Manual general electric rc 24993-c

Luthier

2010.07.16 20:52 mlambir Luthier

[link]


2014.03.01 17:20 Luthiery: dedicated to the production of stringed instruments

Here we talk about all aspects of conceptualizing, producing, repairing, and marketing **acoustic** stringed instruments. Feel free to ask for advice, post works in progress, write up how-tos, post useful links, or just to present your own creations and the methods behind them.
[link]


2015.03.30 22:23 FINISH HIM! On the go!

Come discuss strategies, questions, and card collections for Mortal Kombat Mobile!
[link]


2024.05.14 03:39 danohero5291 Remastered Siege Battles Rant (not happy edition)

I just played my first massive siege defence in Carthage as the scipii and holy f**k it was painful. Carthage lays siege with 3000 troops, I have 1000. 2 turns go by and they assault the walls with 2 ladders, one tower and one ram. This is a minor city with stone walls. Auto resolve tells me I'm about to get @$$ cucked but of course you still fight it manually to wear down the enemy.
Battle starts and the gates are open from a spy but they still assault the walls with ladders and towers. Fair enough but once they take the gates, THEY CONTINUE SENDING TROOPS UP THE TOWER AND LADDERS ALL AT WALKING PACE. The entire battle was just 2 units walking in, getting wrecked and then running away for about 40 minutes at max battle speed the entire time. IT WAS ABSOLUTELY BORING TO POINT I WAS SCROLLING THROUGH YOUTUBE SHORTS 5 MINUTES INTO THE BATTLE.
The remaining 2 general units and one unit holding the ram just bugged out and refused to move so I was forced to send out my general to bait them in, but admittedly forgot the gates weren't mine anymore so he dies from arrows. It's at this point I hit the ESC key and click "Exit to Desktop"
I don't know how else to describe my first experience defending a massive siege assault like that other than just monotonous and painstakingly boring to the point I was actually getting ancy sitting in my chair. I'm really trying to enjoy the remastered but it just continues to give me reasons not to like it. It's just like really disappointing because RTW is my favourite game of all time.
In the OG Rome arguably they were a little dumb but at least once they had the gates or if a spy opened them they just sent the f**kin army through the gates to fight and surround you.
submitted by danohero5291 to RomeTotalWar [link] [comments]


2024.05.14 03:22 belltestchamber UN38.3 Standard Requirements for Lithium Battery Production

UN 38.3 Standard Testing Items & Procedures

The UN 38.3 standard includes the following 8 detection items:
For lithium batteries or lithium battery packs, a total of 7 items of tests T1 → T5, T6, and T7 are required. However, for lithium battery cells, T1 → T5, T6 and T8 tests are required. Among them, T6, T7, and T8 tests need to use separate samples. And T1 → T5 test sequentially tests the same sample.

Comparison of UN 38.3 & International Standards

Compared with other international lithium battery standards, the temperature cycling conditions specified in the UN38.3 standard are more demanding and longer. Other international standard test items generally use separate samples for testing. However, the T1 → T5 test in the UN 38.3 standard tests the same sample in sequence. The previous test may have a negative impact on the next test, resulting in failure to pass the test. If the lithium battery submitted for inspection is tested for T1 → T5 in the UN 38.3 standard, there will be one item unqualified. Enterprises need to re-test UN3813 standard after process improvement, which will greatly extend the testing cycle.
It can be known from Table 1 that compared with the international standard IEC 62133, the high and low temperature exposure time of the temperature cycling item in the UN 38.3 standard is up to 6 hours, and the low temperature test temperature is -40 ± 2 ° C. The temperature cycle of the temperature cycle test is larger and the test cycle is longer. It is easier to cause the internal materials of the battery cell to decompose and generate gas. In the case of problems in the production process, when the gas generated during the temperature shock reaches a certain pressure, the gas is likely to leak from the weak point of the battery case or the internal seal, resulting in substandard phenomena such as gas leakage and liquid leakage.

Analysis of UN 38.3 Standard Test Results & Causes

First case

In the UN 38.3 standard, the lithium batteries tested in the temperature cycling project are fully charged (100% SOC). Therefore, when subjected to a long-term temperature shock, relatively serious side reactions may occur inside the battery, generating a large amount of gas. If there is a problem with the manufacturing process of the battery, when a certain amount of air pressure is accumulated, the gas and the electrolyte may leak from the gap in the case or the place where the solder is welded.
Problems in the manufacturing process may have the following conditions:
  1. The welding of the battery case and the cap is not firm and not sealed;
  2. There are missing welds, false welds and cracks, and welds have cracks, cracks, etc .;
  3. When the steel ball is sealed, the size of the steel ball is improper, and the material of the steel ball is different from that of the cap;
  4. The positive pole of the cap is not tightly riveted, and there is a gap;
  5. The elasticity of the insulating gasket is not suitable, it is not resistant to corrosion, and it is easy to age.
Problems such as mass loss, leakage, and exhaust during the UN 38.3 standard temperature cycle are mainly related to the manufacturing process. Anatomy of the leaked battery revealed that the battery was subjected to uneven force during assembly, which caused the internal insulation plate of the battery to deform, causing the battery to leak at the insulation plate.

