The 16-ounce canteen promises to keep beverages cold for up to 25 hours or warm for 12, all thanks to its triple-insulated lining. Its stainless steel construction ensures it's not just durable but also perfect to use in any setting, be it by the pool or at the office. The canteen is equipped with a screw-on cap that prevents any liquid from escaping and keeps the temperature consistent inside. The ergonomic design and flat sides make it easy to grip, and its stay-put silicone base ensures it stays securely in your hand, avoiding any spills. My experience with this canteen has been nothing but stellar. The Star Wars design is not just aesthetically pleasing but also adds a fun touch to my everyday life. The triple-insulation keeps my beverages at their desired temperature for longer, especially during our hot summers. The cap is a great feature that prevents leaks and spills, and the ergonomic design makes it comfortable to hold. However, I wish the product was dishwasher safe as the paint tends to peel off after a few uses, which can be a bit disappointing. 🔗Premium High-Performance Goalie Blades for Enhanced Ice Skatinghttps://preview.redd.it/v6nom9a84r1d1.jpg?width=720&format=pjpg&auto=webp&s=47b008d8785f16fed2eb4304d81b2404921a0708 I recently tried the Step Steel St Goal Blacksteel CCM Replacement Steel - Pair, and I was blown away by its performance. The superior edge quality is evident as it slices through the ice with minimal resistance, providing sharp, fluid movements that make it a game-changer for any goalie. Designed specifically for CCM 2-Bolt Goalie Cowlings, this complete set comes with both left and right runners, ensuring perfect fit and seamless functionality. Made in Canada, the high-quality craftsmanship is evident in every aspect of the blade, from its sleek design to its exceptional edge durability. While the hardest possible edge offered by Step Steel Black is undoubtedly impressive, I also appreciate the added Diamond-like carbon (DLC) coating on the mirror side finish, which significantly boosts blade performance by generating a winning combination of low friction and high surface hardness. What sets Step Steel apart from other blade manufacturers is their innovative aspect ratio, which accelerates pushes across the crease for modern butterfly and hybrid goaltenders. The taller blades and truer profile offer added stability, precision, and width, ensuring less bending or improper sizing upon receiving the product. Overall, the Step Steel St Goal Blacksteel CCM Replacement Steel - Pair is a game-changing product that combines superior edge quality, innovative design, and unrivaled performance. If you're looking to enhance your goaltending experience, look no further than Step Steel. Buyer's GuideWelcome to our comprehensive guide on the Cold Steel Smatchet. This guide will help you understand the essential features of this product, the considerations you should make when purchasing, and general advice for using and maintaining it. Remember that specific product picks and external resource links are not included in this guide.What is a Cold Steel Smatchet?A Cold Steel Smatchet is a versatile, lightweight, and handy tool often used for various purposes like camping, hunting, or even self-defense. This unique name comes from the swordsmithing tradition of the same name, originating in Japan, which focuses on crafting blades using hammer forging.Features to Considerhttps://preview.redd.it/zus9kcwa4r1d1.jpg?width=720&format=pjpg&auto=webp&s=c7c2477753bb2dbaaa691bb7293886bc265400f3 Blade TypeThe Cold Steel Smatchet usually features a semi-rigid, slightly flexible blade. This design provides a balance between strength and versatility. Flexibility allows the blade to bend without breaking when applied with force, while the semi-rigidity maintains its structural integrity.Construction MaterialThe Cold Steel Smatchet is typically made from high-quality, durable materials such as stainless steel or carbon steel. Both materials are rust-resistant, which is crucial for longevity and safety. Stainless steel offers better corrosion resistance, while carbon steel is known for its hardness and edge retention.Handle ConstructionThe handle of a Cold Steel Smatchet should be ergonomic and comfortable to grip. Most models feature a handle made from a combination of natural materials like wood or bone and synthetic materials for a secure and comfortable grip. The handle should provide a good balance of weight distribution and ease of handling.Purchasing Considerationshttps://preview.redd.it/q7nkf59b4r1d1.jpg?width=720&format=pjpg&auto=webp&s=ae3d4949635abbc6f025f7c457d4764ec846ce37 Durability and LongevityInvest in a Cold Steel Smatchet that is built with high-quality materials and construction techniques. This will ensure that your tool will last for years and perform reliably, even under demanding conditions.MaintenanceProper maintenance is essential to keep your Cold Steel Smatchet in top condition. Regularly clean and sharpen the blade, check for rust, and ensure the handle remains secure and comfortable to grip.General AdviceSafetyAlways handle the Cold Steel Smatchet with utmost care and respect. Mishandling can result in accidents or injuries. Practice proper techniques when using the tool, and keep it away from children and non-experienced users. https://preview.redd.it/fgycujnb4r1d1.jpg?width=720&format=pjpg&auto=webp&s=f21109260323d230e5e4aee8c298f9f13e4194fe UsageThe Cold Steel Smatchet can be used for various purposes such as cutting, chopping, or even self-defense. Familiarize yourself with the tool's capabilities and limitations before attempting any tasks.StorageStore your Cold Steel Smatchet in a safe, dry, and cool place when not in use. This will help prevent rust and maintain the tool's overall condition.A Cold Steel Smatchet can be a valuable addition to your camping, hunting, or self-defense toolkit. By understanding its essential features, purchasing considerations, and general advice, you can ensure you make the right decision when selecting your Smatchet. FAQWhat is a Cold Steel Smatchet?A Cold Steel Smatchet is a type of weapons that originated in medieval Europe. It is characterized by a short blade and a stout shaft, making it highly effective in close combat situations. Cold Steel offers a modern take on these traditional weapons, with high-quality craftsmanship and materials. https://preview.redd.it/j6rarh5c4r1d1.jpg?width=720&format=pjpg&auto=webp&s=dce396ee4e0afb182b8420b86182b3dd7df853d5 What materials are used to make Cold Steel Smatchets?Cold Steel Smatchets are made from high-carbon steel, ensuring durability and sharpness. The handle can be made of several materials like wood, bone, or synthetic materials for better grip and comfort.What are the different types of Cold Steel Smatchets?
What are the dimensions of a typical Cold Steel Smatchet?The dimensions of a Cold Steel Smatchet may vary depending on the specific model. However, most models come with a blade length of around 15 inches and an overall length of around 25 inches. It is recommended to check the product listing for the exact dimensions of the model you are interested in.How much does a Cold Steel Smatchet cost?The price of a Cold Steel Smatchet can vary depending on the type, material, and design. Training Smatchets usually start at around $40, while Combat Smatchets and Collector's Edition Smatchets can range from $100 to $200 or more.What is the difference between a Cold Steel Smatchet and a Katana?A Cold Steel Smatchet and a Katana are both types of swords, but they differ in terms of design and structure. A Smatchet is a short, stout blade with a long handle, making it well-suited for close combat. A Katana, on the other hand, is a longer, thinner blade with a more slender handle, designed for slashing rather than thrusting.How do I maintain my Cold Steel Smatchet?To maintain your Cold Steel Smatchet, make sure to clean it after use and store it in a dry, cool place. Regularly oil the blade and handle to prevent rust and keep the components in good condition. It is also recommended to sharpen the blade periodically using a sharpening stone.Do Cold Steel Smatchets come with a warranty?Yes, Cold Steel offers a limited lifetime warranty on the materials and craftsmanship of their Smatchets. However, this warranty does not cover accidental damage or normal wear and tear.What is the return policy for Cold Steel Smatchets?Cold Steel has a 30-day return policy for their Smatchets. The product must be in its original, unopened packaging, and the customer is responsible for return shipping costs.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.21 11:47 spikeyfish2 Concrete paving - angle grinder or block cutter?
I’m planning to lay some concrete paving to extend our existing patio. They’re standard ones from a builders merchant - 450x450x36mm.
Initially I was going to buy an angle grinder to make around 20-25 cuts that are needed. All cuts are simple straight cuts, no curves/angles or notches needed. Downside is the amount of dust it generates, and needing a steady hand.
I’ve since come across block cutters that seem to also cut paving slabs. Would these be more suitable? Seems like I can hire one for a similar price to buying an angle grinder. Would it do a betteeasier job going down this route?
TIA
submitted by spikeyfish2 to DIYUK [link] [comments]
Initially I was going to buy an angle grinder to make around 20-25 cuts that are needed. All cuts are simple straight cuts, no curves/angles or notches needed. Downside is the amount of dust it generates, and needing a steady hand.
I’ve since come across block cutters that seem to also cut paving slabs. Would these be more suitable? Seems like I can hire one for a similar price to buying an angle grinder. Would it do a betteeasier job going down this route?
TIA
2024.05.21 11:41 Sweet-Count2557 Babymoon Destinations New York
 | Babymoon Destinations New York submitted by Sweet-Count2557 to worldkidstravel [link] [comments] Looking for the perfect babymoon destination? Look no further than New York! From romantic getaways to luxury resorts, hidden gems in Upstate New York to must-visit spa retreats, and charming bed and breakfasts, there's something for everyone. Whether you're seeking relaxation or adventure, New York has it all. So pack your bags and get ready to unwind in the stunning beauty of the Empire State. Your babymoon awaits! Key Takeaways Romantic getaways in New York offer opportunities for picnics in scenic spots and couples' cooking classes. Top luxury resorts in New York provide impeccable accommodations, world-class amenities, exquisite dining options, and exciting activities. Upstate New York has hidden gems such as outdoor adventures, challenging hiking trails, and kayaking on tranquil lakes. Must-visit spa retreats in New York offer prenatal massages, mineral-rich hot springs, gentle yoga or meditation, and healthy meals for relaxation and self-care during a babymoon. Best Romantic Getaways If you're looking for the best romantic getaways, New York has plenty of options to choose from. Whether you're a nature lover or a food enthusiast, there's something for every couple seeking an intimate escape. One of the most romantic activities you can do is have a picnic in one of New York's picturesque spots. From Central Park with its scenic views and lush greenery to the Brooklyn Botanic Garden with its vibrant flowers, these romantic picnic spots provide the perfect setting for a cozy and memorable time together. For couples who enjoy cooking together, New York offers fantastic couples' cooking classes. These classes not only teach you how to whip up delicious meals but also allow you to bond and create lasting memories as you prepare dishes side by side. You can learn new culinary techniques, explore different cuisines, and savor your creations together. As your appetite for romance grows, so does your craving for luxury. That's why it's time to transition into exploring New York's top luxury resorts, where indulgence meets tranquility. Top Luxury Resorts The top luxury resorts in the area offer couples a lavish and relaxing experience. Whether you're seeking a luxurious beachside getaway or a tranquil mountain retreat, these resorts have it all. Here are four reasons why these destinations should be at the top of your list: Impeccable Accommodations: From spacious suites with breathtaking views to private villas with their own pools, these luxury resorts provide the ultimate in comfort and style. Every detail is carefully curated to ensure your stay is nothing short of extraordinary. World-Class Amenities: Indulge in spa treatments that will leave you feeling rejuvenated and pampered. Take a dip in infinity pools overlooking pristine beaches or enjoy outdoor hot tubs nestled amidst the mountainside. These resorts spare no expense when it comes to providing top-notch amenities. Exquisite Dining Options: Gourmet restaurants featuring award-winning chefs await you at every turn. Experience culinary delights from around the world, paired with fine wines and impeccable service. Each meal is an opportunity to savor unforgettable flavors. Exciting Activities: Whether you prefer lounging on sun-kissed shores or embarking on exhilarating adventures such as hiking, snorkeling, or horseback riding, these luxury resorts offer a wide range of activities for every taste. With their unparalleled beauty and exceptional service, these luxury beach resorts and mountain retreats guarantee an unforgettable babymoon experience filled with relaxation, romance, and tranquility. Safety measures are strictly enforced to ensure peace of mind during your stay. Hidden Gems in Upstate New York Upstate New York is home to some hidden gems that offer a unique and off-the-beaten-path experience. If you're looking for outdoor adventures and scenic hiking trails, this region has plenty to offer. One such hidden gem is the Adirondack Park, boasting over six million acres of pristine wilderness. Here, you can hike through picturesque forests, kayak on tranquil lakes, or even try your hand at rock climbing. For a more challenging hiking experience, head to the Catskill Mountains where you'll find numerous trails with breathtaking views of waterfalls and lush valleys. Safety is always a top priority when embarking on outdoor adventures. Make sure to pack proper gear like sturdy hiking boots, raincoats, and plenty of water. It's also advisable to check weather conditions and trail maps before setting out. As we move into the next section about must-visit spa retreats, keep in mind that after a day filled with outdoor activities, what better way to unwind than by treating yourself to a luxurious spa experience? Upstate New York offers several world-class spa retreats where you can indulge in massages, facials, and other rejuvenating treatments. Soothe your tired muscles and relax your mind as you prepare for the next leg of your babymoon journey. Must-Visit Spa Retreats As we explore the topic of must-visit spa retreats, it's important to prioritize relaxation and self-care during your trip. Taking care of yourself is crucial, especially for expecting parents on a babymoon. Here are some relaxation tips and the best babymoon activities for you to enjoy: Indulge in a prenatal massage: Treat yourself to a soothing and rejuvenating massage specifically designed for expectant mothers. It will help alleviate any pregnancy discomfort and promote overall well-being. Take a dip in the mineral-rich hot springs: Immerse yourself in the healing waters of natural hot springs. Not only will it provide relief for tired muscles, but it can also have many health benefits for both you and your baby. Practice gentle yoga or meditation: Join a prenatal yoga class or find a quiet spot to meditate and connect with your growing baby. These practices can help reduce stress, increase flexibility, and create a sense of calmness. Enjoy healthy meals and snacks: Nourish your body with nutritious foods that support both you and your baby's well-being. Look for restaurants that offer organic options or consider booking accommodations with an on-site chef who specializes in healthy cuisine. Charming Bed and Breakfasts When planning your getaway, consider staying at one of these charming bed and breakfasts for a cozy and personalized experience. Boutique inns offer a unique and intimate atmosphere that will make you feel right at home. These cozy lodgings are the perfect choice for those seeking a safe and comfortable stay. Located in picturesque settings, these bed and breakfasts provide a peaceful retreat from the hustle and bustle of city life. Each room is thoughtfully decorated with antique furnishings, plush linens, and modern amenities to ensure your comfort. Wake up to the smell of freshly brewed coffee and enjoy a delicious homemade breakfast made with locally sourced ingredients. The friendly innkeepers are always ready to assist you with any questions or requests you may have during your stay. They can recommend local attractions, hiking trails, or quaint cafes nearby. You'll feel like part of the family as they share stories about the history of the inn and the surrounding area. In addition to their cozy rooms, many bed and breakfasts offer common areas where guests can relax by the fireplace or unwind on a sunny porch. Some even have gardens where you can stroll through colorful flowers or sit under a shady tree with a good book. For an unforgettable vacation experience, choose one of these charming bed and breakfasts for your next getaway. Safety is their top priority, ensuring peace of mind as you indulge in relaxation and rejuvenation amidst beautiful surroundings. Frequently Asked Questions What Are Some of the Best Activities to Do During a Babymoon in New York? During your babymoon in New York, there are plenty of amazing activities for you to enjoy. From strolling through Central Park and taking in the beautiful scenery to indulging in a relaxing prenatal massage at a luxurious spa, there is something for everyone. Don't forget to explore the vibrant food scene and try some delicious dishes at trendy restaurants. Take this time to relax, bond with your partner, and create beautiful memories before your little one arrives. Are There Any Specific Babymoon Packages or Deals Offered at These Destinations? Are there any specific babymoon packages or deals offered at these destinations? You might be wondering if there are any special deals or packages available for your babymoon in New York. Well, let me assure you that many of the top babymoon destinations in the city offer exclusive packages tailored for expecting couples. These packages often include luxurious accommodations, relaxing spa treatments, romantic dinners, and even prenatal yoga classes. Can You Recommend Any Babymoon-Friendly Restaurants in New York? Looking for babymoon-friendly restaurants in New York? You're in luck! The city has a plethora of great options for expecting couples. From cozy cafes to upscale eateries, you'll find something to satisfy your cravings. And while you're here, don't miss out on the best activities for babymoon in New York. Take a leisurely stroll through Central Park, catch a Broadway show, or indulge in some retail therapy on Fifth Avenue. There's no shortage of things to do during your babymoon in the Big Apple! What Are Some Safety Tips or Precautions to Consider When Traveling on a Babymoon? When traveling on a babymoon, safety should be your top priority. Consider these precautions to ensure a smooth trip. First, consult with your healthcare provider for any restrictions or guidelines specific to your pregnancy. Pack essentials like comfortable shoes, snacks, and water to stay hydrated. Choose a destination with accessible medical facilities nearby. Avoid strenuous activities and opt for gentle exercises instead. Lastly, research local transportation options and check for any travel advisories in advance. Are There Any Specific Amenities or Services That Are Commonly Offered for Expecting Parents at These Destinations? When traveling on a babymoon, it's important to know what amenities or services are commonly offered for expecting parents at popular destinations in New York. These can include: Luxurious accommodations with extra comfort and spaciousness Special packages tailored for couples preparing for parenthood Spa treatments designed specifically for pregnant women Access to prenatal yoga classes or workshops Before you embark on your babymoon in New York, make sure to pack essential items like comfortable clothing, toiletries, and any necessary medical documents. Conclusion Congratulations on reaching the end of this article! Now that you've explored the best babymoon destinations in New York, it's time to embark on your own romantic adventure. From luxurious resorts to hidden gems in upstate New York, there is something for every couple seeking relaxation and tranquility. Soothe your senses at must-visit spa retreats or indulge in the charm of cozy bed and breakfasts. Let these experiences be the perfect prelude to your journey into parenthood, like a gentle breeze guiding you towards an unforgettable babymoon escape. |
2024.05.21 11:03 HeLiBeB New Voices Book Club: Vote for our June read!
Welcome to the book club New Voices! In this book club we want to highlight books by debut authors and open the stage for under-represented and under-appreciated writers from all walks of life. New voices refers to the authors as well as the protagonists, and the goal is to include viewpoints away from the standard and most common. For more information and a short description of how we plan to run this club and how you can participate, please have a look at the announcement post.
It's time for second chances! I've selected a few books from previous polls, that didn't quite make it and deserve a second chance:
Do you like the selection? Have you already read one of the books and want to recommend it to others? Do you know any additional Bingo squares for any of the books? Let us know your thoughts in the comments below.
submitted by HeLiBeB to Fantasy [link] [comments]
It's time for second chances! I've selected a few books from previous polls, that didn't quite make it and deserve a second chance:
Under Fortunate Stars by Ren Hutchings
Fleeing the final days of the generations-long war with the alien Felen, smuggler Jereth Keeven's freighter the Jonah breaks down in a strange rift in deep space, with little chance of rescue—until they encounter the research vessel Gallion, which claims to be from 152 years in the future. The Gallion's chief engineer Uma Ozakka has always been fascinated with the past, especially the tale of the Fortunate Five, who ended the war with the Felen. When the Gallion rescues a run-down junk freighter, Ozakka is shocked to recognize the Five's legendary ship—and the Five's famed leader, Eldric Leesongronski, among the crew. But nothing else about Leesongronski and his crewmates seems to match up with the historical record. With their ships running out of power in the rift, more than the lives of both crews may be at stake.Bingo squares: book club
The Magic Fish by Trung Le Nguyen
The book tells an intergenerational story of a mother and son struggling to relate to each other—the mother an immigrant to the United States who wants to make a home for her family in an unfamiliar country; the son trying to figure out the best way to come out to his parents. Through telling each other fairy tales, they're able to find common ground.Bingo squares: bookclub
Bacchanal by Veronica Henry
Evil lives in a traveling carnival roaming the Depression-era South. But the carnival’s newest act, a peculiar young woman with latent magical powers, may hold the key to defeating it. Her time has come. Abandoned by her family, alone on the wrong side of the color line with little to call her own, Eliza Meeks is coming to terms with what she does have. It’s a gift for communicating with animals. To some, she’s a magical tender. To others, a she-devil. To a talent prospector, she’s a crowd-drawing oddity. And the Bacchanal Carnival is Eliza’s ticket out of the swamp trap of Baton Rouge. Among fortune-tellers, carnies, barkers, and folks even stranger than herself, Eliza finds a new home. But the Bacchanal is no ordinary carnival. An ancient demon has a home there too. She hides behind an iridescent disguise. She feeds on innocent souls. And she’s met her match in Eliza, who’s only beginning to understand the purpose of her own burgeoning powers. Only then can Eliza save her friends, find her family, and fight the sway of a primordial demon preying upon the human world. Rolling across a consuming dust bowl landscape, Eliza may have found her destiny.Bingo squares: bookclub
The Hacienda by Isabel Cañas
Mexican Gothic meets Rebecca in this debut supernatural suspense novel, set in the aftermath of the Mexican War of Independence, about a remote house, a sinister haunting, and the woman pulled into their clutches...Bingo squares: bookclub
In the overthrow of the Mexican government, Beatriz’s father is executed and her home destroyed. When handsome Don Rodolfo Solórzano proposes, Beatriz ignores the rumors surrounding his first wife’s sudden demise, choosing instead to seize the security his estate in the countryside provides. She will have her own home again, no matter the cost.
But Hacienda San Isidro is not the sanctuary she imagined.
When Rodolfo returns to work in the capital, visions and voices invade Beatriz’s sleep. The weight of invisible eyes follows her every move. Rodolfo’s sister, Juana, scoffs at Beatriz’s fears—but why does she refuse to enter the house at night? Why does the cook burn copal incense at the edge of the kitchen and mark its doorway with strange symbols? What really happened to the first Doña Solórzano?
Beatriz only knows two things for certain: Something is wrong with the hacienda. And no one there will help her.
Desperate for help, she clings to the young priest, Padre Andrés, as an ally. No ordinary priest, Andrés will have to rely on his skills as a witch to fight off the malevolent presence haunting the hacienda and protect the woman for whom he feels a powerful, forbidden attraction. But even he might not be enough to battle the darkness.
Far from a refuge, San Isidro may be Beatriz’s doom.
The Heretic‘s Guide to Homecoming by Sienna Tristen
WINNER OF THE 2019 READERVIEWS AWARD FOR FANTASY! WINNER OF THE 2019 IPPY AWARD FOR FANTASY!Bingo squares: bookclub
“Life is transformation. You change or you die.”
Ashamed of his past and overwhelmed by his future, Ronoah Genoveffa Elizzi-denna Pilanovani feels too small for his own name. After a graceless exit from his homeland in the Acharrioni desert, his anxiety has sabotaged every attempt at redemption. Asides from a fiery devotion to his godling, the one piece of home he brought with him, he has nothing.
That is, until he meets Reilin. Beguiling, bewildering Reilin, who whisks Ronoah up into a cross-continental pilgrimage to the most sacred place on the planet. The people they encounter on the way—children of the sea, a priestess and her band of storytellers, the lonely ghosts of monsters—are grim and whimsical in equal measure. Each has their part to play in rewriting Ronoah’s personal narrative.
One part fantasy travelogue, one part emotional underworld journey, The Heretic’s Guide to Homecoming is a sumptuous, slow-burning story about stories and the way they shape our lives.
Do you like the selection? Have you already read one of the books and want to recommend it to others? Do you know any additional Bingo squares for any of the books? Let us know your thoughts in the comments below.
Click here to vote
Voting will run until May 27 and the winner will be announced on May 282024.05.21 10:24 irregular-moon Slow release meds and lifestyle changes
I've been settled on Elvanse 50mg for a couple of years, it's revolutionised my life and i don't get any side effects anymore. But i've consistently found, for the last 18 months or so, that my executive dysfunction and procrastination on non-work tasks (organising my life, making plans, replying to friend's messages, booking appointments, etc) is greatly improved but only for the first 45 minutes after my meds have kicked in. After that, I can focus on work tasks, etc but my ability to overcome the activation energy of those more menial tasks drops to unmedicated levels again.
I used to use my long commute to work to just get all my stuff done but since I've recently changed jobs to one with an active commute (1 hr+ driving instead of 1.5hr public transport), i'm losing that precious time to driving and really noticing a negative effect in my life (unread/unreplied messages from friends are piling up, appointments take me months to book, etc).
I assume that i'm getting a larger initial dose when the capsule is first broken down and the drug metabolised, and this is then tapering down to a more consistent, lower dose throughout the day. Increasing my dose to 60mg hasn't improved this though and my psych doesn't seem to have many answers.
So, considering i'm not exactly leading the best lifestyle for adhd medication efficacy (take my meds at 5/6am on an empty stomach, exist on 1 cup of coffee and a homemade protein smoothie until late in the afternoon, crash at 2pm, etc) i'm wondering if anyone, anecdotally, has experienced a similar thing and managed to find a way to get this effect to last longer throughout the day through lifestyle changes?
Also while i'm here, anyone been on prozac (fluoxetine) or Duloxetine (Cymbalta) and experienced feeling like it significantly counteracted their adhd meds? I've found research papers that indicate is is known that production of Serotonin inhibits production of Dopamine (definitely overly simplified since i am not a biologist or medical doctor) but my psych seems flummoxed so i'm wondering if this is just a me issue or if anyone else finds SSRIs and SNRIs make them feel dopamine starved?
submitted by irregular-moon to ADHDUK [link] [comments]
I used to use my long commute to work to just get all my stuff done but since I've recently changed jobs to one with an active commute (1 hr+ driving instead of 1.5hr public transport), i'm losing that precious time to driving and really noticing a negative effect in my life (unread/unreplied messages from friends are piling up, appointments take me months to book, etc).
I assume that i'm getting a larger initial dose when the capsule is first broken down and the drug metabolised, and this is then tapering down to a more consistent, lower dose throughout the day. Increasing my dose to 60mg hasn't improved this though and my psych doesn't seem to have many answers.
So, considering i'm not exactly leading the best lifestyle for adhd medication efficacy (take my meds at 5/6am on an empty stomach, exist on 1 cup of coffee and a homemade protein smoothie until late in the afternoon, crash at 2pm, etc) i'm wondering if anyone, anecdotally, has experienced a similar thing and managed to find a way to get this effect to last longer throughout the day through lifestyle changes?
Also while i'm here, anyone been on prozac (fluoxetine) or Duloxetine (Cymbalta) and experienced feeling like it significantly counteracted their adhd meds? I've found research papers that indicate is is known that production of Serotonin inhibits production of Dopamine (definitely overly simplified since i am not a biologist or medical doctor) but my psych seems flummoxed so i'm wondering if this is just a me issue or if anyone else finds SSRIs and SNRIs make them feel dopamine starved?
2024.05.21 10:21 Pumamick My [m31] partner [f25] constantly tells me that I'm not doing enough. Does she have a point?
Hi guys,
I [31m] feel like my partner [25f] is constantly on my case about not doing enough, or not giving enough.
I had a pretty shit start to life which meant that i started off on the backfoot, however I managed to graduate a MSc Computer Science last December and I have been looking for a graduate job ever since. I've had numerous video interviews, but I've been rejected by all except one place that has invited me to an assessment center in June.
About 6 weeks ago I applied for two companies that I really like the look of. One in defence and one in maritime services. Both looked like amazing opportunities and I was lucky enough to be invited to an interview for both. It was nice to finally have companies call me back, you know? Anyway, I had my interviews and prepared for them both as best I could. I felt like the interviews went very well, but unfortunately I got rejected by both companies on the same day last week.
I'll be honest, it broke me. I was really, really upset about it and began to feel completely hopeless, useless and defeated. I worked so hard to get educated, did the best that I could, got very high grades, but it feels like it has all been a waste of time.
I cried like a baby when I got those rejections and felt absolutely broken. My partner supported me through it and said to me "it isn't your fault" and that it's just a shit economy at the moment.
Fast forward to this week and my partner calls me (she's away visiting her parents). It started off fine at first as we were both talking about plans for the future. Basically, the conversation spiralled and she started saying that I'm not doing enough, that's its a males job to provide financially and that I'm not trying hard enough to get us ahead. I showed her this spread sheet I've kept that lists every single job I've applied for and what stage of the application I made it to. There are 128 jobs on that list. I felt so hurt because when I was super upset about my rejections last week, she supported me and told me none if it was my fault. Yet here she is insinuating that it is. I point this apparent hypocrisy out to her, and she says "it's always partially your fault".
I've applied to every single job available in this area and city a couple of hours away. Then she said that I don't work enough currently (I'm a healthcare worker). I remind her that I work 3x 12.5hr shifts per week which is about the limit of which I can handle tbh. I'm wiping ass and coping abuse all day, it isn't easy.
She then rebutted me by saying "what about last year when you were only working 2 shifts per week". Wtf, I was studying a Masters degree so of course I was working less. And during my dissertation I was studying roughly 6-8 hours. In my view, doing a MSc full time during the week and working 12 hours on Saturday and Sunday is commendable, and I was the only student in my cohort who worked as much as I did. Most just lived off their student loan. Yet here I am, being made to feel like I was a lazy pos. I feel like she had absolutely no appreciation for just how hard i worked tbh.
when I asked her "what would you do differently in my shoes?" She was unable to answer. Crickets. I would have expected her to be able to list exactly where she could see room for improvement, but nope. Then she brought up how I don't "contribute enough to the household financially or with chores". She makes this argument from time to time and it infuriates me. I pay more than 50% of our bills and more than 50% for groceries. I effectively bought a car for her to use almost exclusively (every day drives to her uni, or work, or her stables). She has possession of the car around 95% of the time, yet I've been paying atleast 70% of the running costs of it (and boy did the thing need some work over the last 2 years). But she completely disregards that because it doesn't contribute to our standard of living. Whatever the fuck that even means.
So I say to her, what about all the trips I've taken you on? Last year I took her to Australia, I paid for everything. She said "that doesn't count because it was to see your family". I then said how about me taking you to Greece the year before last? Or me taking you to Sweden, Denmark, Germany, Switzerland and Italy on a road trip the year before that?
Do you know what her response was? "You see I don't like when you pay for these holidays because you always end up using them against me". WTF! She literally complained that I don't contribute enough financially! Ugh what is this logic even?
Then she moves on and says I dont do enough chores. I bought this hook line and sinker when we first got together, but I've really stepped up my game in the last two years. I pointed out that I prepare us meals, I vacuum, I do dishes, walk the dogs, dust, put my shit away, keep the mirror clean, you name it. She always has a clean flat to come home to.
But she says "it's not to my standard so I don't consider it done". Wtf? Absolute bs, I pay far closer attention to detail that she does. I do a very thorough job.
Basically, my partner makes absurd criticisms of me that I do not think have any basis in reality. How should I handle this? Because I do love her, but I'm really finding this aspect of her personality very jarring, unfair and difficult to deal with.
Also, sorry for the huge essay. I really needed to vent tbh.
submitted by Pumamick to relationship_advice [link] [comments]
I [31m] feel like my partner [25f] is constantly on my case about not doing enough, or not giving enough.
I had a pretty shit start to life which meant that i started off on the backfoot, however I managed to graduate a MSc Computer Science last December and I have been looking for a graduate job ever since. I've had numerous video interviews, but I've been rejected by all except one place that has invited me to an assessment center in June.
About 6 weeks ago I applied for two companies that I really like the look of. One in defence and one in maritime services. Both looked like amazing opportunities and I was lucky enough to be invited to an interview for both. It was nice to finally have companies call me back, you know? Anyway, I had my interviews and prepared for them both as best I could. I felt like the interviews went very well, but unfortunately I got rejected by both companies on the same day last week.
I'll be honest, it broke me. I was really, really upset about it and began to feel completely hopeless, useless and defeated. I worked so hard to get educated, did the best that I could, got very high grades, but it feels like it has all been a waste of time.
I cried like a baby when I got those rejections and felt absolutely broken. My partner supported me through it and said to me "it isn't your fault" and that it's just a shit economy at the moment.
Fast forward to this week and my partner calls me (she's away visiting her parents). It started off fine at first as we were both talking about plans for the future. Basically, the conversation spiralled and she started saying that I'm not doing enough, that's its a males job to provide financially and that I'm not trying hard enough to get us ahead. I showed her this spread sheet I've kept that lists every single job I've applied for and what stage of the application I made it to. There are 128 jobs on that list. I felt so hurt because when I was super upset about my rejections last week, she supported me and told me none if it was my fault. Yet here she is insinuating that it is. I point this apparent hypocrisy out to her, and she says "it's always partially your fault".
I've applied to every single job available in this area and city a couple of hours away. Then she said that I don't work enough currently (I'm a healthcare worker). I remind her that I work 3x 12.5hr shifts per week which is about the limit of which I can handle tbh. I'm wiping ass and coping abuse all day, it isn't easy.
She then rebutted me by saying "what about last year when you were only working 2 shifts per week". Wtf, I was studying a Masters degree so of course I was working less. And during my dissertation I was studying roughly 6-8 hours. In my view, doing a MSc full time during the week and working 12 hours on Saturday and Sunday is commendable, and I was the only student in my cohort who worked as much as I did. Most just lived off their student loan. Yet here I am, being made to feel like I was a lazy pos. I feel like she had absolutely no appreciation for just how hard i worked tbh.
when I asked her "what would you do differently in my shoes?" She was unable to answer. Crickets. I would have expected her to be able to list exactly where she could see room for improvement, but nope. Then she brought up how I don't "contribute enough to the household financially or with chores". She makes this argument from time to time and it infuriates me. I pay more than 50% of our bills and more than 50% for groceries. I effectively bought a car for her to use almost exclusively (every day drives to her uni, or work, or her stables). She has possession of the car around 95% of the time, yet I've been paying atleast 70% of the running costs of it (and boy did the thing need some work over the last 2 years). But she completely disregards that because it doesn't contribute to our standard of living. Whatever the fuck that even means.
So I say to her, what about all the trips I've taken you on? Last year I took her to Australia, I paid for everything. She said "that doesn't count because it was to see your family". I then said how about me taking you to Greece the year before last? Or me taking you to Sweden, Denmark, Germany, Switzerland and Italy on a road trip the year before that?
Do you know what her response was? "You see I don't like when you pay for these holidays because you always end up using them against me". WTF! She literally complained that I don't contribute enough financially! Ugh what is this logic even?
Then she moves on and says I dont do enough chores. I bought this hook line and sinker when we first got together, but I've really stepped up my game in the last two years. I pointed out that I prepare us meals, I vacuum, I do dishes, walk the dogs, dust, put my shit away, keep the mirror clean, you name it. She always has a clean flat to come home to.
But she says "it's not to my standard so I don't consider it done". Wtf? Absolute bs, I pay far closer attention to detail that she does. I do a very thorough job.
Basically, my partner makes absurd criticisms of me that I do not think have any basis in reality. How should I handle this? Because I do love her, but I'm really finding this aspect of her personality very jarring, unfair and difficult to deal with.
Also, sorry for the huge essay. I really needed to vent tbh.