Second Case

In addition, the test also found that some lithium batteries have no mass loss, no leakage, no exhaust, no disintegration, no cracking and no combustion after the temperature cycle test. However, due to the chemical reaction between the positive and negative electrode active materials and the electrolyte inside the battery during the temperature shock, a certain amount of gas was generated, which caused a bulging phenomenon during the test.
However, the swollen lithium battery is more difficult to pass the vibration test during the next high acceleration and long time vibration test. The battery is likely to produce gas leaks and leaks, resulting in excessive quality loss and ultimately failing the vibration test. This requires lithium battery manufacturers in the research and development stage, in addition to continuous improvement of electrical performance, but also must fully consider the adverse impact of temperature shock on lithium battery materials.
Starting with lithium battery materials, the stability of each chemical material at the test temperature specified in the temperature cycle of 75 ℃,-40 ℃, and the transition points between 75 ℃ and-40 ℃ was investigated. Find out which materials are liable to generate gas at the test temperature. Through a large number of experiments to improve the process of these materials, or to find other alternative materials, to seek a better balance between the electrical performance and safety performance of lithium batteries.

Third Case

In another case, the lithium cell that swelled during the temperature cycle passed the subsequent vibration and shock tests. However, the large amount of gas generated internally during the temperature cycle adversely affects the welding parts around the shell. The pressure shock of the gas directly causes the welding strength to weaken in some areas. In the external short-circuit test after the impact test, the lithium single-cell battery rapidly heated up, and a large amount of gas continued to be generated inside the case. When the internal pressure of the shell rises to a certain value, the gas is released from the area where the welding strength becomes weak, causing the shell to rupture. As a result, the external short-circuit test cannot be passed.
The following test chambers are used in the standard UN 38.3:
submitted by belltestchamber to DGBELL [link] [comments]