2024.05.21 10:01 ConsequenceSure3063 Best Cold Steel Revolver
 | submitted by ConsequenceSure3063 to u/ConsequenceSure3063 [link] [comments] https://preview.redd.it/2s44rr58kq1d1.jpg?width=720&format=pjpg&auto=webp&s=d043e907ffe7feed01147cbcc183c8ec87613204 Get ready to explore some of the hottest new products on the market! In this roundup, we'll be diving into the world of the Cold Steel Revolver. Packed with powerful features and innovative designs, these products are sure to make a splash. Whether you're a tech enthusiast or simply looking for the latest and greatest in consumer goods, you won't want to miss this exciting article! The Top 14 Best Cold Steel Revolver
Reviews🔗World War I and II Era 1911 Webley Revolver Replicahttps://preview.redd.it/08do7mt8kq1d1.jpg?width=720&format=pjpg&auto=webp&s=5f5e2e11c48bdfaeda4468ae54b40d161996708b As a history buff, I was drawn to the Denix Webley Revolver replica, with its ties to the Indiana Jones movies. The first thing that struck me was its weight, which made it feel like a real gun. The details were incredibly accurate, right down to the checkered grip and the engraving on the barrel. However, I found it a bit disappointing that the break-open action didn't work. It may be a minor issue for some, but for me, it took away a bit of the authenticity. Nevertheless, it's a great display piece and does justice to its historical origins. 🔗1851 Navy Revolver: A Reliable and Handsome Sidearm for Gunfightershttps://preview.redd.it/4go1my59kq1d1.jpg?width=720&format=pjpg&auto=webp&s=28c7506795c59a3a51fb4017acb8028da750acc1 This antique beauty, the Polished Gold and Nickel M1851 Navy Revolver by Medieval Collectibles, is a sight to behold. The intricate details on this 4-barrel pistol bring it to life, transporting you back to the Civil War era, and even beyond. The 7.5-inch barrel, with its octagonal design, has a timeless charm that's impossible to ignore. The solid frame exudes confidence and strength, much like the times it was used. At 13 inches in total length and a weight of 2.3 lbs. , it's a well-balanced sidearm for gun enthusiasts. However, there are a few areas that might require attention. Some users have reported loose moving parts and issues with the plating, which could affect its overall durability. Additionally, there's been mention of sharp edges and misaligned fittings, which might not be ideal for those handling this piece. Despite these setbacks, the M1851 Navy Revolver remains a coveted collectible. With the right care, it could become a prized possession, adding an element of history to your collection. 🔗Denix 1106N 1873 Old West Revolver .45 - 12.25 Inch Metal Barrel with Wood Gripshttps://preview.redd.it/qioj11m9kq1d1.jpg?width=720&format=pjpg&auto=webp&s=edd9aa1b35d2b8eebc4eb6cdc562852fce43d88c I was pleasantly surprised by this 1873 Old West Revolver from Denix, it felt tough and well-constructed. The 5.5 inch black cast metal barrel and trigger give it a solid, weighted feel, while the genuine wood grips lent a touch of authenticity. In my daily life, it served as a perfect replica for a western-themed event and even in my holster, it looked great. However, I did notice that the action of the trigger wasn't as smooth as it could be, but overall, this was a good purchase. 🔗Authentic Western Revolver with Gallery Stand (Metal Frame, 13-inch Overall)https://preview.redd.it/xnfifxx9kq1d1.jpg?width=720&format=pjpg&auto=webp&s=4cc35c003453cfaeb4fda21ea1a01e1fc1799a2d I've been using this decorative western-style navy revolver with a flint mechanism in my study, and it's quite a conversation starter. The ornate engravings on the barrel have made it a standout piece, drawing attention from my friends and family. The revolver's silver finish adds a touch of elegance to my space, making it a unique addition to my decor. One thing I should mention, though, is the size. With an overall length of 13 inches, it takes up some room on my desk. It might be a bit too large for those with smaller studies, but it fits nicely in mine. The display stand provided is also quite handsome, complementing the revolver's design perfectly. Overall, I'd highly recommend this decorative piece to anyone looking for a standout addition to their study or office. 🔗Nickel-Finished 4-Barrel Non-Firing Revolver Replicahttps://preview.redd.it/jxxif3bakq1d1.jpg?width=720&format=pjpg&auto=webp&s=80bf5d7a949610578258166a18317218b5873fa5 The Denix CA Classic M1851 Navy Revolver, Nickel, is a replica that truly captures the essence of the original. This non-firing piece of artistry perfectly mimics the iconic revolver, with its nickel-finished metal barrel and imitation ivory grips. The simulated firing mechanism, rotating barrel, and overall design make it a showstopper, reminding me of classic Western movies. Despite its impressive appearance, the replica weighs in at a mere 2.3 lbs, making it an easy piece to handle and carry around with pride. However, one downside I've noticed is the overall length, which measures at 13 inches, making storage a bit of a challenge – but it's a small price to pay for such an authentic and beautiful replica. 🔗Historic 4-Barrel Pistol Replica by Denixhttps://preview.redd.it/tcfbh6kekq1d1.jpg?width=720&format=pjpg&auto=webp&s=5f6fda763eb759caafc51b7eaa330a525d438f7b As a fan of Civil War reenacting, the Denix 1849 Wells Fargo Revolver has been a game-changer for me. Its realistic look and feel are top-notch, making it an excellent addition to my outfit, giving it that authentic touch. The black metal and nickel body, with its wood grips, is a delight to hold and adds a sense of weight to it - a detail that's hard to find in other replicas. However, I've also experienced some minor downsides, like the non-firing replica being the only type available. But overall, I'm thrilled with my purchase, and it has become a favorite in my collection. 🔗Nickel Finish Smith and Wesson 1869 Army Revolver Replicahttps://preview.redd.it/egr5fpyekq1d1.jpg?width=720&format=pjpg&auto=webp&s=79eb49beb7c8fe2ae170a3c37b926897634afadd As someone who's always been fascinated by the era of the Old West, I couldn't resist trying out this non-firing replica of the 1869 Army Revolver. Featuring a sleek nickel silver finish, this replica brought me back to the iconic "Cowboy" days. Handling the replica felt like holding a piece of history, with the original's "single action" and "top break" mechanisms. It even had the added bonus of being a non-firing model, which meant I didn't have to worry about accidentally accidentally discharging it. However, the size and weight of the replica were a bit more challenging to deal with, given that it's a faithful replica of the original. Despite this, I appreciated the fact that it gave me a better understanding of the real gun without the need to purchase one. All in all, the Denix 1869 Army Revolver replica is a solid choice for anyone looking to step into the boots of a "Cowboy" in the Old West. Just be prepared to handle its size and weight! 🔗Authentic 1860 Civil War Revolver Replica for Display and Roleplayhttps://preview.redd.it/bp7wlfbfkq1d1.jpg?width=720&format=pjpg&auto=webp&s=8a3efbba9331edff288cc804aca89a45e7516a78 This Denix replica of the Civil War M1860 Revolver has been a fascinating addition to my collection. It's a fun and affordable way to appreciate the rich history of firearms while staying in compliance with safety regulations. The nickel finish metal construction with wood grips is a lovely touch, not to mention the realistic weight that really helps complete the illusion. With its simulated mechanism of firing and loading, it's like handling the genuine article - just without the risk of accidentally discharging it. However, there's one thing I wish they had addressed. The replica does make a bit of noise and rattle when shaken, which can be a bit bothersome. Overall, I've found this non-firing replica to be a thrilling and authentic-feeling prop that any history or firearms enthusiast would enjoy. 🔗Authentic 45 Peacemaker Replica Revolver by Denixhttps://preview.redd.it/0j0fjqofkq1d1.jpg?width=720&format=pjpg&auto=webp&s=e77ed396defd0efe2047d70a5f4d1b185d6d2137 I recently added the Denix 0.45 Army Revolver Engraved Brass FD1280L to my collection, and it's been a fantastic addition. This non-firing replica, featuring a gold patina finish and a wooden grip, brings the 45 Peacemaker look to life. I'm impressed with its weight and the realistic feel it provides—almost like I'm holding a piece of history. The engraving on this magnificent replica adds to its allure, making it a beautiful conversation starter. As a collector, I appreciate the authentic details—from the barrel length of 3.875 inches to the gold patina finish. The wooden grip not only enhances its aesthetic value but also makes it feel like a genuine piece from the past. One thing to note, some users have mentioned they would have liked a red tip at the end of the barrel, like on the real 1873 Single-Action Army Revolver. However, this does not seem to be a deal-breaker as the majority of reviews praise its realism and quality. Overall, I highly recommend the Denix 0.45 Army Revolver Engraved Brass FD1280L to anyone who loves history and wants a realistic replica in their hands. 🔗Giclee Canvas Artwork with Premium Epson Inkshttps://preview.redd.it/kxxzl05gkq1d1.jpg?width=720&format=pjpg&auto=webp&s=387bb1a4dc10653f9b2e0ca22d08aead82fbe795 I recently fell in love with the iCanvas Midtown Moonlight by Emma Bell Canvas Print. This stunning piece is a true testament to the beauty of fine-art paintings, offering a texture and feel that's second to none. What really sets this print apart is the use of professionally hand-stretched Premium Epson Inks, which have proven to be vivid, fade-resistant, and water-resistant—perfect for any living space! One of my favorite aspects of this print is that it's ready to hang straight out of the box with no assembly needed. It even includes hanging accessories, making installation a breeze. With a 26x40 deep frame in 1.5" thickness, this canvas print has a premium quality that's both visually stunning and durable. Having this iCanvas Midtown Moonlight on display has brought a sense of calm and wonder to my living space, and I'm grateful for the craftsmanship and care put into creating it. 🔗Authentic Nickel-Finished M1849 Dragoon Revolver Replicahttps://preview.redd.it/ny2wrlhgkq1d1.jpg?width=720&format=pjpg&auto=webp&s=6dbc4004a46104c8a24e4c13020909e6aa5042c0 As a history enthusiast, I was thrilled to add the Denix M1849 Dragoon Revolver (DX1055G) to my collection of antique replicas. The overall aesthetic of this piece is simply stunning, with its antique nickel finish and rich brown wood grips. Handling this replica feels quite authentic, thanks to Denix's attention to detail in recreating the feel of a genuine revolver. However, it's important for collectors to remember that while the locks on these replicas are mechanically functional, they are completely safe and non-fireable, requiring no federal license to buy or sell. One of the most impressive aspects of this replica is its accuracy in capturing the historical design of the M1849 Dragoon Revolver. From its 14 1/4" overall length to its 4 3/4" barrel, every element has been meticulously crafted to ensure an accurate representation of the original firearm. While some may argue that this replica is slightly more expensive than others on the market, I believe the high-quality craftsmanship and historical accuracy make it well worth the investment. Overall, the DX1055G Denix M1849 Dragoon Revolver is a stunning addition to any antique weapon collection. 🔗Realistic 19th Century Smith & Wesson Revolver Replica with Antique Blue Finishhttps://preview.redd.it/d3jk3pvgkq1d1.jpg?width=720&format=pjpg&auto=webp&s=c612bd18023da80f64ad25b9944b387d29f7e618 I recently added the Denix Replicas 1008L to my collection, and let me tell you, it's quite the impressive addition. The brass and blue finish blend beautifully, capturing the essence of the original Smith and Wesson "First Model American" Army Revolver. It's interesting to see how the hinged frame and automatic ejection system were pivotal in the evolution of firearms. Despite its antique charm, the replica still brings a sense of realism with its single action mechanism and top break loading design. The wood grips add a touch of refinement to the overall design. However, using it brought to light a minor flaw – the wood grip's durability. In my experience, the grip began to show signs of wear, which was a bit of a letdown. Overall, the Denix Replicas 1008L is a delightful addition to any collection, and it serves as a great reminder of the technological advancements made in the field of firearms. Despite its minor flaw, the replica still holds a special place in my heart. 🔗High-Quality, Realistic Training Revolver for Martial Arts and Defensehttps://preview.redd.it/k4j3a68hkq1d1.jpg?width=720&format=pjpg&auto=webp&s=608d0e5b2435b23458d7d52e2ead443aa0f56d0b Using the Cold Steel Ruger Super Redhawk Rubber Training Revolver has been quite an experience. This training revolver stands out with its lime green color, making it perfect for anyone looking to train safely without the fear of accidentally shooting someone. The thickness of 1.88 inches and the overall length of 13 inches provide a realistic feel when practicing drawing techniques from the holster or disarming moves in close quarter situations. The polymer material makes it sturdy enough for rigorous training without being too harsh, thanks to the softness that allows for safe hand-to-hand striking. However, it's essential to note that the barrel might have a bit of give and could bend a little under pressure, which could raise some concerns for serious martial artists or defense trainers. Nonetheless, this Cold Steel Ruger Super Redhawk Revolver is a reliable training partner, especially considering its affordable price and the fact that it's modeled after one of America's popular pistols, offering a practical yet cost-effective solution for gun enthusiasts or martial arts professionals. 🔗Realistic Navy Engraved Civil War Revolver Pistol Replicahttps://preview.redd.it/5e6qfvohkq1d1.jpg?width=720&format=pjpg&auto=webp&s=2e1afd73f2d53cd538b017ce82179f302174fa96 I recently had the pleasure of using the DENIX Navy Engraved Civil War Revolver Pistol Replica in my daily life and I must say, it was quite an experience. The stunning Navy Blue color of the gun immediately caught my attention, and the intricate engravings on the barrel made it look like a piece of art. One of the features that stood out to me was the wood grips. They not only added to the overall aesthetic of the pistol, but also provided a comfortable grip that made it easy to hold and handle. The 13-inch overall length of the replica was just the right size for displaying and admiring it. However, the replica did have some limitations, such as the fact that it is non-functional and intended only for collection and decoration. This might be a letdown for those looking for a fully realistic or firing replica. Additionally, the mechanics of the locks on the replica firearms are completely safe, but the unrealistic use of purchasing and possessing it should be double-checked in your local area. Despite the minor drawbacks, the DENIX Navy Engraved Civil War Revolver Pistol Replica is a beautiful and reliable addition to any collection, and it certainly turned heads when I displayed it in my home. Buyer's GuideWhen it comes to purchasing a Cold Steel Revolver, there are several factors you need to consider to ensure you get the best product for your needs. Here's a comprehensive buyer's guide to help you make an informed decision.Materials and Build QualityThe materials and build quality of a Cold Steel Revolver are crucial factors to consider, as they directly affect the revolver's durability and performance. Look for revolvers made from high-quality materials like stainless steel or zinc-alloy, which are more resistant to corrosion and provide better strength and longevity. https://preview.redd.it/bnth6i3ikq1d1.jpg?width=720&format=pjpg&auto=webp&s=aa7a351f81171bac5d1d0399ade3e3bdb887de6d Size and WeightConsider the size and weight of the Cold Steel Revolver based on your intended use. If you plan to carry the revolver for self-defense, a compact and lightweight design is more suitable. Conversely, if you need a larger caliber for hunting or professional use, a heavier and more robust model is recommended.Concealed Carry FeaturesIf you plan to use the Cold Steel Revolver for self-defense purposes, look for revolvers with concealed carry features, such as a built-in guard, short barrel, or slim profile. These features help to keep the revolver hidden and easily accessible when needed.Safety FeaturesSafety is a critical aspect when choosing a Cold Steel Revolver. Look for models with built-in safety features, such as a transfer bar or hammer block, to prevent accidental discharges. Additionally, consider models with manual safeties, like a trigger guard or grip safety, for added security. https://preview.redd.it/7qeq33jikq1d1.jpg?width=720&format=pjpg&auto=webp&s=ad226d53d35e9410bd799ea55155c57ffec66c35 Ammunition CompatibilityDifferent Cold Steel Revolvers are designed to work with different types of ammunition. Make sure the revolver you choose is compatible with the type of ammunition you plan to use, such as self-defense or hunting rounds.Price and BudgetFinally, consider your budget when purchasing a Cold Steel Revolver. While higher-priced models may offer advanced features and better build quality, there are still quality options available at a more affordable price. Determine what features are most important to you and find a revolver that fits within your budget.When shopping for a Cold Steel Revolver, keep these factors in mind to ensure you find the best product for your needs. Happy shopping! FAQhttps://preview.redd.it/nejtdpyikq1d1.jpg?width=720&format=pjpg&auto=webp&s=7a1a47854f0b331c2dce7f778104699a761a6577 What is the Cold Steel Revolver?The Cold Steel Revolver is a popular self-defense tool designed for individuals who want to carry a reliable and powerful tool for personal protection. It is a compact and easy-to-carry device that can be used in various self-defense scenarios.How does the Cold Steel Revolver work?The Cold Steel Revolver operates by using a spring-loaded mechanism that quickly deploys a sharp, pointed spike when the user pulls the trigger. The spike is retracted once the trigger is released, making it safe to carry without accidentally deploying the spike.What materials is the Cold Steel Revolver made of?
https://preview.redd.it/3x6veojjkq1d1.jpg?width=720&format=pjpg&auto=webp&s=e9841642adb1dd24c41f1098882fa105ebf141c2 What is the Cold Steel Revolver's size and weight?The Cold Steel Revolver is a compact self-defense tool, measuring approximately 4.25 inches in length, 0.75 inches in width, and 0.95 inches in height. It weighs around 2.2 ounces, making it easy to carry and conceal.How easy is it to use the Cold Steel Revolver?The Cold Steel Revolver is designed to be user-friendly, easy to understand, and intuitive to operate. Once the user pulls the trigger, the spring-loaded mechanism quickly deploys a sharp spike for self-defense. The spike is retracted automatically once the trigger is released, making it easy to use and carry without accidents.Are there different models of the Cold Steel Revolver?Yes, there are several models of the Cold Steel Revolver available, each offering unique features and specifications. Some popular models include the Cold Steel Revolver Pocket, Cold Steel Revolver Pro, and Cold Steel Revolver 2.0.What is the Cold Steel Revolver's warranty?The Cold Steel Revolver comes with a limited lifetime warranty. If there are any defects in materials or workmanship, Cold Steel will repair or replace the product at no additional cost to the customer.Can the Cold Steel Revolver be used as a keychain?Yes, the Cold Steel Revolver can be used as a keychain. Some models, such as the Cold Steel Revolver Pocket, come with a built-in lanyard hole, allowing the user to conveniently attach it to their keychain or belt loop. This provides an easy-to-access self-defense tool while ensuring that the device remains securely attached.What precautions should I take when using the Cold Steel Revolver?
How should I clean and maintain the Cold Steel Revolver?To ensure the longevity of the Cold Steel Revolver, it should be cleaned and maintained regularly. Wipe the device with a clean, damp cloth after each use to remove any dirt or debris. For more thorough cleaning, use a mild soap and warm water solution, and gently scrub the stainless steel surface and rubber grip with a soft-bristled brush or cloth. Always dry the device completely before storing it away to prevent rust or damage.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.21 09:20 Swimming-Most-6756 DIRTY, moldy, room with water dripping from the ceiling—- what should I do now?
Hello everyone.
Currently just completed a stay at a Motel 6/ Studio 6 combo property… Yes they’re both in one. One on each wing with the same front desk servicing both right in the center.
I had originally booked a stay for Tuesday-Sunday in a Motel 6 room with refrigeratomicrowave.. got in to check in around 3am so they checked me in right away. The next morning, I was moved to a room without refrigeratomicrowave.. somewhere somehow a mistake had been made and my reservation for that microwave/fridge room would have only been thru until Saturday… meaning I’d have to move rooms for that Saturday night stay. Exhausted, with everything going on, I just went ahead and moved Wednesday morning so to have a smooth couple days and not worry. The room was so bad. The smell of wet/dampness, masked by commercial grade scented cleaners, it was Bad, and to top it off the A/c unit didnt do much to circulate the air - upon further inspection, at a glance it was clearly dirty with dust/lint, and had rust on the condenser coils. Too tired and aware that the rooms were short, I didnt make a big deal over it, just wiped down what I could and the front desk provided me with a fan to circulate the air.
By the way they have all been A++++ all staff I have encountered. Bravo. So I dont want any of this to fall on them Or make them feel bad for it if its outside of their controls- which is usually the case in these corporate ran places.
Later on at some point I I noticed the bathroom floor was kinda always rather wet… and thought maybe the shower curtain was funky or cracked and ended up coming out into the floor… Cleaned it up, all well, then it was back not long after but not a lot, so maybe I just missed some earlier… THEN I am sitting on the toilet cutting my toenails, when I felt a cold drop of water spray across my back/neck, and again, rapidly increasing, I turned to see that the water was dripping from the brown/black spot on the ceiling directly above me, and it was hitting the lid of the tank splashing it all on the floor where I was finding the puddles.
Again still exhausted and dealing with a bunch of other stuff, plus only having 2 nights left, I didnt make a fuzz over it, likely they have to have known already…
Well I completed my stay on the Motel 6 side on Sunday, and added more but moved to the Studio 6 side, the difference is like night and day… all come with a full size fridge and kitchenette w sink/counters/storage space. No smells in this building, plus I am right next to the pool. And most notably the front desk helped me immensely again by giving me the literal first room coming from the other side, so not to have to haul all my stuff too far, and also did a seamless check in allowing me to check in to my Studio 6 4pm check in early, as soon as I checked out from Motel 6 at noon.
I did make mention about the leaky ceiling at check out, “they had scheduled maintenance and on the way”.
Oh and I am 99.99999% my neighbor at the Motel 6 side-which had connecting rooms 😄- pretty sure she was a crackwhore…. All day and night traffic coming and going as they let the door auto-slam. Then hearing dudes talking, female moaning and what sounded like rhythmic slapping as she moaned… and the unmistakeable sounds of “crack lighters” aka torches… while family guy played in the background and other people just talking casually 🤭😂🤣 They were loud enough that my phone camera mic could pick up the noises just thru the wall, and my friends and I had a blast with that on snapchat at 2am 😅
I have photos of the watemold damage and I may have saved some of the snapchats 😂
If I contact Motel 6 corporate about the leak/mold to ensure it’s addressed and fixed before which left unnattended could have potentially end in a liability claim if a future guest whon hurt ( I know not all black mold is toxic! Still causes me allergy, itchy eyes) I also worry the staff might get blamed for it, when they have all been excellent in their present job title, and noticed that the front desk staff would on occasion also take on housekeeping shifts… maybe they were just covering their breaks. 🤷♂️ so I do plan on commending the staff in the email as well
What would you do/think? Any similar experiences? Would it be possible to get some refund from them?
submitted by Swimming-Most-6756 to hotels [link] [comments]
Currently just completed a stay at a Motel 6/ Studio 6 combo property… Yes they’re both in one. One on each wing with the same front desk servicing both right in the center.
I had originally booked a stay for Tuesday-Sunday in a Motel 6 room with refrigeratomicrowave.. got in to check in around 3am so they checked me in right away. The next morning, I was moved to a room without refrigeratomicrowave.. somewhere somehow a mistake had been made and my reservation for that microwave/fridge room would have only been thru until Saturday… meaning I’d have to move rooms for that Saturday night stay. Exhausted, with everything going on, I just went ahead and moved Wednesday morning so to have a smooth couple days and not worry. The room was so bad. The smell of wet/dampness, masked by commercial grade scented cleaners, it was Bad, and to top it off the A/c unit didnt do much to circulate the air - upon further inspection, at a glance it was clearly dirty with dust/lint, and had rust on the condenser coils. Too tired and aware that the rooms were short, I didnt make a big deal over it, just wiped down what I could and the front desk provided me with a fan to circulate the air.
By the way they have all been A++++ all staff I have encountered. Bravo. So I dont want any of this to fall on them Or make them feel bad for it if its outside of their controls- which is usually the case in these corporate ran places.
Later on at some point I I noticed the bathroom floor was kinda always rather wet… and thought maybe the shower curtain was funky or cracked and ended up coming out into the floor… Cleaned it up, all well, then it was back not long after but not a lot, so maybe I just missed some earlier… THEN I am sitting on the toilet cutting my toenails, when I felt a cold drop of water spray across my back/neck, and again, rapidly increasing, I turned to see that the water was dripping from the brown/black spot on the ceiling directly above me, and it was hitting the lid of the tank splashing it all on the floor where I was finding the puddles.
Again still exhausted and dealing with a bunch of other stuff, plus only having 2 nights left, I didnt make a fuzz over it, likely they have to have known already…
Well I completed my stay on the Motel 6 side on Sunday, and added more but moved to the Studio 6 side, the difference is like night and day… all come with a full size fridge and kitchenette w sink/counters/storage space. No smells in this building, plus I am right next to the pool. And most notably the front desk helped me immensely again by giving me the literal first room coming from the other side, so not to have to haul all my stuff too far, and also did a seamless check in allowing me to check in to my Studio 6 4pm check in early, as soon as I checked out from Motel 6 at noon.
I did make mention about the leaky ceiling at check out, “they had scheduled maintenance and on the way”.
Oh and I am 99.99999% my neighbor at the Motel 6 side-which had connecting rooms 😄- pretty sure she was a crackwhore…. All day and night traffic coming and going as they let the door auto-slam. Then hearing dudes talking, female moaning and what sounded like rhythmic slapping as she moaned… and the unmistakeable sounds of “crack lighters” aka torches… while family guy played in the background and other people just talking casually 🤭😂🤣 They were loud enough that my phone camera mic could pick up the noises just thru the wall, and my friends and I had a blast with that on snapchat at 2am 😅
I have photos of the watemold damage and I may have saved some of the snapchats 😂
If I contact Motel 6 corporate about the leak/mold to ensure it’s addressed and fixed before which left unnattended could have potentially end in a liability claim if a future guest whon hurt ( I know not all black mold is toxic! Still causes me allergy, itchy eyes) I also worry the staff might get blamed for it, when they have all been excellent in their present job title, and noticed that the front desk staff would on occasion also take on housekeeping shifts… maybe they were just covering their breaks. 🤷♂️ so I do plan on commending the staff in the email as well
What would you do/think? Any similar experiences? Would it be possible to get some refund from them?
2024.05.21 09:19 Sorry-Ad-3571 NDIS Transportation Services in Oran Park -NDIS Gardening Services in Oran Park
Empowering Lives with Premium Homes Support Services
Welcome to Premium Homes Support Services, where compassion and personalized care define our mission. Our dedicated team strives to enhance the quality of life for individuals with diverse needs through a range of tailored services. Whether you require safe transportation, thorough house cleaning, or beautiful gardening, we are here to support you every step of the way.Our Services
- Transportation: Reliable and accessible transportation for appointments, social outings, and errands.
- House Cleaning: Comprehensive cleaning services to maintain a clean and safe home environment.
- Gardening: Expert maintenance and landscaping to create serene outdoor spaces.
Why Choose Us?
At Premium Homes, we adopt a holistic approach, addressing physical, emotional, and social well-being. Our compassionate professionals are committed to making a positive difference in your life, ensuring that you feel valued and supported.Join Our Community
We invite you to join our family, where inclusivity and empowerment are at the heart of everything we do. Whether you need support for yourself or a loved one, we are here to provide the care and understanding you deserve.For more information, visit ~Premium Homes Support Services~ and discover how we can assist you in living a more fulfilling life.
https://premiumhomessupportservices.com.au/wp-content/uploads/2024/03/AdobeStock_602934240-3-1536x1024.jpeg
Sparkling Clean Homes: The Benefits of Professional House Cleaning Services
Maintaining a clean home is essential for health and well-being, but busy schedules often make it challenging to keep up with household chores. This is where professional house cleaning services come to the rescue, providing a convenient solution for a spotless home without the hassle.The Advantages of Hiring Professional Cleaners
- Expertise and Experience: Professional cleaners possess the skills and knowledge to tackle even the toughest cleaning tasks efficiently. They are trained to use the right techniques and products for different surfaces and materials, ensuring a thorough and safe clean.
- Time-Saving: Hiring a cleaning service frees up your valuable time, allowing you to focus on more important tasks or simply enjoy leisure activities. You no longer need to spend your weekends scrubbing floors or dusting furniture.
- Customized Cleaning Plans: Professional cleaning services offer flexible plans tailored to your specific needs. Whether you require a one-time deep clean or regular maintenance, you can customize the service to suit your lifestyle and preferences.
- Healthier Living Environment: A clean home reduces the risk of allergies, respiratory issues, and other health problems. Professional cleaners use high-quality products and equipment to eliminate dust, allergens, and bacteria, creating a healthier environment for you and your family.
2024.05.21 08:29 GhoulGriin Best Coin Wrappers
 | submitted by GhoulGriin to u/GhoulGriin [link] [comments] https://preview.redd.it/ub48xmqk4q1d1.jpg?width=720&format=pjpg&auto=webp&s=7072fbcc42657a13c48922eb6bcc03c155822c59 Get ready to dive into the fascinating world of Coin Wrappers! This article brings you the latest and most innovativecoin wrappers in the market that will not only protect your coins but also add a touch of style to your collection. From sturdy plastic cases to elegant velvet pouches, we've got you covered with our top picks. The Top 5 Best Coin Wrappers
Reviews🔗New Condition: 36 Count Coin Wrappershttps://preview.redd.it/eq3okszk4q1d1.jpg?width=720&format=pjpg&auto=webp&s=838fed032173d25f31282fdd37ae2c14ab3c7b6a For the past few weeks, I've been using these handy coin wrappers to keep my loose coins organized and tangle-free. The 36-count is just right, never running out and always having a fresh one nearby. One thing I noticed is the quality is inconsistent—sometimes they tear easily, but other times they're surprisingly strong. Overall, the coin wrappers are a great addition to my daily routine, but I wish they were a bit sturdier. 🔗Efficient Coin Wrapping Kit with Crimper Toolhttps://preview.redd.it/c8fheycl4q1d1.jpg?width=720&format=pjpg&auto=webp&s=16f672bafa28eb18ba3f0f751b6cb5476cd3311a As a lover of coins, I've been on the hunt for a reliable coin wrapper set to store my collection with ease and style. That's when I stumbled upon the Nadex 128 Assorted Preformed Crimped End Coin Roll Wrappers. This set is a game-changer! The first thing that caught my eye was the variety of coins it covers. From pennies to quarters, this set has got me covered. And with 128 wrappers and a manual coin wrapper crimper, I can wrap my coins without ever having to run out of wrappers again. The heavy-duty kraft paper wrappers are a great bonus too. They provide a durable and professional look to my precious coin collection. However, it can be a bit tricky to get the crimp just right, so I have to be patient and careful with each wrapper. One minor drawback is that the crimp tool can be a bit finicky at times. I had to figure out the right technique to get the perfect crimp every time. But once I got the hang of it, it became a breeze. In the end, I couldn't be happier with this coin wrapper set. It not only makes my coin collection look more organized and stylish but also gives me peace of mind knowing my coins are securely wrapped. Overall, I would highly recommend the Nadex 128 Assorted Preformed Crimped End Coin Roll Wrappers with Coin Wrapper Crimping Tool to any coin enthusiast. It's a fantastic addition to any coin storage setup! 🔗Organize Loose Coins with High-Quality Coin Wrappershttps://preview.redd.it/bs3biptl4q1d1.jpg?width=720&format=pjpg&auto=webp&s=ab332529bb0af3daed5736f35fe5282f4afa807d I recently tried out the Magnif Assorted Coin Tubes, Preformed Wrappers, and let me tell you, they sure make wrapping those loose coins a breeze. I was skeptical at first, but these handy little wrappers were a game-changer for me. Wrapping up quarters and dimes has never been so effortless. One of the highlights was the assorted variety of tube wraps. They fit perfectly and made me feel like a pro when wrapping up my loose change. However, I also noticed that they didn't have the option to fit for different coin sizes, so I had to use a bit of creativity to make them work. Overall, I'm glad I gave these coin wrappers a try. They've certainly made my life easier when it comes to managing my loose change. 🔗Coin Wrapper for Quarters: Kraft Paper, Crimped End, 40 Coins, $10 Valuehttps://preview.redd.it/b0ubvt2m4q1d1.jpg?width=720&format=pjpg&auto=webp&s=61aaa9e8ec604ec14caa1d4903951092709314a5 Every coin collection deserves a proper storage solution, and the Preformed Tubular Coin Wrappers by MMF Industries have proven to be the perfect companion to my collection. The kraft paper finish not only adds a touch of elegance but also enhances the presentation of my coins. The crimped end design makes filling the roll a breeze, and the ABA standard color conformity adds credibility to my collection. I was pleasantly surprised by the cost-effectiveness of these coin rolls, with each one holding 40 quarters and boasting a total value of $10.00. However, I did notice that the product specifications stated a larger size and weight than what arrived, which was slightly disappointing. Nevertheless, the overall experience has been incredibly satisfying, and I highly recommend these coin wrappers for any collector out there. 🔗Safe and Secure Coin Wrapper Rolls (256 Assorted) - Perfect for Sorting and Storagehttps://preview.redd.it/6fartdfm4q1d1.jpg?width=720&format=pjpg&auto=webp&s=166d5d452d5049bfca8c031b611cb715c82bb601 As a busy mom, I found these L Liked coin wrappers to be a lifesaver. With 256 color-coded rolls for quarters, pennies, nickels, and dimes, these wraps made it easy for me to keep my coin collection organized. I appreciated the heavyweight Kraft paper that adds an extra layer of security. However, using these wrappers with an automatic machine did take a little more effort than when manually filling them. Despite the slight inconvenience, the preformed wrappers were well worth it for the ease of hand wrapping and the added safety they provided. Overall, a solid and reliable product for any coin collector. Buyer's GuideA coin wrapper is a protective cover designed to store and preserve coins in a secure and organized manner. For coin collectors and enthusiasts, coin wrappers provide an essential tool for displaying and protecting their valuable collections. Choosing the right coin wrapper can make all the difference in maintaining the quality and appearance of your coins over time. In this buyer's guide, we'll discuss the important features to consider when selecting a coin wrapper and provide some general advice to help you make the best purchase.Important Featureshttps://preview.redd.it/23o3l30n4q1d1.jpg?width=720&format=pjpg&auto=webp&s=6dc122bc80153e169b6743f335b96d529a94eaaa MaterialCoin wrappers are typically made of either paper or plastic material. Both have their advantages and disadvantages. Paper-based coin wrappers are more eco-friendly, but they tend to be more prone to tearing or moisture damage. Plastic coin wrappers, on the other hand, offer better durability and moisture resistance, but they may be less environmentally friendly.SizeDifferent coin wrappers cater to specific coin sizes, so it's essential to choose one that can accommodate the coins in your collection. Most wrappers are designed for specific coin series, such as US coins, European coins, or world coins. Make sure to check the packaging or product description to ensure you're buying the right size for your coins.Design and StyleCoin wrappers come in various designs and styles, each with its unique aesthetic appeal. Some wrappers have specific themes or artworks, while others feature simple, clean designs. Consider which design aligns best with your collection and overall aesthetic preferences when selecting a coin wrapper. https://preview.redd.it/7ohyvp8n4q1d1.jpg?width=720&format=pjpg&auto=webp&s=67009901e801eb6a4bae89cb0c931643e03a5730 ConsiderationsQuality and DurabilityAs you'll be relying on your coin wrapper to protect your valuable collection, it's crucial to choose one of high quality and durability. Look for coin wrappers made from high-quality materials and constructed with attention to detail.Ease of UseYour coin wrapper should be easy to use and handle, especially if you plan to swap out coins frequently. Look for wrappers with clear, easy-to-use packaging and a secure closure to ensure your coins remain safe and protected. https://preview.redd.it/815uvfln4q1d1.jpg?width=720&format=pjpg&auto=webp&s=36aba5e763579844645bac466add34141c7ef230 Storage OptionsDepending on the size of your collection, you may want to consider coin wrappers that offer additional storage options, such as coin albums, binders, or storage boxes. These options can help you keep your collection organized and easily accessible.General AdviceWhen purchasing coin wrappers, it's essential to consider the specific needs of your collection, such as coin size, material preference, and design. Additionally, always read product reviews and check the manufacturer's reputation to ensure you're buying a product of high quality and customer satisfaction.Coin wrappers are a valuable investment for any coin collector or enthusiast, as they provide a protective and organized storage solution for your precious coins. By carefully considering the important features, making thoughtful choices, and following general advice, you can find the perfect coin wrapper for your collection. FAQhttps://preview.redd.it/pzx9k05o4q1d1.jpg?width=720&format=pjpg&auto=webp&s=f858bc6ab5b35a1370ac00126fa71da7b0421266 What is a Coin Wrapper?A Coin Wrapper is a protective and decorative covering used to conceal and adorn coins, especially collectible ones. It adds an attractive design to the coin and safeguards it from being scratched or damaged.Why do people use Coin Wrappers?Coin Wrappers are used for various reasons such as enhancing the aesthetic appeal of a coin, preserving its original condition, protecting it from wear and tear, and adding a personalized touch by customizing the design.What materials are Coin Wrappers made of?Coin Wrappers are typically made of high-quality materials like brass, copper, gold-plated brass, or stainless steel. Some manufacturers also use acrylic or metal alloys for added durability and protection.How do I install a Coin Wrapper?To install a Coin Wrapper, first make sure the coin is clean and free of dirt or debris. Next, slide the coin into the Coin Wrapper, ensuring that it fits snugly. Some Coin Wrappers may require additional assembly or attachment, so follow the manufacturer's instructions carefully.Can I customize my Coin Wrapper?Yes, many manufacturers offer custom Coin Wrappers that allow you to personalize the design with your own text, images, or logos. Customization options may vary depending on the manufacturer or the type of Coin Wrapper you choose.How do I clean and maintain my Coin Wrapper?To clean and maintain your Coin Wrapper, use a soft cloth and a mild cleaning solution appropriate for the material used. Avoid using abrasive materials or harsh chemicals, as they can damage the finish of the Coin Wrapper. Regularly inspect your Coin Wrapper for signs of wear and tear and replace it if necessary.Are Coin Wrappers waterproof?While some Coin Wrappers may offer some level of water resistance, it's essential to check the specific product's details for waterproofing. It's always best to keep Coin Wrappers away from direct contact with water or moisture to ensure their longevity and performance.What is the difference between a Coin Cover and a Coin Wrapper?A Coin Cover is similar to a Coin Wrapper but usually features a clear, transparent window on one side, allowing the original coin design and date to be visible. Both Coin Covers and Coin Wrappers serve the purpose of protecting and enhancing collectible coins.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.21 08:14 Significant-Tower146 Best Cobweb Duster
 | submitted by Significant-Tower146 to u/Significant-Tower146 [link] [comments] https://preview.redd.it/3hn0017u1q1d1.jpg?width=720&format=pjpg&auto=webp&s=60a5140a5d3948f3150f7ff9ccf6b7d5ab446ae0 Get ready to bid farewell to those pesky cobwebs that have been lurking in the corners of your home with the Cobweb Duster! In this roundup, we've handpicked a selection of the best cobweb-dusting products on the market, making it easy for you to find the perfect tool to keep your living space squeaky clean. Get ready to give those cobwebs a goodbye they won't forget! The Top 19 Best Cobweb Duster