2024.05.14 03:12 J-Red_dit Roblox DOORS: The Good, The Bad, and The Curious

Roblox DOORS: The Good, The Bad, and The Curious
When you reach door 60 you can go through a crack wall and find yourself in a secret room that leads to The Rooms, a reference to a game of the same name that inspired Doors. When dying to an entity in this place, we are not greeted by Guiding Light (GL) but instead by the yellow Curious Light (CL). The behavior of CL is odd, it’s quite vague and generally less helpful than GL, but it does encourage the player to come back implying that it needs the players help for something. It is suspected that CL requires the player to be able to escape The Rooms because in the recent Backdoor update, upon leaving The Rooms or The Backdoor, the player exits through a doorframe covered in yellow cracks and stars.
Speaking of which, backtracking to Door 60 there is a painting that has no title of a large yellow star. It is suspected this star is a symbol that represents CL.
https://preview.redd.it/ofihp1mdaa0d1.png?width=703&format=png&auto=webp&s=1425154a12a27aceb5407e3fe95c9c444aece319
This painting hides more secrets however. Also in this room are 3 chairs placed together. As far as I remember, these chairs have always been in this room, and I thought of them as significant but with nothing to connect it to. This is no longer the case as of the modifiers update because now, if you enter this room with at least 1 modifier turned on, the painting changes to this:
https://preview.redd.it/27omnf2taa0d1.png?width=699&format=png&auto=webp&s=447ac5c21d33375c81aafcfbac261e0a09341b49
Two more symbols appear on the painting, one of a blue crescent moon, and one of the red modifier icon. If CL is connected to the star icon, then who is connected to the other two? The crescent moon is obviously Guiding Light, sharing the same blue color and the crescent moon icon appearing when using the crucifix. The modifier icon however doesn’t belong to a light we’ve met yet, they have however made appearances. But first I need to talk about what the lights are, and what they want. When a player uses the crucifix, one of the symbols that appears is a closed string of wingdings, which when translated and put through a Caeser cipher translates to, “One Of The Three Architects Marked By Celestials Assists You”. Three architects, three icons, three chairs, three lights. So the lights are referred to as architects, but what does this mean? Game Theory believes the reason they are called Architects is the lights have the ability to change the layout of The Hotel, and GL uses this ability to turn The Hotel into a labyrinth keeping the hostile entities trapped inside.
In The Hotel the players goal is to make it to Door 100. The reason for this isn’t clear, but I speculate that in the upcoming Mines update there is some kind of escape from The Hotel for the player. Guiding Light seems to support the player in this endeavor, remembering the past deaths of players, which suggests that death itself is not an escape from The Hotel. El Goblino mentions other humans he has seen attempting to reach Door 100, so I believe that humans who become trapped in The Hotel need to reach The Mines in order to escape, and every time they die they reappear at the beginning of The Hotel and GL assists them each time. GL assists the player by glowing in certain areas to highlight them, items like the candle and the crucifix to defend against the enemies, and of course providing tips for dealing with the entities upon death. Finally I believe the rift in the Electrical Room that stores items to be used in another run is another power of GL (which is important later). Curious Light as already mentioned is less helpful than GL but nonetheless needs the player’s help in The Rooms. In the Backdoor update CL seems more acquainted with the player and more inclined to help, giving better tips, providing Starlight Vials with his star icon, and placing the levers in The Backdoor to keep Haste at bay further supporting the lights ability to change The Hotel as the Architects.
But what about the third architect, represented by the red modifier icon? With the evidence I have gathered, I believe this architect is a malevolent entity allied with the hostile entities. In a post by they suggest looking at the painting like a coordinate plane, with GL’s icon falling in the Positive, Positive section suggesting to symbolize GL as a force of good, CL falling dead center to symbolize neutrality, both of which makes a lot of sense given their personalities, and finally the modifier icon falling into the Negative, Negative section symbolizing our final architect as a force of evil. How do we prove this? First let’s look at the modifiers themselves, since this light is clearly connected to them. The modifiers are able to control the entities behavior, affect The Hotel, and even disable Guiding Light! This isn’t the only instance of modifiers affecting GL either, when modifiers are turned on GL is not present to give tips on the entities and the biggest piece of evidence suggesting rivalry between this architect and GL is that the more modifiers are turned on, the SMALLER GL’s icon gets in the painting.
(150% knobs multiplier for non-players)
Next we have the red barrier that blocks access to The Rooms when modifiers are turned on. We know this is an ability of the Architects because CL does the same thing for The Backdoor until players reach The Rooms for the first time. Why would the Red Light do this? I speculate it is because it (and GL) don’t have much control over areas like The Rooms or The Backdoor since you can’t use modifiers in those areas.
Finally I want to look at the Tower Heroes collab event. While the event itself is not canon to the lore, I want to point out an interesting detail from this event. When playing a Doors-themed level you typically are assisted by GL giving tips in between each wave of enemies. CL also makes an appearance in this event in Adventure mode giving hints to the secret Void boss fight. However, one particular Weekly Challenge during that event called, “Hotel Visitors” had the player assume the role of Figure defending the Library. This time, instead of GL giving tips we are assisted by something speaking in RED text, which the community referred to as Mischievous Light. They could have just as easily made GL talk during this challenge but they specifically chose to replace GL with something else. Not only that, they gave this Mischievous Light some personality, referring to the enemies as “trespassers”. It just fits so perfectly that I can’t help but believe it to be intentional.
https://preview.redd.it/tsy0yrfpka0d1.png?width=1334&format=png&auto=webp&s=865436166cce588de59c3136776754e4fe14ac08
Now that I’ve thoroughly explained the Red Light/Mischievous Light (ML), let’s circle back to Curious Light. Going back to the Door 60 painting, there is one more detail I’d like to discuss, and that is the fact that CL’s icon is much larger than GL’s or ML’s. I believe this is a representation of how powerful each Architect actually is. This is supported by GL’s icon shrinking when the player adds more modifiers, suggesting that they weaken GL. Furthermore GL and ML seem to possess a different set of powers, while CL seems to possess it’s own unique powers as well being able to replicate the other Architect’s. Like GL, Curious Light does glow on the entrance to and exits from The Rooms, and if we use the Bottle of Starlight bought at the end of The Backdoor on GL’s rift, it creates a second yellow rift. We don’t currently have any more similar powers between CL and ML besides the barriers they both create but I believe ML doesn’t consider CL an enemy like it does with GL (more on that in a second). Finally, only CL seems to be able to affect The Rooms and The Backdoor.
When dying to Blitz for the first time in The Backdoor we are greeted by Curious Light who drops a very strange detail:
https://preview.redd.it/oea3ahgdja0d1.png?width=1334&format=png&auto=webp&s=208f6611b341eca375de1ea38c94f01c459bb26f
We haven’t met anyone in The Hotel that’s been confirmed to be female so who could Curious Light be referring to here? The identity of this character is not yet clear, but the first candidate that people have suspected is Guiding Light, and sure on the surface that makes sense; they’re both Architects and we’ve seen them both talk but not necessarily to each other. But upon further inspection it doesn’t make sense for GL to be this character for one specific reason: the fact that this character decided to give Blitz a name. According to dialogue from GL and a tweet from the devs, the names of the entities in The Hotel were given by the player, NOT GL. If other humans have been to The Hotel then GL has been there for some time and has never bothered to give the entities names, so why would it start now? You know who’s more likely to give these entities names? Mischievous Light, the architect supposedly allied with these entities. This belief is shared by Game Theory, which I was super excited to see in their most recent theory.
So what is ML up to talking with CL? I believe that ML wants CL and possibly the player to join them. If CL is the most powerful architect and has dominion over The Rooms and The Backdoor, they would be a great ally to have. But what about the player? As we’ve discussed, despite CL’s power, they need the player’s help to access other areas, and in The Mines possibly will exist an escape from The Hotel that ONLY the player has the ability to open. If we take the Tower Heroes collab into consideration, ML initially sees players as “trespassers” and wants the entities to kill them. However, what if the modifiers are a test by ML to evaluate the player’s usefulness? Furthermore, not all modifiers are bad and actually make the game easier, so while ML definitely sees GL as an enemy, it may not be the same case for CL and the player. I speculate that Mischievous Light’s ultimate goal is to use the player to help the entities escape The Hotel, bringing death and destruction to whatever unfortunate world awaits behind the exit door.
But that’s just a theory, a DOORS THEORY! Thanks for reading!
submitted by J-Red_dit to GameTheorists [link] [comments]