Reviews🔗Unger StarDuster Cobweb Duster: Effective and Convenient for Washing Creviceshttps://preview.redd.it/d8jscdru1q1d1.jpg?width=720&format=pjpg&auto=webp&s=9a255f92488263d7d407e488537fbc286ad2af66 I recently tried the Unger StarDuster Cobweb Duster, a handy tool for removing those pesky cobwebs from corners and crevices. The duster's unique cone shape was a game-changer, as it easily reached tight areas that other dusters couldn't access. I also appreciated the soft, split-tip bristles, which didn't leave any marks or damage on the surfaces I cleaned. Admittedly, I found the duster to be a bit heavy to maneuver, especially since it's meant to be used with Unger telescopic poles (sold separately). But overall, I thought it was a solid choice if you're looking for a tool specifically designed for tackling those hard-to-reach spots. Just make sure to handle it carefully and follow the product guidelines to avoid any mishaps. 🔗Indoor & Outdoor 10ft Lightweight Cobweb Duster Extension Polehttps://preview.redd.it/dq7v7t0v1q1d1.jpg?width=720&format=pjpg&auto=webp&s=12f28792cfeb554b30401b834bf1ffed31b63cc3 My experience with the Cobweb Duster Pole has been rather satisfactory, considering it's primarily designed to help with dusting and pest control in hard-to-reach areas. It's an easy-to-use and lightweight 10-foot extension pole, perfect for those who need a little extra length for their cleaning tools. What stood out positively in my experience was the durability and ease of use. The pole is sturdy enough to withstand constant use, which I found to be incredibly handy. Also, the fact that it's an extender pole for a Webster Nylon Cobweb Duster or scrapper attachment makes it easy to transition between different tasks. However, there were a couple of cons to consider. For starters, some users have reported issues with compatibility as it doesn't fit certain end adaptors for sprayers. In my case, it didn't work with the one I had, but I found a workaround fairly easily. Additionally, although the pole is of high quality, it's quite simple in terms of design, which might be a drawback for those looking for fancier or more feature-packed equipment. Overall, the Cobweb Duster Pole does what it's designed to do - make cleaning dusty and hard-to-reach spots a breeze. But it's essential to note that its design limitations might not cater to everyone's requirements. 🔗Versatile Cobweb Duster for Daily Cleaninghttps://preview.redd.it/g6th504w1q1d1.jpg?width=720&format=pjpg&auto=webp&s=1bdbd354a1a3af6380252b3a533b87e709bcef3b I've been using the Hicavar screw-on cobweb duster replacement head for my cleaning needs, and it's been a game-changer. The 10-inch length is perfect for cleaning those hard-to-reach areas. This versatile tool can be used handheld or attached to a telescopic pole for cleaning high ceilings without the need for a ladder. Plus, its soft poly fibers won't scratch walls or windows. What stood out to me was the ease of installation and the versatility of this duster head. It's really easy to clean and reuse multiple times, and the simple twist-on mechanism makes it a breeze to attach it to an extension pole. It's great for cleaning furniture, window sills, blinds, and much more. One of the best things about this duster is its durability and effectiveness. After using it for a while, it still works like new, and the materials are high-quality, making it the perfect addition to any cleaning arsenal. It's safe to use on all surfaces and really does make the cleaning process easier. While I've had a fantastic experience with this cobweb duster, I did notice that it can be a bit stiff to use, especially at first. However, this problem is easily solved with a little bit of wrist action during use. Overall, the Hicavar screw-on cobweb duster replacement head is a top-notch tool for cleaning hard-to-reach areas and is definitely worth the investment. 🔗Telescopic Swish Microfiber Feather Duster for Cobweb Cleaninghttps://preview.redd.it/zh6dq4bw1q1d1.jpg?width=720&format=pjpg&auto=webp&s=20161f2ea70f3087ddfde434827f7b4e67dab0c9 I recently tried the Gütewerk extendable feather duster, and let me tell you, it has made my life a whole lot easier! This bad boy can reach up to 140 cm, which is perfect for cleaning those hard-to-reach spots. It's like the Swiss Army knife of dusters! The telescopic retractable pole handle is a game-changer - I can easily adjust its length for different areas of my home. And the 360-degree flexible head, made of dense microfibers, is just the cherry on top. It catches dust and dirt like a charm without causing a mess. Plus, the non-slip handle and the removable cleaning brush make this duster a true gem. But, as with any product, there's a little room for improvement. While the feather duster is lightweight and easy to use, it does take a bit of effort to clean. Hand-washing is the way to go, but who has time for that, right? Overall, I'd say this feather duster is a winner in my book. It's like having a personal assistant in dust-busting. 🔗Microfiber Dusters Set for Cobweb Cleaninghttps://preview.redd.it/4ff7a9qw1q1d1.jpg?width=720&format=pjpg&auto=webp&s=75e7f640a509ef1fe5b356c0a28cb23701510f2b I've used these durable microfiber dusters recently and can tell you they're a breeze to use. These 5-pack cobweb dusters come with 2 handle sets, making them perfect for reaching those hard-to-get places. The handles are extendable and bendable, allowing me to clean high ceilings and hard-to-reach areas with ease. The microfiber head is super soft and environmentally friendly, making it gentle on surfaces while effectively cleaning those pesky cobwebs. I also appreciate that the product is washable, so it's always ready for the next cleaning spree. Using these dusters, I've noticed an improvement in the overall cleanliness of my home. They're easy to grip and use, and the 3 feather dusters offer exceptional durability. When not in use, they can be disassembled and stored neatly, taking up minimal space. Of course, there are a few drawbacks. The instructions state that these dusters can only be hand-washed, which might be inconvenient for some users. Additionally, due to their size and length, they may not be as portable as some other cleaning tools. Overall, I'd highly recommend these microfiber dusters for anyone looking to effectively clean hard-to-reach areas in their home. 🔗Efficient Split-Tip, Polyply Cobweb Duster Brushhttps://preview.redd.it/lg2q2n0x1q1d1.jpg?width=720&format=pjpg&auto=webp&s=373d70bb1677d1f50eaaf11e034b8fecd49acaf6 Imagine being stuck with a stubborn cobweb that just won't go away. I needed a solution that would get rid of it without causing any damage. That's when the Unger Cobweb Duster Brush came to the rescue. With its split-tipped, poly fibers, this duster brush effectively tackled the cobweb without scratching the delicate surface. As I worked my way through the ceiling, the smooth handle of the duster provided a comfortable grip, preventing any hand fatigue that usually comes with such chores. The best part? The electrostatic energy of this duster made the cobweb and dust cling to it, ensuring a thorough cleaning. With the Unger Cobweb Duster Brush, I dusted more than just the ceiling - from moldings to shelves and desks, this duster was the perfect tool for the job. Of course, no product is without its drawbacks. For me, it was the length - at 3.1 inches, it wasn't the most convenient for reaching high places like the crown molding. But overall, the Unger Cobweb Duster Brush proved to be a practical, effective tool for making my ceiling and home dust-free. 🔗Lightweight Cobweb Duster with Extendable Polehttps://preview.redd.it/bi2yts9x1q1d1.jpg?width=720&format=pjpg&auto=webp&s=eff5df20f4e80c5206eab8de86b9065ac10507d7 I tried the Round Cobweb Duster with Extension Pole out of curiosity as I was not a fan of using dusters. The product exceeded my expectations. Not only did it make the task of cleaning cobwebs off the ceiling easier, but also without the typical back pain and discomfort that comes with holding a heavy duster. The lightweight aluminum pole definitely helped with reaching the highest corners of the ceiling. The duster head, made of microfiber, is quite versatile. It was gentle on surfaces like picture frames and paintings, yet effective at removing dust from even the most obscure cobweb-filled corners. It was handy for cleaning hard to reach places like kitchen appliances and the inside of my car. Plus, the extendable pole made reaching tall fans and light fixtures a breeze. However, I found the duster head a bit challenging to clean. After several attempts at cleaning it, I discovered it was recommended to hand wash it, despite no specific instructions provided. I also found changing between different duster heads a bit tricky, especially when using the telescope pole—it added an extra layer of complexity to an otherwise simple dust-removing tool. Overall, I'd say the Cobweb Duster lived up to its claim of being the perfect tool for cleaning high ceilings. It could have been improved with better cleaning instructions and simpler mechanisms for changing duster heads. But given these minor issues, I'd still recommend it to anyone longing for their ceiling to be spider-web free. 🔗Cobweb Duster Replacement Head for Telescopic Polehttps://preview.redd.it/udpkpwpx1q1d1.jpg?width=720&format=pjpg&auto=webp&s=ae414d1d98174c0b0dc780e39f313b915e1f3705 Having used this cobweb duster head in my own home, I must say it's a game-changer for removing stubborn cobwebs and dust from high, hard-to-reach areas. The durable PVC bristles with split tips not only make it easy to knock down cobwebs but also help in reaching dust and dirt in those pesky corners. The best part, it attaches seamlessly to my JT Eaton telescopic pole, which can extend up to 10 feet, making it even more efficient. This duster has made cleaning ceilings and door frames feel like a breeze, and I highly recommend giving it a try. Despite some users mentioning the need for a little extra care while cleaning, it's an overall great value and a must-have for any homeowner. 🔗Superior High Ceiling Duster Kit with Versatile Brush Headshttps://preview.redd.it/uccngxwx1q1d1.jpg?width=720&format=pjpg&auto=webp&s=82661f7de7d957c8bb3ea74e7a132a2ec535c80f I recently had the pleasure of using the Hicavar 20 Foot High Ceiling Fan Duster to tackle some tricky dusting tasks in my home. The first thing that stood out to me was the versatility of the product - with a 5-12 foot extension pole, I could easily reach those high, hard-to-reach areas without worrying about my safety. The kit came equipped with four brush heads that made swift work of my daily cobweb and dust cleaning needs. I especially loved the microfiber and bendable chenille dust collectors, which were perfect for cleaning my furniture and appliances with ease. However, one downside I encountered was that the dust collectors did have a tendency to collect and retain some of the dust particles, which required occasional cleaning. Nevertheless, this minor drawback was easily outweighed by the convenience and efficiency the product offered. Overall, I'd say the Hicavar 20 Foot High Ceiling Fan Duster is a fantastic choice for those seeking an affordable, reliable, and user-friendly way to keep their homes dust-free - it truly lives up to its 5.0-star rating. 🔗Effortless Extra Long Microfiber Cobweb Duster for Cleaning High Areashttps://preview.redd.it/l47j9cby1q1d1.jpg?width=720&format=pjpg&auto=webp&s=d4fdd0c04b6576b5284b4085f8b2d8b2157c2838 I've been using the HEOATH microfiber feather duster daily, and it's been a game-changer for my home cleaning routine. This product has made reaching high, hard-to-reach areas a breeze, eliminating the need for precarious ladder or stool balancing. The extra long, extendable pole is not only functional, but also built with strength, thanks to the thickened connector and thick pole. The microfiber head is incredibly soft, ensuring gentle but effective dust removal. I also appreciate that it's non-scratch and washable, making it both environmentally friendly and easy to maintain. While washing, it's essential to follow the proper instructions by hand washing with warm or low heat water and letting it air dry in a ventilated place. However, it has come to my attention that the product's non-scratch feature comes with a downside - it could be too gentle for removing stubborn dirt. Additionally, the duster might be slightly difficult to maneuver around tight spaces due to its size. Overall, the HEOATH microfiber feather duster is a handy cleaning tool that simplifies the chore of dusting in even the toughest to reach areas. 🔗Lightweight Cobweb Duster with 3-Stage Extension Polehttps://preview.redd.it/4cmhzrry1q1d1.jpg?width=720&format=pjpg&auto=webp&s=ea067548bb258b0835e220b6a6c0501a0e38a24e There's nothing quite like the satisfaction of easily removing cobwebs from high ceilings without needing a ladder. The Eversprout 5-to-12 Foot Cobweb Duster and Extension-Pole Combo does just that, with a 20-foot reach that's perfect for cleaning those hard-to-reach areas. The soft bristles are gentle on surfaces and the lightweight, 3-stage aluminum extension pole makes it a breeze to use. One of the best features of this duster is its hand-packed quality, ensuring that the bristles stay pristine and ready for action. It's also great that the duster head is securely attached to the pole, offering a sturdy and steady cleaning experience. However, some users have mentioned that the bristles could be a bit firmer, making for an even more effective cleaning process. Overall, the Eversprout Cobweb Duster and Extension-Pole Combo is a handy and affordable tool for keeping your home or workspace free from unsightly cobwebs. It's a must-have for anyone who values cleanliness and convenience in their daily routines. 🔗Sturdy Medium-Stiff Cobweb Duster for Easy Cleaninghttps://preview.redd.it/bkl9mi1z1q1d1.jpg?width=720&format=pjpg&auto=webp&s=9888f003f14c077fefff7ae7324c9be9119348d7 The Eversprout Twist-On Cobweb Duster is a handy helper that does away with dust and cobwebs in those tricky-to-reach areas. Made of medium-stiff bristles in a striking blue tone, this duster brings quality and durability to your hands - something that will last for a good while. Its lightweight design adds to the ease of use, making it a breeze to maneuver high ceilings and those tight corners. The stiff bristles are just what your windows need to be free from pesky spider webs, even outdoors. The Eversprout duster works seamlessly with their poles and easily attaches to common threaded brooms, sweepers, and paintbrushes for a versatile cleaning experience. Overall, it's a great little duster that proves its worth many times over. 🔗Super-Reach Cobweb Duster Extension Pole for Spotless Cleaninghttps://preview.redd.it/iyf7svez1q1d1.jpg?width=720&format=pjpg&auto=webp&s=421b3bb27efdb9c4d9a05678877b67f683327721 The DocaPole Extension Pole Cobweb Duster Kit is the ideal solution for reaching high areas in your home. I recently tried using it to clean a hard-to-reach cobweb on my ceiling, and it worked like a charm! . The pole extends from 5 to 12 feet, giving me the extra reach I needed. The cobweb duster itself is made of synthetic materials, making it an efficient dust catcher and perfect for those with allergies. However, I noticed it only weighs 2.4 pounds, so you may need to add some extra weight to keep it steady while cleaning. Overall, it's a fantastic cleaning tool for those hard-to-reach places, and I can't wait to use it again in my home. 🔗Extra Long Cobweb Duster for High Corners and Window Screenshttps://preview.redd.it/07654cyz1q1d1.jpg?width=720&format=pjpg&auto=webp&s=cfb0a48130b8bb9e2a986efce51e70f4ce3fc949 During a recent remodeling project, I was tasked with cleaning every inch of the house, including the pesky cobwebs that had been lingering on the ceilings and corners. I came across the Ettore Products Mighty Touch Cobweb Duster, and I must admit, I was a bit skeptical. But after giving it a try, I was pleasantly surprised by its effectiveness and convenience. One of the first things I noticed was the duster's unique shape, which allowed me to reach even the most stubborn cobwebs in corners and along edges. The soft bristles were gentle enough to use around delicate decorations, while still being sturdy enough to remove the dust and cobwebs from window screens and ceiling fans. The 3-section steel handle was a game-changer, extending to an impressive 9 feet and allowing me to easily clean high ceilings and hard-to-reach places without needing to risk falling or using a ladder. The extended pole also made it comfortable to hold and maneuver, making the cleaning process much less intimidating. However, I did experience a small obstacle when trying to lock the extension poles in place. Some users have noted that the fittings are reverse-threaded, which may cause some confusion at first. But once I figured that out, the duster worked smoothly and efficiently. In summary, the Ettore Products Mighty Touch Cobweb Duster has proven to be a reliable and practical cleaning tool for my daily life. Its innovative design, soft and sturdy bristles, and convenient extendable handle make it a must-have for anyone looking to tackle those pesky cobwebs with ease. Just remember to lock those poles properly, and you'll be golden! 🔗Bendable Microfiber Cobweb Duster for Home Cleaninghttps://preview.redd.it/3dznypb02q1d1.jpg?width=720&format=pjpg&auto=webp&s=b1a4b75bd2606fcb94b26a0dc4ab65a293801837 I recently gave the YVYV Microfiber Feather Duster a try in my daily cleaning routine, and let me tell you, it's been a game-changer! . With its 100-inch extendable and bendable long handle, this duster is perfect for those hard-to-reach areas that usually give me a headache. The high-quality microfiber material is incredibly soft and sturdy, making it a breeze to clean dust, pollen, and even pesky cobwebs. The duster has become my go-to tool for cleaning all sorts of surfaces, from appliances to furniture, and even the ceiling. The bendable feature is particularly handy for cleaning tricky areas, like lamps or window blinds, without having to risk potential damages. The only downside is that it needs to be hand-washed, but the results are well worth the extra effort. Overall, the YVYV Microfiber Feather Duster has proven to be a reliable and effective cleaning companion in my home. Buyer's GuideCobwebs are often considered a sign of a neglected or dirty space. However, having cobwebs can also be simply a result of the natural process of spider weaving. Whatever the reason, if you're looking for ways to keep your space clean and free from cobwebs, a cobweb duster is the perfect tool for you.Important Featureshttps://preview.redd.it/25ktepr12q1d1.jpg?width=720&format=pjpg&auto=webp&s=dbd4c811a556c66ed81f795ca8019d9a0d1197e5 MaterialWhen choosing a cobweb duster, consider the material it is made of. Most cobweb dusters are made of soft materials such as synthetic fibers or natural materials like goat hair. Soft materials are effective at removing cobwebs without damaging surfaces.LengthAnother important feature to consider is the length of the cobweb duster. Depending on the area you plan to use it, choose a duster with an appropriate length. Longer dusters allow for better reach and are suitable for high ceilings, while shorter dusters are more suitable for lower areas.HandleThe handle of the cobweb duster should be comfortable to hold and easy to maneuver. A grip that is easy to hold and a shape that fits your hand comfortably make using the duster an enjoyable task. https://preview.redd.it/nv4vrd422q1d1.jpg?width=720&format=pjpg&auto=webp&s=53844ac5d0000bd381939044a634e9a6268b3868 Cleaning and MaintenanceConsider dusters with easy-to-clean and washable materials. Proper maintenance of your cobweb duster keeps it in good condition and ensures it remains effective for a long time.ConsiderationsAllergiesIf you or someone in your household has allergies to natural materials, choose synthetic fiber cobweb dusters instead of those made from goat hair or other animal fibers. https://preview.redd.it/lufgyzf22q1d1.jpg?width=720&format=pjpg&auto=webp&s=56c218c25fee757257d1036e782f8bf89cf8c7d0 Spider PreventionA cobweb duster is only one of the tools you can use to prevent cobwebs from forming. Regular cleaning, proper ventilation, and sealing cracks and crevices can help keep spiders away and prevent the formation of cobwebs.General AdviceDon't WaitOnce you notice a cobweb, don't wait to clean it. Cobwebs multiply quickly, and the longer you wait, the more difficult it becomes to remove them without the help of a cobweb duster. https://preview.redd.it/bc8mp8v22q1d1.jpg?width=720&format=pjpg&auto=webp&s=cade7580c4edcce8fa2f3ce03eb39f9ca3cafbbc Be GentleWhen using a cobweb duster, be gentle. Cobwebs are delicate structures and can easily be damaged if you're too rough when cleaning. Gently sweep the duster across the cobweb and it will come off easily.MaintenanceRegularly maintain your cobweb duster by washing it or replacing it if necessary. Proper care ensures the duster remains effective and functional for a long time.FAQWhat is a Cobweb Duster?A Cobweb Duster is a specialized cleaning tool designed to effectively remove cobwebs and other web-like substances from ceilings, walls, and other high-up surfaces. It usually consists of a long, flexible wand with an ergonomic grip and a brush-like head that can easily reach and clean hard-to-reach areas.What materials are used to make a Cobweb Duster?Cobweb Dusters are typically made with materials that are lightweight, durable, and easy to clean. Common materials include plastic, metal, and synthetic fibers for the brush. The handles are often made from plastic or a sturdy combination of plastic and metal. Some Cobweb Dusters are designed with reusable heads made from high-quality materials that can withstand numerous uses.How does a Cobweb Duster work?A Cobweb Duster works by using the movement of the brush-like head to dislodge cobwebs and other debris. The user simply holds the handle and moves the duster around the surface, allowing the bristles to collect and remove the cobwebs. The flexible design of the Cobweb Duster allows it to easily maneuver around complex surfaces and in tight spaces. Some Cobweb Dusters come with attachments or removable heads that allow for different cleaning styles or purposes.What are the benefits of using a Cobweb Duster?
What should I look for when purchasing a Cobweb Duster?When purchasing a Cobweb Duster, consider the following factors:
|
2024.05.21 08:05 LaPurple95 Need help customizing an ARF trooper
Hey everyone!
ARF troopers are one of my favorite clone designs. I’ve been looking at making a custom figure for the 3.75 line since we don’t have an ARF trooper outside of the clone wars style figures.
I’m planning on just using one of the Clone Wars style heads, but I could use some help from my fellow collectors to figure out which clone trooper body would fit that style of Clone Wars head.
It doesn’t have to be a perfect fit but i’m looking to see which clone body might be the best fit.
My plan is to use a plain white clone trooper if possible. Any suggestions on which figure?
Thank you for any help! :)
submitted by LaPurple95 to StarWarsTVC [link] [comments]
ARF troopers are one of my favorite clone designs. I’ve been looking at making a custom figure for the 3.75 line since we don’t have an ARF trooper outside of the clone wars style figures.
I’m planning on just using one of the Clone Wars style heads, but I could use some help from my fellow collectors to figure out which clone trooper body would fit that style of Clone Wars head.
It doesn’t have to be a perfect fit but i’m looking to see which clone body might be the best fit.
My plan is to use a plain white clone trooper if possible. Any suggestions on which figure?
Thank you for any help! :)
2024.05.21 07:30 garthmuss Anyone ever made Rob cosman’s bench into a router table?
I love the design of the cosman bench, I dabble with hand tools and a good bench would allow me to do a lot more.
But I just purchased a new Incra wonder fence (woohoo!) and router plate to make a router table. Why not make the fence removable and mount the whole thing on the cosman bench? The Incra wonderfence needs a table in that sort of shape already. Open underneath, it’d be a piece of cake to incorporate good dust collection. Pop on a solid insert into the hole and take the fence off (easy with the wonder fence it mounts via knobs and T-nuts) and it’s a flat bench for hand tools or assembly.
Beef up the cosman bench with some steel section running across under the router for (probably unnecessary) support to prevent the router from causing any sag.
Can anyone see any huge issue with this? I can’t seem to find anyone having ever done it before.
https://incra.com/router_table_fences-wonder_fence.html
https://robcosman.com/products/the-cosman-workbench-mdf-top
Only the plans for the bench will be bought, and I’ll make it myself.
submitted by garthmuss to woodworking [link] [comments]
But I just purchased a new Incra wonder fence (woohoo!) and router plate to make a router table. Why not make the fence removable and mount the whole thing on the cosman bench? The Incra wonderfence needs a table in that sort of shape already. Open underneath, it’d be a piece of cake to incorporate good dust collection. Pop on a solid insert into the hole and take the fence off (easy with the wonder fence it mounts via knobs and T-nuts) and it’s a flat bench for hand tools or assembly.
Beef up the cosman bench with some steel section running across under the router for (probably unnecessary) support to prevent the router from causing any sag.
Can anyone see any huge issue with this? I can’t seem to find anyone having ever done it before.
https://incra.com/router_table_fences-wonder_fence.html
https://robcosman.com/products/the-cosman-workbench-mdf-top
Only the plans for the bench will be bought, and I’ll make it myself.
2024.05.21 07:29 Count-Daring243 Best Co Witness Red Dot
 | submitted by Count-Daring243 to u/Count-Daring243 [link] [comments] https://preview.redd.it/e8adgd3qtp1d1.jpg?width=720&format=pjpg&auto=webp&s=50073a13d02b0b73c3d533fa0b65c18febef9166 Welcome to our latest product review featuring the Co Witness Red Dot. This versatile accessory has been making waves in the shooting community for its sleek design and impressive performance. In this article, we will be diving into its features, pros, and cons, ensuring that you have a clear understanding of whether it's the right fit for your shooting needs. So, buckle up and prepare to learn all about the Co Witness Red Dot. The Top 13 Best Co Witness Red Dot
Reviews🔗Thomas & Betts Red-Dot Weather-proof 1-Gang Co Witness Red Dot Cover for FS Boxeshttps://preview.redd.it/fslz2djqtp1d1.jpg?width=720&format=pjpg&auto=webp&s=f62f11f6aa9db06d1ded42e3a95fe33ab09348ca As a reviewer, I've been using the Red-Dot CCB 1-Gang RT Blank Cover in my daily life for a few weeks now, and I must say, it's been a game-changer for me. One of the features that stood out for me is the die-cast construction and industrial design, which offers a rugged, protective enclosure for my devices. The clean cover edges provide excellent gasket sealing, keeping my wiring devices and electronic components safe from dust, moisture, and other potential hazards. I also appreciate the precision cast and machined surfaces that allow me to safely pull wires without damaging any components. However, there's one downside I've noticed - it can be a bit tricky to mount the cover using the convenient mounting lugs, especially if I'm working in tight spaces. Despite this minor inconvenience, the Red-Dot CCB 1-Gang RT Blank Cover has been a reliable and effective solution to keep my wiring devices and electronics protected in a variety of situations. 🔗Rugged, University Red Nike KD 13 EP Sneakerhttps://preview.redd.it/iqyy00xqtp1d1.jpg?width=720&format=pjpg&auto=webp&s=6f7718dc347263cc7d9f3808c02246a49f9cee12 As a sneaker enthusiast, I recently tried the Nike KD 13 'University Red' in men's size 10. The moment I slipped my foot into the shoe, I felt the comfort of the synthetic upper material. The rubber sole with a flat heel was perfect for my outdoor workouts. The round toe and full-length Zoom Air unit provided an excellent fit and responsiveness. The shoe's standout feature was the all-over graphic print inspired by hip-hop culture. The metallic gold Swoosh branding added an opulent touch. However, I found that the design made the shoes a bit flashy for my everyday casual wear. Overall, the Nike KD 13 'University Red' is a durable, stylish, and comfortable sneaker. While the graphic print might not be for everyone, the shoe's performance and comfortable fit make it a solid choice for those who appreciate eye-catching design. 🔗Hardwired Smoke & Carbon Monoxide Detector with AA Battery Backuphttps://preview.redd.it/djs2qgartp1d1.jpg?width=720&format=pjpg&auto=webp&s=cc1a885672bbcd5402c0f0a1b8bf883469513887 I've been using the Kidde Code One hardwired smoke and carbon monoxide detector in my home for a few months now. It's a reliable safety device that's been working smoothly. The photoelectric sensor detects visible fire particles, perfect for detecting slow smoldering fires. I also appreciate the electrochemical carbon monoxide sensor that uses an 85-decibel alarm when it senses a hazard. The unit is interconnected, which means all the installed detectors will sound their alarms if one detects a threat. However, I do wish the unit would be a little more user-friendly in terms of the hush feature, as it seems a bit too sensitive. It can be quite tricky to get it to work without accidental activation. Another improvement needed is the battery backup, which, although convenient, can be less reliable over time. Overall, the Kidde Code One hardwired smoke and carbon monoxide detector is a decent safety device for home use. It might require a bit of patience while installing and dealing with the hush feature. But once you get it working, it's a great device to have in your home to protect you from potential fire and carbon monoxide hazards. 🔗Kidde 10-Year Sealed Battery Smoke and CO Detector with Voice Alerthttps://preview.redd.it/djvchamrtp1d1.jpg?width=720&format=pjpg&auto=webp&s=be76c04430a715074b93cff339e2998c5c3b014c I had high hopes for this Kidde Smoke and Carbon Monoxide Detector when I installed it in my home. The voice warning system was a nice touch, and I appreciated that it had a 10-year battery life. But, it wasn't long before I started experiencing some disappointing issues. Firstly, the device seemed over-sensitive. It would randomly go off in the middle of the night, causing disruptions to our sleep. Even when cooking with the stove or using the fireplace, the alarm would sound without any apparent reason. This unnecessary alarming made me question the product's reliability. On top of that, the battery life didn't seem to last as long as advertised. After a year, I had to replace the batteries, which was quite inconvenient considering the product's claim that the batteries would last 10 years. Despite these drawbacks, the Kidde Smoke and Carbon Monoxide Detector's biggest plus was its simplicity. There were no complex settings to navigate, making it easy to use, especially for people who might not be tech-savvy. In conclusion, while the Kidde Smoke and Carbon Monoxide Detector had its unique advantages, it was let down by its inconsistent performance and battery life. I would recommend looking into other brands that promise better reliability and safety. 🔗Red Dot Vertical Weatherproof Cover for Co Witnesshttps://preview.redd.it/44zv4s5stp1d1.jpg?width=720&format=pjpg&auto=webp&s=202777ef12b46b199ad2e00e0ded464251fb825c The Red Dot CKMUV is a versatile, weatherproof cover that's been a lifesaver in my outdoor projects. I've used it to protect receptacles, switches, and plugs in both dry and wet locations, ensuring their safety and longevity. One feature I love about this cover is its deep design that keeps the elements out, even for large extension cords. The installation process was a breeze, and once it's in place, it's secure and stays put. While the cover is a bit taller than other options, it's a small price to pay for the additional protection it offers. However, the one drawback I've noticed is that it seems to be attracting some corrosion over time, which may impact its performance in the long run. But overall, the Red Dot CKMUV has been a reliable and effective solution for my outdoor electrical needs. 🔗Red Dot VXG-11 Co Witness Sight Ceiling Lighthttps://preview.redd.it/s0hvlristp1d1.jpg?width=720&format=pjpg&auto=webp&s=6708e3dc06e2f7b737482ff4adaf79dfa7f3ed9f Recently, I tried out the Red Dot VXG-11-C ceiling cross feed vapor tight outdoor light fixture, and let me tell you, it was a breeze to install. The outlet box cap and globe make the whole process quite safe and easy. I particularly liked the copper-free aluminum and stainless steel screws, which really upped the corrosion resistance of the product. That's something we can all appreciate, right? One thing I noticed was the high quality replaceable porcelain socket with high temperature leads - it's clear that they've put a lot of thought into durability. It's always a relief when you don't have to worry about replacing parts for a while. However, I did notice a limitation with the globe: it was only suitable for 200-Watt incandescent bulbs and certain compact fluorescent ones. This could potentially limit the flexibility of the fixture. I appreciated the fact that the globe was made of lime crystal glass which is shatterproof. The fixture was UL listed, which added more peace of mind. So, all in all, it was a pleasant experience using this product, but there's always room for improvements. It's all about striking the right balance, isn't it? 🔗Smart Carbon Monoxide and Smoke Detector with Lithium Battery Backuphttps://preview.redd.it/jfoe4vxstp1d1.jpg?width=720&format=pjpg&auto=webp&s=bda157a1d57d3d383a80a24ed5e5dc63309215b6 I recently encountered the Kidde Smoke & Carbon Monoxide Detector, Hardwired with Lithium Battery Backup, and gave it a try in my home. The first thing that stood out was its reliability. Being hardwired, it's not dependent on batteries that need regular replacement, which is a great feature if you forget to change them. Additionally, the lithium battery backup provides an extra layer of protection during power failures, allowing you to rely on it during emergencies. One of the most impressive functions is the interconnect capability, allowing you to link up to 24 of these alarms together. This creates an extensive network of protection throughout your home, ensuring every room stays safe. However, there were a few downsides I noticed. The first was the sensitivity of the alarm, which could be a bit too reactive for my liking. It went off a few times unexpectedly, causing a bit of anxiety when there was no actual danger. Another issue was the difficulty I experienced with the disable feature. Although it's designed to be user-friendly, I found it a bit confusing and difficult to use. Overall, the Kidde Smoke & Carbon Monoxide Detector is a reliable and robust device that provides peace of mind with its dual-sensor technology and lithium backup. The only downside is that it seems a bit more sensitive than necessary, which could lead to false alarms. 🔗Easy-to-Use Rust-Resistant Home Fire Extinguisherhttps://preview.redd.it/4oqu3kfttp1d1.jpg?width=720&format=pjpg&auto=webp&s=46618a8a1e54b07c90c30bc640bfd69747a1778f I recently added a Kidde Full Home Fire Extinguisher to my household, and let me tell you, it's been a game-changer. First of all, it's easy to use - even if you've never had to operate a fire extinguisher before. The clear instruction label with graphics is a lifesaver, and the easy-to-read gauge ensures you always know if your fire extinguisher is charged and ready to go. Speaking of the safety pin, it's designed to be easy-to-pull in an emergency, which is exactly what you want when time is of the essence. The rust- and impact-resistant nylon handle is a nice touch too, as it ensures the extinguisher stays in good condition for years to come. The highlight of my experience, though, is the peace of mind I've gained knowing that I have a reliable fire extinguisher on hand. It's always in the back of my mind when I'm cooking or working in the garage, and that sense of security is priceless. All in all, I'd highly recommend this product to anyone looking to protect their home and family. 🔗Stylish Red Polka Dot Leather Wallet from Comme des Garçonshttps://preview.redd.it/4wpe3oqttp1d1.jpg?width=720&format=pjpg&auto=webp&s=b95acc9d26c7189fd9e71ca357c2d21ef92fc9a1 I recently gave the Comme des Garçons Red Polka Dot calf-leather wallet a whirl in my daily life, and let me tell you; it's a stylish and functional accessory that adds a touch of flair to my outfits. Made with high-quality calf leather, this wallet has a classic look that's perfect for any occasion. The polka dot print adds a playful edge, making it stand out amongst my other wallets. One highlight of this wallet is its all-around zip fastening, which ensures that my essential cards and cash are safely secured without the need for any fuss. The main compartment and card slots are easy to access and use, making it a cinch to organize my belongings. Though I love the design and functionality of this wallet, there's one aspect that could use improvement: the wallet's size. While it's compact enough for everyday use, it might not be the best choice for travelers who need to carry more than just the basics. Overall, I'd recommend this Comme des Garçons wallet to anyone looking for a stylish and functional accessory to add to their outfit. Just be mindful of its size when planning to use it on the go. 🔗10-Year Worry-Free Sealed Battery Combination Smoke and Carbon Monoxide Detector with Voice Alarm (2-Pack)https://preview.redd.it/vu0l5f5utp1d1.jpg?width=720&format=pjpg&auto=webp&s=fcb62ae75f00cb16be048bc07ac1ae7b93153588 I recently had the opportunity to test out the Kidde 10 Year Worry-Free Sealed Battery Combination Smoke and Carbon Monoxide Detector, and let me tell you, it's quite the experience. While some of the reviews I came across had high praise for the product, I personally didn't have the best luck with it. The first thing that stood out to me was the ease of installation. It's a simple process, and the instructions are clear. But once I had it up and running, I noticed something concerning: it would occasionally false alarm. Now, I'm not talking about a few random beeps here and there. This thing would go off like a fire alarm during a zombie apocalypse. The voice alarm feature was supposed to be a perk, but honestly, it just made it worse. Instead of a calm, clear voice letting me know there was an issue, it sounded like someone hitting a red siren button. It was absolutely terrifying, and not conducive to a good night's sleep. On the positive side, the sealed-in lithium battery did last for the full 10 years as advertised. And the end-of-life warning was a nice touch, letting me know when it was time to replace the unit. However, the cons definitely outweighed the pros here. The false alarms were a huge issue, and the voice alarm feature was more of a hindrance than a help. After experiencing these issues, I had to permanently disable the alarm, which kind of defeats the purpose of having one in the first place. Overall, the Kidde 10 Year Worry-Free Sealed Battery Combination Smoke and Carbon Monoxide Detector didn't live up to my expectations. While it's a handy product to have around the house, I wouldn't recommend it based on my experience. There are other brands out there that might provide a more reliable and less terrifying solution. 🔗Comme des Garçons Polka Dot Print Zip-Around Wallet in Redhttps://preview.redd.it/pin1exlutp1d1.jpg?width=720&format=pjpg&auto=webp&s=9f562c6c92ab556d91e3a39d5fbeb668207994bd As a fan of unique and functional wallets, I was excited to try out this red polka dot-print zip-around wallet from COMME DES GARÇONS. Walking around town with this wallet drew a lot of attention from fashion enthusiasts, and I could immediately tell it's made from high-quality red and white leather. One of the features that stood out to me was the partitioned compartment. It made organizing my bills and cards a breeze, eliminating the mess that usually comes with carrying around a wallet filled with miscellaneous items. The coin pocket was also a great addition, ensuring I didn't lose track of my loose change. However, the zip-around closure did require a bit more effort to open and close, which wasn't the smoothest experience. Additionally, the debossed internal logo could have been a bit more subtle. Nonetheless, these minor shortcomings didn't detract from the overall style and functionality of this wallet. In conclusion, this COMME DES GARÇONS wallet is a standout choice for anyone looking for a unique, high-quality accessory that carries both style and practicality. 🔗Premium Polka Dot Treat Bags for Gifting and Partieshttps://preview.redd.it/i785gd0vtp1d1.jpg?width=720&format=pjpg&auto=webp&s=63d8f40a69c5df133b13eab339a9e8262a602e89 Last week, I was on the hunt for unique and vibrant treat bags for a friend's birthday party. I came across these polka dot cellophane bags and let me tell you, they truly stood out! The bright pink color added excitement and festivity to the festivities. The plastic material was a great choice, as it was sturdy enough to hold a variety of treats and the bags had a classic design that made them perfect for gifting. Not only did they hold up well, but they also had the perfect size for small treats and candies. I appreciated that they could be used for various occasions, not just birthday parties. They were also reasonably priced, which made them an even better find. Overall, I'm really happy with my purchase. The bags were easy to use, and their durability made them a convenient solution for party favors. The only downside I noticed was that the twist ties for sealing the bags were a bit short, but this didn't significantly impact my experience. 🔗Red Polka Dot Balloons for Birthdays & Celebrationshttps://preview.redd.it/bfeem6evtp1d1.jpg?width=720&format=pjpg&auto=webp&s=17d5076d25bdb9b130de0a0161e8cebb4e5703db Recently, I had the chance to use these Ruby Red Dots 12" Latex Balloons for a birthday party, and let me tell you, they were a hit! The vibrant red color and polka dot pattern really added a festive touch to the decorations. These balloons are great for any occasion, from patriotic parties to Valentine's Day celebrations. One of the things that stood out to me was how sturdy they were. Even though a few of the kids played a little too rough with them, none of them popped. I was also impressed by their size, which made them perfect for decorating tables or hanging from the ceiling. On the downside, I did notice that some of the balloons had a strange smell when they were first inflated. It wasn't overpowering, but it was definitely there. However, after a few days, the smell seemed to dissipate. Overall, these balloons are a fun and affordable addition to any party. They're durable, easy to inflate, and add a touch of whimsy to any celebration. Just remember to keep an eye out for that peculiar odor when you first blow them up! Buyer's GuideA co-witness red dot sight is a versatile and practical accessory for your firearm. It allows you to use both traditional iron sights and the red dot for increased accuracy and speed during target acquisition. As you explore the market for co-witness red dot sights, there are several key factors to consider to ensure you find the best fit for your needs. https://preview.redd.it/5h5sccqvtp1d1.jpg?width=720&format=pjpg&auto=webp&s=f20e7ee4f17b86c330e001993683390708fd9dac Important Features
ConsiderationsWhen purchasing a co-witness red dot sight, consider the purpose for which you will use it. If you will primarily shoot close-range targets, a smaller sight may suffice. However, if you need to engage targets at greater distances, choose a sight with a larger objective lens for improved clarity and low-light performance.Additionally, think about the durability and weight of the sight. Lighter materials, such as aluminum, can reduce overall weight without sacrificing durability. If you plan to use the sight frequently, durability becomes an essential consideration. https://preview.redd.it/jd9lok3wtp1d1.jpg?width=720&format=pjpg&auto=webp&s=5f2f538d6d66d8c86dd9ee5fd4fa8eadc555c82c AdviceBefore making a purchase, ensure you are familiar with proper installation and adjustment procedures for co-witness red dot sights. This knowledge will help you avoid issues and ensure your sight is functioning correctly.Finally, practice using the sight in different lighting conditions and scenarios to familiarize yourself with the various settings and features. This hands-on experience will help you maximize the potential of your new co-witness red dot sight and improve your overall shooting performance. A co-witness red dot sight is a valuable addition to any firearm setup, providing increased accuracy and speed during target acquisition. By researching the important features, considering various factors, and following the advice outlined in this guide, you can find the perfect co-witness red dot sight for your needs and enjoy improved shooting performance. FAQhttps://preview.redd.it/0wm1lkmwtp1d1.jpg?width=720&format=pjpg&auto=webp&s=bf4b9effb169a1dc7a48365fa4a416bb20e1eb40 What is a co-witness red dot sight?A co-witness red dot sight is an optical sighting device designed to work with a rifle's iron sights. It allows the user to use both the iron sights and the red dot sight simultaneously, providing maximum versatility in various shooting situations.What are the benefits of using a co-witness red dot sight?The benefits of using a co-witness red dot sight include faster target acquisition, enhanced accuracy at close to medium ranges, improved sight picture, and compatibility with iron sights for backup. It is particularly useful in low light conditions and dynamic shooting scenarios. https://preview.redd.it/239zuexwtp1d1.jpg?width=720&format=pjpg&auto=webp&s=885ad5f211d4e434801c53a390c676a46b5dd54f What types of co-witness red dot sights are available?There are several types of co-witness red dot sights, including reflex sights, holographic sights, and laser sights. Reflex sights are the most common, offering a simple, affordable solution. Holographic sights provide a more advanced, sophisticated experience, while laser sights offer a high level of precision and versatility.What factors should I consider when choosing a co-witness red dot sight?