2024.05.14 03:11 Superb-Grapefruit651 R6 DMA Advise

I’ve been a high elo legit player since the games release regardless id like to continue using the same account but with esp. Im fairly certain i know enough to not receive any sort of manual ban so im mainly worried about the software side cause Im still completely new to cheating. what do I need to set up an undetectable system and continue to play for several seasons? What is the best stuff to buy etc. just general advice, (I already have 2 capable pcs)
submitted by Superb-Grapefruit651 to gamecheats [link] [comments]


2024.05.14 03:06 SnackPatrol Custom TF2 Weapon Servers

Here is the easiest way to get your fix (best way below this one), and this server gets players. Honestly I preferred the one at the bottom due to it the weapons feeling more polished IIRC, and having more I believe, but this one is good too. Lot of fun stuff:

-VTF- Custom Weapons Revolution (TF2 Server)

https://www.battlemetrics.com/servers/tf2/22423359 (US server)
Here is the best way to get your fix, because it supports a whole-ass mod (the servers I'm going to mention also get players don't worry), generally gets more full, weapons seem more fleshed-out & legit, and the process of equipping them is built into the mod:

TF2Classic + knockout.chat Custom Weapons mod/servers

(Video of gameplay- dude kind of obnoxious, just skip around through vid to get a feel, it's very fun, also TF2Classic has jump pad tele replacements which are super fun)
Follow these steps:
  1. Download TF2Classic by following these instructions:
TF2Classic Download & Instructions
2) Download this asset pack
3) Use this shit I made in MSPaint for where files go
4) Go here, scroll to the middle under "Verified Servers" and add all of the servers with the name "Knockout.chat Custom Weapons Under New Management" to Favorites in TF2Classic. That site also tells you the player count currently. Or just add them manually:
Knockout.chat Custom Weapons Under New Management:
Server 1 IP: 54.37.80.217:27116 (France) ~100 ping for US, still playable
Server 2 IP: 54.37.80.217:27117 (same deal)
Server 3 IP: 54.37.80.217:27115 (same)

Bad Weapon Rehabilitation (TF2 Server)

No "custom" weapons per se, just a really solid rebalancing of all of them. Nothing really feels overpowered or underpowered anymore, also fun things like flames stay on surfaces & I think spy or engy can radar enemies within a few feet or something to his team? It's really fun and gets full. Here's the site with IPs and stuff (The US server gets full around peak time, esp. on weekends):
https://badweaponrehab.tf/

Custom Weapons US (Down atm while owners work on fixing- TF2 Server)

This Custom Weapons Server is/was amazing, but is currently down since the x64 bit update which is a shame. Had a lot of fun here and I would add it and wait till they hopefully fix things:
https://steamcommunity.com/groups/ctf2w
submitted by SnackPatrol to snacktesting [link] [comments]


2024.05.14 02:55 stvbeev (NJ) Door that is unable to be locked in garage

Renting a two-unit house with a garage. The house’s stairway leads to the garage. There’s no lock on the door. The garage has an electronic opener, but it can be opened manually.
The landlord rents out a “studio” that’s connected to the garage. The folks that stay there usually manually open the door, which breaks the electric lock, meaning we have to manually open it.
We find it sketchy that the garage can just be opened manually, and there’s a door leading directly into our stairwell.
Anyone can advise about the legality of this situation?
submitted by stvbeev to Renters [link] [comments]


2024.05.14 02:41 artofmovingon My fish tanks are getting too warm. Not sure what to do

My fish tanks are getting too warm. Not sure what to do
Pics added for attention and context.
Hello! I have two betta tanks, one 3.5gal and one 5gal. I just moved back home for the summer and my house temperature is usually around 70-74F. We don’t turn the AC on until June ish, so we keep the windows open during the day. I have two different types of heaters, I think one is from Petco (in my 3.5gal) and the other is from Petsmart (in my 5gal). My tanks are both teetering between like 78-84F. Neither of these have like the control switches to set a temperature because they’re both cheaper heaters I’ve had for a while. It’s making me nervous bc I think I lost my old betta, Milo, to a dysfunctional heater. I can’t manually set the temperature to something else, and I also don’t know if I should just unplug the heaters in general?
Extra info: My 5gal tank is about ten years old and the lightbulb acts as a source of heat too. This tank is by my window, but my window blinds are always shut bc the sun beams on my room during the day. My AC vent is on the floor next to my 5gal as well, but it is currently off. My 3.5gal tank sits on the other side of my room and the light does not give off heat.
What should I do? I work a full time job this summer so I can’t always monitor the temperature during the day. I’ve unplugged the 5gal heater for now bc his tank has set at 84F today and I don’t want him to bake. Please give suggestions. I can upgrade my heaters but I also can’t go too crazy on them as they work well in other circumstances. I don’t recall this being too much of an issue last year. Please help! I don’t want them to bake :(
submitted by artofmovingon to bettafish [link] [comments]