How do I properly mount a co-witness red dot sight on my rifle?Properly mounting a co-witness red dot sight requires a sturdy, zero-resetable base that attaches directly to your rifle's Picatinny or Weaver rail system. Follow the manufacturer's instructions and ensure proper installation and alignment for accurate sighting.What accessories can I use with a co-witness red dot sight?You can use various accessories with a co-witness red dot sight, including lens protectors, magnifiers, and different mounting systems. These accessories can enhance the functionality and performance of your red dot sight, making it better suited for a variety of shooting situations.As an Amazon™ Associate, we earn from qualifying purchases. |
2024.05.21 07:01 mohnstrudel Stellar Blade - EVE 1:4 Resin Statue von Light and Dust Studio
Stellar Blade - EVE 1:4 Resin Statue von Light and Dust Studio
I do ship EU-wide, please contact me, should questions arise.
Tolle Statue eines Mitglieds der Eve Defense Force. Wunderbar verarbeitete und sehr detaillierte Eve Statue aus Polystone - künstlichem Stein-Harz-Gemisch.
Besonderheiten: weltweit 199 Stück
Release-Status: - Preorder. Statue wird voraussichtlich am Ende Q1 2025 erscheinen und wir erwarten sie voraussichtlich Ende Mai 2025 im Warenlager. - Diese Angabe ist ohne Gewähr! Wir leiten nur die Schätzung vom Hersteller weiter. - Falls das Datum überschritten wurde und hier immer noch eine Schätzung aus der Vergangenheit steht, dann bedeutet das NICHT, dass die Figur bereits im Lager in Deutschland ist. Sie ist NUR dann auf Lager in Deutschland, wenn der Text dies entsprechend sagt und/oder die Kategorie weiter oben "Lagernd vor Ort" heißt.
Preis: 830€ (35% Anzahlung möglich) Außerdem Zahlungspläne mit 6 und 12 Monaten verfügbar.
Wie immer bei unseren Artikeln - sämtliche Gebühren sind, im Gegensatz zu anderen Anbietern auf dem Markt, bereits inkludiert. Versand erfolgt ausschließlich aus Deutschland, es fallen keine Zoll- und Importgebühren an. Als einziger EU-weit legal zugelassener Händler von Resin-Statuen garantieren wir exklusive Qualität und Vertrauenswürdigkeit, die ihr nirgendwo anders finden.
Ihr kauft keine Katze im Sack :)
Maße der Statue: Größe: ca. H52.5cm x W47.9cm x D29cm Gewicht: TBA, ca. 12 kg (geschätzt)
You are not prepared! :)
submitted by mohnstrudel to statuesCollectible [link] [comments]
I do ship EU-wide, please contact me, should questions arise.
Tolle Statue eines Mitglieds der Eve Defense Force. Wunderbar verarbeitete und sehr detaillierte Eve Statue aus Polystone - künstlichem Stein-Harz-Gemisch.
Besonderheiten: weltweit 199 Stück
Release-Status: - Preorder. Statue wird voraussichtlich am Ende Q1 2025 erscheinen und wir erwarten sie voraussichtlich Ende Mai 2025 im Warenlager. - Diese Angabe ist ohne Gewähr! Wir leiten nur die Schätzung vom Hersteller weiter. - Falls das Datum überschritten wurde und hier immer noch eine Schätzung aus der Vergangenheit steht, dann bedeutet das NICHT, dass die Figur bereits im Lager in Deutschland ist. Sie ist NUR dann auf Lager in Deutschland, wenn der Text dies entsprechend sagt und/oder die Kategorie weiter oben "Lagernd vor Ort" heißt.
Preis: 830€ (35% Anzahlung möglich) Außerdem Zahlungspläne mit 6 und 12 Monaten verfügbar.
Wie immer bei unseren Artikeln - sämtliche Gebühren sind, im Gegensatz zu anderen Anbietern auf dem Markt, bereits inkludiert. Versand erfolgt ausschließlich aus Deutschland, es fallen keine Zoll- und Importgebühren an. Als einziger EU-weit legal zugelassener Händler von Resin-Statuen garantieren wir exklusive Qualität und Vertrauenswürdigkeit, die ihr nirgendwo anders finden.
Ihr kauft keine Katze im Sack :)
Maße der Statue: Größe: ca. H52.5cm x W47.9cm x D29cm Gewicht: TBA, ca. 12 kg (geschätzt)
You are not prepared! :)
anime #AnimeFigurenShop #animeshop #animestatuen #animetoys #collectible #collectibles #collectibleskaufen #collector #evefigurine #figurecollector #handsomecake #resincollectibles #resincollectibleskaufen #resinstatuen #ResinStatuenKaufen #resinstatues #statuecollectible #statuecollectibles #statuecollector #statuescollectible #statuescollectibles #statuescollector #stellarblade #stellarbladecollectibles #stellarbladeeve #stellarbladeevefigurine #stellarbladeevestatue #stellarbladeevetoy #stellarbladestatuen #stellarbladetoy #stellarbladetoys
https://store.handsomecake.com/product/stellar-blade-eve-14-resin-statue-von-light-and-dust-studio/2024.05.21 06:58 No_Marzipan_1230 Industrial Mage Chapter 03 – Hiring & Deadwoods
Synopsis:
An engineer in another world—blending science and magic to achieve greatness in a world where skills and levels reign supreme.
—
Ethan was just a plain old engineer, but everything changed when he was reborn into a world of skills, levels, and magic. With his advanced knowledge far ahead of the time period he finds himself in, this new reincarnated life will be much different than his last, especially because he can construct, deconstruct, and reconstruct runes—something no one else can do.
But with royal politics, looming tax collectors, a mountain of debt, dungeon incursions, cults, and hostile fantasy races mixing together into a cocktail of bullshit that threatens to bury his dreams; Ethan must bridge the gap between steel and sorcery to grow stronger. — Runecrafting is slow burn. — What to Expect: - Weak to very strong progression - Hardcore wish fulfillment - A balance of action, kingdom building, and runecrafting. - MC will trigger an industrial revolution, revolutionize magic, modernize agriculture, communication, commerce, textile production, education, transportation, sanitation, weapons manufacturing, leisure & entertainment, and medicine.
First < Previous Next >
"Business opportunity?" Jack blinked, amused. "Intriguing. One doesn't often hear a noble propose such a thing to a [Necromancer]."
Roland shifted uncomfortably.
Ignoring him, Ethan leaned back in his chair.
"Let's just say these are unorthodox times, Jack. And frankly, the problems plaguing Holden call for equally unorthodox solutions." He gestured towards a nearby chair. "Do have a seat, and allow me to elaborate. It concerns a matter of public health, and specifically, a rather lackluster product currently on the market. One common folk cannot even afford."
Jack raised an eyebrow, taking the offered seat. "Public health and [Necromancy]? This does get more interesting by the moment, my lord."
Ethan leaned forward again.
"I'll be blunt. It's the Blight, Jack. You're undoubtedly familiar with its unpleasant effects." He wrinkled his nose slightly. "The lethargy, the nausea…and the frankly horrendous stench that clings to the afflicted."
"The Blight has stages, my lord. But yeah, I get the gist. Though, I confess, raising the recently departed isn't exactly..."
Ethan chuckled. "Not quite, my friend. While your talents with the departed are impressive, I have a different skillset in mind. One that involves cleanliness."
Jack's smile vanished, replaced by a wary arch of an eyebrow. "Cleanliness? You want a [Necromancer] for scrubbing floors?"
Ethan leaned back in his chair, steepling his fingers. "Not scrubbing floors, precisely. What do you know about the Blight, Jack?"
"It's more than a mere sickness, my lord. It's a clinging parasite that latches onto the unfortunate soul and slowly devours their life force. The early signs are subtle—a sickly sweet odor, lethargy, pale clammy skin."
Jack shuddered dramatically, and continued. "Then comes the hunger. An insatiable craving that gnaws at their insides. The victims start developing a craving for raw flesh instead. Their mere touch becomes corrupting, causing plants to wilt and wounds to fester. Disembodied whispers of the spirits torment them, sapping their willpower—they're like a sweet escape from their suffering. It chips away at their will to fight, turning them inward until they become shells of their former selves."
Ethan blinked. Jack had a knack for theatrics and being dramatic, it seemed.
"In the final stages, the body decays into a walking corpse driven by an unquenchable hunger to consume the life force of others."
"Okay, stop," Ethan raised his hand with a sigh. "Who does the Blight infect?"
Jack took a deep breath. "That's the interesting part, my Lord. The Blight only seems to affect those with little to no mana. It's like mana acts as a shield. Majority of peasants are mana-less. It's a common disease, my lord. Even nobles suffer from the Blight; mostly children given that their mana is still developing."
"So, mana is our solution?" Ethan raised an eyebrow. "Why do you think no one's arrived at this conclusion given that the Blight is such a common occurrence you'd think there'd be a cure?"
"There is a cure, my lord. But—"
"It's way too expensive."
"Indeed, that is correct, my lord."
"Regardless, our solution here is sanitation. You see, the Blight thrives in filth. The stench, the lethargy, it all stems from a miasma that festers in unsanitary conditions. It eats on people's lifeforce. And the current concoction on the market does little to combat it. There's a simple solution—people are aware of it—but sadly, it's expensive, not as effective as it should be, and frankly, an insult to hygiene."
"Oh, are you talking about soap, my lord?"
"Soap," Ethan confirmed. "More specifically, newly made soap. As soap's made with magic here, it has slight mana in it—although it's a different matter altogether that said mana dissipates. Regardless, if bought new and used, it helps with the Blight. However, we need better soap. The current offerings are woefully inadequate, and at exorbitant prices. I envision a mass-produced, affordable soap that can combat the Blight's effects, doesn't lose mana, and can invigorate people."
Jack considered this for a moment. "And why, my lord, would a noble like yourself be concerned with such mundane matters?"
"Jack," Ethan's eyes narrowed slightly, his tone turning icy. "I believe you forget yourself. It is not your place to question nobility. I suggest you remember your place and focus on the task at hand."
Jack's face turned ashen. He quickly lowered his eyes. "I apologize, my lord."
"You are forgiven." Ethan didn't particularly enjoy being a noble, but now that he was one, he needed to maintain certain boundaries.
Though Ethan had been slightly taken aback, Jack was right. Nobles seldom cared about peasants. Even less when it came to the Blight. Any and all solutions currently available for this very normal cause of death were expensive. Current brick they sold as 'soap' was inadequate, had pathetic fragrance, and performed even less when it came to hygiene. So, most peasants die due to lack of money. They couldn't buy soap, and the concoction for the Blight was too expensive.
But I don't really think like the nobles, as I am not one.
Silence stretched between the two for several long moments, and in that silence, Ethan considered the consequences.
The consequences of Ethan's plan would be far-reaching. There definitely would be a political firestorm. Soapmakers, likely well-established guilds with ties to influential nobles, would see their profits plummet and their influence challenged. They'd spread rumors about Ethan's soap being inferior or even dangerous, and might even resort to sabotage, threats, blackmail, or the like. Ethan might also face resistance from other barons who profit from the inflated price of Blight remedies.
I need to be prepared for whatever they throw at me, 'cause they definitely will.
Beyond the immediate political struggle, there could be social unrest. Slower, more expensive production methods often employ a larger workforce given that [Mages] weren't always available to make soap. There had to be a manual process discovered by the [Mages] of this world—though having tried the soap himself, it was quite lacking.
Ethan's plans for mass-produced soap could lead to unemployment among those currently making soap. He'd need to be prepared to address these concerns, perhaps by retraining displaced workers or offering them jobs in the new production facilities. Though, then again, the guilds he'd poach the unemployed people from wouldn't take it lightly.
Regardless, I need to do it. Fuck the guilds. I don't think Theo's dad will let anything happen to him—aka me now.
Theo's family was rather big. His father, Lord Alexander Lockheart, was arguably ruthless and cold, but he usually held his family's interest in his mind—knowing him and his militaristic nature, Ethan didn't doubt he'd latch onto the opportunities to make some hefty sum of money—money which he could use to fund his militaristic endeavors. The man was ambitious.
*Theo's the 4***th child of the Lockhearts. Even aside from Theo's dad, he's got five siblings: three older and two younger siblings. Two of whom, I can easily rely on. The eldest sibling, Maximillian, or Juliana, who is the second eldest. Benson's the third child, and he doesn't like me much, so Maximillian and Juliana are my only hope—though they're kind of disappointed in how Theo behaved, they wouldn't let something happened to me*, especially knowing that I, "Theodore Lockheart", am turning over a new leaf. Not to mention Theo's mom's too soft.*
Knowing his safety wouldn't be an issue, Ethan looked at Jack. He had only spoken like Theo to make sure he could set a proper boundary with Jack. Deciding that the awkward silence had gone for far too long, he spoke with a lighter tone.
"Though, if you must know, the Blight doesn't discriminate. It cripples the poor, yes, but it also weakens soldiers and undermines trade. A healthy populace is a productive populace, one that can pay taxes and contribute to the well-being of the entire barony. Besides," he added, a sly smile returning, "imagine the profit. Affordable, effective soap for all? It would be a goldmine. I'm especially looking forward to the reaction of noblewomen. They'll be in a frenzy. They'll be begging for this soap. We'll be swimming in coin."
Which I need given the looming tax and Holden's fucked up financial situation...
Unaware of what was going through Ethan's mind, Jack tapped his chin thoughtfully. "And, with all due respect, my lord, why do you need my help? What possible use could a [Necromancer] have in the realm of soap-making?"
Ethan leaned back, a smile playing on his lips. "While your skills in manipulating life force are undoubtedly impressive, Jack, it's your less publicized talent I'm particularly interested in."
Jack's eyes narrowed for a moment. "You mean...?"
"Imbuement." Ethan said.
Ethan wasn't too sure, but given that [Necromancers] and [Witches] were infamous classes, he'd heard rumors. They often imbued objects. Corpses in [Necromancers'] case and certain objects in [Witches'] case. It wasn't mana that they imbued exactly, but something else—which he had no clue about—that let them have control over the corpse/object they imbued. But, given that these two classes were the most affordable ones that could imbue anything at all and were experts in that regard, Ethan was pretty sure Jack could achieve his goal.
That was his theory, of course. It all depended on how long they could hold the mana inside the soap. Making the soap affordable and high quality—that he could handle. Keeping the mana within it, though, and getting some decent returns? Well, that depended a lot on Jack.
Jack ran a nervous hand through his scraggly brown hair, his eyes glinting.
"What if we could imbue the soap with mana?" Ethan said. "It would disrupt the Blight's ability to feed on life force. Think of it as a sort of 'static' that interferes with the Blight's 'signal'. So, we imbue mana into soap."