2024.05.14 02:33 StinaRDH Home Care Remedies for Prevention, Gingivitis, or Advanced Gum Disease

Hey there, dental hygienist here!
I get asked a lot what people should be using at home to clean their teeth and gums.
I can offer some generalized suggestions based on professional recommendations that I make daily both in and out of my clinic:
Floss, rinse, brush. In that order.
You can water floss some areas, string floss some areas, and change up the method a few times a week. Some of my patients will alternate days so they are using both methods each week for the best plaque and bacteria removal.
Rinse your mouth with a solution that includes cetylpyridinium chloride, sodium hypochlorite, or chlorine dioxide.
Brush gently with a soft bristle brush. Aim your bristles toward your gum line. Switch to an electric brush (Sonicare or OralB is best, Burst brushes are good if you’re on a tighter budget).
Continue to brush and floss daily. Your gums will start to get more firm and be able to tolerate the water pressure of a higher setting on the Waterpik, but it may take several weeks to build up to that.
I do share affiliate links so it’s possible I would earn commission if you decided to purchase any of these things. Here are some branded links for the products I’ve mentioned here though for reference at the very least:
OralB Genius Electric Brush: https://amzn.to/3x4rOfQ
Sonicare Electric Brush: https://amzn.to/3x0TKRH
Burst Electric Sonic Brush: https://www.burstoralcare.com/product/toothbrush-pro?color=white
BurstOralCare.com Probiotics
**If you ever buy anything from BurstOralCare.com use StinaRDH at checkout for a discount. I personally buy my own & my families whitening products, oral probiotics, sonic brush, and string floss from Burst. All the kids in my family use the Burst kids brushes and flossers.
Waterpik: https://amzn.to/3IQKfHy
TheraBreath Gingivitis Rinse: https://amzn.to/43AbfV7
Stannous Fluoride Toothpaste: https://amzn.to/3IRQyup
XyliMelts: https://amzn.to/4alA2hN
You can check the American Academy of Periodontology website and find that their clinical studies show flossing first and brushing last is the most beneficial. Floss, rinse, brush (in that order).
Good luck! Reach out to me here if you have any questions.
You got this!
Best, Stina, M.S.Ed., RDA, CDA, RDH
🫧🪥🦷
submitted by StinaRDH to u/StinaRDH [link] [comments]


2024.05.14 02:22 rad_pepper Bot Vets, Let's Share Tips for our Bug Squashing Comrades to encourage them to help on the Major Order

I used to be only a bug squasher because I thought the robots were scary, until I got taught how to more effectively share liberty with the metal menaces. Let's share our best tips to help encourage our comrades to help with the major order.
These are mine:
Good luck, and go share some democracy with the bots!
submitted by rad_pepper to Helldivers [link] [comments]


2024.05.14 01:49 ApeLeg10n Become a licensed electrician without apprenticeship in Texas?

Hello,
I'm an immigrant with an engineering degree from outside the US. I have general notions of electrical engineering but far from being an an actual electrical engineer. I've recently started a business and required the help from a licensed electrical engineer, but I was disappointed by the time I had to wait to get him to show up and then the work they performed, when I asked the GC about that they told me electricians are in high demand and they often can't keep up with the workload.
I'm planing to open several locations more in the future so since this took several months to get a hold of this technical person and get the job done to somewhat disappointing results I'm considering the option to become a licensed electrician myself since this was the most impactful bottleneck.
I'm very appreciative of people who know their trade, and I hope I don't come across as if I'm trying to belittle this one, but from what I've read the path to become one you have to go through an apprenticeship period instead of a course (see https://www.buildforce.com/blog/how-to-become-a-commercial-electrician-in-texas) I'd like to know if there's another route I can go like attend a class either online or personally to be able to get licensed in Texas, I don't plan to make it a business I'm just trying to eliminate this bottleneck for the my current business.
submitted by ApeLeg10n to electricians [link] [comments]


2024.05.14 01:29 IrixionOne Lock lubrication?

My vehicle automatically locks the doors when going past 15 km/hr. I’ve noticed recently that the driver’s door struggles to lock. Attempting to lock and unlock it manually is a bit “stiff”. Similar thing happens when locking and unlocking using the fob. I can hear it trying to lock, the other doors lock, but the driver’s door sometimes doesn’t lock or unlock.
What would be my best course of action? Can I spray some electrical cleanelubricant where the lock mechanism is from the outside?
submitted by IrixionOne to MechanicAdvice [link] [comments]


2024.05.14 01:24 InverseFlash Respect Nico! (Undead Unluck)

All of you unconsciously prune information. Forget it. Feed off it at your own convenience. I remember everything. Everything. Constantly. The pain of losing my comrades. The sadness. All of the information that composes those moments…never leaves my brain for a second.

Nico Vorgeil is the head of Union's science division. An atheist turned anti-theist, he was recruited for his one of a kind skill in pioneering the understanding of the universe. The only thing that could push him even further was his own union with a woman that had intellect to match his own. However, when she died in childbirth, his Negation manifested, dooming him to suffer endlessly. He died in regret, having betrayed everything he stood for in exchange for a few fleeting moment with his late wife.
But now, Fuuko Izumo's on a quest to give everyone a happy ending. And Nico's the one she wishes that for the most…

Key

Scaling
Notes
  • Feats are listed in order of appearance. Hover over a link to see the chapter(s) of origin.
  • Feats from chapters up to 132 are from the 100th Loop.
  • Feats from 133 on are from the 101st Loop, with this RT leaving off at 206.
  • Character profile.
  • Huge thanks to NegativeGamer and doctorgecko for creating threads that contributed to this one.

Strength

Durability

Speed

Skill

Inventions

General Union Things
Note: Ichico matches his number of inventions, much higher than the other lab members, so it's possible some of these belong to her.
Memory-Wiping
Network
Reach
Other
Single-Person Gadgets
Loop 100
Loop 101
Weapons
Specific - Others'
Specific - Own
Astral Dolls
Psycho-Pods
General
Durability/Shields
Lasers
Other

Negation: Unforgettable

Type: Self-Targeting Compulsory Activation
Tragedy: Ichico Nemuri's death in childbirth is the only memory he has of his wife
Nico's Negation prevents him from forgetting anything his mind has processed since acquiring the Negation. This in turn crushes out the memories he had from before the Negation awakened.

Other

I couldn't forget even if you told me to. Those words. Those memories. I've ingrained them into my soul!!

submitted by InverseFlash to respectthreads [link] [comments]


2024.05.14 01:09 stupidmemory RC-PRO36?

Hi all, I’m looking for a starter drone for my 10yr and the hobby shop guy recommended the RC-PRO36
https://www.rcpro.ca/products/pro36-720p-wifi-foldable-drone-with-15-minutes-flight
Has anyone heard of it, or of RC-PRO in general?
I’m inclined to take the advice of the hobby shop guy, but wanted to hear some other opinions.
submitted by stupidmemory to drones [link] [comments]


2024.05.14 00:55 smithah2 Help with setting up abilities for companions

My first playthrough ever and I'm getting the ha g of things. I have made it to the party camp and am about 10+ hours in and finally getting the hang of combat,etc for myself. However as for companions not so much and I have a few specific questions. I do understand the concept of tactics and have set up my party (Alistair, Morrigan, Leliana) with the general defaults provided, Defender, Controller, Ranged respectively. I know I can further tinker within the tactics to set them up further such as at 50% health do this and things like that. But what about abilities in general? As I level up let's use Leliana for example and I'm going for a ranged archer build I get new abilities every time I level up and it adds it to her hotbar. Am I supposed to be only leaving the abilities I want on her hotbar to force her to use those? Or do I just let the game add them as I level her up? Does having certain abilities on her hotbar make her only use those or will she still just be using everything? Or is it all tied to her tactics which skills abilities she will use? I only have 4 tactics slots so that doesn't seem exactly right. At this point she has Song of Valor up at all times but she has endless abilities Dirty Fighting, Pinning Shot, Critical Shot, Crippling Shot, Below the Belt, and Shattering Shot. Is there a way to optimize what she will activate or will she just use all of them randomly other than the 4 tactics slots I can set up? Or will taking some abilities off the hotbar allow me to manually choose myself if I'm making myself clear.
Thanks to any help. Loving the game so far
submitted by smithah2 to DragonageOrigins [link] [comments]


2024.05.14 00:51 yenom08 Today my car was meant to brake down.

Fortunately enough today I was able to enjoy this glorious victory. A small victory of many to come, but a victory nonetheless.
69,420 days have gone by since we have seen movement and volume like today. I saw my portfolio go green for the first time since the flash crash. Granted there is no green, there is no red. There is only hodl.
Back to the story at hand… I sat for hours as I waited for a tow truck to come grab me, but god were those hours cherished. Reflecting on life, bills, debt, high mortgage rates, general cost of living… selling never crossed my mind and it never will.
I remember why I held in 21’ it was because of the buy button being disabled. We all felt cheated.
I remember why I held in 22’ it was because of the DD & beginning to understand the bigger picture of CS&DRS.
I remember why I held in 23’ it was because I starting gaining a lot of faith in RC & the GS team. They were doing/planning/testing some big stuff.
Now I know why I hold in 24’ it is because when all else fails, I am apart of something bigger than myself. There is no WE, but together all the I’s matter.
All us apes have our battles. 2024 isn’t an easy time to live in if you are not already set. Keep your head up, eat your bananas and DRS the peels when you’re done. (NFA)
As for me, I’m going to buckle up and enjoy the greatest show on earth. Well I guess I won’t be buckling up any time soon.
P.s. if at all, take this as a reminder that you’re doing the right thing here and now. Things happen for a reason.
submitted by yenom08 to Superstonk [link] [comments]


2024.05.14 00:34 NeatStranger Repost(You should buy KitHack Model Club (Made by KSP1 Creator))