Jack frowned, considering this. "That's an interesting idea, my lord. But how would we create such a thing? Soap is expensive to make; you would have to employ mages—"
"Leave the soap to me. Deal with imbuing mana instead. As a [Necromancer], you have a unique understanding of life force and how it can be manipulated. I believe that with your help, we can develop a method to imbue soap with mana that stays in for as long as possible—you are the expert in imbuement, after all. The soap would then not only clean the body, but also create a sort of protective barrier against the Blight." He leaned back in his chair, watching Jack's reaction closely. "So, what do you think? Are you up for it?"
-2-
Ethan hummed as the carriage came to a stop near the house where those infected by the Blight were being kept under quarantine, in the company of Roland. The house wasn't luxurious by any means, it was quite small really. But it had been secured to allow them to observe the tainted. Ethan exited the carriage along Roland and Jack, and soon they were greeted by a tall, slender man in robes.
"Ah, Lord Theodore. It is my utmost pleasure to meet your esteemed self." the robed man bowed. His voice was even, but there was a wariness there—clearly, the man was not comfortable dealing with Ethan, or more like, Theodore who was infamous for his... nature.
Ethan wasn't happy with how the people of Holden and everyone acquainted with Theo regarded him, a reputation that likely spread more than just this town, but he couldn't do anything about it. Logically, he'd just need to deal with it one step at a time.
"No need to be so tense... Sir Miller." Ethan briefly checked his memory to bring up the information of the man.
Miller was the head physician of Holden.
"Esteemed guest," The man was still bowing, clearly uncomfortable and unable to bring himself to stand straight before a notorious lord such as Theodore. "Do not concern yourself with trivial manners and come in. The tainted have been secured, and preparations made, so please, this way."
The man led Ethan inside and after crossing through an empty room, they reached a space sectioned off by iron grills. A group of men armed with spears surrounded the door from the outside—they were armed with spears so they could deal with anyone that reached the third stage and became a brain-dead zombie without getting near them. The tall and burly men eyed Roland and Ethan, on alert at a noble's presence.
Ethan covered his face in a mask, stepped over the grills, into the open hall with rows of beds lining both sides, where about ten people lay, most on their back. If they noticed their Lord, the people lying on the bed didn't act like they noticed anything. "Please, Lord Theodore...!" Miller said. "You mustn't get near!"
"Nothing to worry, I won't be tainted," Ethan said. He was a [Mage] after all, and unranked one, but a mage nonetheless. He looked at the patients one by one.
They do look sickly... it is one thing hearing about it, but this is far more eye opening... Sighing, Ethan turned around and walked out.
"Jack, do your thing."
"Yes, my lord." Jack said as Ethan made it to Roland.
"Roland, we need to go to the Deadwoods, you and I."
Roland appeared apprehensive but did not question Ethan's intentions.
As Ethan and Roland walked out, Jack got started on the subjects. Ethan looked ahead. Grassy meadows stretched far and wide, dotted by occasional trees and bushes. The sun's golden rays washed over the land, leaving an orange tinge on the distant mountains. To the west of Holden lay the Deadwoods—easily spotted, as it stood as an ominous expanse of darkness in the otherwise brightly lit region. A mountain range stretched behind the Deadwoods and clung to the earth, meeting the borders of Corinth.
Ethan had to admit, the place was a sight to see despite how much the Deadwoods stood out like a sore thumb amidst all this greenery. Even then, the Deadwoods held a unique allure. Ethan got into the carriage with Roland in tow, then with a light jolt the carriage started moving. It was being pulled by two horses.
"With all due respect, my Lord, this seems unwise, no?"
"It'll be fine," Ethan reassured. "We have guards with us, and I have you to protect me."
"Why, is it not better to simply let us know what you require so we may fetch it in your stead?"
Ethan smiled, but didn't answer.
The Deadwoods soon came closer as the carriage sped up, drawing near to a stretch of meadows with trees scattered every few paces or so.
The carriage rattled as it went over a particularly large bump. Ethan gave a quick glance at Roland—the man had grown quieter since their departure. Clearly, he was contemplating what sorts of heinous plans his new lord had in store.
Suddenly, the carriage lurched to a halt. Ethan poked his head out of the window and called, "What's the hold-up?"
The driver gave an apologetic bow. "There's a large rock in the road, my lord."
"Then have the guards get rid of it." Ethan's voice carried a subtle note of annoyance. He really didn't have time for delays—as a rule of thumb, he usually hated them.
"My lord," Roland said. "It's a trap. We're under attack."
An arrow slammed right beside Ethan's head the next instant.
First < Previous Next >
Patreon Discord
submitted by No_Marzipan_1230 to HFY [link] [comments]
An engineer in another world—blending science and magic to achieve greatness in a world where skills and levels reign supreme.
—
Ethan was just a plain old engineer, but everything changed when he was reborn into a world of skills, levels, and magic. With his advanced knowledge far ahead of the time period he finds himself in, this new reincarnated life will be much different than his last, especially because he can construct, deconstruct, and reconstruct runes—something no one else can do.
But with royal politics, looming tax collectors, a mountain of debt, dungeon incursions, cults, and hostile fantasy races mixing together into a cocktail of bullshit that threatens to bury his dreams; Ethan must bridge the gap between steel and sorcery to grow stronger. — Runecrafting is slow burn. — What to Expect: - Weak to very strong progression - Hardcore wish fulfillment - A balance of action, kingdom building, and runecrafting. - MC will trigger an industrial revolution, revolutionize magic, modernize agriculture, communication, commerce, textile production, education, transportation, sanitation, weapons manufacturing, leisure & entertainment, and medicine.
First < Previous Next >
Chapter 03
-1-"Business opportunity?" Jack blinked, amused. "Intriguing. One doesn't often hear a noble propose such a thing to a [Necromancer]."
Roland shifted uncomfortably.
Ignoring him, Ethan leaned back in his chair.
"Let's just say these are unorthodox times, Jack. And frankly, the problems plaguing Holden call for equally unorthodox solutions." He gestured towards a nearby chair. "Do have a seat, and allow me to elaborate. It concerns a matter of public health, and specifically, a rather lackluster product currently on the market. One common folk cannot even afford."
Jack raised an eyebrow, taking the offered seat. "Public health and [Necromancy]? This does get more interesting by the moment, my lord."
Ethan leaned forward again.
"I'll be blunt. It's the Blight, Jack. You're undoubtedly familiar with its unpleasant effects." He wrinkled his nose slightly. "The lethargy, the nausea…and the frankly horrendous stench that clings to the afflicted."
"The Blight has stages, my lord. But yeah, I get the gist. Though, I confess, raising the recently departed isn't exactly..."
Ethan chuckled. "Not quite, my friend. While your talents with the departed are impressive, I have a different skillset in mind. One that involves cleanliness."
Jack's smile vanished, replaced by a wary arch of an eyebrow. "Cleanliness? You want a [Necromancer] for scrubbing floors?"
Ethan leaned back in his chair, steepling his fingers. "Not scrubbing floors, precisely. What do you know about the Blight, Jack?"
"It's more than a mere sickness, my lord. It's a clinging parasite that latches onto the unfortunate soul and slowly devours their life force. The early signs are subtle—a sickly sweet odor, lethargy, pale clammy skin."
Jack shuddered dramatically, and continued. "Then comes the hunger. An insatiable craving that gnaws at their insides. The victims start developing a craving for raw flesh instead. Their mere touch becomes corrupting, causing plants to wilt and wounds to fester. Disembodied whispers of the spirits torment them, sapping their willpower—they're like a sweet escape from their suffering. It chips away at their will to fight, turning them inward until they become shells of their former selves."
Ethan blinked. Jack had a knack for theatrics and being dramatic, it seemed.
"In the final stages, the body decays into a walking corpse driven by an unquenchable hunger to consume the life force of others."
"Okay, stop," Ethan raised his hand with a sigh. "Who does the Blight infect?"
Jack took a deep breath. "That's the interesting part, my Lord. The Blight only seems to affect those with little to no mana. It's like mana acts as a shield. Majority of peasants are mana-less. It's a common disease, my lord. Even nobles suffer from the Blight; mostly children given that their mana is still developing."
"So, mana is our solution?" Ethan raised an eyebrow. "Why do you think no one's arrived at this conclusion given that the Blight is such a common occurrence you'd think there'd be a cure?"
"There is a cure, my lord. But—"
"It's way too expensive."
"Indeed, that is correct, my lord."
"Regardless, our solution here is sanitation. You see, the Blight thrives in filth. The stench, the lethargy, it all stems from a miasma that festers in unsanitary conditions. It eats on people's lifeforce. And the current concoction on the market does little to combat it. There's a simple solution—people are aware of it—but sadly, it's expensive, not as effective as it should be, and frankly, an insult to hygiene."
"Oh, are you talking about soap, my lord?"
"Soap," Ethan confirmed. "More specifically, newly made soap. As soap's made with magic here, it has slight mana in it—although it's a different matter altogether that said mana dissipates. Regardless, if bought new and used, it helps with the Blight. However, we need better soap. The current offerings are woefully inadequate, and at exorbitant prices. I envision a mass-produced, affordable soap that can combat the Blight's effects, doesn't lose mana, and can invigorate people."
Jack considered this for a moment. "And why, my lord, would a noble like yourself be concerned with such mundane matters?"
"Jack," Ethan's eyes narrowed slightly, his tone turning icy. "I believe you forget yourself. It is not your place to question nobility. I suggest you remember your place and focus on the task at hand."
Jack's face turned ashen. He quickly lowered his eyes. "I apologize, my lord."
"You are forgiven." Ethan didn't particularly enjoy being a noble, but now that he was one, he needed to maintain certain boundaries.
Though Ethan had been slightly taken aback, Jack was right. Nobles seldom cared about peasants. Even less when it came to the Blight. Any and all solutions currently available for this very normal cause of death were expensive. Current brick they sold as 'soap' was inadequate, had pathetic fragrance, and performed even less when it came to hygiene. So, most peasants die due to lack of money. They couldn't buy soap, and the concoction for the Blight was too expensive.
But I don't really think like the nobles, as I am not one.
Silence stretched between the two for several long moments, and in that silence, Ethan considered the consequences.
The consequences of Ethan's plan would be far-reaching. There definitely would be a political firestorm. Soapmakers, likely well-established guilds with ties to influential nobles, would see their profits plummet and their influence challenged. They'd spread rumors about Ethan's soap being inferior or even dangerous, and might even resort to sabotage, threats, blackmail, or the like. Ethan might also face resistance from other barons who profit from the inflated price of Blight remedies.
I need to be prepared for whatever they throw at me, 'cause they definitely will.
Beyond the immediate political struggle, there could be social unrest. Slower, more expensive production methods often employ a larger workforce given that [Mages] weren't always available to make soap. There had to be a manual process discovered by the [Mages] of this world—though having tried the soap himself, it was quite lacking.
Ethan's plans for mass-produced soap could lead to unemployment among those currently making soap. He'd need to be prepared to address these concerns, perhaps by retraining displaced workers or offering them jobs in the new production facilities. Though, then again, the guilds he'd poach the unemployed people from wouldn't take it lightly.
Regardless, I need to do it. Fuck the guilds. I don't think Theo's dad will let anything happen to him—aka me now.
Theo's family was rather big. His father, Lord Alexander Lockheart, was arguably ruthless and cold, but he usually held his family's interest in his mind—knowing him and his militaristic nature, Ethan didn't doubt he'd latch onto the opportunities to make some hefty sum of money—money which he could use to fund his militaristic endeavors. The man was ambitious.
*Theo's the 4***th child of the Lockhearts. Even aside from Theo's dad, he's got five siblings: three older and two younger siblings. Two of whom, I can easily rely on. The eldest sibling, Maximillian, or Juliana, who is the second eldest. Benson's the third child, and he doesn't like me much, so Maximillian and Juliana are my only hope—though they're kind of disappointed in how Theo behaved, they wouldn't let something happened to me*, especially knowing that I, "Theodore Lockheart", am turning over a new leaf. Not to mention Theo's mom's too soft.*
Knowing his safety wouldn't be an issue, Ethan looked at Jack. He had only spoken like Theo to make sure he could set a proper boundary with Jack. Deciding that the awkward silence had gone for far too long, he spoke with a lighter tone.
"Though, if you must know, the Blight doesn't discriminate. It cripples the poor, yes, but it also weakens soldiers and undermines trade. A healthy populace is a productive populace, one that can pay taxes and contribute to the well-being of the entire barony. Besides," he added, a sly smile returning, "imagine the profit. Affordable, effective soap for all? It would be a goldmine. I'm especially looking forward to the reaction of noblewomen. They'll be in a frenzy. They'll be begging for this soap. We'll be swimming in coin."
Which I need given the looming tax and Holden's fucked up financial situation...
Unaware of what was going through Ethan's mind, Jack tapped his chin thoughtfully. "And, with all due respect, my lord, why do you need my help? What possible use could a [Necromancer] have in the realm of soap-making?"
Ethan leaned back, a smile playing on his lips. "While your skills in manipulating life force are undoubtedly impressive, Jack, it's your less publicized talent I'm particularly interested in."
Jack's eyes narrowed for a moment. "You mean...?"
"Imbuement." Ethan said.
Ethan wasn't too sure, but given that [Necromancers] and [Witches] were infamous classes, he'd heard rumors. They often imbued objects. Corpses in [Necromancers'] case and certain objects in [Witches'] case. It wasn't mana that they imbued exactly, but something else—which he had no clue about—that let them have control over the corpse/object they imbued. But, given that these two classes were the most affordable ones that could imbue anything at all and were experts in that regard, Ethan was pretty sure Jack could achieve his goal.
That was his theory, of course. It all depended on how long they could hold the mana inside the soap. Making the soap affordable and high quality—that he could handle. Keeping the mana within it, though, and getting some decent returns? Well, that depended a lot on Jack.
Jack ran a nervous hand through his scraggly brown hair, his eyes glinting.
"What if we could imbue the soap with mana?" Ethan said. "It would disrupt the Blight's ability to feed on life force. Think of it as a sort of 'static' that interferes with the Blight's 'signal'. So, we imbue mana into soap."
Jack frowned, considering this. "That's an interesting idea, my lord. But how would we create such a thing? Soap is expensive to make; you would have to employ mages—"
"Leave the soap to me. Deal with imbuing mana instead. As a [Necromancer], you have a unique understanding of life force and how it can be manipulated. I believe that with your help, we can develop a method to imbue soap with mana that stays in for as long as possible—you are the expert in imbuement, after all. The soap would then not only clean the body, but also create a sort of protective barrier against the Blight." He leaned back in his chair, watching Jack's reaction closely. "So, what do you think? Are you up for it?"
-2-
Ethan hummed as the carriage came to a stop near the house where those infected by the Blight were being kept under quarantine, in the company of Roland. The house wasn't luxurious by any means, it was quite small really. But it had been secured to allow them to observe the tainted. Ethan exited the carriage along Roland and Jack, and soon they were greeted by a tall, slender man in robes.
"Ah, Lord Theodore. It is my utmost pleasure to meet your esteemed self." the robed man bowed. His voice was even, but there was a wariness there—clearly, the man was not comfortable dealing with Ethan, or more like, Theodore who was infamous for his... nature.
Ethan wasn't happy with how the people of Holden and everyone acquainted with Theo regarded him, a reputation that likely spread more than just this town, but he couldn't do anything about it. Logically, he'd just need to deal with it one step at a time.
"No need to be so tense... Sir Miller." Ethan briefly checked his memory to bring up the information of the man.
Miller was the head physician of Holden.
"Esteemed guest," The man was still bowing, clearly uncomfortable and unable to bring himself to stand straight before a notorious lord such as Theodore. "Do not concern yourself with trivial manners and come in. The tainted have been secured, and preparations made, so please, this way."
The man led Ethan inside and after crossing through an empty room, they reached a space sectioned off by iron grills. A group of men armed with spears surrounded the door from the outside—they were armed with spears so they could deal with anyone that reached the third stage and became a brain-dead zombie without getting near them. The tall and burly men eyed Roland and Ethan, on alert at a noble's presence.
Ethan covered his face in a mask, stepped over the grills, into the open hall with rows of beds lining both sides, where about ten people lay, most on their back. If they noticed their Lord, the people lying on the bed didn't act like they noticed anything. "Please, Lord Theodore...!" Miller said. "You mustn't get near!"
"Nothing to worry, I won't be tainted," Ethan said. He was a [Mage] after all, and unranked one, but a mage nonetheless. He looked at the patients one by one.
They do look sickly... it is one thing hearing about it, but this is far more eye opening... Sighing, Ethan turned around and walked out.
"Jack, do your thing."
"Yes, my lord." Jack said as Ethan made it to Roland.
"Roland, we need to go to the Deadwoods, you and I."
Roland appeared apprehensive but did not question Ethan's intentions.
As Ethan and Roland walked out, Jack got started on the subjects. Ethan looked ahead. Grassy meadows stretched far and wide, dotted by occasional trees and bushes. The sun's golden rays washed over the land, leaving an orange tinge on the distant mountains. To the west of Holden lay the Deadwoods—easily spotted, as it stood as an ominous expanse of darkness in the otherwise brightly lit region. A mountain range stretched behind the Deadwoods and clung to the earth, meeting the borders of Corinth.
Ethan had to admit, the place was a sight to see despite how much the Deadwoods stood out like a sore thumb amidst all this greenery. Even then, the Deadwoods held a unique allure. Ethan got into the carriage with Roland in tow, then with a light jolt the carriage started moving. It was being pulled by two horses.
"With all due respect, my Lord, this seems unwise, no?"
"It'll be fine," Ethan reassured. "We have guards with us, and I have you to protect me."
"Why, is it not better to simply let us know what you require so we may fetch it in your stead?"
Ethan smiled, but didn't answer.
The Deadwoods soon came closer as the carriage sped up, drawing near to a stretch of meadows with trees scattered every few paces or so.
The carriage rattled as it went over a particularly large bump. Ethan gave a quick glance at Roland—the man had grown quieter since their departure. Clearly, he was contemplating what sorts of heinous plans his new lord had in store.
Suddenly, the carriage lurched to a halt. Ethan poked his head out of the window and called, "What's the hold-up?"
The driver gave an apologetic bow. "There's a large rock in the road, my lord."
"Then have the guards get rid of it." Ethan's voice carried a subtle note of annoyance. He really didn't have time for delays—as a rule of thumb, he usually hated them.
"My lord," Roland said. "It's a trap. We're under attack."
An arrow slammed right beside Ethan's head the next instant.
First < Previous Next >
Patreon Discord
2024.05.21 06:52 Glittering-Mouse1909 Collection advice
I just received a voicemail earlier in the day about a medical bill going to collections from Medicredit. I logged into the payment plan system of the doctor’s office I went to, and the balance is still active, should I pay the bill through the website or do I have to pay through the debt collector?
submitted by Glittering-Mouse1909 to CRedit [link] [comments]