It's made by the original creator of KSP1(HarvesteR). The building style is very similar to KSP.
For reference I have about 1200 hours in KSP 1 and < 2 in KSP2.
I bought it yesterday, after watching Matt Lowne's most recent video. Still early access, and there are a few bugs here and there. It has a lot of potential, and is a really good value for the money at it's current price.
I spent a couple of hours last night playing the game in multiplayer. So not super in depth, but enough to reccomend it to anyone who likes KSP.
Matt Lowne's Original KitHack video: https://www.youtube.com/watch?v=Z21bgMhPjvw&t=79s
Matt Lowne and KSP 1 Creator Talk KSP 2 Drama: https://www.youtube.com/watch?v=sJFGDSi8R5o
There is some really interesting commentary in here, where HarvesteR talks about how he would approach building KSP2 by starting with a completely new concept so the sequel isn't compared directly to the original. Then working towards feature parity later. Part of me wonders if he is thinking this way about this game, or a future title. It definitely feels like this game could incorporate orbital mechanics.
KitHack Steam Page:https://store.steampowered.com/app/2107090/KitHack\_Model\_Club/
My thoughts:
Building:
I was so excited to see most of my keyboard shortcuts and flow transfered seamlessly to this game. I spent most of my time trying to build a plane. The method for creating the main body/fuselage of the aircraift, is genius in my opinion. All of the Aerodynamic Parts and fuselage sections are procedural, so you can pull them into any shape you want, although it did seem like there is a limit to how big everything can go.
Controlling:
The part of the game, in between flying/driving the model, and building the model. Is the weakest and still needs a bit of work. Not that anything doesn't work as it should. This was simply the part that I struggled with the most. After you throw your plane, the camera contextually switches into a "Chase" mode behind the aircraft. It felt natural, and I could feel the difference in control based on how I designed the control surfaces.
Multiplayer:
All good here, we were playing sandbox, no real objective. Everyone loaded in fine, and the game didn't have any issues. The experience was almost identical to when I was playing by myself plus other players. I strapped a paintball gun to my plane, and tried to shoot another player who was driving a boat in the water.
Graphics:
The graphics looked great and ran really well. Take this with a grain of salt thogh. (13900K/4070Ti)
Final Thoughts: I like to build things, but building things in the real world sometimes hurts my ambition when things just don't go the way I want them to. To recharge, I play simulation/building games. KSP1, Stormworks Build and Rescue, Mars First Logistics, Hydroneer, Cities Skylines, and Minecraft on occasion. There is no doubt that KitHack Model club will be a wonderful addition to this list. It scratched the itch in my brain to build stuff. I was thinking about ways to improve the aerodynamic handling of my aircraft while getting ready this morning. It's good, and you should buy it if you can.
[EDIT]
I commented the following down below. These are thoughts that I have been trying to form the right words for and a couple of commenters inspired me to say this:
I think that generally I wrote this post because HarvesteR seems to be one of the few people capable of leading us forward. KitHack is not a KSP replacement, but it shows that he has the capability to build something that could be.
In his most recent interview with Matt Lowne, he talks potential strategy for building and releasing a KSPx(not that it would exist in the same universe due to IP ownership).
He also mentions that a lot of the code for KitHack was built in a modular way that could be ported to a new title in the future.
I bought the game, not because I am dying to play a Model RC game(althgouh I did have quite a bit of fun playing it for the first time). I bought the game, because there is some small chance it's success could lead the team to take on a new project. One the could far eclipse the success of KSP1 and certainly KSP2.
If there is a 1/1,000,000 chance that my $20 helped fund the next great space flight simulator game even 10 years down the line; and I get a pretty fun building/flying/driving/boating game. That seems like a good deal to me. Would I be dissapointed if that never happens? Probably not. I don't expect it, and it probably won't. Would be cool though.
I should add that if you're playing Kerbal Space Program, strictly for space. You probably won't have much fun with KitHack. However, if like me, you spend the majority of your playthough in the VAB or SPH, then this game will probably be fun for you.
submitted by NeatStranger to u/NeatStranger [link] [comments]


2024.05.14 00:18 Outrageous_Web1110 Model Comparison

Model Comparison
When you join the Model Comparison platform you gain access to specific features designed to enhance your sports betting analysis:
Benefits 1. Advanced Model Comparison - RC and BsR Models: The platform allows you to compare Runs Created (RC) and Base Runs (BsR) models side by side. This helps you understand different analytical perspectives on team performance.
  • Detailed Insights: The comparison includes specific metrics such as predicted runs, edge calculations, and recommended bets for both home and away teams.
  1. User-Friendly Interface:
    • Simple Input Forms: Easily input team names and quickly generate model comparisons without any complex navigation or setup.
  • Clear Data Presentation: The results are displayed in a straightforward manner, making it easy to interpret and use the insights for your betting strategies.
  1. Timely Updates
    • Current Line Information: The platform provides up-to-date lines and predictions, ensuring that your analysis is based on the latest available data.
  • Instant Comparisons: Get immediate results when you input team names, allowing for quick and efficient analysis.
Exclusive Content 1. Detailed Analytics - Home and Away Data: Access comprehensive data for both home and away teams, including edge calculations, predicted runs, and performance metrics.
  • General Info: Receive detailed general information for each game, such as current line, delta, and oveunder edges.
  1. Recommended Bets
    • Expert Recommendations: Based on the model comparisons, the platform provides recommended bets, helping you make informed decisions.
  • Specific Bets: Detailed recommendations on oveunder bets for both home and away teams, enhancing your betting strategy with precise insights.
By joining the Model Comparison platform, you leverage these benefits and exclusive content to make more informed and strategic sports betting decisions, using advanced analytical tools and timely updates directly from the platform
submitted by Outrageous_Web1110 to u/Outrageous_Web1110 [link] [comments]


2024.05.14 00:13 seven0seven Load Calculation

I’m currently adding a small office/shed in my backyard with a mini split. My existing panel is 100amp and my house features an electric stove, EV charger, and central AC.
I’ve been getting worried about my 100 amp panel and wanted to do a load calculation.
Do I need to manually do this or will historical data from my smart meter be sufficient?
For the last few years, here is my peak usage.
2021 - 5.4 kVa 2022 - 4.4 kVa 2023 - 9.7 kVa (installed EV charger) 2024 - 8.6 kVa
Can I take this data and calculate amps? For example, 9.7 kVa gets me roughly 40.4 amps? Is this correct? So, 40% of panel size?
Not looking to upgrade panel (at least not yet) as existing service his direct bury and replacement costs will be $xx,xxx.
Thanks!
submitted by seven0seven to AskElectricians [link] [comments]


2024.05.14 00:12 spagetimanfrick Washer door won't unlock

Washer door won't unlock
I have a General Electric front loading washer and it randomly won't release the door lock. The "Door Lock" light is flashing and no matter what I do I can't unlock it. My clothes are stuck in there right now and I can't even run a cycle on it. Anyone know what I can do? Thanks
submitted by spagetimanfrick to fixit [link] [comments]


2024.05.13 23:41 doctorgecko Gastrodon

Shellos/Gastrodon

Gastrodon is the Sea Slug Pokemon, and is one of the Pokemon species introduced in Generation 4 of the franchise. It is an aquatic Pokemon that once possessed a large shell, but is now a boneless creature that typically inhabits shallow coastal areas. Most notably, Shellos and Gastrodon's appearances vary depending on where it has adapted to, and both the pink West Coast and blue East Coast variants can be found.
Index
Notes

Shellos

Notable Shellos Trainers: Zoey
Type: Water
Weaknesses: Electric, Grass
Resistances: Water, Fire, Ice, Steel
The unevolved form of the line. The only notable Shellos in the anime is the one that was owned by Dawn's rival Zoey, albeit as one of her most used Pokemon.
Mud Bomb
Other Moves
Speed/Mobility
Durability
Misc

Gastrodon

Notable Gastrodon Trainers: Zoey, Paul, Cynthia
Type: WateGround
Weaknesses: Grass
Resistances: Poison, Rock, Fire, Steel
Immunities: Electric
(Bolded types are types it is extremely weak/resistant to)
The evolved form of the line. Gastrodon has been used by multiple notable trainers, including both Ash and Dawn's main Sinnoh rivals, and even the Sinnoh Champion Cynthia.
Muddy Water
Water Pulse
Ice Beam
Stone Edge
Other Ranged Moves
Strength
Speed/Mobility
Durability
Misc

Scaling

submitted by doctorgecko to TeamRocketMegaRT [link] [comments]


2024.05.13 23:41 KuduBuck New Pool Build Advice

I am looking to build a 24’x48’-ish saltwater gunite pool with a built-in hot tub similar to this picture and I am in the early planning stages.
For a little back story, I am a general contractor and own my own underground utility construction business. I started my own business building houses 20 years ago and I have been in commercial construction for the last 12 years. I built my forever home a few years ago and I did all the excavation, concrete prep, as well as 100% of the plumbing and electrical with myself and a few employees. Point being, I can handle every aspect of the pool except spraying the gunite and plastepebble finish. I just want to hear opinions about equipment so that I can start my research and planning based off of that.
I want to do gas heat for the hot tub, a heat-pump for warming and cooling of the pool. Lighted bubblers on the tanning deck. Lots of underwater lighting. Two watefire bowls. Possibly an infinity edge on one side. High quality pumps and filters. High quality automation that works off of an iPhone app, as well as any other add-ons that you can recommend.
I’m looking to use higher-end components that will last 20 plus years but I don’t have to have the top-of-the line just to brag that it was expensive.
What do you recommend?
submitted by KuduBuck to swimmingpools [link] [comments]


2024.05.13 23:40 RealPingGaming GE Electric Dryer Makes Long Buzzing Sound Multiple Times While Drying

I recently bought an electric dryer from general electric and during its drying cycle it makes a very long and very annoying buzzing sound. You'd think that this buzzing sound just indicates that it's done drying but it will do this long buzzing sound multiple times throughout its cycle usually towards the end. It does it around 2 to 3 times before turning off. Is this normal? I've included a audio file for what the sound sounds like.
Link to audio
submitted by RealPingGaming to appliancerepair [link] [comments]


http://activeproperty.pl/